[SOLVED]Lost Root!!! - Droid Eris Android Development

Never mind

Nikolai2.1 said:
Well i flashed that flashback rom to 1.5, lost root, cant regain it, cant even go into recovery now.. what do i do?
Click to expand...
Click to collapse
have you tried using quickboot to load into bootloader and go from there? .. only suggestion that i can think of .. hope it helps
edit: correction - you cant use quickboot unless you have root since it requires root access .. sorry bud im stuck on this one ..

Never mind its fine, i fastbooted amon ra, apparently the one i fastbooted before was faulty... im not even sure what it was, not stock, clockwork, or amon ra...

Related

Clockworkmod Rom Manager

Hey All,
I have a super big problem >.<
I was trying to get clockworkmod recovery working on my phone and somehow it made me lose root access on CM6 and also I lost I lost my RA Recovery.
What do I do!?!?!
please help
PS: I still have S-On my phone
jvward said:
Hey All,
I have a super big problem >.<
I was trying to get clockworkmod recovery working on my phone and somehow it made me lose root access on CM6 and also I lost I lost my RA Recovery.
What do I do!?!?!
please help
PS: I still have S-On my phone
Click to expand...
Click to collapse
Follow the process to root again
Any Idea why that happened?
Do I need S-Off?
jvward said:
Any Idea why that happened?
Do I need S-Off?
Click to expand...
Click to collapse
i have no idea why that would happen ,, man im sorry , i only left it in cuz i know some people who use is ,
Hey Can I ask what does it offer outside what anons does?
jvward said:
Hey All,
I have a super big problem >.<
I was trying to get clockworkmod recovery working on my phone and somehow it made me lose root access on CM6 and also I lost I lost my RA Recovery.
What do I do!?!?!
please help
PS: I still have S-On my phone
Click to expand...
Click to collapse
I have doen this too, Clockworkmod replaces Amon's, just reflash amons and it will come back.
Thanks,
I got it working again, but just wondering how would I used this recovery manager if I wanted to ?
I dont think it was properly flashing its own recovery image.
Any advice would be appreciated.
Thanks!
jvward said:
Thanks,
I got it working again, but just wondering how would I used this recovery manager if I wanted to ?
I dont think it was properly flashing its own recovery image.
Any advice would be appreciated.
Thanks!
Click to expand...
Click to collapse
Don't use CLOCKWORK recovery unless you want a nice looking brick.
t2noob said:
Don't use CLOCKWORK recovery unless you want a nice looking brick.
Click to expand...
Click to collapse
Using Clockwork turns my phone into an Iphone 4?
Jking, does it bring anything to the plate that anons does not? and if so does anyone know if there is a way to manually flash the recovery image from them onto the phone, because if I use it, it just make my phone sit at the skate board screen?
jvward said:
Using Clockwork turns my phone into an Iphone 4?
Jking, does it bring anything to the plate that anons does not? and if so does anyone know if there is a way to manually flash the recovery image from them onto the phone, because if I use it, it just make my phone sit at the skate board screen?
Click to expand...
Click to collapse
It does have some pretty nice features, but it could cause a brick in the future.
I used it about a month before i had any problems with it.
I wasn't able to flash or restore any nands i had made, it would just spit out error after error. I even tried flashing the ROOT rom and that didn't help either. then when i tried rebooting it just never turned on again and I had to get the phone replaced. On other phones it works great, but on the eris its no good.
I would suggest stay with RA unless you're willing to risk your phone and money.
Cool,
I was just interested in the update rom feature for the Eris, but oh well if its that dangerous >.<
Thanks!
Quick question T2noob, I just noticed your post on the blog for clockwork recovery where you ever able to get past this error.
"The recovery for for the eris 1.8.1.1 isn't working, I tried to reboot into recovery but it never boots, it just stays at the android skateboard screen. If you need anything, testing, info on the phone, ect you can email me at XXXXXXXX"
Yea You need to flash RA then Clockwork thats how he had me fix it, but like i said don't use Clockwork recovery just take a look at this thread im not the only one
http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=687272
I find it really odd that so many people have trouble with clockwork. Been using it to flash ROMs for months with no issues. Hopefully don't have any in the future!
i've used clockwork mod for 3 weeks now without any problems. also have rom manager installed, same author. i absolutely love both apps. i came from a v3 leak and couldn't get amon recovery to load on my phone, this worked like a charm first time. also i read in the forums that amons recovery is no longer supported by the author unlike clockwork mod which the author updates frequently.
t2noob said:
Yea You need to flash RA then Clockwork thats how he had me fix it, but like i said don't use Clockwork recovery just take a look at this thread im not the only one
http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=687272
Click to expand...
Click to collapse
that thread you linked too only has you and the op posting in it. in fact i read that thread before i installed it and thought to myself that 2 people aren't enough to convince me it causes any more problems than amon's. personally i only used clockwork because that is what i could get loaded on my phone and have loved it since. also its been updated like 4 times since May when that link was started. so if it bricks my phone so what it just a phone and everythings backed up in triplicate anyways. be a nice excuse to get me a new toy.
I also believe the op's problem is that he used rom manager to flash amons recovery. now its my understanding that doing that removes clockwork mod recovery and replaces it with amon's. so he actually had a problem with amon's recovery and not clockwork mod recovery. i think the problems occur when people use rom manager to falsh a different recovery instead of clockwork mod which it is made to work with. just my ramblings here.
kzoodroid said:
that thread you linked too only has you and the op posting in it. in fact i read that thread before i installed it and thought to myself that 2 people aren't enough to convince me it causes any more problems than amon's. personally i only used clockwork because that is what i could get loaded on my phone and have loved it since. also its been updated like 4 times since May when that link was started. so if it bricks my phone so what it just a phone and everythings backed up in triplicate anyways. be a nice excuse to get me a new toy.
I also believe the op's problem is that he used rom manager to flash amons recovery. now its my understanding that doing that removes clockwork mod recovery and replaces it with amon's. so he actually had a problem with amon's recovery and not clockwork mod recovery. i think the problems occur when people use rom manager to falsh a different recovery instead of clockwork mod which it is made to work with. just my ramblings here.
Click to expand...
Click to collapse
take it as a grain of salt, if you come into the irc there are devs there that had this happen to them and can tell you what exactly happens. And I used ClockWork for about a month before i got the brick so...do as you like with this information.
well there are a lot of people running clockwork mod without problems. i went to the cyanogen forums looking for who was running cm6, like the op, and there are just as many people using clockwork as amon's. and there were a few reports of nandroid recovery failures using amon's in cm6 as the reason why they switched to clockwork.
kzoodroid said:
well there are a lot of people running clockwork mod without problems. i went to the cyanogen forums looking for who was running cm6, like the op, and there are just as many people using clockwork as amon's. and there were a few reports of nandroid recovery failures using amon's in cm6 as the reason why they switched to clockwork.
Click to expand...
Click to collapse
I heard that clock work is a great recovery on other devices, but on the eris it's not good the irc devs also worked with the guy who makes the recovery email him if you like he will tell you he had gotten complaints about on the eris. And there isn't an official cm6 for the eris so the people you talked to were running it for other devices. Like I said a grain of salt.
Sent from my Eris using XDA App
Well I would like to test it out but the recovery image it drops over anons does not seem to work anyone have any moderately detailed instructions on to how to get it to work?
Sent from my Eris using Tapatalk

Clockwork recovery

Flashed successfully with ROM manager, but i don't know how to get to it, when i boot into from ROM Manager it takes me to a screen with a picture of the phone with a red triangle...
You need perm root first. temp root will not work.
~k
kithros said:
You need perm root first. temp root will not work.
~k
Click to expand...
Click to collapse
I am perm rooted
ripgut said:
Flashed successfully with ROM manager, but i don't know how to get to it, when i boot into from ROM Manager it takes me to a screen with a picture of the phone with a red triangle...
Click to expand...
Click to collapse
I had this issue as well, I just reflashed clockwork and and used Rom manager to boot into recovery. That seemed to fix the issue for me.
S-OFF
make sure you are S-OFF, i was having the same problem
speoples20 said:
I had this issue as well, I just reflashed clockwork and and used Rom manager to boot into recovery. That seemed to fix the issue for me.
Click to expand...
Click to collapse
That worked.
speoples20 said:
I had this issue as well, I just reflashed clockwork and and used Rom manager to boot into recovery. That seemed to fix the issue for me.
Click to expand...
Click to collapse
I'm S=OFF and that didn't work.
for anyone having problems accessing the recovery after flashing Clockwork Mod, pull the battery and put it back again. Then try accessing the recovery. Worked for me.
Ok stupid question ( haven't tried yet) but do i access the recovery manual via ROM manager or can i hold down the HOME button when i restart?
Please post questions in Q&A section.
d0cx said:
for anyone having problems accessing the recovery after flashing Clockwork Mod, pull the battery and put it back again. Then try accessing the recovery. Worked for me.
Click to expand...
Click to collapse
That one worked. Thanks!

[Q] OK so i know my GF's phone isnt bricked but...

Hey MT4G guru's i need your assistance.
1st off im an Evo user..rooted and all so im not to shabby at doing this. 2nd I rooted her phone using visionary.
So on to the problem. I tried to flash her a theme. I nandrioded (backup) first as usual. The theme which ended up being a full ROM--> http://forum.xda-developers.com/showthread.php?t=929101
It flashed successfully but when i rebooted it gets stuck at the white MT4G screen and stays there forever.
**I can still get into the bootloader & recovery.**
Tried to restore...NO LUCK. It restores, I reboot then the Same white screen.
Tried to factory reset, dalvik & cache wipe..... NO LUCK
Tried Update.zip Nothing!!!
Even tried pd15img in the bootloader. NOTHING!! It doesnt even recognize it!!
Guys i even looked into odin which i found out it isnt needed on phones with recovery.
Hate to sound like a noob but Help!!!!
...A fixed phone will result in 30,000 "thanks" button presses.....cause shes pissed to say the least....
Edit: Ok i believe i found the problem. I had clockwork 2.5.1.2 instead of 3 on her phone. Ok so now that i found the problem how do i fix it??
go to this link http://goo.gl/K0xTy and follow the instructions. you are flashing a cm7 rom and for this phone requires a different recovery. Then flash your rom
Flash cm6 first it will boot with 2.5
twiztid
If you made a nandroid backup, which you always should do before flashing a new rom, you can restore it using clockwork 2.5.1.2. If you don't have a backup you can do two things. You can use fastboot to flash clockwork recovery v3.0.0.5 to the phone then reboot into recovery and successfully flash CM7. If you don't know how to use fastboot then you can use the existing recovery to flash a froyo based rom on the phone. Either iced glacier or CM6 will flash ok. Perform a full wipe before you flash. Once you have a froyo rom working you can follow TrueBlue_Drew's thread about getting clockwork 3 on the phone without issue. I'm on my phone so I can't provide the link but it is in the mt4g development section. It is in a sticky called Resource Bible. In the OP, scroll until you see the header Recoveries and choose the link called Easiest way to install clockwork 3.0.0.5 by TrueBlue_Drew. Follow his instructions and you'll be able to switch between clockwork versions with no hassle. Of course, once you have clockwork 3 working you can flash CM7.
EDIT: Drew replied before I finished writing so follow his link once you are able to boot successfully.
Phillysphinest1 said:
Hey MT4G guru's i need your assistance.
1st off im an Evo user..rooted and all so im not to shabby at doing this. 2nd I rooted her phone using visionary.
So on to the problem. I tried to flash her a theme. I nandrioded (backup) first as usual. The theme which ended up being a full ROM--> http://forum.xda-developers.com/showthread.php?t=929101
It flashed successfully but when i rebooted it gets stuck at the white MT4G screen and stays there forever.
**I can still get into the bootloader & recovery.**
Tried to restore...NO LUCK. It restores, I reboot then the Same white screen.
Tried to factory reset, dalvik & cache wipe..... NO LUCK
Tried Update.zip Nothing!!!
Even tried pd15img in the bootloader. NOTHING!! It doesnt even recognize it!!
Guys i even looked into odin which i found out it isnt needed on phones with recovery.
Hate to sound like a noob but Help!!!!
...A fixed phone will result in 30,000 "thanks" button presses.....cause shes pissed to say the least....
Edit: Ok i believe i found the problem. I had clockwork 2.5.1.2 instead of 3 on her phone. Ok so now that i found the problem how do i fix it??
Click to expand...
Click to collapse
Swyped on my rooted MyTouch4G
XfooYen said:
If you made a nandroid backup, which you always should do before flashing a new rom, you can restore it using clockwork 2.5.1.2. If you don't have a backup you can do two things. You can use fastboot to flash clockwork recovery v3.0.0.5 to the phone then reboot into recovery and successfully flash CM7. If you don't know how to use fastboot then you can use the existing recovery to flash a froyo based rom on the phone. Either iced glacier or CM6 will flash ok. Perform a full wipe before you flash. Once you have a froyo rom working you can follow TrueBlue_Drew's thread about getting clockwork 3 on the phone without issue. I'm on my phone so I can't provide the link but it is in the mt4g development section. It is in a sticky called Resource Bible. In the OP, scroll until you see the header Recoveries and choose the link called Easiest way to install clockwork 3.0.0.5 by TrueBlue_Drew. Follow his instructions and you'll be able to switch between clockwork versions with no hassle. Of course, once you have clockwork 3 working you can flash CM7.
EDIT: Drew replied before I finished writing so follow his link once you are able to boot successfully.
Swyped on my rooted MyTouch4G
Click to expand...
Click to collapse
Dooohhh!!! Thanks for cleaning this up for me. I forgot to tell him he needed to DL and install a 2.2 rom using his current recovery if he cant restore the nandroid. on a side note....I'm typing this from my laptop that is using my wifi hotspot from my friends truck somewhere (middle of nowhere) in Colorado in a snow storm. got to love technology. I am also downloading the latest nightly. Only 28 minutes left on this slow edge connection, but at least its working
TrueBlue_Drew said:
Dooohhh!!! Thanks for cleaning this up for me. I forgot to tell him he needed to DL and install a 2.2 rom using his current recovery if he cant restore the nandroid. on a side note....I'm typing this from my laptop that is using my wifi hotspot from my friends truck somewhere (middle of nowhere) in Colorado in a snow storm. got to love technology. I am also downloading the latest nightly. Only 28 minutes left on this slow edge connection, but at least its working
Click to expand...
Click to collapse
Stay warm..
Swyped on my rooted MyTouch4G
TrueBlue_Drew said:
go to this link http://goo.gl/K0xTy and follow the instructions. you are flashing a cm7 rom and for this phone requires a different recovery. Then flash your rom
Click to expand...
Click to collapse
twiztidmyt4g said:
Flash cm6 first it will boot with 2.5
twiztid
Click to expand...
Click to collapse
UPDATE:
Ok.........(drum roll please)..........and the winner to the simplest answer that i should of thought of myself but i didnt cause i paniced is.....
TrueBlue Drew & Twiztidmy4g
All I needed to do was full wipe & flash a compatible ROM & it booted up fine!!!
**Attention XDA**
National crisis averted!!!! Woman is now satisfied. We nearly missed a nucular meltdown!! Thanks guys!!!!!
MODS PLEASE CLOSE OR COMPLETELY BURN & DELETE THIS WORTHLESS THREAD!!!!!
CM6 download
New to mt4g and have the same problem, i know i cant got o rom manager because i cant boot, can you provide a link to a cm6.zip file that i can run using clockwork 2.5.1.2
Thanks and yes i searched ont he forums for mt4g and i only see cm7 ....
"You can use fastboot to flash clockwork recovery v3.0.0.5 to the phone then reboot into recovery and successfully flash CM7. "
So how do you use fastboot to flash clockwork ? need help here i have clockwork on the sd card and installed using recovery but when i power volume down i am still in clockwork 2.5.1.2
How do i change clockwork to 3.0.0.5 from fastboot ?
Found it.... http://forum.xda-developers.com/showthread.php?t=876632
Installed it and then updated clockwork now in CM& ... wow Thanks .... ?
cmboud said:
So how do you use fastboot to flash clockwork ? need help here ......
Found it.... http://forum.xda-developers.com/showthread.php?t=876632
Installed it and then updated clockwork now in CM& ... wow Thanks .... ?
Click to expand...
Click to collapse
Didn't even have to reply. The search button is a marvelous thing. Good lad!
Swyped on my rooted MyTouch4G

MOD PLEASE DELETE Thread is of No use

I Think i have bricked my nexus s ......it wont startup and goes to do first setup but force closes....i can access recovery but when i flash a rom it aborts ....only just bought it
U can odin it back to stock. Check out the android dev forums
Sent from my Nexus S using XDA App
afishpie said:
U can odin it back to stock. Check out the android dev forums
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Please can you elaborate...or point me in right direction......recovery is now only accessible by flashing it first....phone just wont do anything
download a 2.3.3 nandroid backup and restore to it using clockwork recovery
ignore odin.
http://forum.xda-developers.com/showthread.php?t=884093
update to 2.3.3 using http://android.clients.google.com/p...2cf141e6a.signed-soju-ota-102588.f182cf14.zip
or just download CM7 and flash that along with gapps (wipe dalvik/cache/factory)
and your phone is not bricked. the definition of a bricked phone is a phone who cannot access recovery/fastboot/etc.. can access absolutely nothing
Well, he does say that his attempts to flash a rom always abort...
OP, we need more details.
Are you using Clockwork Recovery? Which version? Try an older/newer version...
What ROM are you trying to flash? Have you tried others?
What happens when you try a normal boot? You say you get as far as the first setup screen?
Have you tried a Factory Reset of the phone from within recovery (stock or clockwork)?
distortedloop said:
Well, he does say that his attempts to flash a rom always abort...
OP, we need more details.
Are you using Clockwork Recovery? Which version? Try an older/newer version...
What ROM are you trying to flash? Have you tried others?
What happens when you try a normal boot? You say you get as far as the first setup screen?
Have you tried a Factory Reset of the phone from within recovery (stock or clockwork)?
Click to expand...
Click to collapse
Many thanks to both of you.....for your help .....so much appreciated......i have got past first setup screen after applying a nandroid backup......it finally worked after 5 times trying....but i have stock android recovery but rom manager on phone .....how can i get clockwork mod back as everytime i flash it.....i get to use it for that one instance ans then it returns to stock android recovery
I think it might be okay now ....after titanium said busybox was installed....i dont think it was done correectly.....after downloading busy box from market....recovery seems to be sticking rather then reverting back to android. Just to check....is there anything i should do to check all is well on my phone and also while flashing i think i changed build number from IR to GH (what are the implications of this move? many thanks...phew
EDIT- NO recovery still wont stay....any ideas?
menov321 said:
I think it might be okay now ....after titanium said busybox was installed....i dont think it was done correectly.....after downloading busy box from market....recovery seems to be sticking rather then reverting back to android. Just to check....is there anything i should do to check all is well on my phone and also while flashing i think i changed build number from IR to GH (what are the implications of this move? many thanks...phew
EDIT- NO recovery still wont stay....any ideas?
Click to expand...
Click to collapse
That's normal. See below:
It's normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you'll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you'll need to rename /etc/install-recovery.sh to something thing else
sano614 said:
That's normal. See below:
It's normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you'll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you'll need to rename /etc/install-recovery.sh to something thing else
Click to expand...
Click to collapse
Thankyou SOOO MUCH.....you put my mind at rest......can you maybe help me with one other thing.....WHEN I MESSED UP EARLIER i flashed a different rom build.....does this have any negative affect on the phone....my stock rom was a IR something but i flashed a GR or GH something....
menov321 said:
Thankyou SOOO MUCH.....you put my mind at rest......can you maybe help me with one other thing.....WHEN I MESSED UP EARLIER i flashed a different rom build.....does this have any negative affect on the phone....my stock rom was a IR something but i flashed a GR or GH something....
Click to expand...
Click to collapse
No it doesn't. You're fine. The latest is android 2.3.3 with GRI40.
Sent from my Nexus S using Tapatalk

[Q] mytouch 4g glacier big problems

okay well a couple months ago I permarooted my phone and flashed a custom rom but I can't remember which one I used all I can say is that I cannot do anything no more with my phone in a way because I keep trying to turn s-on but superuser is not letting me because it's basically broken. I try to open up superuser to see whats wrong but it just shows me a white screen. so I find an update for superuser but I don't know how to install it anyway but the clockwork recovery mode way. So I try to reboot into clockwork recovery but my phone just gets stuck in the mytouch 4g screen and never boots into recovery, so I am forced to take out the batttery and put it back in. I need an answer by today hopefully
zdrzero said:
okay well a couple months ago I permarooted my phone and flashed a custom rom but I can't remember which one I used all I can say is that I cannot do anything no more with my phone in a way because I keep trying to turn s-on but superuser is not letting me because it's basically broken. I try to open up superuser to see whats wrong but it just shows me a white screen. so I find an update for superuser but I don't know how to install it anyway but the clockwork recovery mode way. So I try to reboot into clockwork recovery but my phone just gets stuck in the mytouch 4g screen and never boots into recovery, so I am forced to take out the batttery and put it back in. I need an answer by today hopefully
Click to expand...
Click to collapse
I think you update superuser in the market. Try flashing clockworkmod recovery from the ROM Manager app, then boot into recovery (if you need to) and see if it works. If not, I have no clue what your problem is. Sorry, hope I helped. Press thanks if I did
Forgot to mention that when I try to flash recovery or anything because super user is not working I can't install clockrecovery or go Into it with bootloader because it just freezes at touch 4g screen
zdrzero said:
Forgot to mention that when I try to flash recovery or anything because super user is not working I can't install clockrecovery or go Into it with bootloader because it just freezes at touch 4g screen
Click to expand...
Click to collapse
OK. Are you sure you are rooted/S-OFF? Boot into bootloader by holding power + volume down to see if you have S-OFF.
Yup it still is permarooted
zdrzero said:
Yup it still is permarooted
Click to expand...
Click to collapse
Hmmm.....try rooting with ./gfree, it worked for me. I am not sure what your problem is if it doesn't work.
I think the solution is to update super user but I can't update super user unless I'm in the clockwork recovery mode and stuff which I can't get into unless there is another way to update super user because when I open super user it just gives me a blank white screen
zdrzero said:
I think the solution is to update super user but I can't update super user unless I'm in the clockwork recovery mode and stuff which I can't get into unless there is another way to update super user
Click to expand...
Click to collapse
Super user is an app. Go to the market.
Sent from my HoneySmartDroid Port using XDA Premium.
okay so I was able to get superuser updated but now when I try to update the su binary it keeps saying fail when trying to gain root access
sorry for double post but I need this done by today because I sold it rooted and now I am trying to do s-on, unpermaroot, then unroot
oh btw my superuser binary is not updating it keeps saying gaining root access fail
EDIT:Turns out all I had to do was read a guide that was posted about my by an admin or mod so it's fixed now

Categories

Resources