Database Users

Spl 1.42.0000

Where do i find it?
Searched for a long time

Why do you need it?
You can't get it on it's own, you need to flash a stock ROM using the SD card method to get the stock SPL on. If you turn off your phone, hold down the vol down button and turn it on you go into the bootloader - what SPL version is listed in there?
(to get out of the bootloader, take the battery out for 5 seconds and put it back in)

my spl: 1.66.0000
i have updated my hd2 rom once (original update).

You'll need to get a 1.48 ROM and flash back to that using the sd card method to get back to SPL 1.42. Then you can put HSPL on the phone and upgrade again using the activesync method and you'll be ok.
You can get the 1.48 ROM here, just put in your serial number:
http://www.htc.com/nl/SupportDownload.aspx?p_id=297&cat=2&dl_id=804
Then follow these notes:
Flashing Via MicroSD Card
NOTE (PLEASE READ): If you flash a Stock Rom via microSD Card then it will overwrite your HardSPL with a stock SPL included in the nbh file. Therefore if you flash a v2.01 or later Rom (with SPL2.*) you will NOT be able to reinstall HardSPL onto your device and could end up bricking it. This does not apply to custom roms as they do not include an SPL. BE CAREFUL!!
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.

Wiki and Sticky....
Hey There,
Look to the WIKI and STICKY
All you need is there.... yeah with a real video for beginners...
Grtz,
PS MOD close this....

thnx i know how to get it done now!

Thank you EddyOS, i will also try this since i get "invalid vendor ID" when doing it via USB cable. Hope it works
EDIT: Dang, didnt work "Loading ... Not Allow" + back to bootloader

Help
Hi,
I need to find SPL 1.42.0000 for my leo, swedish.
The link in the previous post didnt work for my SerialNo =(

you can't get just the SPL - you need to flash the stock ROM for your region.
and the link wouldn't work as it was the Dutch HTC site - try here:
http://www.htc.com/se/supportdownloadlist.aspx?p_id=297&act=sd&cat=all

Taken from my Rom Flashing guide:
2. FLASH HARDSPL2 (REQUIRED!! DO THIS BEFORE ANYTHING ELSE)
The Original HardSPL Thread is *HERE*
IMPORTANT: To install/uninstall this HSPL there must be any SPL version from this list on your device:
SPL 1.42.0000, SPL 1.42.HSPL, SPL 1.62.0000, SPL 1.66.0000, SPL 1.66.HSPL,
SPL 2.07.0000, SPL 2.08.0000 SPL, 2.08.HSPL
NOTE: If you have Vista or Windows 7, update WMDC to v6.1 *HERE* first
NOTE: Turn OFF any AntiVirus Program first as it WILL interefere with the flash (there is NO harmful code in the program)
Flashing via ActiveSync with USB Lead (thanks to Bepe)
1. Download HardSPL package from *HERE* and extract to an empty folder
2. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
3. Run HSPL2_RUN.exe from your pc and read all the text carefully
4. When finished click next in the HardSPL program
5. The program will now check the usb connection and enter the bootloader screen (tri colour)
6. NEW: YOU CAN NOW CHOOSE WHICH VERSION OF SPL OR HARDSPL YOU WANT TO FLASH TO YOUR PHONE!!
7. Select your desired HardSPL and click NEXT.
8. HardSPL will now be flashed to your phone.
5. When its finished the HardSPL program will pop up a box saying "successfully Done".
6. Click ok to terminate program and reboot the phone.
7. Congrats, you just flashed HardSPL.

EddyOS said:
you can't get just the SPL - you need to flash the stock ROM for your region.
and the link wouldn't work as it was the Dutch HTC site - try here:
http://www.htc.com/se/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
Click to expand...
Click to collapse
You can flash just the SPL now
Mark.

Spl 1.42.0000000000
Could someone Just send us the link to where this stupid SPL 1.42.00000 that everyone needs for it to work is? We can't find it anywhere????
Where is it?
We not how to load it we need the file!!!!

[email protected] said:
Could someone Just send us the link to where this stupid SPL 1.42.00000 that everyone needs for it to work is? We can't find it anywhere????
Where is it?
We not how to load it we need the file!!!!
Click to expand...
Click to collapse
you are showing your ignorance by getting all demanding, if you had read anything, you would know that spl is part of all official roms.it is not a file in its own right.
the only reason you would be looking for it is if you have a telstra, cos hspl2 works on any spl. in which case you need the 1.49 telstra rom, flash it from sd card and it will downgrade your spl to 1.42
if you don't have a telstra, then you are looking for something you don't need.

i cannot seem to flash my phone! D: it's irritating me greatly...
allow me to tap out my phone for you.
rgb screen:
PB81120 SS-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
i can't flash roms till it's hspl-ed.
hspl2 says i have a bad model number?
i have the US TMO HD2, 512 rom, not 1gb rom.
pretty sure it's only 512, cause with OS running, i check about system, it says i have 4hundred and something avail.
i've tried everything.
i can't even locate a copy of 1.66 rom so i can install 1.42 spl, cause htc says my model number isn't suitable for the rom i try to download.
basically, i'm F%$KED. and i need helps.
please, respond! i just wanna hack this POS winmo 6.5 shiz to something cooler.. D:

ijoshv2 said:
i cannot seem to flash my phone! D: it's irritating me greatly...
allow me to tap out my phone for you.
rgb screen:
PB81120 SS-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
i can't flash roms till it's hspl-ed.
hspl2 says i have a bad model number?
i have the US TMO HD2, 512 rom, not 1gb rom.
pretty sure it's only 512, cause with OS running, i check about system, it says i have 4hundred and something avail.
i've tried everything.
i can't even locate a copy of 1.66 rom so i can install 1.42 spl, cause htc says my model number isn't suitable for the rom i try to download.
basically, i'm F%$KED. and i need helps.
please, respond! i just wanna hack this POS winmo 6.5 shiz to something cooler.. D:
Click to expand...
Click to collapse
Maybe this posting here will help you to get answers to your questions...

htc hd 2
is not working for mi my freind , it just get the color on the phone and them the program say error , can you help me my SPL-2.08.0000

walasquin55 said:
is not working for mi my freind , it just get the color on the phone and them the program say error , can you help me my SPL-2.08.0000
Click to expand...
Click to collapse
do you have a tmous phone? in which case you need hspl1024 (see my sig)
if not, try different usb ports, especially try to use one around teh back of the computer
also, dont forget to right click hspl and 'run as administrator'

nO it does not work that way!
Would be a lot easyer if you just gave us the file 1.42.0000.nbh so we could add it to our SDcard and flash it without it locking or not working! Please I beg you send us over the 1.422.0000 file all by itself!
PLEASE!!!!

tictac0566 said:
Maybe this posting here will help you to get answers to your questions...
Click to expand...
Click to collapse
I have the same problem and so does everyone else, they no the files don't work and they won;'t give us the EXACT 1.42.0000.nbh file so we can SD card flash it!
It would be so simple!!!!!!

ok then
samsamuel said:
you are showing your ignorance by getting all demanding, if you had read anything, you would know that spl is part of all official roms.it is not a file in its own right.
the only reason you would be looking for it is if you have a telstra, cos hspl2 works on any spl. in which case you need the 1.49 telstra rom, flash it from sd card and it will downgrade your spl to 1.42
if you don't have a telstra, then you are looking for something you don't need.
Click to expand...
Click to collapse
How come someone sent over a SPL 2.08.0000 which mine used to be 2.10.0000 and that worked just fine, why wouldn't sending over a file 1.42.0000 just like they did with the 2.08.0000 do the same... IT WOULD!

Stuck at bootscreen! (Solved)

9
Hey all,
A friend of mine tried to install android on his HD2.
After installing HSPL it worked fine.
But after flashing MAGLDR the phone gets stuck at the HTC bootscreen.
And I cant get the phone connected to activesync
What did I try:
1. Hard Reset
2. Using a stock rom RUU (ruu_signed.nbh)to flash like this:
a)Formatting the sd card to fat32(16GB)
b)Putting ruu_signed.nbh on the sd card and renaming it to leoimg.nbh.
(I tried the Unbranded and the NLD RUU)
c)Turning phone on with vol down.
After the thrid step (c) I get on a screen that says "Loading..." but after 30 minuts nothing happen.
Anyone! What do I need to do?
Greetz,
Michka
BTW i got my ruu_signed.nbh files from the %temp% folder of the RUU installer.exe
This is what he gets on the tripel color screen.
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40

The SD card should be freshly formatted, FAT32 format.
It´s not easy to find out what went wrong with MAGLDR.
Did you use the latest version, 1.13?
What HSPL and what Radio ROM version were on the device?
And finally, do you still get into the bootloader screen (vol. down + power),
what does it say in there?

tictac0566 said:
The SD card should be freshly formatted, FAT32 format.
It´s not easy to find out what went wrong with MAGLDR.
Did you use the latest version, 1.13?
What HSPL and what Radio ROM version were on the device?
And finally, do you still get into the bootloader screen (vol. down + power),
what does it say in there?
Click to expand...
Click to collapse
Yes i used the latesd version o MAGLDR,
HSPL 3
Radio dont remember
Yes i can get in the bootloaderscreen.

Well, then please provide as much information as possible.
It´s really hard or even impossible to help without more information.
It´s a bit like: My car is broken. What should I do?
"A stock ROM" is very tight information...
For your reference, flashing through SD card deletes HSPL, that´s why I asked
what the bootscreen information says...

tictac0566 said:
Well, then please provide as much information as possible.
It´s really hard or even impossible to help without more information.
It´s a bit like: My car is broken. What should I do?
"A stock ROM" is very tight information...
For your reference, flashing through SD card deletes HSPL, that´s why I asked
what the bootscreen information says...
Click to expand...
Click to collapse
Oke if someone could help me I will provide some info tomorrow.
(I need to ask my friend cus i havent got the phone in my possesion)

This is what he gets on the tripel color screen.
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Sent from my HTC Wildfire using XDA App

Bump
Sent from my HTC Wildfire using XDA App

See, the information you posted is helpful indeed.
You still have SPL 2.08.0000 on your device instead of 2.08.HSPL. On the other hand, I still don´t know what your original ROM was.
Please try to re-install with HSPL3.exe, and please make sure to install the correct Radio ROM in case you don´t have it yet, should be 2.15.50.14.
Both items are required to run MAGLDR properly.
If your attempt to flash a stock ROM failed, then something else was wrong.

There are known problems flashing with 8GB, or greater, SD Cards.
Put the phone into Bootloader Mode and then connect to the PC.
Run HSPL3 and select 2.08.HSPL
Put the phone into Bootloader Mode and then connect to the PC.
Download and flash the RADIO 2.15.50.14.
Put the phone into Bootloader Mode and then connect to the PC.
Now you are ready to go through the MAGLDR instructions and NANDRIOD flashing.

fred_up said:
There are known problems flashing with 8GB, or greater, SD Cards.
Put the phone into Bootloader Mode and then connect to the PC.
Run HSPL3 and select 2.08.HSPL
Put the phone into Bootloader Mode and then connect to the PC.
Download and flash the RADIO 2.15.50.14.
Put the phone into Bootloader Mode and then connect to the PC.
Now you are ready to go through the MAGLDR instructions and NANDRIOD flashing.
Click to expand...
Click to collapse
Thanks for adding that hint, I keep forgetting this very fact.
I do have the 2GB card which came with the device ready for flashing purposes... it was even my Goldcard at very early stages.

Oke thx for the replies.
I will try it tonight!
Greetz,
Michka
Sent from my HTC Wildfire using XDA App

Thank you guys.
The problem was hspl.
Because of the sd card (i think) hspl wasnt flashed right. So i couldnt install a radio or get magldr working. Now i reinstalled hspl and i can do anything.
So what i did in short:
1. Reinstalled hspl 3.00 with a 2gb sd.
2. Flashed the right radio.
3. So now magldr was working
4. Flashed the nld stock rom(to be 100% sure everyting works).
5. Reflashed magldr 1.03 again.
6. Flashed an android disre hd rom (standard nand rom doesnt seem to work).
7. We are happy everything works.
Thx again!
Sent from my HTC Wildfire using XDA App

[Q] Flashing a german HD2 with a stock rom

Hello,
I had my phone repaired where they changed its motherboard so now instead of being with an english WWE rom it has a german one. My point is that I want to install android on my memory card and also install a normal english rom on my phone. Can anyone suggest me what radio, stock rom and anything else do I have to install.
Currently this is what I have:
rom 3.14.162.5 04666 ger
manilla 2.5.20181527.1
radio 2.15.50.14
Also this rom has vodafone splash screen and installed vodafone apps.
To summarise my post:
How can I make my phone in english (change the stock rom)?
What do I need to do to make it ready for Android?

bootloader
usb
hspl4
choose 3.03.hspl
bootloader
usb
run 3.14 wwe rom install
rom and radio should be fine for android.

I just checked and it says that I have SPL 3.03.0000 XE
everything in the bootloader is the following:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
So should I flash HSPL ?

That's why I said to.
See the 3.03.0000? Well whenever it ends. 0000,,,that's a stock spl. Once hspl is installed it ends .hspl, not. 0000

Thanks.
Sorry for asking so noob questions, but I bricked it once and I'm being causious now.

samsamuel said:
That's why I said to.
See the 3.03.0000? Well whenever it ends. 0000,,,that's a stock spl. Once hspl is installed it ends .hspl, not. 0000
Click to expand...
Click to collapse
Just learnt something thank-you
Sent from my HTC HD2 using XDA Premium App

[Q] HD2 freeze at white screen

My phone working fine and it freeze while play games on android. When to remove the battery and then on it and it start like normal phone but its just the white screen with "HTC" text, there are no red texts at all in the bottom and with 6 or 7 vibrate.
When i start it in bootloader mode, it says:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
I try to install new rom, original rom and MAGLDR, all can install but still show the same this as above.
On MAGLDR is just stop at as below:
aMAGLDR V1.13
Build: Feb 1 2011 03:46:07
by Cotulla 2011
then come with 6 or 7 vibrate.
Is there any way for me to get my phone working again or have i totally wrecked it?
Btw, i have tried to hardreset it , but without any difference.

did you try an original windows mobile 6.5 rom without hspl? for example windows mobile @1.66 version an spl 1.66.000?
if there is the same problem with stock spl you shold send your hd2 to the htc service, thats my opinion

KILLAH_42 said:
did you try an original windows mobile 6.5 rom without hspl? for example windows mobile @1.66 version an spl 1.66.000?
if there is the same problem with stock spl you shold send your hd2 to the htc service, thats my opinion
Click to expand...
Click to collapse
It's that means need to use OSPL 2.08 and below and where i can download the ori win6.5 on 2.08 below.

I using HSPL4 to make 3.03.0000 and flash ori rom 3.14.707.3 and it show this error
as per attach.

Have you tried the NBH-file on SD method?

Try ospl 2.08 then flash original rom. Hspl 4 has hspl and spl just make sure to choose the right one from the drop down menu.

se1988 said:
Have you tried the NBH-file on SD method?
Click to expand...
Click to collapse
Try on this with 2 option and result as below
- HSPL 2.08 - cannot complete if not mistake it stop at bootloader from the checklist
- OSPL 2.08 - stuck on loading ........
Using Radio 2.15.50.14
Using Original Rom Leo Asia WWE.1.66.707.1
Anymore solution .... Pls

If I recall correctly you need to install ospl 1.66 since you are using a euro phone. The following link will have hspl 2 which you can restore ospl 1.66 with hspl 2.
http://forum.xda-developers.com/showpost.php?p=5279234&postcount=3
tomguyz said:
Try on this with 2 option and result as below
- HSPL 2.08 - cannot complete if not mistake it stop at bootloader from the checklist
- OSPL 2.08 - stuck on loading ........
Using Radio 2.15.50.14
Using Original Rom Leo Asia WWE.1.66.707.1
Anymore solution .... Pls
Click to expand...
Click to collapse

Nemesis1278 said:
If I recall correctly you need to install ospl 1.66 since you are using a euro phone. The following link will have hspl 2 which you can restore ospl 1.66 with hspl 2.
http://forum.xda-developers.com/showpost.php?p=5279234&postcount=3
Click to expand...
Click to collapse
Should I flash from the RGB screen or HTC white screen? ....
Try before on SPL 1.66.0000 flash from RGB screen just stuck not running.

It's from RGB screen that you need to install from. Strange that it gets stuck. I am guessing you may need to install hspl to go backwards first.
tomguyz said:
Should I flash from the RGB screen or HTC white screen? ....
Try before on SPL 1.66.0000 flash from RGB screen just stuck not running.
Click to expand...
Click to collapse
Sent from my HTC Sensation 4G using XDA App

Nemesis1278 said:
It's from RGB screen that you need to install from. Strange that it gets stuck. I am guessing you may need to install hspl to go backwards first.
Click to expand...
Click to collapse
What means by install HSPL to go bsckwards 1st? .....
I have install HSPL 1.66 and install install Ori 1.66 rom but still the same freeze at the HTC white screen ......

Are you able to install original rom now that you have ospl 1.66 installed?
tomguyz said:
What means by install HSPL to go bsckwards 1st? .....
I have install HSPL 1.66 and install install Ori 1.66 rom but still the same freeze at the HTC white screen ......
Click to expand...
Click to collapse

Nemesis1278 said:
Are you able to install original rom now that you have ospl 1.66 installed?
Click to expand...
Click to collapse
Nope on OSPL 1.66 with ori rom 1.66 it show ERROR [294] : INVALID VENDER ID after 1% on the RUU installer and phone go restart.

Anybody can help around ... Please .... Any can help .....

Is that anyone can help here??

Any expert can help me out on this or I need to send to the shop to repair it?

tomguyz said:
Any expert can help me out on this or I need to send to the shop to repair it?
Click to expand...
Click to collapse
Can you tell me what have you tried all with this phone to repair it?

se1988 said:
Have you tried the NBH-file on SD method?
Click to expand...
Click to collapse
Well, have you tried it yet??

Bad news!
tomguyz said:
Anybody can help around ... Please .... Any can help .....
Click to expand...
Click to collapse
I think it is the heating issue related to BGA...(hardware=CPU).
Put your device in a fridge for 1-2 hours and then try to reflash it by USB or SDcard: if it boots ok and after a while freezes(and same time it's getting hot), it's a hardware related issue(it's about CPU, as far as I know no certified solutions!), if still no booting, it's something else(maybe easier to fix).

Hi,
I had the same problem on the HD2 and a desire. I tried for hours to recover it but nothing worked. The only way to fix this was to perform a JTAG or sending it back to HTC.

[Q] is this stock htc hd2??

hey guys, i had (and still have) a non responding touchscreen on my htc hd2. I am now trying to get it back to stock to send it in, cause it still has warranty...
anyway, i downloaded winmob6.5 from the htc side, its a vodafone branding, so i downloaded the one where it says vodafone=) its a phone from germany.
I did task 29, and then installed the rom. (phone still had 2.08HSPL). afterwards i installed 2.08 SPL with hd2 toolkit.
The phone now reads:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MircoP(TOUCH) 0x50
in bootloader and:
R 2.15.50.14
G 15.42.50.11U
D 3.14.04666
when starting up.
my questions now are:
IS THIS ABLE TO BE SENT IN?
DO I HAVE TO CHANGE THE RADIO? IF SO,WHICH ONE?
ANYTHING I HAVE TO DO DIFFERENT TO MY WAY OF TRYING TO GET IT BACK TO STOCK??
help would be so much appreciated guys!
thanks in advance
(i posted this in the question and answer forum before, but no response, so im trying again here, cause i really dont wanna loose that phone for nothing...)

I think you have to change your SPL to either 3.03, 1.66 or anything other than 2.08.
Because as far as I know, that SPL you have is for T-mous only, having it on means you've "HSPL-ed" your device, and since your device is not a T-Mous .....
I'm not sure about the above, wait for someone more experienced to confirm.

wAVe4s said:
hey guys, i had (and still have) a non responding touchscreen on my htc hd2. I am now trying to get it back to stock to send it in, cause it still has warranty...
anyway, i downloaded winmob6.5 from the htc side, its a vodafone branding, so i downloaded the one where it says vodafone=) its a phone from germany.
I did task 29, and then installed the rom. (phone still had 2.08HSPL). afterwards i installed 2.08 SPL with hd2 toolkit.
The phone now reads:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MircoP(TOUCH) 0x50
in bootloader and:
R 2.15.50.14
G 15.42.50.11U
D 3.14.04666
when starting up.
my questions now are:
IS THIS ABLE TO BE SENT IN?
DO I HAVE TO CHANGE THE RADIO? IF SO,WHICH ONE?
ANYTHING I HAVE TO DO DIFFERENT TO MY WAY OF TRYING TO GET IT BACK TO STOCK??
help would be so much appreciated guys!
thanks in advance
(i posted this in the question and answer forum before, but no response, so im trying again here, cause i really dont wanna loose that phone for nothing...)
Click to expand...
Click to collapse
+1 to what Marvlesz said, the SPL version needs to be 3.03. I think 1.66 is only stock for the older ROMs with .51 radios, but on ROM version 3.14 the correct SPL is definitely 3.03.

Aren't HSPLs replaced to stock ones (SPLs) when installed signed rom? For example stock HD2 has SPL 3.03. You install 2.08 HSPL After fun with Android you flash stock rom. All changes caused by flashing Android and HSPL are restored to defauld SPL 3.03 That's what I think and remember. Check that.
If not, then download http://forum.xda-developers.com/showthread.php?t=966228 this and flash SPL 3.03

kubekpop said:
Aren't HSPLs replaced to stock ones (SPLs) when installed signed rom? For example stock HD2 has SPL 3.03. You install 2.08 HSPL After fun with Android you flash stock rom. All changes caused by flashing Android and HSPL are restored to defauld SPL 3.03 That's what I think and remember. Chech that.
Click to expand...
Click to collapse
Yes, you are correct. But if you re-read his post, you'll notice that he said he had installed SPL using the NAND toolkit, which gave him (or he chose) SPL 2.08 (only for T-mous).
Whereas flashing his "original" stock ROM via sdcard would've definitely restored his device back to complete stock.

first of all: thanks guys!
@kubekpop i downloaded hspl4 from DFT and installed hspl 3.03.
the phone now reads:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
in bootloader and
R 2.15.50.14
G 15.42.50.11U
D 3.14.04666
when starting up.
What do you guys reckon? ready to be sent in? what about the radio - leave it?
@Marvlesz, I didnt install from SD because i dont have a touchscreen nomore. and i though installing the original RUU via MAGLDR doesnt make sence? so thats why i just plugged it in the pc and started it from there=)
cheers

Yep, that's fine now

But installation from SD doesn't need touchscreen. You just need nbh file (you can take it from temp files after running installer on PC - while it is still running search on drive C:/ [or other system partition] file ruu_signed.nbh And this should be in temp), formated SD without any partitions other than Fat32 (one). You rename ruu_SIGNED.nbh to leoimg.nbh and put it in SD. And via bootloader. But this what you have is enough

yeah nice, ill send it in on wednesday then.... Thanks again guys!
@kubekpop, well thats good to know, but if my phones is ready to be send in like this, ill just leave it that way=) thanks though!