i tried to update my xperia x2 but i felt the phone is not responding and i disconeccted it then when i start it it worked but the i install some apps and the restarts and never start up again the phone give a small tone on the orange microsoft screen and after a few seconds it's turned off.
any one can help me please ?
thank you for replying back to me and helping me solving the problem.
you are the best
Can you share the solution? Thanks...
don't worry bro, just Repeat the same process(means update process) using SEUS.
follow the instructions as required by the SEUS.
i did the SEUS update again but it failed so i had to take it to a pro man to fix it.
Since you posted this a while ago, i am wondering if you found the solution to your phone. I see the same issue with my X2, the screen is just dead and does not start..
How was your issue fixed??
shrayyef your problem will be solved if you follow exactly what I'm going to say.
I had the same problem with se x2 and I tried many many many times untill I solve the problem all you need install update service of sony ericsson and make update for your phone if it doesnt work try to find a good computer with a good usb port because X2 needs 0.2 port I hope it will work for you and good luck man
There's no update service available for X2 anymore.
This is same with my problem
my xperia x2 now isn't on if i press power button.. only vibrate..
anyone can help this problem..?
Related
Hi all.
Need some help really bad. Tried to upgrade my magician (s100) to ROM 1.11.133WWE from qtek.se.
Did exactly as it said I had to but as soon as I started the upgrading my magician went all dead and black and the install shield wizard went down. The only thing left on the computer screen is a box that says: "checking the information on your device... please wait...
Please dont disconnect your device from your PC until the update is completed".
So what do I do?!?!
Am desperate to get my device working again!
Please please help me!
I'm really sorry to here this ... anyway..
As far as I know.. u have my to disconnect ur PPC from the USB cable, then restart PC, u should continue to upgrade after u PC restarts..
u may also try to change the port of the USB cable as well...
this may work on Win XP, I don't know anything about other OS..
I'm not sure about this since I did not face this problem b4..but this solution was reported in another forum ( and maybe here )
I hope this will help...and maybe someone else could give u more INFO...
cheers
Alive!
Got it working!
Did a couple of reboots and that made the trick...
Now, my only problem is that I cant seem to restore my backup-files
Does anyone know where I can download the free program o2plus that I had earlier? Can´t find it anywhere. Loved that thing...
Thanx!
I believe it is better if u do a new fresh installation of everything instead of making a restoration
many users reported problems when restoring after an upgrade...
mostly, ur device will become very slow ....
Hey people
My last post wasn't really good and not clear.
So now i did a new post with exact information.
PS : Well my english is very bad so i try to explain everone.
Well Im try to flash my xperia x10.
My phone can't boot so i can't make usb debug via my phone
X10_R2BA023
I downloaded it
At first step one works correctly, but first time i had problems cuz i had java 64 bit.
But now i googled everywhere and first step works.
So step 2 thre i got problems, i hope to find a answer here.
Install, please wait.
Error: device not found
Error: device not found
Please select sdcard nr.6
press any key to continue so im stuck here is there any hope that my phone will work again?
There is no Android Os anymore on my Phone. I also called the hotline of Xperia they told me i cant access anymore on system.
Any hope to fix this?
I usually get exclamation mark ( yellow ) + a black mobile phone..
Thanks
And restore via SEUS don't work it fails each time.
Hello guys,
i have a new SE X2, and normally when i get a new mobile phone i want to update it. But now comes my problem, on SEUS after i presses quiter and power button and connect to pc after that nothing happen only normaly starts.
Do have anyone a idea how to solve this problem?
thank you very much for help
ps. sorry for my bad english
is it able to update the software from sd, like on X1? or is any special driver needed to run SEUS for X2?
Maybe another software exists to update the X2, but i havent found anyone
there be search button
http://www.youtube.com/watch?v=MOxqEWaastA
http://www.youtube.com/watch?v=w-mZQmMFRxE
http://www.youtube.com/watch?v=jGFdXc49vl8
http://www.youtube.com/watch?v=GYhFfJO2qUI
on all this links u can see how i try to repair my phone without success even i use PC Companion, SEUS, or Flash Tool, more then that u can see how is behave my phone when is plugged to charger...i know is a way to repair but i`m not able to find it...anyone here can help me?
Thanks for your time to watch that clips and i wait for advices!
Hellspawm said:
http://www.youtube.com/watch?v=MOxqEWaastA
http://www.youtube.com/watch?v=w-mZQmMFRxE
http://www.youtube.com/watch?v=jGFdXc49vl8
http://www.youtube.com/watch?v=GYhFfJO2qUI
on all this links u can see how i try to repair my phone without success even i use PC Companion, SEUS, or Flash Tool, more then that u can see how is behave my phone when is plugged to charger...i know is a way to repair but i`m not able to find it...anyone here can help me?
Thanks for your time to watch that clips and i wait for advices!
Click to expand...
Click to collapse
How you came to such a stage??? Have you tried to unlock the bootloader or was it a result of unsuccessful custom rom flashing.....
Please tell in detail about how your phone came to this stage...
well
i find ginger v7 at this link
http://androidforums.com/x8-all-things-root/298647-new-v7-rom-2-3-5-gingerxperia-rom-x8.html
and i try to install in my phone...i did the steps as he say there how to install...and after i got what u see ... before i tried with ginger v5 but i got like answer from mobile the archive is bad...i try with v6 and my mobile after he start to looping on Sony Ericsson logo...and to fix i download SEUS , i update my mobile and it works...but now is not working anymore...i see the led is flashing red color and i think maybe i`m out of battery..i plug to charger but for 30-45 minutes the led stays open green and after is becoming again red and is flashing...this is the story. I think u know when u install a new software in xrecovery after is finish u have the menu to reboot the phone after u choose install from SD card...now with this ginger he says is done but the menu was at last step to choose the backup from sd card...and i press 2 times back key to see the menu to reboot...i select reboot and the rest u see on that clips. Maybe the battery is burn and she don`t want to charge? and because i`m out of power i got this results?
Hi..
I am having problems with my phone.. I tried to upgrade the ROM to gingerbread 2.3 and I followed the instructions in this forum in upgrading the phone. However, when I was in the xrecovery mode to continue with the update, and searched and installed gingerbread from SD it says "successful" then rebooted the phone. but after Reboot m phone is stucked in the "Sony Ericsson" text, not even getting through the sony ericsson logo..
I tried the repair from PC Companion but the download is not going through for the update software, it always say that there is a problem with my internet connection but my internet connection is fine, I am able to connect to my emails and social networking sites..
Hope someone will help.. please...
If PC COmp doesnt work, try SEUS otherwise register at wotanclient. its free to flash...
http://www.wotanserver.com/
thanks.. I will try it now..
I forgot to ask, where to get SEUS? thanks
jincronics said:
I forgot to ask, where to get SEUS? thanks
Click to expand...
Click to collapse
sonyericsson website