Database Users

[Q] Android on 512 mb ROM HD2

hi There!
this thread is about to install or run Android on non T-Mobile 512 mb ROM based HTC HD2.
i have non T-Mobile HD2, means i have 512 ROM (flash) based HD2, can i have android on it? i tried a lot but screen fades out and android wont boot. Do i need any update or what?
please help

its getting hot, im feeling alot of flaming about to happen newb, just use the search button or heres a link and [email protected]!!!!!!
http://forum.xda-developers.com/showthread.php?t=734335

Did you really try to install android on your internal memory?
If yes, please search for the next corner and shame on you..

your internal memory (the 512 mb) is called NAND. This won't be touched by Android (well...just take this for granted).
You'll install android on your SD card.
Good luck!

Hey hey i was not saying that to install on ROM, i was asking that how can i run android (froyo) on my HD2 which have 512mb ROM.
means i dont have t-mobile version.
Otherwise i know i should keep the files in micro SD card and then run it.
When i try to run on my HD2 screen fades out and nothings come back. i need to pull my battery out to restart my phone.

meltedmoon said:
Hey hey i was not saying that to install on ROM, i was asking that how can i run android (froyo) on my HD2 which have 512mb ROM.
means i dont have t-mobile version.
Otherwise i know i should keep the files in micro SD card and then run it.
When i try to run on my HD2 screen fades out and nothings come back. i need to pull my battery out to restart my phone.
Click to expand...
Click to collapse
At first, what radio do you use?

bro my radio is 2.06.51.07
other info
os: 5.2.21869 (21869.5.0.82)
manila: 2.5.19211619.0
ROM: 1.66.405.2 (76641) WWE
radio: 2.06.51.07
protocol: 15.30.50.07U

seriously mate, read this
http://forum.xda-developers.com/showthread.php?t=734335
and don't come back untill you understand all of it!
ok, a hint: radio version must be 2.08 or higher. I suggest the 2.14, but you need to read the linked thread first.

ok bro i read it and now able to run android.
But i am having some problems, i installed chucky ROM and then ran 4 types of android ROMs. 2 of them dont work good. but 2 works.
the 1 which ran the best still having problems in it. wifi wont work, camera wont work, flash light wont work. Some times it hang and stand still, i need to remove the battery to restart it. what i do?
which android version is best for chucky ROM?
i will be thankfull bye.

meltedmoon said:
ok bro i read it and now able to run android.
But i am having some problems, i installed chucky ROM and then ran 4 types of android ROMs. 2 of them dont work good. but 2 works.
the 1 which ran the best still having problems in it. wifi wont work, camera wont work, flash light wont work. Some times it hang and stand still, i need to remove the battery to restart it. what i do?
which android version is best for chucky ROM?
i will be thankfull bye.
Click to expand...
Click to collapse
it depends on each persons liking.. but since you're just starting to port to android.. i would recommend these combo, as i think both these works right out of the box as they say.. very fast build.. after you try these combination, you can explore with other builds.. but this would be a great start.. try it
VBNRom (Winmo ROM) i know you said you already have chucky ROM, but this one is light and gives me good compatibility..
NexusHD2 (Android) everything works.. BT, camera, internet (only RMNET) and very fast build..

I use chucky myself, and Darkstone's Desire Froyo. Everything works, and I havent noticed any slowdowns so far.
Its a genuine lovestory, really
Sent from my HTC HD2 (Running Android) using XDA App

all windows phone 7 htc phones have 512 mb rom , and i think wp7 consumes more space than android as it has allot of animations and eye candy items

[Q] I need help!

Okay I have been trying and trying to download android onto my Hd2(T9391) but the only thing i get is "jumping to kernel" then a black screen with htc written in green. I have read so many different things about this but i still dont understand what im doing wrong. I am losing my mind not being able to have android on my hd2 so if anyone could help I would deeply appreciate it
And here is some other info just in case...
Manila: 2.5.20191914.0
ROM: Duttys HD2 ML Family ROM (V5) WWE
Radio: 2.12.50.02_2

skunz35 said:
Okay I have been trying and trying to download android onto my Hd2(T9391) but the only thing i get is "jumping to kernel" then a black screen with htc written in green. I have read so many different things about this but i still dont understand what im doing wrong. I am losing my mind not being able to have android on my hd2 so if anyone could help I would deeply appreciate it
And here is some other info just in case...
Manila: 2.5.20191914.0
ROM: Duttys HD2 ML Family ROM (V5) WWE
Radio: 2.12.50.02_2
Click to expand...
Click to collapse
What build are you trying? Is there a winmo recommended Rom that te builder suggest
To use?
Also you need to do a full fat32 format for your SD card, and it takes a good 10 - 15 min
For a new build to install. Make sure all files are in the Android folder.

Try loading it as fast as you can after booting winmo
Sent from my HD2 Android

wolfpack612 said:
Try loading it as fast as you can after booting winmo
Sent from my HD2 Android
Click to expand...
Click to collapse
That doesn't matter. They fixed that problem a long time ago.

mattfmartin said:
That doesn't matter. They fixed that problem a long time ago.
Click to expand...
Click to collapse
I've read that before but I still get it.
Sent from my HD2 Android

My sd card says its in fat32 format so do i need to do it again?

Yes, format it with a full format just so we can eliminate that from the other problems it may be.

some problem with my hd2, any idea?

How long are you leaving it? it takes a good 15 min (depending on the speed of your card) for android to write a data.img file. Sometimes this will be provided for you but most times its better to let android set it up itself.
Leave it for 15 - 30 minutes. It should start up, also check your radio, its should be the .50 series, not .51.

Best Android build for Elegancia_V5.0_FINAL

I've just installed this custom rom on my tmobile and i was wondering what version of Android runs best on it.
I've installed HD2Froyo_V3 on it and it runs pretty well. (Except for once in a blue moon having to reboot because the 3G gets disabled)
Please let me know of any that run very well on your setups as well
Phone: T-MOUS HTC HD2
Rom: Elegancia MaxSense WITH HTC Messaging
Desire ROM, Android 2.2
Radio: Radio_Leo_2.15.50.14
SPL: 2.08.HSPL
SD: 2GB

jedilost1 said:
I've just installed this custom rom on my tmobile and i was wondering what version of Android runs best on it.
I've installed HD2Froyo_V3 on it and it runs pretty well. (Except for once in a blue moon having to reboot because the 3G gets disabled)
Please let me know of any that run very well on your setups as well
Phone: T-MOUS HTC HD2
Rom: Elegancia MaxSense WITH HTC Messaging
Desire ROM, Android 2.2
Radio: Radio_Leo_2.15.50.14
SPL: 2.08.HSPL
SD: 2GB
Click to expand...
Click to collapse
Give some of them a shot and see which one works best for you.

Everyone in this section will work

I just tried the first android rom here on this thread
http://forum.xda-developers.com/showthread.php?t=820696
and i would get stuck at the Black with Green Lettering HTC screen, after about 4min of waiting i just decided its not worth the wait..
It seems there are certain roms that work with this WMO rom

jedilost1 said:
I just tried the first android rom here on this thread
http://forum.xda-developers.com/showthread.php?t=820696
and i would get stuck at the Black with Green Lettering HTC screen, after about 4min of waiting i just decided its not worth the wait..
It seems there are certain roms that work with this WMO rom
Click to expand...
Click to collapse
After 4 minutes? On a fresh install you should wait 10-15 minutes as to builds the data.img file. That concept is written ALL OVER this forum.
And that is one of the better Builds out right now if you use TMOUS.

JonSolo said:
After 4 minutes? On a fresh install you should wait 10-15 minutes as to builds the data.img file. That concept is written ALL OVER this forum.
And that is one of the better Builds out right now if you use TMOUS.
Click to expand...
Click to collapse
i see..10-15min
sorry for being such a noob, i had no idea it took so long
i will leave my img file building and post my results
thank you for the info

unfortunately...after about 45min of waiting..it stayed stuck on that HTC screen
i even reformatted sd card and tried once again :0(

Make sure the build is in a folder called Android on the ROOT of your SD card.
In the Android folder it should contain the Haret, zImage, and CLRCAD files as well as a Data folder and the other misc files for startup and images. Make sure you click CLRCAD first and then Haret. Do this as close to booting into WM as possible.
Jon

[Q] HTC HD2 Telstra help please

Hi Everyone.
This is my first post but i have been an enthusiastic reader for some time.
I know the answers to my problems are out there but im finding there is so much information im drowning and totally lost on what i need to do.
I want to put Android on my Telstra HTC HD2 T9193 via SD.
The SPl is 1.66
ROM = 1.72.841.0 WWE
RADIO = 2.07.51.22_2
Some sources say i need to go back a version before i can HSPL1, Some say i need to upgrade my radio, some say my telstra version is painful to change.
I believe the steps i need to take are:
1.Upgrade to the newest HTC Stock. But i cannot find a ROM to suit the Telstra phone.
2. So i need to use the HSPL method to change my radio?
3. Install HSPL4
4. Install the custom ROM
5. change the radio but i am unsure which one i get?
I think i have it mostly muddled up.
Any help would be greatly appreciated.
Thanks in advance.
Sej

assuming you want nand android
hspl4
choose 2.08.hspl
flash any radio with a x.xx.50.. version, higher than 2.07.50
flash magldr
flash cwm
flash android

Hi thanks.
I actually wanted to use the SD Roms.
Thanks
Sej

Sejanus9 said:
Hi thanks.
I actually wanted to use the SD Roms.
Thanks
Sej
Click to expand...
Click to collapse
Flash HSPL4
Flash radio above 2.08.50 (I'd go 2.15.50)
Run your SD Android ROM.

in addition to what orangekid has posted, in case you're after the custom rom:
Flash HSPL4
Flash radio above 2.08.50 (I'd go 2.15.50)
Flash custom rom
->in my case, i'm using chuckyrom lite for my wm6.5. i noticed that flashing the radio to 2.15, keeping the t-mob stock rom and running an android sd rom caused a lot of lags. not to mention the famous sod (sleep of death).
Run your SD Android ROM.
-> i've been using mccm hd 4.5 and it's simply working great for me. do take note that there are tons of roms you can try. what you can do is try out each of them and determine which one works well for your unit. what may be working flawlessly for me or the other members could turn out to be a lemon for you. thus, try them out and you should be able to find the right rom for your device

Robson said:
in addition to what orangekid has posted, in case you're after the custom rom:
Flash HSPL4
Flash radio above 2.08.50 (I'd go 2.15.50)
Flash custom rom
->in my case, i'm using chuckyrom lite for my wm6.5. i noticed that flashing the radio to 2.15, keeping the t-mob stock rom and running an android sd rom caused a lot of lags. not to mention the famous sod (sleep of death).
Run your SD Android ROM.
-> i've been using mccm hd 4.5 and it's simply working great for me. do take note that there are tons of roms you can try. what you can do is try out each of them and determine which one works well for your unit. what may be working flawlessly for me or the other members could turn out to be a lemon for you. thus, try them out and you should be able to find the right rom for your device
Click to expand...
Click to collapse
This is sound advice Personally I prefer NRG for WinMo and ACA for Android

Hope you've made some progress here... I've been watching this space for more than a year and finally decided it was safe enough to make a move.
My HD2 has the standard ROM, I flashed several radios with varying degrees of success in terms of sensitivity, power consumption, telstra compatability. Settled on 2.15.50.14 for now. Testing continues.
Installed JaguarMIUI-V16.7 on a new class 6 4Gb MicroSD.
I have no luck formatting SDs (x2) for my HD2 (have to reseat sd after bootup to get the card recognised) and this one is screaming and stable without being formatted, just copy on the files into Android and Miui folders in the root of the card.
I have a boot loader installed but don't use it as the build is so stable it's not a problem to open file explorer in Windows, tap clrcad.exe then haret.exe the few time a reboot is required/desired.
Enjoy!

Hi Saj,
I had the same problem..
I found that you had to go backwards to go forward as Telstra Locked the ROM.
Basically i had to comb the web and find an older version of the Telstra ROM...
from there I had to use MAGLDR 1.13 to load the boot file
it did however wipe the WM6.5 completely off the phone.
I am now using a Port for ICS and i have never been happier
I will see if I can find the original post for this on the web and let you know

84DGR said:
Hi Saj,
I had the same problem..
I found that you had to go backwards to go forward as Telstra Locked the ROM.
Basically i had to comb the web and find an older version of the Telstra ROM...
from there I had to use MAGLDR 1.13 to load the boot file
it did however wipe the WM6.5 completely off the phone.
I am now using a Port for ICS and i have never been happier
I will see if I can find the original post for this on the web and let you know
Click to expand...
Click to collapse
Can you post a link to that older version Telstra rom please.

HTC HD2 T-Mobile Help Needed!

Dear Developers, I am a noob and want to install Android on my device, have done a lot of research on this topic but can't find any suitable ROM.
I am having HD2 with the following Configuration:-
ROM Version- 1.43.110.2 (70315) WWE
ROM Date- 10/28/09
Radio Version- 2.04.50.22_2
Protocol Version- 15.26.50.07U
Manilla Version- 2.5.19202525.0
OS Version- 5.2.21864 (21864.5.0.81)
Can anybody tell me how can I port Android 4.0(In SD CARD) with HTC Sense into it. Which ROM will be suited and how can i put that ROM. Or is there any method like- getting Original HD2 ROM and then after that all ROMs support the device?
Every time I search on internet I get confused and sometimes scared about DEAD HD2s. I really love my phone, the only problem is that it doesn't support .NET3.5 Framework and because of that there are very less apps available. Once I get android, my phone will shine like a diamond.
I am really not that concerned of HTC Sense what I want is Android 4.0 or 2.3 with all functions properly working.
Regards,
Arun Wadhwa

You need to read a lot....you have the first original rom and radio version....
Simple things...1.update your rom to latest (god its been 2 yrs since I used wm6.5...I don't remember exactly .was it 3.03 or.3.14 rom? I think ..it has radio 2.15)..
Then flash hspl4....then use the native SD method to get the latest ics or jelly bean rom from the native SD thread....best and fastest sd rom
Search in xda ..not in Google..all the best..
Read android stickies in the forum
Also..hd2 supports net3.5...I had the cab file too ...but it is somewhere on my PC...iam on my tab now....search in xda
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2

pakure said:
.I don't remember exactly .was it 3.03 or.3.14 rom? I think ..it has radio 2.15)..
Click to expand...
Click to collapse
You are right, the last WM room is 3.14 and 2.15 radio
You can find here: http://www.htc.com/es/help/htc-hd2/#download
The change of the room should no be dificult but also depends if your phone company have put some kind of lock in the phone other kind of problem so I´m not going to lie you saying that there is no risk.
About the android room you have 2 choices:
1- Replace WM system by Android, so your phone will be Android
2- Use WM and load Android as a program, so you phone can work with both systems.
I recommend, at least at he beginning, the second one as you don´t take risks if you don´t like Android, you only have to delete the archive
There are several Android 4.0 rooms for SD card, here you have a compilation.
http://forum.xda-developers.com/showthread.php?t=1401767
Choose whatever you like.
HOW TO INSTALL?
As always, when you 3 times is very easy but at first you are lost. Ok, here some help:
1- Download the chosen ROOM and extract it.
2- You will find a folder called Android, copy the folder to your SD card. (Don´t put inside any other folder)
The SD card have to be at least 2 Gb and preferably fast (class 6 o more)
3 - Read VERY WELL the instructions of the room in the web page. Also the comments.
4- Now we launch the room
4.1 In WM explorer open the folder and execute "clrcad.exe", nothing apparently happens but is important for the noise
4.2 We execute Hater.exe and Android will be launch :good:
We wait around 10 -20 minutes, maybe more (depends of the room and SD card speed) while the system is configured Will appear some letters at first, later maybe a logo and finally Android.
5. In some Rooms you have to let "rest" the system 10 minutes more and sometimes reboot (read the instructions)
6. Enjoy.
The better of this is that your WM system get untouched, so nothing wrong is going to happend to our phone, also with a little trick you can have several rooms for test at he same time, but step by step. Try this and if you have any problem commet.
Good luck