[Q] Help!! AutoHardReset on T3232 - Touch 3G General

Hi all, I have a t3232 clone, with this problem: After reboot it, or soft reset, or turn it on, it does as if as a hard reset it. I flash it with more than one ROM, in more than one SD card, in more than one computer, and always occur the same thing. Hard reset, every time I reboot it, soft reset it, or turn it on.
Anybody knew about this error???
Thanks for the help. Sorry for my english, I from Argentina.
Update: I flashing rom with sd card update mode and with usb update mode, many differents ROMs ( 6.1, 6.5, different languages, cooked and originals ). Every worked fine in any case, until I reeboot, turnoff-on, or soft-reset....... in this case, it boot as if as hard reset occur.......

disasembly the cell, and check for water into the flex cables and buttons, some times the buttons are in shock and occure that the phone make this kind of extrange facts.

Related

Qtek 9100 won't start.

Hello, i've recently bought an used qtek 9100 Phone, with SNE on it.
The phone worked great until i did run a program that were installed on the phone, after i started the program the phone screen went white, and i had to remove the battery. When i turned on the phone agian, the SNE screen appeared and the phone seemed to start normally; though when it went to the: Touch! No Evil text, it wouldn't go any futher and it still won't
Is there any way to format the phone? or what can i do?
I've already tried both of the reset things without success.
Thanks
If both Soft Reset and Hard Reset doesn't work,the only other alternative is to reflash a fresh rom,cuz some program files have corrupted the 'Extended Rom' probably.
Cheers!

Screwed my elf! Please help!

Hi guys.
I recently installed Onyx Micro on my Elf, and it's been great. I needed a "Home" panel though, so I installed a Home application that I had on my memory card, and after that reset, my phone's been unusable. When i turn it on, it either hangs, or gives me an error that says something to the effect of "phonesyslog has malfunctioned", and then freezes.
I can't get it connected with Actiesync, I can't hard-reset it either. Any idea what I can do?
Can anyone help me?
Hi,
Did you try removing the memory card? In case that doesn't help, try pressing the camera button while starting up, this should enter the bootloader mode, which enables you to flash a new rom. Do this in Windows XP, as Vista can cause problems. If you've never flashed a rom, try searching this forum for an appropriate rom and a how-to-guide.
Regards,
murosama
Hard reset should work and should be all you need to solve your problem. Make sure that you are performing the hard reset correctly.
For a hard-reset without access to the systems menu do the following:
Make sure the device is switched off, then press both the green and the red phone button and while keeping them pressed switch on the device.
A menu should appear, asking you to confirm the hard-reset.
(Upon confirmation, all data will be erased and the out-of-box state will be restored.)
In case that doesn't work, try flashing a rom that is native to your device
(as suggested above).
Good luck,
murosama
I got the same problem i tryed all off this but didn`t work did you find a sollution for yours?

Titan keeps soft resetting on its own!!!!! plz HELP

My titan keeps soft resetting on is own, it'll boot up to the splash screen the all of a sudden soft reset by itself. can anybody out there help?
DO a hard reset. Did you just install a custom rom or radio?
I did a hard reset, and its a custom ROM but i've had it for months. This just started today
I say reflash everything
just did, still same issue, i even did a new ROM. the phone didnt soft reset at all while i had it in bootloader mode
Then I say a hardware failure and time for a replacement
Any idea on what might be causing it?
A hardware failure. Some chip on the pc board is going bad.
Thanks man.
I had flashed a ROM on my wife's Mogul awhile back and it has just started doing the SAME thing... random soft resets... so before blaming hardware there might be a reason why multiple people are having this issue....
Have any of you tried this out yet.
http://forum.ppcgeeks.com/showpost.php?p=549004&postcount=2

[Q]

Hi everyone,
I've unplugged my HTC Touch HD (Blackstone) while it was synchronizing with windows 7 and stock on synch. with no actual progress, then I removed the battery but only the "smart mobility" and RGD displayed and then nothing happened "black screen".
Do any one knows what happened and to fix it back to normal?
Thanks,
Suficom,
I think that the register and/or the system files and/or the ROM's software of your phone were damaged somehow with a little or high intensity that I'm unable to especify now.
If you did'nt get it fixed yet, try to remove SIM and SD cards and then restart the BlackStone (it worked to me once...lol). If negative, try a Hard Reset on that. If it don't work too, I'd advise you to put a new ROM on your HTC; but be aware that doing this two last procedures, you will loose all out of the information of yours that isn't placed on the SD card.
Tell us your progress!
Good Luck!
Stay in peace!
If it was just synchronizing you can just do a hard reset (hold vol down + power). This will reset your phone to factory conditions.
If you were flashing a rom which failed, you should download a rom and flash it to your phone. You can download the stock rom from the HTC site.

Herald won't turn on

Hello,
first of all: sorry for my bad English, I will try to make you understand it.
I have a problem with my Herald. I hardspled it and put a rom on it. It worked really well, but I wanted it to be in my own language so i downloaded another ROM. During the installation of that ROM (I did it with ROMUpdateUtility), the phone fell off the PC and the cable pulled out. The phone was stuck in bootmenu and later went out.
Now I can't get it on anymore. I can't charge it (well, maybe it's charging, but there are no lights at all), I can't turn it on, I can't connect it to the PC ( the PC doesn't reccognize it) and I can't get into Bootmenu.
I tried a soft reset and a hard reset, but nothing happens. Is there a solution or do I have to buy a new phone?
Thank you!

Categories

Resources