Database Users

[Q] Stuck at Moto Logo!! [SOLVED]

Hey all, upgraded to Fission 1.2 from 1.1. All was going well until the reboot. I have read over the other threads about similar issues, but none really described the process to get unstuck. Please any help would be appreciated.

craigw79 said:
Hey all, upgraded to Fission 1.2 from 1.1. All was going well until the reboot. I have read over the other threads about similar issues, but none really described the process to get unstuck. Please any help would be appreciated.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=770224
SBF back to stock and start all over. Instructions in attached link.

Ok, so I can get into bootloader and using RSD Lite can load a sbf file; however, I get critical error on the phone and RSD says error sending RAM download for bootloader. Is there a specific sbf file I should be using?
And using the rootzwiki sbf file, I get the error in RSD saying "error sending JUMP comand"

http://forum.xda-developers.com/showthread.php?t=804088
I just had the same problem and the .sbf in that post worked perfectly. Follow the link in the Step 1.

Thank you very much!!! I tried the RSD Lite program multiple times, but this really was the key. Everything is up and running again, thanks again!!!

Need help.. Bootloader Err:A5,70,70,00,1F

I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??

anducly said:
I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??
Click to expand...
Click to collapse
What phone D2 or D2 G and which SBF did you use?
I assume you used the 2.2.00 sbf when you needed the 2.3.20 SBF once you have the 2.3.20 update the bootloader is changed and won't accept the 2.2.0 sbf.
IF that's the case you need to try flashing it with the 2.3.20 SBF found HERE
Read the bottom of THIS post if you get a bootloop or stuck at the M logo screen.

it works!! Thank you so much!!

anducly said:
it works!! Thank you so much!!
Click to expand...
Click to collapse
Glad it worked but what specifically worked? I gave a bunch of information, I just want to know which pieces helped in your case.

THANK YOU SOOOOOOOOO MUCH!!!!! I know that this post is a little old but I thought that my phone was finished. Again Thank You!

Thank you sooooooo much!!!! I thought all hope was lost.

Had this problem the other night but all is good now
Sent from my Motorola Droid 2 with Fission 2.3.1

This worked to fix my phone, thx so much
i used the 2.3.20 SBF

will this work on the droid x?

myrakle said:
will this work on the droid x?
Click to expand...
Click to collapse
You probably flashed the wrong SBF. You need to find the latest DX SBF they should be found in the DX section of XDA. Off the top of my head I can't think of the latest release.
Sent from my DROID2 using XDA App

anducly said:
I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??
Click to expand...
Click to collapse
I have a similar problem. I just got this phone and dont know the history other than the ESN is clear with vzw. It goes str8 to the BL screen and has this...
Bootloader
D2.35
Battery OK
OK to program
Tranfer Mode: USB
I Dloaded RSD lite 4.7 an the 2.35 BL sbf as well as the orig 2.2 and 2.3 FW sbf's. RSD will communicate with the phone. I can reload the BL sbf if I open the sbf file but none of the FW sbf will load in RSD, the start button command stays grayed out. Also in RSD on line 1 of the phone status it shows connected but above that in the device properties box info for the meid/esn etc show N/A.
I can access the recovery menu and at the bottom there is an error report for accessing recovery cache in a folder path.
Can I put an update.zip on an sd card and try to revive this thing that way or maybe I am doing something wrong? I am guessing this is the result of some botched flash job.
I have done some modding on my Droid X such as backing it up, deodexing and put the Liberty ROM on it as well and changing ROMS on my android tablet so I have some of the basics down but after much searching & reading I am seeking help with this one. Thanks in advance!
Edit: Now my battery is dead, I have found in other threads that a blank software device wont charge the battery if this helps

Ronbo85 said:
I have a similar problem. I just got this phone and dont know the history other than the ESN is clear with vzw.
I Dloaded RSD lite 4.7 an the 2.35 BL sbf as well as the orig 2.2 and 2.3 FW sbf's. RSD will communicate with the phone. I can reload the BL sbf if I open the sbf file but none of the FW sbf will load in RSD.
Click to expand...
Click to collapse
Maybe try flashing in linux and make sure you have read up about flashing SBF's on a DX. I don't know which one to flash as this is the D2 section and I have a D2.
I can access the recovery menu and at the bottom there is an error report for accessing recovery cache in a folder path.
Click to expand...
Click to collapse
This error is normal disregard it.
Can I put an update.zip on an sd card and try to revive this thing that way or maybe I am doing something wrong? I am guessing this is the result of some botched flash job.
Click to expand...
Click to collapse
That would work if you can find an update.zip made by moto that will go through the bootloader. And it doesn't really matter how it got here but probably it is a bad flash or a wrong ROM. (You might try connecting it via wall charger (not USB) while it's powered down then turn it on and see if you can get into clockwork recovery.)
Edit: Now my battery is dead, I have found in other threads that a blank software device wont charge the battery if this helps
Click to expand...
Click to collapse
You need to find someone with a DX to swap/charge your battery with so you can get in and flash it or you need an external battery charger (one that will charge the battery outside of the phone).
Sent from my DROID2 using XDA App

Hi, thank you for the reply. I know I made comments about my DX I have as well but to be clear this is a Droid 2 I am working on. I will get the battery charged somehow and let you know what I come up with, thanks again

Ronbo85 said:
Hi, thank you for the reply. I know I made comments about my DX I have as well but to be clear this is a Droid 2 I am working on.
Click to expand...
Click to collapse
Oh. In that case you need the 2.3.20 SBF found here http://droid2files.com/tools/VRZ_A955_2.3.20_1FF_01.sbf after you can get the phone charged. (If it helps the D2 has the same size battery as the D1 so you can swap/charge a D2 battery with a D2 or a D1.)
Also try finding RSDLite 4.8 or 4.9 as they might work better for you. I'd give you a link but I Haven't flashed an SBF with RSDlite I just use linux.
Sent from my DROID2 using XDA App

Cool thank you again. I got the battery charging via a rig I have done before with other devices from a camera charger. My linux(zorin) machine lost keyboard function out of the clear blue I havent had a chance to sort it yet(another project lol) but I do have a live usb thumb drive setup to use for linux. I'll try on this windows machine for now.
I'll keep you posted as to the results

well I got the battery charged up. I still have this problem when I select either the 2.2 or 2.3 sbf files the start button for applying the flash stays grayed out as if the files are invalid. If I select a bootloader sbf the start button is ok and I can load the BL sbf. I tried switching to rsd 4.8 too. I will keep playing around with it and maybe try to get my linux pc going.

Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away

Ronbo85 said:
Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away
Click to expand...
Click to collapse
Are you still using rsdlite 4.7? I had problems with it not too long ago. Downloaded 4.8 and worked like a charm. Hope you get it sorted out.
Sent from my ultra fast Liberated Droid 2

Ronbo85 said:
Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away
Click to expand...
Click to collapse
You might need to put the file in the C: drive of your windows box. At least that's what a another forum post found from a Google search suggested.
Or try linux Check here for more info: http://forum.xda-developers.com/showthread.php?t=804088. It's an old version of Ubuntu and there are somethings I want to add to it, I'll be updating it as soon as I have some free time to put it together using the 10.10 version.

I found this link... http://androidforums.com/droid-all-...-failed-flashing-process-0x7100-rsd-lite.html check out post #32
It does make a difference where the file is located yes and I got the sbf to perform the flash but after a lengthy process looks like about 3 steps and it takes 3-5 min I end up with a fail messege. There is more info I could provide but its been a long Monday I need to give it a break and now the batt is low again.
Thank you all again for your much appreciated help. I will regroup tomorrow. I will try to log in on my phone to see any ideas I mite need to think over.

[Q] RSD Lite not recognizing Droid X

I am stuck on the BootLoader screen after installing the 2.3.340 update.zip.
I'm trying to flash the 2.3.320 sbf file using RSD Lite but it isn't recognizing my phone. I reinstalled the drivers and restarted my machine.
RSD Lite shows a device connect to USB Port 1
But it says :
Model - S Flash OMAP3630 MI
IMEI/ESN/MEID - N/A
When I try to flash the sbf file I get a Status of 'Failed Flashing Process, Unable to retrieve initialization values from INI file (0x7029); phone connected

What version of RSD?

mob87 said:
What version of RSD?
Click to expand...
Click to collapse
Version 4.6

You need 4.8 or above

mob87 said:
You need 4.8 or above
Click to expand...
Click to collapse
Downloaded version 4.9. Will test it out and let you know.

tgadd said:
Downloaded version 4.9. Will test it out and let you know.
Click to expand...
Click to collapse
Still not working. Going to go to Verizon and sweeten up with a rep. Thanks for the help.

Do you have the Droid X drivers installed? Did you run as administrator?

mob87 said:
Do you have the Droid X drivers installed? Did you run as administrator?
Click to expand...
Click to collapse
Yes and yes.
My battery ran out last night so I'm having a co-worker charge it up for me. I'm going to try one last time when I get off work today and then head over to Verizon.

im having a simiar issue but rsd lite 4.8 wont even recognize my device and i sweaer ive got the drivers but im unable to find them or a guide to make sure i even installed them correctly, could i get pointed to where they are please

Download the driver from here, not the charging one but the other one, unzip and install.
http://www.motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD

mob87 said:
Download the driver from here, not the charging one but the other one, unzip and install.
http://www.motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD
Click to expand...
Click to collapse
That is what I've installed and still no luck.

I think it's working. All looks to be in good order. Flashing at the moment

tgadd said:
I think it's working. All looks to be in good order. Flashing at the moment
Click to expand...
Click to collapse
I found out that error 0x7029 usually related that the .sbf file is not in the C:\ root folder. So I moved it there.
Then I couldn't hit "start" after selecting the .sbf file because "start" was greyed out. I found a post here explaining how to fix it.
Follow his steps completely and it'll solve this problem.

Give RSD a little time to see your phone too. The first time I ran it, I had to wait about a minute until it populated, now it comes right up. I had a terrible time getting it to work though... Just keep tryin'!

[Defy] Stuck at Bootloader 09.10 - Err:A5,69,4E,00,41

I think the title kinda explains for itself!
From what I started and where I got?
Well, firstly, I tried to install 3.4.3-11 Motorola SBF with fixed Blur provided this link:
"Here you are, buddy
Fixed.SBF plus Nandroid of 3.4.3-11
http://www.multiupload.com/PB10JC9NQV"
(http://forum.xda-developers.com/showthread.php?t=966537&page=7)
I moved to the older PC still running Windows XP to manage RSD Lite 4.9 to work and recognize my Defy. (it apparently worked)
After wiping all data and cache, I started the phone in boot loader mode and tried to use RSD to load the SBF.
Everything seemed to be fine. But.....After RSD finished the update, it said for me to "turn on my Device". Well, it was already on and stuck at Motorola Logo.
I waited for quite some time, took a shower, smoke a cigar.... And, when I came back, nothing, phone was still on moto logo.
I force restarted the phone removing the battery. Still got stuck at moto logo for quite some time.
Sooooo, I decided to wipe everything again and try to install the SBF again, this time with the one provided by "Pays Rom" thread.
That was when stuff got bad.
After that, I got stuck at Bootloader with a "error code" indication.
Alright, it was time to read some more cause I realized I fked something up! Then, I find out I could load a Devtree SBF and that would unbrick the phone being able to install another SBF.
No succecs, eventhoug I tried to load those previous SBF, I still got problems either with RSD Lite or got stuck at bootloader with a that "error code" problem.
As I didnt know what else to do, I loadead back the devtree and got that different error code on the phone. (one mentioned on the thread title).
And, this is pretty much my whole problem! lol
Any Ideas what should I do?
My Defy is from Brazil - Claro and was running 2.1 android at the beggining!
Tyvm!

it seems like we get the similar Err,my defy also stuck at bootloader Err,my Err code is a5 69 35 00 27,if you have solved the problem,please tell me something about it.

oct307 said:
it seems like we get the similar Err,my defy also stuck at bootloader Err,my Err code is a5 69 35 00 27,if you have solved the problem,please tell me something about it.
Click to expand...
Click to collapse
Nothing yet.
Still trying to boot anything in it. If I ever find something, I'll let you know!
I'm getting this error now on RSD Lite when trying to load the SBF 3.4.3-11
Failed Flashing process. Phone[0000]: Error flashing subscriber unit. Device API Error: 0xE003003F Adress: 0xB2383000 Command: ADDR (0xE023203F), phone conected
New error code prompted on Bootloarder:
Err:A5,70,39,00,27
Now it shows Motorola logo for a few seccconds.
Stuck at code 39 or smthing while trying to install another SBF (the one with PAys Rom)
Ok, it unstucked, now RSD shows "restarting" and the motorola logo is on screen.
Finally, it loaded.
I used Pays Rom after a few tries with the first fixed SBF and jumping to the Pays Rom SBF.
After sometime, it installed!!!!!
The phone just started!!!!!
How about your problem mate, wich point are u at?

To solve both of your problems:
download and install the original 3.4.3-11 sbf, no nandroid or anything else.
You should allways be able to get into the original motorola boot loader and from there install any of their SBF, but some of the sbf versions with android do not allow downgrader, therefore you should be sure to use the same version and not a lower one.

pomah said:
To solve both of your problems:
download and install the original 3.4.3-11 sbf, no nandroid or anything else.
You should allways be able to get into the original motorola boot loader and from there install any of their SBF, but some of the sbf versions with android do not allow downgrader, therefore you should be sure to use the same version and not a lower one.
Click to expand...
Click to collapse
Thank you!
I managed to find that out by myself, but thanks for the help!!
I noticed it was a not downgradable version, but I don't really care as it fits what I was aiming and I don't have any intetions of going back to 2.1!

pomah said:
To solve both of your problems:
download and install the original 3.4.3-11 sbf, no nandroid or anything else.
You should allways be able to get into the original motorola boot loader and from there install any of their SBF, but some of the sbf versions with android do not allow downgrader, therefore you should be sure to use the same version and not a lower one.
Click to expand...
Click to collapse
thank you very much!
i have used 3.4.3_11-Stock._BLUR.sbf，but it doesn't work!it's still be stuck at bootloader 09.10 Err:a5,69,35,00,27.
i don't know what's the meaning of the errcode

hello,
I also have a similar problem, stuck on the bootloader but I have the "low battery cannot program" error. When I try to charge the battery, the battery appears with a "?" inside...
Does anyone already get this problem ? Battery out of order ? software problem ?

Use the macgyver method with usb cables. Search the forum and be brave. I had the same problem
Sent from my MB525 using Tapatalk

lanfearxt said:
Use the macgyver method with usb cables. Search the forum and be brave. I had the same problem
Sent from my MB525 using Tapatalk
Click to expand...
Click to collapse
this is the post: http://forum.xda-developers.com/showthread.php?t=892026&highlight=battery+charge

thanks for the link
it will help me saving my defy....

oct307 said:
thank you very much!
i have used 3.4.3_11-Stock._BLUR.sbf，but it doesn't work!it's still be stuck at bootloader 09.10 Err:a5,69,35,00,27.
i don't know what's the meaning of the errcode
Click to expand...
Click to collapse
I'm having this same problem.. anyone successfully fixed this?

try this
try apply this Full SBF 2.3 orange http://forum.xda-developers.com/showthread.php?t=1106375
or
2.1 SBF http://and-developers.com/sbf:defy
this is is a sign error in someone codegroup.

slayps said:
try apply this Full SBF 2.3 orange http://forum.xda-developers.com/showthread.php?t=1106375
or
2.1 SBF http://and-developers.com/sbf:defy
this is is a sign error in someone codegroup.
Click to expand...
Click to collapse
I tried a 2.1 SBF and it gave me a black screen.. the phone turns on, but keeps black.. so I re-flashed with a 2.2 sbf and got back to the same error..
Now I'm downloading the Orange 2.3 sbf file.. I dunno if it will work because I already tried 8 different sbf files

renatojf said:
I tried a 2.1 SBF and it gave me a black screen.. the phone turns on, but keeps black.. so I re-flashed with a 2.2 sbf and got back to the same error..
Now I'm downloading the Orange 2.3 sbf file.. I dunno if it will work because I already tried 8 different sbf files
Click to expand...
Click to collapse
I'm having this same problem.. anyone successfully fixed this?

neozhu said:
I'm having this same problem.. anyone successfully fixed this?
Click to expand...
Click to collapse
1) Try flashing on different PC to start fresh.
2) If you'd flashed so many sbf. You might not be able to remember them all. My guess is that you might be at froyo state(corrupted/failed system code), thus flashing another Eclair 2.1 sbf would not solve your issue. You must try on Froyo sbf only starting from bootloader mode and rsdlite 4.9 or 5.0.
3) Take note of your battery level as it might draining down while you attempting to put some resuraction on the device.
4) Try relax and take a bath and smoke a bigger cigar just like the OP of this thread did...

i too have this same problem, exept i dont know what ver i had and i flashed so many sbf. ive found some sbf that work but i get no signal.

JDM-Bb said:
i too have this same problem, exept i dont know what ver i had and i flashed so many sbf. ive found some sbf that work but i get no signal.
Click to expand...
Click to collapse
no signal..? have you try baseband switcher application..?

yes ive try that with no luck.

hELLO
Please, tell me how to solve that problem with bootloader error A5, 70, 39,00 27 in my defy?? You have said you solved it. please help

you need to be calm and cool with lot of patience. It takes upto 10 - 15 Minutes...
the flashing happens at the speed of your computer.
try to use original cables and use USB ports of your desktop motherboard or laptop without any extension cables.
keep your pc in NO SLEEP mode. Batter should be almost full before flashing ...these are some tips...

2.2.1 SBF for Motorola Bravo

Anything YOU do to YOUR phone is not my fault, please proceed with caution​
To apply:​1. Download RSD Lite, Drivers, and .sbf files from below
2. Install RSD Lite
3. Open RSD Lite as administer (hold shift, right-click on RSD Lite, select Run as administer)
4. Unzip the .gz and extract the .sbf
5. In RSD Lite, browse for the .sbf and select it.
6. Power your phone into the bootloader (hold volume up and power on, should be a black screen with white text)
[If the bootloader screen says Cannot program, your battery is too low to apply .sbf]
7. Plug phone in and run the driver installer
8. RSD should recognize your phone now
9. Select you phone and press Start
10. Wait for it to finish​
Whatever you do, do not unplug your phone from computer or disconnect them in any way
Note: If you bootloop and are stuck at the red M logo, you need to wipe data in stock recovery. To do that, hold the volume down button and continue holding it when you power up the phone. Then, once you see the triangle and android, press both volume buttons at the same time. After that, scroll down and select wipe data/factory reset.​
Downloads:​
2.2.1 SBF: http://www.multiupload.com/6J4DXMTP8Q
RSDLite v5.0: http://www.multiupload.com/I948480VBT
Motorola Driver Installer: http://www.multiupload.com/NWCE2ZXPMF​
Root 2.2.1 with SuperOneClick (with psneuter or Gingerbreak) and enable non-market apps:
http://forum.xda-developers.com/showthread.php?t=803682​

jorgonv said:
Found this by searching Motorola bravo 2.2 sbf on google:
[can't post links, sorry]
htt p://modmymobile.com/forums/629-motorola-bravo-general/561492-stock-sbf-file-bravo.html
Don't know if this is legit and wanted to see what others think
Click to expand...
Click to collapse
OMG! I use to be on modmymobile, but gave up on it. This is LEGENDARY!!
A 2.2 SBF!! You found it. You didn't give up on modmymobile. Great job.

BravoMotorola said:
OMG! I use to be on modmymobile, but gave up on it. This is LEGENDARY!!
A 2.2 SBF!! You found it. You didn't give up on modmymobile. Great job.
Click to expand...
Click to collapse
thank daywalker from modmymobile
is there any way to check if this is legit?

jorgonv said:
thank daywalker from modmymobile
is there any way to check if this is legit?
Click to expand...
Click to collapse
Flash it to your phone. Be the guinea pig

BravoMotorola said:
Flash it to your phone. Be the guinea pig
Click to expand...
Click to collapse
Is that the only way?

No worries, dont wreck your phone people. I have a perfect brick to test this on.
If it works I will have my recovery done this weekend. This is what I have been waiting for.
This had better work!

Just talked with bandroidx, he says it works.

Yep SBF is as good as gold. Fixed my brick, is latest 2.2 and had the code group i needed. Woot!

what do I do with the p4_kobe_umts_kobe_user_3.4.2-125_KOB_FFW-4_product-keys-ATT-US_ATT-signed.sbf.gz file?

laughsatyou said:
what do I do with the p4_kobe_umts_kobe_user_3.4.2-125_KOB_FFW-4_product-keys-ATT-US_ATT-signed.sbf.gz file?
Click to expand...
Click to collapse
Unzip th .gz file. The .sbf will be in there, if you dont know where to go from there, search how to apply an sbf

jorgonv said:
Unzip th .gz file. The .sbf will be in there, if you dont know where to go from there, search how to apply an sbf
Click to expand...
Click to collapse
yea, im installing it with rsd lite, seems to have worked. *crosses fingers*
woo, thx guys.

i have rsd lite and the sbf file but im completley new to this.so i just plug in my phone leave it on and apply the file? or do i put it in a bootloader? if so how?

Couldn't Update So I Used A Stock Froyo SBF and RSDLite 4.8
My Bravo was rooted. So, every time I tried to update it, I got the triangle/exclamation mark thing. There was probably a way around that, but I don't know enough about hacking phones.
Instead, I flashed (at least I think that it was a case of flashing some sort of ROM... I really don't know) a stock version of Android 2.2.1 onto my Bravo, and it worked like a charm.
Now I need to go about figuring out how to root it again, but that's a headache for another day...
I tried to post the link to the SBF download, but this forum wouldn't let me. So, you'll have to find it on your own.

ThaFrankinator said:
i have rsd lite and the sbf file but im completley new to this.so i just plug in my phone leave it on and apply the file? or do i put it in a bootloader? if so how?
Click to expand...
Click to collapse
Look on Youtube for this video "Flashing SPRecovery SBF File to a Motorola Droid."
I just used those instructions to install a stock Froyo SBF on my Bravo using RSD-Lite. Of course, when dude in the video says to press up on some button on the keypad, you will press up on the volume rocker instead.
I would post the link, but this thing won't allow it.
Wow, I'll never post here again... this farkakte board made me wait 5 freaking minutes to correct a typo in my post (not to make a new post, but merely to edit this one.) Unbe-freaking-lievable!

psterrett said:
Now I need to go about figuring out how to root it again, but that's a headache for another day...
I tried to post the link to the SBF download, but this forum wouldn't let me. So, you'll have to find it on your own.
Click to expand...
Click to collapse
SuperOneClick to root it. http://forum.xda-developers.com/showthread.php?t=803682 Download, follow instructions, pretty easy stuff, makes rooting much easier, worked for me on 2.2. Use psneuter option.
Also, there's a link at the beginning of this thread for the SBF, shouldn't be too hard to find it...
psterrett said:
Wow, I'll never post here again... this farkakte board made me wait 5 freaking minutes to correct a typo in my post (not to make a new post, but merely to edit this one.) Unbe-freaking-lievable!
Click to expand...
Click to collapse
It's because you're a new user, chill man.

jorgonv said:
Unzip th .gz file. The .sbf will be in there, if you dont know where to go from there, search how to apply an sbf
Click to expand...
Click to collapse
And if that doesn't work, what should I do?

GeNiO426 said:
And if that doesn't work, what should I do?
Click to expand...
Click to collapse
It should work if you correctly followed all the steps to apply the SBF.
Did you encounter a problem?

jorgonv said:
It should work if you correctly followed all the steps to apply the SBF.
Did you encounter a problem?
Click to expand...
Click to collapse
Yes, and I did follow all of the steps as they were written. I've been encountering the same problem ever since I received the message that there was an update available.
It keeps saying "E:Can't open /cache/recovery/command" whenever I try to run the installation (for the update).
For the RSD Lite program, I keep getting this error: "Failed flashing process. Failed flashing process. Unable to retrieve initialization values from INI file. (0x7029); phone connected"
I have no idea what's wrong. I've tried every solution posted on this board as well as Motorola's site, AT&T's site, and countless hours spent searching Google for an answer/solution.

GeNiO426 said:
Yes, and I did follow all of the steps as they were written. I've been encountering the same problem ever since I received the message that there was an update available.
It keeps saying "E:Can't open /cache/recovery/command" whenever I try to run the installation (for the update).
For the RSD Lite program, I keep getting this error: "Failed flashing process. Failed flashing process. Unable to retrieve initialization values from INI file. (0x7029); phone connected"
I have no idea what's wrong. I've tried every solution posted on this board as well as Motorola's site, AT&T's site, and countless hours spent searching Google for an answer/solution.
Click to expand...
Click to collapse
When you go into recovery mode and select install: update.zip, is "E:Can't open /cache/recovery/command" the only error that shows up?

jorgonv said:
When you go into recovery mode and select install: update.zip, is "E:Can't open /cache/recovery/command" the only error that shows up?
Click to expand...
Click to collapse
Well, that's the first error to show up before I select "apply sdcard:update.zip"
After I select that, this is exactly what comes up:
-- Install from sdcard...
..Finding update package...
Opening update package...
Verifying update package...
E:failed to read footer from /sdcard/update.zip
(Is a directory)
E:signature verification failed
Installation aborted.
That's exactly everything that comes up when I select "apply sdcard:update.zip" at the Android system recovery <2e> screen.