Database Users

Help needed.. Phones stuck on HTC start up screen

Hi guyz,
I flashed the Leon ROM in the morning. After the flash the phone was stuck on the HTC logo. After a soft reset it loaded up and everything worked perfectly. I really liked the LEON ROM so I kept it and started syncing all the stuff from my PC.. I was playing with it a few hours.
I added some albums to my SD card and was updating the music player when it crashed and reset itself.
I can't get past the HTC screen again. I tried everything, soft reset, with and without the SD card, without SIM, taking out the battery but it's stuck.
Can you guyz tell me what it is or of any of u had the same and how u sorted it out?
If nothing helps what can I do? Can I still flash the official ROM or should I re-flash LEON?
Hope it can be sorted without exchanging it or repair.
Thanks very much
Suz
----------------------
SPL 1.42 HardSPL by bepe and Cotulla
OS Version: 5.2.21889 (21889.0.5.87)
Manila Version: 2.5.20121412.1
ROM Version: LEON v1.4 WWE
ROM Date: 02/19/10
Radio Version: 2.05.51.05_2
Protocol Version: 15.28.50.07U

DId you hard reset after the flash finished? Have you flashed a few roms? Have you task 29/mtty'd?
What radio?

samsamuel said:
DId you hard reset after the flash finished? Have you flashed a few roms? Have you task 29/mtty'd?
What radio?
Click to expand...
Click to collapse
1. Yes
2. No (just 2)
3. I am on in rite now.

Can I just flash a new ROM over it? Should work rite?

Yep, sure, boot to bootloader, wait for 'serial' to become 'usb' and run customruu.exe to flash.

Thanks very much for your help..
xxx

I am a HD2 owner for two days now. I used to flash much with my HD1, so I couldn't resist any more and started flashing two hours ago.
Same thing happend to me after flashing and a soft reset. Only the white HTC screen came up (at first I sh*t my pants, I was afraid I bricked it for real ). I tried several things..
Everytime when I reflashed the device it was working again, until I did a soft reset, after that evertime I was greeted with the white HTC screen.
After searching for a while on XDA I found somebody stating that the RADIO could be the problem. I never had booting problmens with differrent radio's with my HD1. But for the HD2 this is different I assume.
My solution was:
- Go to: http://forum.xda-developers.com/showthread.php?t=611787
- download radio: Leo_RADIO_15.34.50.07U_2.08.50.08
- Place the radio (make sure the name of the radio is RUU_signed.nbh) in the same dir as LeoCustomRUU.exe (download here: http://forum.xda-developers.com/showpost.php?p=4798017&postcount=1 )
- turn off HD2
- press and hold volume down button and press power on
- when the tricolor screen appears, plug in the USB cable and wait for the screen to say 'USB'
- Run LeoCustomRUU.exe and follow on screen instructions
- Wait for the process to complete
With this new radio my device started booting again Let me know if this fixed your problem!

wtfbbq said:
I am a HD2 owner for two days now. I used to flash much with my HD1, so I couldn't resist any more and started flashing two hours ago.
Same thing happend to me after flashing and a soft reset. Only the white HTC screen came up (at first I sh*t my pants, I was afraid I bricked it for real ). I tried several things..
Everytime when I reflashed the device it was working again, until I did a soft reset, after that evertime I was greeted with the white HTC screen.
After searching for a while on XDA I found somebody stating that the RADIO could be the problem. I never had booting problmens with differrent radio's with my HD1. But for the HD2 this is different I assume.
My solution was:
- Go to:
- download radio: Leo_RADIO_15.34.50.07U_2.08.50.08
- Place the radio (make sure the name of the radio is RUU_signed.nbh) in the same dir as LeoCustomRUU.exe
- turn off HD2
- press and hold volume down button and press power on
- when the tricolor screen appears, plug in the USB cable and wait for the screen to say 'USB'
- Run LeoCustomRUU.exe and follow on screen instructions
- Wait for the process to complete
With this new radio my device started booting again Let me know if this fixed your problem!
Click to expand...
Click to collapse
Damn it! I wish I read this sooner.. I tried to flash the updated version of LEON 1.5 but nothing changed.. Now I'm flashing the original ROM 1.48.
I will run task 29 afterwards and try LEON 1.5 again. If it ain't working after that I will try the radio thingy .. Have to look up the radio stuff coz I'm still confused.. ehm..
Thanks so much for your help.. I appreciate it..

I ran the TASK 29 Radio 2.08.50.05. After that I re-flashed LEON v1.5 and it works. I tried to soft reset just to make sure and it loaded up.
So happy. Thanks very much for your help.
--------------------------
OS Version: 5.2.21889 (21889.0.5.87)
Manila Version: 2.5.20121412.1
ROM Version: LEON v1.5 WWE
ROM Date: 25/03/10
Radio Version: 2.08.50.05

SinFire said:
I ran the TASK 29 Radio 2.08.50.05. After that I re-flashed LEON v1.5 and it works. I tried to soft reset just to make sure and it loaded up.
So happy. Thanks very much for your help.
--------------------------
OS Version: 5.2.21889 (21889.0.5.87)
Manila Version: 2.5.20121412.1
ROM Version: LEON v1.5 WWE
ROM Date: 25/03/10
Radio Version: 2.08.50.05
Click to expand...
Click to collapse
i dont mean to sound pedantic but it LEO

djchubbs said:
i dont mean to sound pedantic but it LEO
Click to expand...
Click to collapse
nah.. it doesn't sound pedantic.. LOL.. LEON as in the ROM LEON.. not the phone... heh

wtfbbq said:
....(make sure the name of the radio is RUU_signed.nbh) in the same dir as LeoCustomRUU.exe
Click to expand...
Click to collapse
The name is so of no importance! i can even call fu**er.nbh if i want to, Custom_RUU will still update it. As long as both files are in the same folder nothing else matters. If you don't believe me, then just go ahead and try it yourself

Help :(

Hey, i tried a couple of android roms but when i press haret i either get a black screen which in it is written jumpin to kernel with small white fonts or the screen fades away :/ .... can any 1 help me out here? am i doing anything wrong?

any1?!!!!!!!!!!!!!!!!

I would say try reformatting your sd card and try again.
For me, I had no desire to run WinMo except as a means to booting Android. So, I put HSPL3 on and radio 2.11 and a barebones WinMo ROM made for booting into Android. I then flashed Hyperdroid 1.5 and I have almost no problems.
Remember to run Clrcad before Haret to ensure soundy goodness.

kill3r115 said:
Hey, i tried a couple of android roms but when i press haret i either get a black screen which in it is written jumpin to kernel with small white fonts or the screen fades away :/ .... can any 1 help me out here? am i doing anything wrong?
Click to expand...
Click to collapse
lol, the black screen with white writing is normal, its rebboting into linux.
If it fades away and doesnt load into anroid then I thin that down to your radio version as I had same prob when I first got my hd2, You need to update your radio to at leats 2.10 I think. Im on 2.12 now.

yeah, it's a radio-related problem
anything with 2.10.50.08_2 in it will work even 2.07.50.08_2 will work, but its not recommended
but with 51 will NOT work

Yes change your radio to 2.10.50 at least. By doing this, you will void your warranty.

stuck after installing MAGLDR while installing NAND

oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?

Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
Did you try reading the flashing instructions. Refer to the Flashing NAND Android rom link in my signature. The problem is that you probably have the wrong radio. Also please don't start new threads to ask questions when threads already exist. This thread will soon be moved.

Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
remove battery
enter HSPL via bootloader (have you got HSPL 2.08)??
(long press volume down + briefly press power button)
btw wrong post here mate

Moved to HD2 Android Q&A and General

I got the same problem with SPL 2.08.HSPL, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!

sanroman said:
I got the same problem with HSPL 2.08, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!
Click to expand...
Click to collapse
Are you sure your spl version is 2.08.hspl and NOT 2.08.0000?

Completly!. SPL-2.08.HSPL as stated on tricolor screen. Thanks for the response.

And you also sure of the radio version? Really strange that it doesn't work. Where exactly does it get stuck, is it after or during the install of magldr?

Absolutely sure. All info is the one shown in the device. MAGDLR installs perfectly at 100%, it stucks at reboot, it shows the white htc screen and that's all, the device doen't work any more and I've to reinstall oficial rom.

Really weird - first one I've seen where 2.08.hspl and 2.15.50 radio doesn't get magldr to boot. Not sure what else to suggest apart from perhaps doing a Task29 to format the NAND area and starting all over.

I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.

There are the Android versions that run off sd card which run as a dual boot with winmo.

sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
Check your radio version - I had the same issue but after updating my radio everything was fine!

sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
well, maybe its kinda "stupid" question, but do you press the power (red) button while booting? I mean, you have to press it long enough, till the magldr menu comes up..

Believe me that i've tested that way, and another ones, so as to get it work, but no luck.

I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .

mikelt89 said:
I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .
Click to expand...
Click to collapse
Format the sd card. I would also suggest flashing back to a winmo rom and then starting over.

chpelle said:
Check your radio version - I had the same issue but after updating my radio everything was fine!
Click to expand...
Click to collapse
Rerereinstalled and no luck. Why me?

I have the same problem. I have checked the radio and everything to make sure it is fine but still getting stuck at htc screen??
Can someone help me please
Thanks

cwm recovery
flashed cwm recovery update for hd2 no my phone wont charge nor register when plugged into the computer. is there a way to fix this

[Q] Stuck on HTC logo screen. Argh!!!

Flashed ROM Froyo 2.2 (on MicroSD). Ran HaRet.exe and runs for about 2 seconds and then switches to HTC logo screen. I've tried it again and again and still have the same results. SPL 2.08. Am I doing something wrong? Do I need to update the hardspl to a different version?
Ps...please don't get angry if this is the wrong forum. I searched and could not find a solution.

You need to flash a compatible radio first, one with .50 in it, check the winmo section for more info

Flashed LEO 2.12.50.2. Same results-stuck on logo screen.

DAmmit! I can get to the bootlog screen but phone itself wont' boot up.

[Q] Phone stuck on HTC boot logo

Hello, i have installed a SD version of android on my HTC HD2 it started normally but after i rebooted i got stuck on the winmo Bott screen(Htc in green with white background)
Ps : i have acess to the HSPL boot loader but i haven't tried anything(afraid that i brick my phone )
I am a complete noob and any help will be appreciated.

midoBB said:
Hello, i have installed a SD version of android on my HTC HD2 it started normally but after i rebooted i got stuck on the winmo Bott screen(Htc in green with white background)
Ps : i have acess to the HSPL boot loader but i haven't tried anything(afraid that i brick my phone )
I am a complete noob and any help will be appreciated.
Click to expand...
Click to collapse
SD Android has no effect on Windows, so I can't imagine how Winmo has frozen? It would probably be of benefit to people more experienced than myself who could explain this to be more detailed.

the sd card wont effect on the windows attttt allll ... but if you stuck ... just flash the stock rom since you have access to the boot loader... plus i would say go to android on nand so much better than sd

since microsoft stopped supporting the wm6.5

I know it isn't supposed to have effects on my winmo it did (stuck on the boot screen without showing the radio and the numbers below the screen)
And how i can flash the stock winmo or the nand android and which is better?
thx in advance

okay man go into the boot loader and flash the stock rom wm6.5 ... you can download it from the forums here or from htc website ... then flash the magldr and flash the recovery, then download any android nand rom you want and install it using your phone .... pick any rom you want from the nand android and ill give you the instruction for it step by step and please let me know , the type of your phone is it t-mobile or normal hd2

I have an orange disimllocked phone (normal HD2 not t-mos)
i must download the orange rom or the unbranded rom??

midoBB said:
I have an orange disimllocked phone (normal HD2 not t-mos)
i must download the orange rom or the unbranded rom??
Click to expand...
Click to collapse
Go to the unbranded ROM and type in you Serial number. It should provide you with the ROM which you need; for example when I tried my serial number it came up with Rom 3.14 for O2.

yea do it like Nigeldg said and report back to us