[Q] Stuck at Moto Logo!! [SOLVED] - Droid 2 General

Hey all, upgraded to Fission 1.2 from 1.1. All was going well until the reboot. I have read over the other threads about similar issues, but none really described the process to get unstuck. Please any help would be appreciated.

craigw79 said:
Hey all, upgraded to Fission 1.2 from 1.1. All was going well until the reboot. I have read over the other threads about similar issues, but none really described the process to get unstuck. Please any help would be appreciated.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=770224
SBF back to stock and start all over. Instructions in attached link.

Ok, so I can get into bootloader and using RSD Lite can load a sbf file; however, I get critical error on the phone and RSD says error sending RAM download for bootloader. Is there a specific sbf file I should be using?
And using the rootzwiki sbf file, I get the error in RSD saying "error sending JUMP comand"

http://forum.xda-developers.com/showthread.php?t=804088
I just had the same problem and the .sbf in that post worked perfectly. Follow the link in the Step 1.

Thank you very much!!! I tried the RSD Lite program multiple times, but this really was the key. Everything is up and running again, thanks again!!!

Related

[Q] Bricked Droid [Solved]

I downloaded RSD Lite put SHADO_X6_2.3.13_SYSTEM-ONLY as the file I wanted and started it.
Critical Error: FEBE 0047 shows up on my D2.
On the RSD console it gives the status as: Error sending JUMP connection.
I could really use help!
philiphdouglas said:
I downloaded RSD Lite put SHADO_X6_2.3.13_SYSTEM-ONLY as the file I wanted and started it.
Critical Error: FEBE 0047 shows up on my D2.
On the RSD console it gives the status as: Error sending JUMP connection.
I could really use help!
Click to expand...
Click to collapse
Did you verify the size of the sbf to verify its not corrupt? Where did you get your sbf from? What guide are you using?
Guide
I am using mydroidworld.com/forums/droid-x-mods/4818-tbh-announces-froyo-system-sbf-rsdlite-4-8-a.html as a guide... I am not sure how to check if the file is corrupted or not.
philiphdouglas said:
I am using mydroidworld.com/forums/droid-x-mods/4818-tbh-announces-froyo-system-sbf-rsdlite-4-8-a.html as a guide... I am not sure how to check if the file is corrupted or not.
Click to expand...
Click to collapse
Here try this guide.
http://forum.xda-developers.com/showthread.php?t=804088
Re: When
I got my phone a month and a half ago. It came with 2.2. It is rooted I have clockwork mod installed and krousche (sp?) bootstrap recovery.
I edited my post above. Please try that link. I know that guide works.
I will try that. Will let you know after I get it done if it works.
When it comes to motorola phones, that error generally comes up on newer devices when trying to flash a file that isn't compatible . I used to see issues like that when playing around with RAZR2 V8's. I'd make sure you have the latest version of RSD Lite (that also helps) and try another sbf.
Well I tried using the Linux way with the original .sbf I had. I got the same error message as before. I am now downloading the a955_stuff.sbf from megaupload and will try using that one. Will let you know what happens. Thanks for your time thus far.
bladearronwey said:
When it comes to motorola phones, that error generally comes up on newer devices when trying to flash a file that isn't compatible . I used to see issues like that when playing around with RAZR2 V8's. I'd make sure you have the latest version of RSD Lite (that also helps) and try another sbf.
Click to expand...
Click to collapse
You, sir, hit the nail on the head. Thank you very much. Downloaded the one from the guide mentioned by @theecho. It is now currently updating perfectly no errors so far and you have on your hands one relieved puppy.
Can some:
Moderater edit this thread to [Solved]? Thanks everyone for the help!
you can edit your own post. Just click the edit button on the original post and change the title to have [SOLVED] in the beginning.
Once again thanks!
Can I close this?
theimpaler747 said:
Can I close this?
Click to expand...
Click to collapse
Yes you can!
Cool, glad the problem was fixed!

[q] **need more flashing help**

so i figured out how to get my x with a dead battery prepped for a flash by cutting a usb cord. now using rsd and trying to flash the system file of 2.3.340 it keeps giving me an error like this:
failed flashing process. error processing flash file. (0x700f) phone connected.
what am i doing wrong. i also tried the 2.3.320 file..
both are in c: directory, the drivers are installed, but i'm lost!
i need my phone asap! please help!
brandon2x said:
so i figured out how to get my x with a dead battery prepped for a flash by cutting a usb cord. now using rsd and trying to flash the system file of 2.3.340 it keeps giving me an error like this:
failed flashing process. error processing flash file. (0x700f) phone connected.
what am i doing wrong. i also tried the 2.3.320 file..
both are in c: directory, the drivers are installed, but i'm lost!
i need my phone asap! please help!
Click to expand...
Click to collapse
I started a similar post earlier today. If you go check it out under DX Development it might help. Look for Trouble Flashing All ROM's as the title.
the .34 system isnt an sbf. use the 2.3.32 sbf and reread the MDW thread on how to use the .34 file
what version on RSD are u using?
well got a ton of help from colchiro over on androidforums. this thread can be deleted...

[Defy] Stuck at Bootloader 09.10 - Err:A5,69,4E,00,41

I think the title kinda explains for itself!
From what I started and where I got?
Well, firstly, I tried to install 3.4.3-11 Motorola SBF with fixed Blur provided this link:
"Here you are, buddy
Fixed.SBF plus Nandroid of 3.4.3-11
http://www.multiupload.com/PB10JC9NQV"
(http://forum.xda-developers.com/showthread.php?t=966537&page=7)
I moved to the older PC still running Windows XP to manage RSD Lite 4.9 to work and recognize my Defy. (it apparently worked)
After wiping all data and cache, I started the phone in boot loader mode and tried to use RSD to load the SBF.
Everything seemed to be fine. But.....After RSD finished the update, it said for me to "turn on my Device". Well, it was already on and stuck at Motorola Logo.
I waited for quite some time, took a shower, smoke a cigar.... And, when I came back, nothing, phone was still on moto logo.
I force restarted the phone removing the battery. Still got stuck at moto logo for quite some time.
Sooooo, I decided to wipe everything again and try to install the SBF again, this time with the one provided by "Pays Rom" thread.
That was when stuff got bad.
After that, I got stuck at Bootloader with a "error code" indication.
Alright, it was time to read some more cause I realized I fked something up! Then, I find out I could load a Devtree SBF and that would unbrick the phone being able to install another SBF.
No succecs, eventhoug I tried to load those previous SBF, I still got problems either with RSD Lite or got stuck at bootloader with a that "error code" problem.
As I didnt know what else to do, I loadead back the devtree and got that different error code on the phone. (one mentioned on the thread title).
And, this is pretty much my whole problem! lol
Any Ideas what should I do?
My Defy is from Brazil - Claro and was running 2.1 android at the beggining!
Tyvm!
it seems like we get the similar Err,my defy also stuck at bootloader Err,my Err code is a5 69 35 00 27,if you have solved the problem,please tell me something about it.
oct307 said:
it seems like we get the similar Err,my defy also stuck at bootloader Err,my Err code is a5 69 35 00 27,if you have solved the problem,please tell me something about it.
Click to expand...
Click to collapse
Nothing yet.
Still trying to boot anything in it. If I ever find something, I'll let you know!
I'm getting this error now on RSD Lite when trying to load the SBF 3.4.3-11
Failed Flashing process. Phone[0000]: Error flashing subscriber unit. Device API Error: 0xE003003F Adress: 0xB2383000 Command: ADDR (0xE023203F), phone conected
New error code prompted on Bootloarder:
Err:A5,70,39,00,27
Now it shows Motorola logo for a few seccconds.
Stuck at code 39 or smthing while trying to install another SBF (the one with PAys Rom)
Ok, it unstucked, now RSD shows "restarting" and the motorola logo is on screen.
Finally, it loaded.
I used Pays Rom after a few tries with the first fixed SBF and jumping to the Pays Rom SBF.
After sometime, it installed!!!!!
The phone just started!!!!!
How about your problem mate, wich point are u at?
To solve both of your problems:
download and install the original 3.4.3-11 sbf, no nandroid or anything else.
You should allways be able to get into the original motorola boot loader and from there install any of their SBF, but some of the sbf versions with android do not allow downgrader, therefore you should be sure to use the same version and not a lower one.
pomah said:
To solve both of your problems:
download and install the original 3.4.3-11 sbf, no nandroid or anything else.
You should allways be able to get into the original motorola boot loader and from there install any of their SBF, but some of the sbf versions with android do not allow downgrader, therefore you should be sure to use the same version and not a lower one.
Click to expand...
Click to collapse
Thank you!
I managed to find that out by myself, but thanks for the help!!
I noticed it was a not downgradable version, but I don't really care as it fits what I was aiming and I don't have any intetions of going back to 2.1!
pomah said:
To solve both of your problems:
download and install the original 3.4.3-11 sbf, no nandroid or anything else.
You should allways be able to get into the original motorola boot loader and from there install any of their SBF, but some of the sbf versions with android do not allow downgrader, therefore you should be sure to use the same version and not a lower one.
Click to expand...
Click to collapse
thank you very much!
i have used 3.4.3_11-Stock._BLUR.sbf,but it doesn't work!it's still be stuck at bootloader 09.10 Err:a5,69,35,00,27.
i don't know what's the meaning of the errcode
hello,
I also have a similar problem, stuck on the bootloader but I have the "low battery cannot program" error. When I try to charge the battery, the battery appears with a "?" inside...
Does anyone already get this problem ? Battery out of order ? software problem ?
Use the macgyver method with usb cables. Search the forum and be brave. I had the same problem
Sent from my MB525 using Tapatalk
lanfearxt said:
Use the macgyver method with usb cables. Search the forum and be brave. I had the same problem
Sent from my MB525 using Tapatalk
Click to expand...
Click to collapse
this is the post: http://forum.xda-developers.com/showthread.php?t=892026&highlight=battery+charge
thanks for the link
it will help me saving my defy....
oct307 said:
thank you very much!
i have used 3.4.3_11-Stock._BLUR.sbf,but it doesn't work!it's still be stuck at bootloader 09.10 Err:a5,69,35,00,27.
i don't know what's the meaning of the errcode
Click to expand...
Click to collapse
I'm having this same problem.. anyone successfully fixed this?
try this
try apply this Full SBF 2.3 orange http://forum.xda-developers.com/showthread.php?t=1106375
or
2.1 SBF http://and-developers.com/sbf:defy
this is is a sign error in someone codegroup.
slayps said:
try apply this Full SBF 2.3 orange http://forum.xda-developers.com/showthread.php?t=1106375
or
2.1 SBF http://and-developers.com/sbf:defy
this is is a sign error in someone codegroup.
Click to expand...
Click to collapse
I tried a 2.1 SBF and it gave me a black screen.. the phone turns on, but keeps black.. so I re-flashed with a 2.2 sbf and got back to the same error..
Now I'm downloading the Orange 2.3 sbf file.. I dunno if it will work because I already tried 8 different sbf files
renatojf said:
I tried a 2.1 SBF and it gave me a black screen.. the phone turns on, but keeps black.. so I re-flashed with a 2.2 sbf and got back to the same error..
Now I'm downloading the Orange 2.3 sbf file.. I dunno if it will work because I already tried 8 different sbf files
Click to expand...
Click to collapse
I'm having this same problem.. anyone successfully fixed this?
neozhu said:
I'm having this same problem.. anyone successfully fixed this?
Click to expand...
Click to collapse
1) Try flashing on different PC to start fresh.
2) If you'd flashed so many sbf. You might not be able to remember them all. My guess is that you might be at froyo state(corrupted/failed system code), thus flashing another Eclair 2.1 sbf would not solve your issue. You must try on Froyo sbf only starting from bootloader mode and rsdlite 4.9 or 5.0.
3) Take note of your battery level as it might draining down while you attempting to put some resuraction on the device.
4) Try relax and take a bath and smoke a bigger cigar just like the OP of this thread did...
i too have this same problem, exept i dont know what ver i had and i flashed so many sbf. ive found some sbf that work but i get no signal.
JDM-Bb said:
i too have this same problem, exept i dont know what ver i had and i flashed so many sbf. ive found some sbf that work but i get no signal.
Click to expand...
Click to collapse
no signal..? have you try baseband switcher application..?
yes ive try that with no luck.
hELLO
Please, tell me how to solve that problem with bootloader error A5, 70, 39,00 27 in my defy?? You have said you solved it. please help
you need to be calm and cool with lot of patience. It takes upto 10 - 15 Minutes...
the flashing happens at the speed of your computer.
try to use original cables and use USB ports of your desktop motherboard or laptop without any extension cables.
keep your pc in NO SLEEP mode. Batter should be almost full before flashing ...these are some tips...

RSD Lite freezes HELP!

So basically I flashed Motarola Defy MB525 using RSD Lite because it kept rebooting at start up. I used this SBF to flash it: The Vodafone Britain version:
JRDNEM_U3_3.4.2_179-4.4_VFSBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYOVFGB_P021_A020_M001_HWp3_Service1FF.sbf.gz
At first it worked fine but then after a couple of days it started rebooting again, so I'm trying to reflash it using RSD Lite again using the same SBF but for some reason it gets stuck at Phone[000]: Flashing Code Group 39: Executed 52%.
After about 30 min of waiting it just fails? Please help what can I do? I'm new to this whole thing, p.s the phones never been rooted. I've tried reading the all in one defy beginners but I just don't get it.
Help!
Anyone? Please help.
ChotaDon said:
Anyone? Please help.
Click to expand...
Click to collapse
There are a few options
1) The sbf may have been corrupted, so try re-downloading and see if that works. Alternately try a different country's SBF for same android version. Be careful to NOT flash a Defy+ sbf (which can't be downgraded) on your Defy.
2) If you keep getting the same issue, then try latest/different version of rsdlite.
Best of luck!

[BRICKED] Droid Razr M

Hello! Not sure how this happened. Last night, my girl turned off her Razr M phone and went to sleep. This morning, she tried to turn it on and it was stuck on the "Motorola" logo. After a while, it said that it failed to boot and gave an error. Sent me straight to AP Fastboot mode.
I started researching and somehow the phone is now bricked.
So, my research took me to download RSD Lite and I tried downloading various ROMs and stuff - I'm really new at doing this with Android so bare with me
The latest thing I tried is the PacMan ROM, but RSD Lite gives me the error: "Please check input file. Eithe rxml format is wrong or image files associated with it are missing."
I read somewhere that it's not necessary to use RSD Lite for ROMs, the thing is I can't access my SD card. I don't have a way of getting anything in or out of it. No other devices.
What can I do at this point? I am willing to try anything to get it working again.
Thanks so much for taking the time to read this
iSleek said:
Hello! Not sure how this happened. Last night, my girl turned off her Razr M phone and went to sleep. This morning, she tried to turn it on and it was stuck on the "Motorola" logo. After a while, it said that it failed to boot and gave an error. Sent me straight to AP Fastboot mode.
I started researching and somehow the phone is now bricked.
So, my research took me to download RSD Lite and I tried downloading various ROMs and stuff - I'm really new at doing this with Android so bare with me
The latest thing I tried is the PacMan ROM, but RSD Lite gives me the error: "Please check input file. Eithe rxml format is wrong or image files associated with it are missing."
I read somewhere that it's not necessary to use RSD Lite for ROMs, the thing is I can't access my SD card. I don't have a way of getting anything in or out of it. No other devices.
What can I do at this point? I am willing to try anything to get it working again.
Thanks so much for taking the time to read this
Click to expand...
Click to collapse
to use a custom rom (PAC Man) you need unlocked bootloader and custom recovery....but if you want to return to factory look at this http://www.andromods.com/tips-trick...oid-razr-m-xt907-stock-original-firmware.html its the easiest method i could find that would help you...heres the firmware to flash with rsd lite.... http://sbf.droid-developers.org/phone.php?device=8 .."Android 4.4.2
Blur_Version.183.46.10.XT907.Verizon.en.US" is the one you want.. hope you get it....
---------- Post added at 12:29 PM ---------- Previous post was at 12:23 PM ----------
and heres a great thread of how to unlock bootloader and install roms and stuff....If you up for it...http://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432
Thanks so much for your reply Downloading and trying right now! Will update soon!
crazy4android said:
to use a custom rom (PAC Man) you need unlocked bootloader and custom recovery....but if you want to return to factory look at this http://www.andromods.com/tips-trick...oid-razr-m-xt907-stock-original-firmware.html its the easiest method i could find that would help you...heres the firmware to flash with rsd lite.... http://sbf.droid-developers.org/phone.php?device=8 .."Android 4.4.2
Blur_Version.183.46.10.XT907.Verizon.en.US" is the one you want.. hope you get it....
---------- Post added at 12:29 PM ---------- Previous post was at 12:23 PM ----------
and heres a great thread of how to unlock bootloader and install roms and stuff....If you up for it...http://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432
Click to expand...
Click to collapse
It gives me this error message: "Failed flashing process. 1/18 flash partition "gpt.bin" Phone returned FAIL"
I'm downloading an earlier version of the OS to see what happens.. any other ideas?
iSleek said:
It gives me this error message: "Failed flashing process. 1/18 flash partition "gpt.bin" Phone returned FAIL"
I'm downloading an earlier version of the OS to see what happens.. any other ideas?
Click to expand...
Click to collapse
I've heard of the error before from other threas but i dont recall what the problem was...did you install the motorola drivers? I really dnon't know what it could be..I've nevr had any trouble with it and i've done it a couple of times..
iSleek said:
It gives me this error message: "Failed flashing process. 1/18 flash partition "gpt.bin" Phone returned FAIL"
I'm downloading an earlier version of the OS to see what happens.. any other ideas?
Click to expand...
Click to collapse
This guy had the same error read through that post
We cannot teach people anything; we can only help them discover it within themselves.
iSleek said:
It gives me this error message: "Failed flashing process. 1/18 flash partition "gpt.bin" Phone returned FAIL"
I'm downloading an earlier version of the OS to see what happens.. any other ideas?
Click to expand...
Click to collapse
Open the xml inside the zip you're flashing and remove the line:
Code:
<step operation="flash" partition="partition" filename="gpt.bin" MD5="5B3FD782141145E4BD1C9270D954AFF1" />
Yeah modifying the xml file is necessary, but also make sure your phone is charged above 50 percent. Low battery causes some funky errors with RSD.
Also what version of android were you running? I'd try flashing the new stock KK with RSD to at least get it up and running....then worry about flashing a custom.
The good thing is if you're getting into fastboot, you're not hard bricked and it's salvageable with some work!
Sent from my DROID RAZR M using XDA Free mobile app
Is your boot loader unlocked?
Sent from my XT907 using XDA Free mobile app
Hi,
To answer all the questions:
1- Is your boot loader unlocked? No
2- I've modified the XML file and removed the lines I was advised to remove.
3- Not sure what exact version of Android the device was running, as it's not mine. Also, what is "stock KK"???
4- ezknives, I've read through the post and basically the guy removed lines from the XML file - did that, also uninstalled Moto stuff and installed Motocast. No joy.
Right now, RSD shows the error message "Failed flashing process. 1/16 flash sbl1 "sbl1.mbn" -> Phone returned FAIL."
I am using the 4.4.2 firmware found here: http://sbf.droid-developers.org/phone.php?device=8
Other ideas?
One more bit of info. The eBay seller reports the phone had "Android 4.0.4 Ice Cream Sandwich" installed when she purchased it. Not sure if she updated it or not, but I don't think so. Does this new information change anything?
EDIT: I downloaded and tried out the 4.0.4 version from http://sbf.droid-developers.org/phone.php?device=8 but it stops at the same steps, even after editing out the XML file.
Also tried the utility found here: http://forum.xda-developers.com/showthread.php?t=2207419&page=2 (the latest version).. seems that it does some work but the device still doesn't respond. Gets stuck at Android logo.. and I've tried RSD with all I have (4.0.4 and newwer) but no luck.
OK so.. somehow I managed to flash the stock 4.4.2 version after many tries - using RSD.. it now boots but only to a frozen "M" logo.. and keeps cycling back to it.. any ideas?
ezknives said:
This guy had the same error read through that post.
Click to expand...
Click to collapse
Hi, I was able to flash - or so it seems - 4.4.2 but it gets stuck in a loop (motorola logo, turns off, goes back).. unless i put it back in fastboot.
Will unlocking the bootloader help me? I am trying to get Motorola to give me the code/help me with this, as my device does not have USB debugging turned on. But before I continue "fighting" to get the code, I want to make sure i can use it for something. Can you advise me?
Thanks!!!
iSleek said:
Hi, I was able to flash - or so it seems - 4.4.2 but it gets stuck in a loop (motorola logo, turns off, goes back).. unless i put it back in fastboot.
Will unlocking the bootloader help me? I am trying to get Motorola to give me the code/help me with this, as my device does not have USB debugging turned on. But before I continue "fighting" to get the code, I want to make sure i can use it for something. Can you advise me?
Thanks!!!
Click to expand...
Click to collapse
Re-flash 4.4.2 with RSD Lite one more time. I've read that running it (RSD Lite) twice will help to fix the bootloop issue. As far as unlocking your bootloader, Motorola will not give you a code if you do not own a developer model. You'll need to use Motopocalypse to unlock.
> http://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432
ezknives said:
This guy had the same error read through that post
We cannot teach people anything; we can only help them discover it within themselves.
Click to expand...
Click to collapse
ATTACK said:
Re-flash 4.4.2 with RSD Lite one more time. I've read that running it (RSD Lite) twice will help to fix the bootloop issue. As far as unlocking your bootloader, Motorola will not give you a code if you do not own a developer model. You'll need to use Motopocalypse to unlock.
> http://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432
Click to expand...
Click to collapse
This would be the 4th time successfully flashing 4.4.2 with RSD Lite, but I will do it just to see what happens. About unlocking the bootloader.. it's still not clear to me what I will gain if I can get it unlocked.. Can you enlighten me? Thanks!
iSleek said:
About unlocking the bootloader.. it's still not clear to me what I will gain if I can get it unlocked.. Can you enlighten me? Thanks!
Click to expand...
Click to collapse
Head to the link I posted and read the FAQ section.

Categories

Resources