Database Users

[Q] having a problem with mattcleofroyo1.8 i need help please fellas

black screen after launching android please help
im using im using radio verion 2.10.50.26 rom verion 13.sep.2010 energy leo build but when im using andriod if i leave my phone sitting for about 5 to 10 minutes the screen goes black and it wont wake back up at all but the buttons are still lighting up though? ive been taking battery out and putting back in to get it working again is there away to correct this issue im having?

Try another WM ROM. And what radio do you have currently installed?
And please, please use the dammed search function...

JanssoN said:
Try another WM ROM. And what radio do you have currently installed?
And please, please use the dammed search function...
Click to expand...
Click to collapse
ok im using radio verion 2.10.50.26 rom verion 13.sep.2010 energy leo ive tryed the cell core evo roms have same problem

Kastro1784 said:
black screen after launching android please help
im using im using radio verion 2.10.50.26 rom verion 13.sep.2010 energy leo build but when im using andriod if i leave my phone sitting for about 5 to 10 minutes the screen goes black and it wont wake back up at all but the buttons are still lighting up though? ive been taking battery out and putting back in to get it working again is there away to correct this issue im having?
Click to expand...
Click to collapse
Try to update kernel, uncheck auto brightness.

justwonder said:
Try to update kernel, uncheck auto brightness.
Click to expand...
Click to collapse
Good idea. Also try to flash another radio, I've read that 2.10 causes alot of SODs. Maybe try 2.12 or even 2.14

try not to remove the battery, as it can corrupt your data. Preferably reset the phone.
If I run into any trouble with android I do the following:
- download a android focussed rom (like chuckydroid)
- download the latest radio (2.14 is doing great for me btw)
- download a android build I like (some builds run better than others)
- format the SD card using a card reader (FAT32, 64 kb clustersize)
- task29 (format NAND)
- flash radio
- flash chuckydroid
- transfer the Android folder to SD card (which is a class 6 one btw)
- boot into awesomeness!

i had the same problem, i upgraded my radio to 2.12 from 2.10 and it's been working fine now

[Q] Android on 512 mb ROM HD2

hi There!
this thread is about to install or run Android on non T-Mobile 512 mb ROM based HTC HD2.
i have non T-Mobile HD2, means i have 512 ROM (flash) based HD2, can i have android on it? i tried a lot but screen fades out and android wont boot. Do i need any update or what?
please help

its getting hot, im feeling alot of flaming about to happen newb, just use the search button or heres a link and [email protected]!!!!!!
http://forum.xda-developers.com/showthread.php?t=734335

Did you really try to install android on your internal memory?
If yes, please search for the next corner and shame on you..

your internal memory (the 512 mb) is called NAND. This won't be touched by Android (well...just take this for granted).
You'll install android on your SD card.
Good luck!

Hey hey i was not saying that to install on ROM, i was asking that how can i run android (froyo) on my HD2 which have 512mb ROM.
means i dont have t-mobile version.
Otherwise i know i should keep the files in micro SD card and then run it.
When i try to run on my HD2 screen fades out and nothings come back. i need to pull my battery out to restart my phone.

meltedmoon said:
Hey hey i was not saying that to install on ROM, i was asking that how can i run android (froyo) on my HD2 which have 512mb ROM.
means i dont have t-mobile version.
Otherwise i know i should keep the files in micro SD card and then run it.
When i try to run on my HD2 screen fades out and nothings come back. i need to pull my battery out to restart my phone.
Click to expand...
Click to collapse
At first, what radio do you use?

bro my radio is 2.06.51.07
other info
os: 5.2.21869 (21869.5.0.82)
manila: 2.5.19211619.0
ROM: 1.66.405.2 (76641) WWE
radio: 2.06.51.07
protocol: 15.30.50.07U

seriously mate, read this
http://forum.xda-developers.com/showthread.php?t=734335
and don't come back untill you understand all of it!
ok, a hint: radio version must be 2.08 or higher. I suggest the 2.14, but you need to read the linked thread first.

ok bro i read it and now able to run android.
But i am having some problems, i installed chucky ROM and then ran 4 types of android ROMs. 2 of them dont work good. but 2 works.
the 1 which ran the best still having problems in it. wifi wont work, camera wont work, flash light wont work. Some times it hang and stand still, i need to remove the battery to restart it. what i do?
which android version is best for chucky ROM?
i will be thankfull bye.

meltedmoon said:
ok bro i read it and now able to run android.
But i am having some problems, i installed chucky ROM and then ran 4 types of android ROMs. 2 of them dont work good. but 2 works.
the 1 which ran the best still having problems in it. wifi wont work, camera wont work, flash light wont work. Some times it hang and stand still, i need to remove the battery to restart it. what i do?
which android version is best for chucky ROM?
i will be thankfull bye.
Click to expand...
Click to collapse
it depends on each persons liking.. but since you're just starting to port to android.. i would recommend these combo, as i think both these works right out of the box as they say.. very fast build.. after you try these combination, you can explore with other builds.. but this would be a great start.. try it
VBNRom (Winmo ROM) i know you said you already have chucky ROM, but this one is light and gives me good compatibility..
NexusHD2 (Android) everything works.. BT, camera, internet (only RMNET) and very fast build..

I use chucky myself, and Darkstone's Desire Froyo. Everything works, and I havent noticed any slowdowns so far.
Its a genuine lovestory, really
Sent from my HTC HD2 (Running Android) using XDA App

all windows phone 7 htc phones have 512 mb rom , and i think wp7 consumes more space than android as it has allot of animations and eye candy items

[Q] Help... I am lost!

Hi All,
Before anyone goes off on one... I am a complete noob, I was advised to come on here and get an Android version to run on my HD2.
The previous owner had put cookies version of the OS on the device, it's great but I would really like to see Android running on this machine.
The problem I'm having is that I haven't really got a clue what I'm doing.
I've downloaded /showthread.php?t=780525 and formatted the sd card (16gig) added the android folder as instructed, tapped the CLRCAD and then tap the HaRET where it loads a black screen with 9 of lines of code and then just hangs there, I've left it for a few hours and nothing, no changes just those couple of lines of code, battery is fully charged.
code looks like this:
HaRET boot
shutting down hardware
turning off MNU...
In preloader
etc etc
9 lines of code... that's it.
I've also tried putting the data.img file in the android folder and outside the folder and not present at all.
The unit is a UK T-mobile.
Any ideas as to what I'm doing wrong here?
Thanks in advance.
Chalkiex
OS version 5.2.21864 (21864.5.0.81)
Manila: 2.5.19202525.0
ROM: 1.43.110.10 (82355) WWE
ROM date: 10/28/09
Radio: 2.04.50.22_2

what radio do you have? to run android you need radio which is above 2.08

Rurph said:
what radio do you have? to run android you need radio which is above 2.08
Click to expand...
Click to collapse
I've got:
Radio: 2.04.50.22_2
ROM: ROM: 1.43.110.10 (82355) WWE
How do I update that? Do I need to do the ROm as well?
Cheers.

Radio's here - http://forum.xda-developers.com/showthread.php?t=611787
.. typically, later the better (like, mine is 2.15.xx). But often, it's just finding the one that works best for you, which can be a case of trial and error sometimes.
I'd also recommend getting rid of stock ROM flashing a WinMo ROM fit for purpose with it's own inbuilt Android booter - try this one - http://forum.xda-developers.com/showthread.php?t=774417
Flashing a radio is the exact same as flashing a rom (presume you know how to do this).
Good luck pal

Hi,
I think I've cracked it with the excellent help from the board members... nice one.
Process I used was:
1. Install HSPL3_pkg.zip
2. update the Radio and ROM as per the above post
3. Transfer the MDJ files to SD card
4. Install as per the MDJ instructions... took about ten minutes and bingo
HD2 running Android and looking very sweet indeed... at last an HD2 that I can honestly say I am pleased to own.
Great work to everyone involved.
Cheers.

Just download and install the official HD2 ROM 3.14, then u don't need to crack HSPL and flash another radio and u can just put a android folder in the root of ur SD card, click CLARD and then hRET.exe and it will work fine

Glad you sorted it. Enjoy.

Best Android build for Elegancia_V5.0_FINAL

I've just installed this custom rom on my tmobile and i was wondering what version of Android runs best on it.
I've installed HD2Froyo_V3 on it and it runs pretty well. (Except for once in a blue moon having to reboot because the 3G gets disabled)
Please let me know of any that run very well on your setups as well
Phone: T-MOUS HTC HD2
Rom: Elegancia MaxSense WITH HTC Messaging
Desire ROM, Android 2.2
Radio: Radio_Leo_2.15.50.14
SPL: 2.08.HSPL
SD: 2GB

jedilost1 said:
I've just installed this custom rom on my tmobile and i was wondering what version of Android runs best on it.
I've installed HD2Froyo_V3 on it and it runs pretty well. (Except for once in a blue moon having to reboot because the 3G gets disabled)
Please let me know of any that run very well on your setups as well
Phone: T-MOUS HTC HD2
Rom: Elegancia MaxSense WITH HTC Messaging
Desire ROM, Android 2.2
Radio: Radio_Leo_2.15.50.14
SPL: 2.08.HSPL
SD: 2GB
Click to expand...
Click to collapse
Give some of them a shot and see which one works best for you.

Everyone in this section will work

I just tried the first android rom here on this thread
http://forum.xda-developers.com/showthread.php?t=820696
and i would get stuck at the Black with Green Lettering HTC screen, after about 4min of waiting i just decided its not worth the wait..
It seems there are certain roms that work with this WMO rom

jedilost1 said:
I just tried the first android rom here on this thread
http://forum.xda-developers.com/showthread.php?t=820696
and i would get stuck at the Black with Green Lettering HTC screen, after about 4min of waiting i just decided its not worth the wait..
It seems there are certain roms that work with this WMO rom
Click to expand...
Click to collapse
After 4 minutes? On a fresh install you should wait 10-15 minutes as to builds the data.img file. That concept is written ALL OVER this forum.
And that is one of the better Builds out right now if you use TMOUS.

JonSolo said:
After 4 minutes? On a fresh install you should wait 10-15 minutes as to builds the data.img file. That concept is written ALL OVER this forum.
And that is one of the better Builds out right now if you use TMOUS.
Click to expand...
Click to collapse
i see..10-15min
sorry for being such a noob, i had no idea it took so long
i will leave my img file building and post my results
thank you for the info

unfortunately...after about 45min of waiting..it stayed stuck on that HTC screen
i even reformatted sd card and tried once again :0(

Make sure the build is in a folder called Android on the ROOT of your SD card.
In the Android folder it should contain the Haret, zImage, and CLRCAD files as well as a Data folder and the other misc files for startup and images. Make sure you click CLRCAD first and then Haret. Do this as close to booting into WM as possible.
Jon

[Q] Clarifying Android for my HD2

Hi all,
I was wondering if you guys could help me getting Android on my HD2.
I've been digging this forum for several weeks now, there is so much information that I don't know what to do!
I've got a European HD2, not the T-Mobile one. The reason I would like to have Android running on it is because Windows 6.5 hangs quite often and it's too slow in my opinion.
After finding out how to check my SPL version, I found that I have 3.03.0000. Is it actually possible to run Android on it?
I've also seen some topics about dual boot and switching back and forth between Android and WM. That's not a requirement for me, I actually prefer just running Android without having the opportunity for WM.
Some specification which I don't know it's useful, but I'll post them anyway;
- OS Version; 5.2.21913 (21913.5.0.94)
- Manila-Version; 2.5.20181527.0
- ROM Version; 3.14.404.2 (04666) NLD
- ROM Date; 10/06/10
- Radio Version; 2.15.50.14
I would appreciate your help a lot!
Kind regards,
Jerome

Flash from SPL to HSPL might going to work, but work better with custom ROM along with the HSPL.
Some user reporting that they can run Android with their stock ROM and SPL, but I don't know. Try it. You should wait a few minute for the first boot....possible at least 5.
If it don't work, then I hope you use the statement I mention in the first sentence.

Could you tell me what do you and what SPL and HSPL is exactly?
I don't have much knowledge yet, but I'm willing to learn!
Thank you for your reply anyway!

If you are willing to learn then you best option is to actually read the threads that already exist instead of creating a pointless one.
First go into the HD2 Rom thread and learn how to get HSPL on your phone and a custom rom and updated radio.
After yu have done that come back to the Android sections and learn how to boot android.

First.. Check what ROM you have currently. By the looks of it with radio 2.15.50 you look to have the latest ROM from HTC installed. Unfortunately there is no HSPL Software for the latest ROM from HTC so you will have to downgrade your rom which will let you use HSPL3 (Linkage)
SPL is the "software" on your phone that stops you flashing non HTC Roms. You use a utility called HSPL (above) to install HSPL on your phone to enable you to flash a custom rom.
Once you have HSPL on you can them flash a custom rom from the forums. I use the OzDroid 1.11 as it has been very stable at running android.
Once that is Flashed to your phone you will need to choose which android version you require. I use MDJ FroYo HD V4.3. Download it and copy the ANDROID folder onto your SD Card.
Re-boot OzDroid and you will be presented with the Choose screen. Windows or Droid. Select Android and it will boot into android. You will need to wait 5-15 mins for android to boot on first run.
Hope this helps.

TheATHEiST said:
If you are willing to learn then you best option is to actually read the threads that already exist instead of creating a pointless one.
First go into the HD2 Rom thread and learn how to get HSPL on your phone and a custom rom and updated radio.
After yu have done that come back to the Android sections and learn how to boot android.
Click to expand...
Click to collapse
man its not that easy, if someone has little background knowledge in all this all the unfamiliar information and new terms can be too confusing. Sometimes you just have to ask questions...
...although i do understand that there are probably thousands of posts started by asking the same exact questions ("which is the best android rom for HD2")and that can actually make it that much harder to wrap ones head around.

Do you need WM ROM, or can u run just Android?
TheATHEiST said:
If you are willing to learn then you best option is to actually read the threads that already exist instead of creating a pointless one.
First go into the HD2 Rom thread and learn how to get HSPL on your phone and a custom rom and updated radio.
After yu have done that come back to the Android sections and learn how to boot android.
Click to expand...
Click to collapse
Q: Do you have to load a "custom rom", I assume you mean WM ROM?
Isn't there a way to load Android straight onto the EPROM Memory of your phone, so that only Android runs and not the full WM in the background? Surely that would save RAM and battery?
I found this thread useful, also trying to wade thru the info.
Thanks

farcry27 said:
Q: Do you have to load a "custom rom", I assume you mean WM ROM?
Isn't there a way to load Android straight onto the EPROM Memory of your phone, so that only Android runs and not the full WM in the background? Surely that would save RAM and battery?
I found this thread useful, also trying to wade thru the info.
Thanks
Click to expand...
Click to collapse
no there isnt a way to do this yet without WM on the phone as well.
however, the "full WM" is not running in the background, its just needed to get the linux module started and then boot Android. Nothing is really "running in the background" but it is running from the sd card.
hope some of this helps.

dezaras6 said:
no there isnt a way to do this yet without WM on the phone as well.
however, the "full WM" is not running in the background, its just needed to get the linux module started and then boot Android. Nothing is really "running in the background" but it is running from the sd card.
hope some of this helps.
Click to expand...
Click to collapse
Thanks for the reply.
Is there then a way to get both android and WM on the ROM of the HD2. Since its about 512MB, there won't be space for much else, but that should save the battery, since android wont be running from the SD card.

5haddex;
Thank you so incredible much on helping me here! I've got OzDroid running now, it looks awesome already, now I need to find my preferred Android built, but that shouldn't be a problem.
Again, thank you so much!

I've got OzDroid up and running now, works great too!
But when I try to boot into Android with the provided CleanDROID, or with CLRCAD and hared, the phone hangs after showing the command line;
Jumping into custom kernel...
Click to expand...
Click to collapse
Even when I let the phone untouched for 6 hours, it won't do anything.
I've tried several Android builds, also trying to "repair" startup.txt with CleanDROID which gives me an error too.
Any thoughts? Maybe try another custom rom? Any tips or links on that one?
Cheers
edit;
what about the EnergyROM with Sense 2.5 Reference?
http://forum.xda-developers.com/showpost.php?p=8581816&postcount=3

Anybody please?

I would appreciate your help a lot!
Different Android builds don't fix the problem too. HSPL 2.08 running..

I've changed my radio to 2.10, the HD2 proceeds to the HTC booting logo, but stays there for an hour now...
Any ideas?