[Q] Clarifying Android for my HD2 - HD2 Android Q&A, Help & Troubleshooting and Genera

Hi all,
I was wondering if you guys could help me getting Android on my HD2.
I've been digging this forum for several weeks now, there is so much information that I don't know what to do!
I've got a European HD2, not the T-Mobile one. The reason I would like to have Android running on it is because Windows 6.5 hangs quite often and it's too slow in my opinion.
After finding out how to check my SPL version, I found that I have 3.03.0000. Is it actually possible to run Android on it?
I've also seen some topics about dual boot and switching back and forth between Android and WM. That's not a requirement for me, I actually prefer just running Android without having the opportunity for WM.
Some specification which I don't know it's useful, but I'll post them anyway;
- OS Version; 5.2.21913 (21913.5.0.94)
- Manila-Version; 2.5.20181527.0
- ROM Version; 3.14.404.2 (04666) NLD
- ROM Date; 10/06/10
- Radio Version; 2.15.50.14
I would appreciate your help a lot!
Kind regards,
Jerome

Flash from SPL to HSPL might going to work, but work better with custom ROM along with the HSPL.
Some user reporting that they can run Android with their stock ROM and SPL, but I don't know. Try it. You should wait a few minute for the first boot....possible at least 5.
If it don't work, then I hope you use the statement I mention in the first sentence.

Could you tell me what do you and what SPL and HSPL is exactly?
I don't have much knowledge yet, but I'm willing to learn!
Thank you for your reply anyway!

If you are willing to learn then you best option is to actually read the threads that already exist instead of creating a pointless one.
First go into the HD2 Rom thread and learn how to get HSPL on your phone and a custom rom and updated radio.
After yu have done that come back to the Android sections and learn how to boot android.

First.. Check what ROM you have currently. By the looks of it with radio 2.15.50 you look to have the latest ROM from HTC installed. Unfortunately there is no HSPL Software for the latest ROM from HTC so you will have to downgrade your rom which will let you use HSPL3 (Linkage)
SPL is the "software" on your phone that stops you flashing non HTC Roms. You use a utility called HSPL (above) to install HSPL on your phone to enable you to flash a custom rom.
Once you have HSPL on you can them flash a custom rom from the forums. I use the OzDroid 1.11 as it has been very stable at running android.
Once that is Flashed to your phone you will need to choose which android version you require. I use MDJ FroYo HD V4.3. Download it and copy the ANDROID folder onto your SD Card.
Re-boot OzDroid and you will be presented with the Choose screen. Windows or Droid. Select Android and it will boot into android. You will need to wait 5-15 mins for android to boot on first run.
Hope this helps.

TheATHEiST said:
If you are willing to learn then you best option is to actually read the threads that already exist instead of creating a pointless one.
First go into the HD2 Rom thread and learn how to get HSPL on your phone and a custom rom and updated radio.
After yu have done that come back to the Android sections and learn how to boot android.
Click to expand...
Click to collapse
man its not that easy, if someone has little background knowledge in all this all the unfamiliar information and new terms can be too confusing. Sometimes you just have to ask questions...
...although i do understand that there are probably thousands of posts started by asking the same exact questions ("which is the best android rom for HD2")and that can actually make it that much harder to wrap ones head around.

Do you need WM ROM, or can u run just Android?
TheATHEiST said:
If you are willing to learn then you best option is to actually read the threads that already exist instead of creating a pointless one.
First go into the HD2 Rom thread and learn how to get HSPL on your phone and a custom rom and updated radio.
After yu have done that come back to the Android sections and learn how to boot android.
Click to expand...
Click to collapse
Q: Do you have to load a "custom rom", I assume you mean WM ROM?
Isn't there a way to load Android straight onto the EPROM Memory of your phone, so that only Android runs and not the full WM in the background? Surely that would save RAM and battery?
I found this thread useful, also trying to wade thru the info.
Thanks

farcry27 said:
Q: Do you have to load a "custom rom", I assume you mean WM ROM?
Isn't there a way to load Android straight onto the EPROM Memory of your phone, so that only Android runs and not the full WM in the background? Surely that would save RAM and battery?
I found this thread useful, also trying to wade thru the info.
Thanks
Click to expand...
Click to collapse
no there isnt a way to do this yet without WM on the phone as well.
however, the "full WM" is not running in the background, its just needed to get the linux module started and then boot Android. Nothing is really "running in the background" but it is running from the sd card.
hope some of this helps.

dezaras6 said:
no there isnt a way to do this yet without WM on the phone as well.
however, the "full WM" is not running in the background, its just needed to get the linux module started and then boot Android. Nothing is really "running in the background" but it is running from the sd card.
hope some of this helps.
Click to expand...
Click to collapse
Thanks for the reply.
Is there then a way to get both android and WM on the ROM of the HD2. Since its about 512MB, there won't be space for much else, but that should save the battery, since android wont be running from the SD card.

5haddex;
Thank you so incredible much on helping me here! I've got OzDroid running now, it looks awesome already, now I need to find my preferred Android built, but that shouldn't be a problem.
Again, thank you so much!

I've got OzDroid up and running now, works great too!
But when I try to boot into Android with the provided CleanDROID, or with CLRCAD and hared, the phone hangs after showing the command line;
Jumping into custom kernel...
Click to expand...
Click to collapse
Even when I let the phone untouched for 6 hours, it won't do anything.
I've tried several Android builds, also trying to "repair" startup.txt with CleanDROID which gives me an error too.
Any thoughts? Maybe try another custom rom? Any tips or links on that one?
Cheers
edit;
what about the EnergyROM with Sense 2.5 Reference?
http://forum.xda-developers.com/showpost.php?p=8581816&postcount=3

Anybody please?

I would appreciate your help a lot!
Different Android builds don't fix the problem too. HSPL 2.08 running..

I've changed my radio to 2.10, the HD2 proceeds to the HTC booting logo, but stays there for an hour now...
Any ideas?

Related

New User with HD2

Hi, I recently bought a T-mobile HD2, the unit isn't unlocked yet but I plan to unlock it and use it with AT&T, anyways I'm interested in running Android on the device. Would updating the HD2 from the HTC website which I believe is the official update website prohibit me in anyway from locking out Android or do anything negative in terms of customization of the HD2 unit?
I am running the updated rom 2.13 I am on t-mobile though and I am able to use android all day but once I restart it reverts back to WM. So I am not sure if this helps you...I was able to get everything running but the calls sounded robotic. I read I needed to flash to a new rom.
Poopmonkey said:
Hi, I recently bought a T-mobile HD2, the unit isn't unlocked yet but I plan to unlock it and use it with AT&T, anyways I'm interested in running Android on the device. Would updating the HD2 from the HTC website which I believe is the official update website prohibit me in anyway from locking out Android or do anything negative in terms of customization of the HD2 unit?
Click to expand...
Click to collapse
Well first, if you have the T-Mobile version of the phone, you do NOT want to use an update from the HTC site, that's for the euro version of the phone. The upgraded stock rom that you can use is available on T-Mobile's support page for the HD2.
Now, flashing to the correct updated ROM will not prevent you from doing anything...you'll still be able to unlock it later, you can still run Android, and you can still do any customizations you want. It's just a newer version of the stock ROM that originally came on the phone.
Hey, thanks so much guys, I'll search for the T-mobile page. I'm glad you guys caught it before I bricked me phone.
BTW, I read that you the T-Mobile Version of the HD2 doesnt use radios. What exactly are radios? I know they mean like firmware versions but what is the term. Also, do you guys recommend flashing a different WM rom or just keep the stock one? I tried to read about Android on the HD2 but I need some user advice. Is Android now stable enough for everyday use on the HD2? Also, could you use applications on the HD2 Android Rom? Will they work as they should? Lastly, why didn't the developers develop a Android rom that you could flash so you didn't have to reboot into it after every Hard Reset?
Poopmonkey said:
BTW, I read that you the T-Mobile Version of the HD2 doesnt use radios. What exactly are radios? I know they mean like firmware versions but what is the term.
Click to expand...
Click to collapse
The US HD2 certainly does use radios, it just uses different ones than the euro version...in fact, that's most of the reason the wrong ROM could brick your phone, because of radio incompatibility. As you said, the radios you see referred to here are the firmware packages used to control the hardware radios in the phone (voice, 3G/EDGE, GPS, WiFi, BT). When you flash a different radio, you're applying a different set of settings to the way all that functions.
Also, do you guys recommend flashing a different WM rom or just keep the stock one?
Click to expand...
Click to collapse
That's generally completely a matter of personal opinion, some people will tell you that using a custom ROM is so critical that if you don't your grandchildren will walk funny, etc....whereas I am doing just fine running the stock ROM and just manually tweaking and hacking it to my liking, part by part. However, if you're going to be running Android on it, there's evidence that having a custom ROM vs the stock will help with some of the known problems with the Android ports that are available.
I tried to read about Android on the HD2 but I need some user advice. Is Android now stable enough for everyday use on the HD2? Also, could you use applications on the HD2 Android Rom? Will they work as they should?
Click to expand...
Click to collapse
There's several builds available, and all of the current ones are remarkably stable compared to the first attempts. But, I believe that that there's still not any that are absolutely 100% fully-functional...each has some minor drawback or caveat, like BT or 3G or the camera not working right, but usually that's the only issue(s). Also, it's been a couple of days since I checked on those, so they may have come even farther since then. One common drawback to all of them though is the heaaavvvy battery drain...but this is also being addressed as quickly as possible. And yes, in every build the apps and marketplace seem to be working just as they would on any factory android install.
Lastly, why didn't the developers develop a Android rom that you could flash so you didn't have to reboot into it after every Hard Reset?
Click to expand...
Click to collapse
That seems to have become the final frontier for Android on the HD2...the release of a fully stand-alone ROM. Trust me, they are working on that, there's tons of members here drooling and waiting for that exact thing. It requires a completely different method of loading Android into memory, so there's a lot more kinks to work out
sirphunkee said:
The US HD2 certainly does use radios, it just uses different ones than the euro version...in fact, that's most of the reason the wrong ROM could brick your phone, because of radio incompatibility. As you said, the radios you see referred to here are the firmware packages used to control the hardware radios in the phone (voice, 3G/EDGE, GPS, WiFi, BT). When you flash a different radio, you're applying a different set of settings to the way all that functions.
That's generally completely a matter of personal opinion, some people will tell you that using a custom ROM is so critical that if you don't your grandchildren will walk funny, etc....whereas I am doing just fine running the stock ROM and just manually tweaking and hacking it to my liking, part by part. However, if you're going to be running Android on it, there's evidence that having a custom ROM vs the stock will help with some of the known problems with the Android ports that are available.
There's several builds available, and all of the current ones are remarkably stable compared to the first attempts. But, I believe that that there's still not any that are absolutely 100% fully-functional...each has some minor drawback or caveat, like BT or 3G or the camera not working right, but usually that's the only issue(s). Also, it's been a couple of days since I checked on those, so they may have come even farther since then. One common drawback to all of them though is the heaaavvvy battery drain...but this is also being addressed as quickly as possible. And yes, in every build the apps and marketplace seem to be working just as they would on any factory android install.
That seems to have become the final frontier for Android on the HD2...the release of a fully stand-alone ROM. Trust me, they are working on that, there's tons of members here drooling and waiting for that exact thing. It requires a completely different method of loading Android into memory, so there's a lot more kinks to work out
Click to expand...
Click to collapse
Wow, thank you so much sirphunkee, you sir are a scholar with your detailed response. Anyways, I apologize but I am intrigued by your response and more questions evolve. Once my HD2 comes I assume it will have a older ROM version and a official T-Mobile Update will be available for me. Now, I'm just wondering would I need to worry about what radios I need or will that be taken care of for me.
Also, I'm still a little confused on the whole radio aspect. For example, in this picture located here:
hxxp://support.t-mobile.com/doc/images/tm54430/tm54430_06.gif
The image version is different one is 2.10.531.1 and the other 2.13.531.1. Are these the radio versions or is this like the ROM version. If so how do I find out what my Hd2s radio is? I mean before I flash a rom how do I find out the radio it contains? For example on your HD2, sirphunkee, in your signature, you have:
ROM: 2.10.531.1 (82076) WWE/5.2.21889 (Stock 6.5)
Sense: 2.5.2012
Radio: 2.08.50.08_2
So I assume that you don't have the latest stock ROM right? Also, what does the WWE mean in your ROM version. Would you recommend me updating my HD2 to the latest stock ROM or not?
Also, I read before you flash a phone you need to install HSPL3 on the phone. This is what I'm told is a bootloader. But then Im also told that usually this bootloader is paired with official or leaked roms so that each SPL matches the ROM, so if I need to flash a HSPL3 on my HD2 before I flash a custom ROM do I need to redo it everytime? I mean the HSPL3 is supposedly hard bootloader that survives a hard reset so it won't be wiped from the device until I overwrite it so does that mean I need reflash it everytime I get a new rom so it matches the ROM?
Anyways, sirphunkee, you mention tweaking the stock ROM, would you recommend BSB tweaks or something else because I read about it and users have discovered that they lose some functions after tweaking their phones. Also would I need to install this if I just plan to tweak the original/stock rom?
Furthermore, is Android on the HD2 currently run over/on top of the WM OS so could that be the cause of the heavy battery drain? Also, is the Android OS on the HD2 booted through an exploit in the firmware of the HD2? If so could this be patched? Just a personal opinion of everyone here do you believe that Android on the HD2 that is flashed onto the HD2's NAND itself will be possible/could this final frontier be achieved?
Again I would like to sincerely thank you for everyone's patience with me, especially sirphunkee. Thank you.
No problem!
Poopmonkey said:
Once my HD2 comes I assume it will have a older ROM version and a official T-Mobile Update will be available for me. Now, I'm just wondering would I need to worry about what radios I need or will that be taken care of for me.
Click to expand...
Click to collapse
Most of the HD2's built or shipped in the past 2 months have the newer ROM on them, but even if yours doesn't then yes you can just go to the T-Mobile site and get the newer one.
Both of the stock ROM's have the radio(s) included, so you don't have to worry about it if you just stay with one of those ROM's. If you flash a custom ROM it (usually) won't have a radio included, it'll just use whatever radio was already on your phone (i.e. whatever one came with the stock ROM originally). You can flash to different radio versions....ONLY ones that are clearly labeled as being compatible with the US HD2...doesn't matter if you're running a stock or custom ROM, but it does require HSPL first before a radio can be flashed.
Also, I'm still a little confused on the whole radio aspect. For example, in this picture located here:
hxxp://support.t-mobile.com/doc/images/tm54430/tm54430_06.gif
The image version is different one is 2.10.531.1 and the other 2.13.531.1. Are these the radio versions or is this like the ROM version. If so how do I find out what my Hd2s radio is? I mean before I flash a rom how do I find out the radio it contains? For example on your HD2, sirphunkee, in your signature, you have:
ROM: 2.10.531.1 (82076) WWE/5.2.21889 (Stock 6.5)
Sense: 2.5.2012
Radio: 2.08.50.08_2
So I assume that you don't have the latest stock ROM right? Also, what does the WWE mean in your ROM version. Would you recommend me updating my HD2 to the latest stock ROM or not?
Click to expand...
Click to collapse
The original stock T-Mobile US ROM (yes, the one I'm running currently) is 2.10.531.1 ("2.10" for short), and the newer one that's been released is 2.13...so that pic you linked there just shows the stock upgrade utility about to upgrade a ROM to the new version (with an included radio).
You can tell what ROM/Radio is on your phone by reading the little text that appears on the bottom of the screen during bootup, and you can also access that info through a settings option once the phone is running.
"WWE" = "WorldWide English"....just means that I have an english-based ROM. Other languages are available by applying ROM's specifically built for that language, but I honestly don't even know if any exist for the T-Mobile HD2, I think they're only available for the euro model.
Since it's very easy to flash the upgraded stock ROM, if your phone comes with the older one I would just suggest running that for a few days and see if it gives you any headaches....if so, then just go ahead and flash to the newer one. There's a number of threads in this section that discuss the differences in the stock ROM's, and the advantages/disadvantages of each. Regardless of which stock ROM you have, the process to flash to a custom ROM is the same either way (HSPL, etc).
Also, I read before you flash a phone you need to install HSPL3 on the phone. This is what I'm told is a bootloader. But then Im also told that usually this bootloader is paired with official or leaked roms so that each SPL matches the ROM, so if I need to flash a HSPL3 on my HD2 before I flash a custom ROM do I need to redo it everytime? I mean the HSPL3 is supposedly hard bootloader that survives a hard reset so it won't be wiped from the device until I overwrite it so does that mean I need reflash it everytime I get a new rom so it matches the ROM?
Click to expand...
Click to collapse
HSPL is "permanent", in the sense that it remains on your phone until you manually flash a different HSPL (like flashing back to stock SPL should you need to return the phone for warranty reasons). Once you have HSPL (yes, a hard bootloader) on your phone (HSPL3 being the latest/best to use), you can flash all the different custom ROMs or radios that you want, without having to apply HSPL again.
Anyways, sirphunkee, you mention tweaking the stock ROM, would you recommend BSB tweaks or something else because I read about it and users have discovered that they lose some functions after tweaking their phones. Also would I need to install this if I just plan to tweak the original/stock rom?
Click to expand...
Click to collapse
There a bunch of different things you can to to tweak a stock ROM, or to futher tweak a custom one, and BsB is just a nice tight convenient collection of some of the more common ones. I use BsB and don't have any issues related to it, but I also skip a few of the settings in it ("tap time" for example) that have caused issues for other users. Besides BsB, I also use HD2Tweak, JWMD Icon Changer, CHT/CHTE, as well as a whole list of other stand-alone tweaks that come in the form of cab files, or manual registry hacks...some are related to performance or function, while some are strictly visual or style tweaks.
Furthermore, is Android on the HD2 currently run over/on top of the WM OS so could that be the cause of the heavy battery drain? Also, is the Android OS on the HD2 booted through an exploit in the firmware of the HD2? If so could this be patched? Just a personal opinion of everyone here do you believe that Android on the HD2 that is flashed onto the HD2's NAND itself will be possible/could this final frontier be achieved?
Click to expand...
Click to collapse
I originially thought the same (that Android ran in parallel with WM and that was causing the batt drain), but from what I read it actually shuts down WM when it runs, so I guess that isn't the cause of the drain...but honestly I haven't been able to keep up with all the finer details of the Android porting that's going on. And yes, a version of Androd that will load straight to NAND at bootup is the final hurdle I was talking about, and that's exactly what a number of dev's are trying very hard to make happen....I suspect that a breakthrough in that is right around the corner, but I'm no dev so take that with a grain of salt!
Hope that helps! It will be a lot easier once you have the unit in-hand and can play with it yourself. Also be sure to look over this thread (if you haven't already): http://forum.xda-developers.com/showthread.php?t=663845
Thank you again sirphunkee! Anyways I just got my hd2 and for the most part I like it. Though, I have a question, how can I backup my contacts so that after a new rom install I dont need to relink their facebook accounts again? Basically, I don't have the same names for my contacts, I only have first names so I have to redo it manually one by one and I want to use activesync to do it but it's telling me I need Outlook. Why do I need Outlook? Isn't that a stupid outdated email application? Also, how do you remove all the bloatware like blockbuster from the HD2? Is flashing a custom rom the only option?
Also, I noticed a problem that windows marketplace apps seem to not install. I try to install Skyfire and I see the progress bar and it goes to like 3/4 of the way and never goes past that.
An unrelated question I want to install HSPL3 I have a SPL 2.10.000 on my Stock 2.13 T-Mobile I'm wondering since in the instructions it tells me, that:
*YOU CAN NOW CHOOSE WHICH VERSION OF SPL OR HARDSPL YOU WANT TO FLASH TO YOUR PHONE*
*You can only select between SPL2.08.0000 or 2.08.HSPL. This is to avoid people with 1024LEO's installing an incompatable version and bricking their device*
What exactly am I suppose to pick? A SPL or HSPL? I mean I want to run Android but will this HSPL interfere with my stock ROM? Also, can someone give me like specific instructions on what I need to pick in the installer?
anyone have a idea? I'd like to experiment with android but i wanna make sure i have the right settings to i dontt have a brick in my hands after I'm done.
Poopmonkey said:
Also, I noticed a problem that windows marketplace apps seem to not install. I try to install Skyfire and I see the progress bar and it goes to like 3/4 of the way and never goes past that.
An unrelated question I want to install HSPL3 I have a SPL 2.10.000 on my Stock 2.13 T-Mobile I'm wondering since in the instructions it tells me, that:
*YOU CAN NOW CHOOSE WHICH VERSION OF SPL OR HARDSPL YOU WANT TO FLASH TO YOUR PHONE*
*You can only select between SPL2.08.0000 or 2.08.HSPL. This is to avoid people with 1024LEO's installing an incompatable version and bricking their device*
What exactly am I suppose to pick? A SPL or HSPL? I mean I want to run Android but will this HSPL interfere with my stock ROM? Also, can someone give me like specific instructions on what I need to pick in the installer?
Click to expand...
Click to collapse
If you're just going to put android on the phone, you don't need to mess with H/SPL at all...you only need that if you're going to flash to a custom winmo ROM before putting Android on there.
sirphunkee said:
If you're just going to put android on the phone, you don't need to mess with H/SPL at all...you only need that if you're going to flash to a custom winmo ROM before putting Android on there.
Click to expand...
Click to collapse
Thanks for your reply once again sirphunkee, but it says in this thread that I need HSPL3 to get android to run stably.
http://forum.xda-developers.com/showthread.php?t=732380
Also, don't you need HSPL3 to flash a custom ROM in the first place as described here?
http://forum.xda-developers.com/showthread.php?t=653614
Poopmonkey said:
Thanks for your reply once again sirphunkee, but it says in this thread that I need HSPL3 to get android to run stably.
http://forum.xda-developers.com/showthread.php?t=732380
Also, don't you need HSPL3 to flash a custom ROM in the first place as described here?
http://forum.xda-developers.com/showthread.php?t=653614
Click to expand...
Click to collapse
I think what that thread is saying is that having a custom ROM is what helps with the stability of Android, not just putting HSPL3 on there (unless that's buried in that thread somewhere that I missed...). But yes, putting a custom ROM on the phone would have the prerequisite of HSPL anyway.
I don't have a custom ROM or even HSPL on my HD2, and I'm currently using the Desire v5 build of Android on here. It seems to run very stable, but I haven't yet gotten a few things working on it (i.e. 3G)...I can't say if a custom ROM would make those things work, but I can say it doesn't ever crash or hang or seem to slow down at all.
I just wanted you to know that HSPL wasn't mandatory for you to be able to try out Android on your phone.
Ok thank you so much sirphunkee again. Anyways, I'm wondering if you know why my weather will not update now when I ask it to on a Wifi connection. I try to update it and just says that its a connection error. And also my windows marketplace app installs seem to stall on the 3/4 complete and they never finish. Could you perhaps help me with that?
Lastly, I was wondering would you be able to tell me if I wanted to put a custom ROM on my HD2 what setting do I need to put on my HD2 for a successful flash?
FIND THE "ANDROID ON HD2" THREAD everything is explained.

[Q] Installing a ROM on my HTC HD2

This may sound like a very stupid question but to be honest, i never done this before. I would like to change the ROM i have on my htc hd2. I get stuck in the process and I been searching on the web and youtube to learn how its done. Of course I dont want to brick my phone so I am cautious of what im doing. Now, I would like to put a rom like an Android one or a ROM that would get rid of all the programs i dont use..mobi tv, blockbuster, etc...Will somebody post or reply to step by step on how its done..from scratch..I will really, really appreciate the help.thx
wiggles0086 said:
This may sound like a very stupid question but to be honest, i never done this before. I would like to change the ROM i have on my htc hd2. I get stuck in the process and I been searching on the web and youtube to learn how its done. Of course I dont want to brick my phone so I am cautious of what im doing. Now, I would like to put a rom like an Android one or a ROM that would get rid of all the programs i dont use..mobi tv, blockbuster, etc...Will somebody post or reply to step by step on how its done..from scratch..I will really, really appreciate the help.thx
Click to expand...
Click to collapse
You will need to read a bit before diving in but start HERE for the step by step.
Then Try the HD2.0 UnOff Series.
How far have you gotten on the process? do you still have a stock HD2 (or have you changed the SPL/HSPL)? is it a T-mobile version HD2(that is important to know)?
yeah, i still have the stock hd2. yeah, its the tmobile version
I would suggest reading the guide in this section
(5th thread from the top, named [TUT] Flashing your First GSM USA 1024LEO ONLY!! (For Noobs) - I would post the link but being a noob to the forums myself, I can't post links yet )
It talks all about what you need to do inorder to be able to flash a ROM on your phone.
As for Android.... there is no Android ROM for the HD2 per-say... it's actually a very basic WM ROM with the loader built in, points to the Android files that you should have on your MicroSD... and then boots into Android. If you plan on ONLY running Android on the phone... I would suggest one like Energy from NRG.... his standard TMOUS ROMs have the Android loader cooked in, and he has an "Android ROM" if you want to go that route.
Been running his 8/25 - 23569 build, been working great... real clean and FAST, and has the Android loader built in, so I get my Android fix when I want it
Ryan79 said:
I would suggest reading the guide in this section
(5th thread from the top, named [TUT] Flashing your First GSM USA 1024LEO ONLY!! (For Noobs) - I would post the link but being a noob to the forums myself, I can't post links yet )
It talks all about what you need to do inorder to be able to flash a ROM on your phone.
As for Android.... there is no Android ROM for the HD2 per-say... it's actually a very basic WM ROM with the loader built in, points to the Android files that you should have on your MicroSD... and then boots into Android. If you plan on ONLY running Android on the phone... I would suggest one like Energy from NRG.... his standard TMOUS ROMs have the Android loader cooked in, and he has an "Android ROM" if you want to go that route.
Been running his 8/25 - 23569 build, been working great... real clean and FAST, and has the Android loader built in, so I get my Android fix when I want it
Click to expand...
Click to collapse
you can load an android rom on a stock winmo rom, it just wont work as well.

[Q] U.S.A HD2 and Android

hay guys sorry id some of you get mad for me posting this here but this is the only place i know my qustion will get answered. OK im new to the windows phone deal. i have a mytouch slide and a g1 rooted so i under that hole part here is my ?.
From what i have read on the forums only build roms work with the hd2. well i would like to put android on it but after looking around most the roms on here and the links on here for putting android on the phone all lead to the LEO forum is the correct or no if not can someone tell me were to get the most resent android rom for the hd2 usa, now there seems to be two ways of installing it one is from sd card and 2 is from boot i would like to do it from boot any help would be grate thanks all and happy modding
Someone correct me if I am wrong...
There are not TWO ways of doing android.
Android is ALWAYS installed on the SD card. The only way to "boot" to it is to have your WM configured to boot the two files from your SD card required to run it, in essence there are a few apps that can do this at WM startup.
You will still need an Android friendly Windows Mobile ROM, so the stock from will not work. You also need a compatible radio.
I would check out the HD2 Android Dev forum for more info though.
JonSolo said:
Someone correct me if I am wrong...
There are not TWO ways of doing android.
Android is ALWAYS installed on the SD card. The only way to "boot" to it is to have your WM configured to boot the two files from your SD card required to run it, in essence there are a few apps that can do this at WM startup.
You will still need an Android friendly Windows Mobile ROM, so the stock from will not work. You also need a compatible radio.
I would check out the HD2 Android Dev forum for more info though.
Click to expand...
Click to collapse
The Android port cannot replace the WinMo OS just yet. The only way is to install it to your SD Card and it will run off of that. There are apps that allow you to choose between WinMo and Android on bootup. The LEO Android forum is correct since Android builds do not matter which device it is booted on.
Android is able to run on the Stock ROM, but people have said it runs better with a different ROM/Radio.
The build I recommend is Energy ROM / Radio 2.12.50.02_2 and an Android Build of your choice, but you can always run it on the Stock if you feel like it.
gaarry said:
The build I recommend is Energy ROM / Radio 2.12.50.02_2 and an Android Build of your choice, but you can always run it on the Stock if you feel like it.
Click to expand...
Click to collapse
+1 EnergyROM w/ 2.12.50.02 radio works very nicely for me.
pactive73 said:
can someone tell me were to get the most resent android rom for the hd2 usa
Click to expand...
Click to collapse
I would look Here (FroyoStone thread) first and see how you like it. Latest release Sep 2nd.
Also when you download the Rom your prob wanna need the rmnt version. Froyostone is the best my far for me and bootloaders are for people with more then one Android Rom on there sdcard
Sent from my HTC Desire using XDA App

[Q] How do I flash my TMOUS HD2, and install Andoid?

I'd like to start off by saying that I know nothing, NOTHING about the technicalities of phones. I know nothing about ROMs, Radios, SPLs (or whatever they are). I'm a COMPLETE noob, but I HATEEEEE Windows Mobile. It's crap.
I've been reading posts on the site for a good three hours now, but there's so much I don't know, I'm confused and lost. So, if ANYONE could PLEASE give me a step by step break down of EVERYTHING I need to do, and download (in order) so that I can put the Android software on my phone, I'd REALLY appreciate it! My Software info is:
OS: 5.2.21892 (21892.5.0.89)
ROM version: 2.13.531.1
Radio version: 2.10.50.26
Please help! Also, can I still use the SWYPE text feature once my phone is on Android?
If ur on gtalk I can help out. [email protected]
I'm in a good mood today.
Sent from my HTC HD2 using XDA App
CluelessChk said:
I'd like to start off by saying that I know nothing, NOTHING about the technicalities of phones. I know nothing about ROMs, Radios, SPLs (or whatever they are). I'm a COMPLETE noob, but I HATEEEEE Windows Mobile. It's crap.
I've been reading posts on the site for a good three hours now, but there's so much I don't know, I'm confused and lost. So, if ANYONE could PLEASE give me a step by step break down of EVERYTHING I need to do, and download (in order) so that I can put the Android software on my phone, I'd REALLY appreciate it! My Software info is:
OS: 5.2.21892 (21892.5.0.89)
ROM version: 2.13.531.1
Radio version: 2.10.50.26
Please help! Also, can I still use the SWYPE text feature once my phone is on Android?
Click to expand...
Click to collapse
Start here: http://forum.xda-developers.com/showthread.php?t=653614
Read it everything... That's how you flash.
Then go here after you have all that down: http://forum.xda-developers.com/showthread.php?t=782173
Read everything. That's how you install Android on your SD Card. You will STILL have windows. Android will run on top of it.
Then pick the Android build you want...
Swype is strong for droid.some androids come with it. I had to try several different versions until one worked, our wouldn't say the trial is over.
Sent from my HTC HD2 using Tapatalk
CluelessChk said:
I'd like to start off by saying that I know nothing, NOTHING about the technicalities of phones. I know nothing about ROMs, Radios, SPLs (or whatever they are). I'm a COMPLETE noob, but I HATEEEEE Windows Mobile. It's crap.
I've been reading posts on the site for a good three hours now, but there's so much I don't know, I'm confused and lost. So, if ANYONE could PLEASE give me a step by step break down of EVERYTHING I need to do, and download (in order) so that I can put the Android software on my phone, I'd REALLY appreciate it! My Software info is:
OS: 5.2.21892 (21892.5.0.89)
ROM version: 2.13.531.1
Radio version: 2.10.50.26
Please help! Also, can I still use the SWYPE text feature once my phone is on Android?
Click to expand...
Click to collapse
In my opinion there is way to much stuff to read for how simple it really is to flash a Rom & Install Android there should be a thread started that tells noobs the easy way.
1st. Download and unzip HSPL , Radio ,Task29, Rom of your choice, and android build of your choice.
2nd. Put your phone in bootloader mode and plug it into computer (hold down on volume while powering on)
3rd. Click the HSPL accept accept next next.... when it is at %100 hold down in volume again to enter bootloader again
4th. Click the radio everything is exactly the same as B4 accept accept nextnext... hold down
5th. Click Task29 same as above ^^^^^^
6th. click the ROM then next next accept accept BUT THIS TIME HOLD BOTH VOLUME BUTTONS WHEN IT REACHES %100 this will hard reset volume up to reboot then your done with the windows install.
7th. Now just plug your phone into the computer make sure it in disc drive mode not that active sync BS and transfer the Android folder you unzipped with the rest of the stuff unhook and use file explorer on the phone find the Android folder Click CLRCAD then CLICK HARET it loads up Android AND VWALAHHH
Very nice. But do you have recommended radio and roms for Android builds?
please help me out.
hmm can i have a custom rom( like for an example: a chucky rom) and a android os in my htc hd2??
Yes...it is explained on this and other threads, also you could have the latest official 3.14 ROM that works with some android builds.
thank you!can you give me some pointers on some good roms to have that will work perfectly with android??
thank you!
jallen2 said:
thank you!can you give me some pointers on some good roms to have that will work perfectly with android??
thank you!
Click to expand...
Click to collapse
In my opinion Energy Roms are the best and MDEEJA has the best android builds I use energy's sencity rom and mdeeja's revolution android build but they are so easy to flash just toy arround with all the different choices here on XDA
wrecless said:
In my opinion Energy Roms are the best and MDEEJA has the best android builds I use energy's sencity rom and mdeeja's revolution android build but they are so easy to flash just toy arround with all the different choices here on XDA
Click to expand...
Click to collapse
thank you
im leaning on having chucky rom and android froyo. will that work?
any suggestion? im looking for a rom with a good phone call and can receive or send text messages
perfectly...
Ok, I've been using this Rom for a while and seems to be the most stable fastest reliable Rom ever flashed .....
PhireMOD skinnyEVO v1.5 .... and I just been updating the kernel , right now I have hastarin.r8 which is the latest today ... emailed for help..
Sent from my HTC HD2 using XDA App
What is the mentality of these people who buy an HD2, do no research, and expect us to teach them how to run Android on them?
IF YOU WANT TO RUN ANDROID, GET AN ANDROID PHONE!
AyanamiZer00 said:
What is the mentality of these people who buy an HD2, do no research, and expect us to teach them how to run Android on them?
IF YOU WANT TO RUN ANDROID, GET AN ANDROID PHONE!
Click to expand...
Click to collapse
Don't B a A$$H()LE that is exactly what this web site is for and you dont have to help anyone if you dont want to just keep it to yourself someone else will help you can just keep doing what you been doing LEACHING off others work like the rest of us
That's why this is a FORUM!! He is here to discuss and learn.... don't be so high and mighty
Sent from my HTC HD2 using XDA App
AyanamiZer00 said:
What is the mentality of these people who buy an HD2, do no research, and expect us to teach them how to run Android on them?
IF YOU WANT TO RUN ANDROID, GET AN ANDROID PHONE!
Click to expand...
Click to collapse
If the HD2 had the proper operating system installed the first time instead of Windows 6.crap then we wouldnt have to ask these questions now would we.
Im confussed too
ok so im running on this right now i have a TMOBILE USA HTC HD2 i install the android and when i make calls it sound robotic everything else works fine.. as my understanding i need to install the HSLP3 and another ROM right??? but which one whould i know its good for me.. so i wont brick my phone im so confused PLEASEEEEE!!!! help me out.. i already read the other instructions.. i just wanna make sure im doing the right thing here.. i just got this phone.. and i love the android on when i installed it its just i cant make any calls.. i can text and do everything else.. please help!!!!!
OS verison:5.2.21892
Manila Version:2.5.20121412.2
ROM version: 2.13.53.1 (90963) WWE
ROM date: 4/28/10
Radio Version:2.10.50.26
Everything that you need to get started with the wonderous world of Android Froyo 2.2 on your HD2 is HERE.

Going from Win Mo 6.5 to Android

Gents,
Apologies if I have missed this in another thread (I did do a search!) or if this si the wrong forum
Has anyone gone from Win Mo 6.5 to Android on their HTC HD2? Was it easy to do? What files would I need to back up etc? And is it worth doing?
Duff33 said:
Gents,
Apologies if I have missed this in another thread (I did do a search!) or if this si the wrong forum
Has anyone gone from Win Mo 6.5 to Android on their HTC HD2? Was it easy to do? What files would I need to back up etc? And is it worth doing?
Click to expand...
Click to collapse
Apologies accepted since you missed alot of threads ! Most of us have Android on our HD2's .
It was very easy but you must do somethings first to guarantee a working Android on your HD2 . (Read the Guide on my Sig. )
You don't need to backup anything as the current Android doesn't touch your internal device memory (i.e. WinMo system files) It will run off your sd card.
Have fun
kawazaki said:
Apologies accepted since you missed alot of threads ! Most of us have Android on our HD2's .
It was very easy but you must do somethings first to guarantee a working Android on your HD2 . (Read the Guide on my Sig. )
You don't need to backup anything as the current Android doesn't touch your internal device memory (i.e. WinMo system files) It will run off your sd card.
Have fun
Click to expand...
Click to collapse
I ran EVO android from SD without having to mod my OEM phone.
Just make sure you do follow the directions and update the kernel as some may leave the kernel out of the bucket of legs and thighs.
It did mess with my time and date everytime I booted back into the phones OS but everything else pretty much was the same.
No speed improvements, may be a wee faster if loaded on phones memory.
Evertything the EVO Android had I had on my OEM phone, just different names on some apps.
Once I got my WM6.5 setup properly Android was usless to me.
Like linux it is a sloooooooooo booter. That is the deal breaker for me.
I like 30 second boots at the most. 20 seconds for a desktop is slow!
HD2 will live!!
HD2 with its name LEO is really a king to the jungle out there with its new era of a great processor, an outstanding screen and a sexy look!!
Wm 6.5 is fine but android really excells in combining wm and ios and making a neat interface with user friendly handling!
I'm so meticulous with my device and using stock rom and radio, i tried android from one of the great builds done by MDJ (thanx a lot to him)
It doesn't do any harm coz i didn't need to upgrade rom nor ram and everything is dealt with thru sdcard
if u don't like it; just format or erase the android folders or just leave it there if u have a big memory
it's awesome by all means!! give it a try u wont loose anything!!
TMOUS stock rom 2.10 and radio 2.08
sevoflurane said:
HD2 with its name LEO is really a king to the jungle out there with its new era of a great processor, an outstanding screen and a sexy look!!
Wm 6.5 is fine but android really excells in combining wm and ios and making a neat interface with user friendly handling!
I'm so meticulous with my device and using stock rom and radio, i tried android from one of the great builds done by MDJ (thanx a lot to him)
It doesn't do any harm coz i didn't need to upgrade rom nor ram and everything is dealt with thru sdcard
if u don't like just format or erase the android folders or just leave it there if u have a big memory
it's awesome by all means!! give it try u wont loose anything!!
Click to expand...
Click to collapse
Hi there
Are you saying, that you've managed to run adndroid on your leo with stock Rom and radio? Thing is, that I would also like to try android on my handset, but I'm too scared to hurt it in any way - hence not too keen on changing rom / radio - which seem to be only way according to info I've managed to find so far
Would you care to share your phone configuration, to see what you're running?
Many thanks.
krzyzag said:
I would also like to try android on my handset, but I'm too scared to hurt it in any way - hence not too keen on changing rom / radio - which seem to be only way according to info I've managed to find so far
Click to expand...
Click to collapse
Your current configuration won't run Android. It needs a radio of at least 2.08.50 (MUST be a .50, NOT a .51!!!) The ROM is irrelevant - only the radio matters to Android.
There is an official ROM upgrade available that takes you up to a 3.14 ROM with a 2.15.50 radio, but I don't know if you can use that without HSPL as you have a branded handset.
It may be possible to just upgrade the radio, from the HD2 ROMs thread, and leave your Windows ROM as it is.
Duff33 said:
Gents,
Apologies if I have missed this in another thread (I did do a search!) or if this si the wrong forum
Has anyone gone from Win Mo 6.5 to Android on their HTC HD2? Was it easy to do? What files would I need to back up etc? And is it worth doing?
Click to expand...
Click to collapse
They are two separate systems - WinMo in the phone's ROM and Android on the Phone's SD Card.
The only real requirement is that your RADIO must be at least 2.08.50 (any one higher than that with a .50 will do). So you need to know what software you already have:
Settings -> About phone -> Software information. Here you will see the Rom, Radio versions. If the radio is not correct, then we'll go through the procedure on how to update it.
The chefs in the Android ROM section give details on what you download and how to set it up.
As for backing up, there should be no need to (as they are independent systems), but better safe than sorry; install SPB Backup. Even if you weren't thinking of running Android, having a backup is always advisable.
mismatch
I have a bootscreen on WM that shows 3.14 as the ROM but in Settings/phone/ software information it still shows 1.48 and a date of 09/29/10.
Is this normal? does this mean my upgrade failed?
Radio release is same on both - 2.15.50.14
modified2 said:
I have a bootscreen on WM that shows 3.14 as the ROM but in Settings/phone/ software information it still shows 1.48 and a date of 09/29/10.
Is this normal? does this mean my upgrade failed?
Radio release is same on both - 2.15.50.14
Click to expand...
Click to collapse
Don't worry about what is says when Windows is running. The value shown then is from the registry, so it can be changed. Have you done a restore from a backup application by any chance?

Categories

Resources