Related
I downloaded RSD Lite put SHADO_X6_2.3.13_SYSTEM-ONLY as the file I wanted and started it.
Critical Error: FEBE 0047 shows up on my D2.
On the RSD console it gives the status as: Error sending JUMP connection.
I could really use help!
philiphdouglas said:
I downloaded RSD Lite put SHADO_X6_2.3.13_SYSTEM-ONLY as the file I wanted and started it.
Critical Error: FEBE 0047 shows up on my D2.
On the RSD console it gives the status as: Error sending JUMP connection.
I could really use help!
Click to expand...
Click to collapse
Did you verify the size of the sbf to verify its not corrupt? Where did you get your sbf from? What guide are you using?
Guide
I am using mydroidworld.com/forums/droid-x-mods/4818-tbh-announces-froyo-system-sbf-rsdlite-4-8-a.html as a guide... I am not sure how to check if the file is corrupted or not.
philiphdouglas said:
I am using mydroidworld.com/forums/droid-x-mods/4818-tbh-announces-froyo-system-sbf-rsdlite-4-8-a.html as a guide... I am not sure how to check if the file is corrupted or not.
Click to expand...
Click to collapse
Here try this guide.
http://forum.xda-developers.com/showthread.php?t=804088
Re: When
I got my phone a month and a half ago. It came with 2.2. It is rooted I have clockwork mod installed and krousche (sp?) bootstrap recovery.
I edited my post above. Please try that link. I know that guide works.
I will try that. Will let you know after I get it done if it works.
When it comes to motorola phones, that error generally comes up on newer devices when trying to flash a file that isn't compatible . I used to see issues like that when playing around with RAZR2 V8's. I'd make sure you have the latest version of RSD Lite (that also helps) and try another sbf.
Well I tried using the Linux way with the original .sbf I had. I got the same error message as before. I am now downloading the a955_stuff.sbf from megaupload and will try using that one. Will let you know what happens. Thanks for your time thus far.
bladearronwey said:
When it comes to motorola phones, that error generally comes up on newer devices when trying to flash a file that isn't compatible . I used to see issues like that when playing around with RAZR2 V8's. I'd make sure you have the latest version of RSD Lite (that also helps) and try another sbf.
Click to expand...
Click to collapse
You, sir, hit the nail on the head. Thank you very much. Downloaded the one from the guide mentioned by @theecho. It is now currently updating perfectly no errors so far and you have on your hands one relieved puppy.
Can some:
Moderater edit this thread to [Solved]? Thanks everyone for the help!
you can edit your own post. Just click the edit button on the original post and change the title to have [SOLVED] in the beginning.
Once again thanks!
Can I close this?
theimpaler747 said:
Can I close this?
Click to expand...
Click to collapse
Yes you can!
Cool, glad the problem was fixed!
Hey all, upgraded to Fission 1.2 from 1.1. All was going well until the reboot. I have read over the other threads about similar issues, but none really described the process to get unstuck. Please any help would be appreciated.
craigw79 said:
Hey all, upgraded to Fission 1.2 from 1.1. All was going well until the reboot. I have read over the other threads about similar issues, but none really described the process to get unstuck. Please any help would be appreciated.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=770224
SBF back to stock and start all over. Instructions in attached link.
Ok, so I can get into bootloader and using RSD Lite can load a sbf file; however, I get critical error on the phone and RSD says error sending RAM download for bootloader. Is there a specific sbf file I should be using?
And using the rootzwiki sbf file, I get the error in RSD saying "error sending JUMP comand"
http://forum.xda-developers.com/showthread.php?t=804088
I just had the same problem and the .sbf in that post worked perfectly. Follow the link in the Step 1.
Thank you very much!!! I tried the RSD Lite program multiple times, but this really was the key. Everything is up and running again, thanks again!!!
I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??
anducly said:
I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??
Click to expand...
Click to collapse
What phone D2 or D2 G and which SBF did you use?
I assume you used the 2.2.00 sbf when you needed the 2.3.20 SBF once you have the 2.3.20 update the bootloader is changed and won't accept the 2.2.0 sbf.
IF that's the case you need to try flashing it with the 2.3.20 SBF found HERE
Read the bottom of THIS post if you get a bootloop or stuck at the M logo screen.
it works!! Thank you so much!!
anducly said:
it works!! Thank you so much!!
Click to expand...
Click to collapse
Glad it worked but what specifically worked? I gave a bunch of information, I just want to know which pieces helped in your case.
THANK YOU SOOOOOOOOO MUCH!!!!! I know that this post is a little old but I thought that my phone was finished. Again Thank You!
Thank you sooooooo much!!!! I thought all hope was lost.
Had this problem the other night but all is good now
Sent from my Motorola Droid 2 with Fission 2.3.1
This worked to fix my phone, thx so much
i used the 2.3.20 SBF
will this work on the droid x?
myrakle said:
will this work on the droid x?
Click to expand...
Click to collapse
You probably flashed the wrong SBF. You need to find the latest DX SBF they should be found in the DX section of XDA. Off the top of my head I can't think of the latest release.
Sent from my DROID2 using XDA App
anducly said:
I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??
Click to expand...
Click to collapse
I have a similar problem. I just got this phone and dont know the history other than the ESN is clear with vzw. It goes str8 to the BL screen and has this...
Bootloader
D2.35
Battery OK
OK to program
Tranfer Mode: USB
I Dloaded RSD lite 4.7 an the 2.35 BL sbf as well as the orig 2.2 and 2.3 FW sbf's. RSD will communicate with the phone. I can reload the BL sbf if I open the sbf file but none of the FW sbf will load in RSD, the start button command stays grayed out. Also in RSD on line 1 of the phone status it shows connected but above that in the device properties box info for the meid/esn etc show N/A.
I can access the recovery menu and at the bottom there is an error report for accessing recovery cache in a folder path.
Can I put an update.zip on an sd card and try to revive this thing that way or maybe I am doing something wrong? I am guessing this is the result of some botched flash job.
I have done some modding on my Droid X such as backing it up, deodexing and put the Liberty ROM on it as well and changing ROMS on my android tablet so I have some of the basics down but after much searching & reading I am seeking help with this one. Thanks in advance!
Edit: Now my battery is dead, I have found in other threads that a blank software device wont charge the battery if this helps
Ronbo85 said:
I have a similar problem. I just got this phone and dont know the history other than the ESN is clear with vzw.
I Dloaded RSD lite 4.7 an the 2.35 BL sbf as well as the orig 2.2 and 2.3 FW sbf's. RSD will communicate with the phone. I can reload the BL sbf if I open the sbf file but none of the FW sbf will load in RSD.
Click to expand...
Click to collapse
Maybe try flashing in linux and make sure you have read up about flashing SBF's on a DX. I don't know which one to flash as this is the D2 section and I have a D2.
I can access the recovery menu and at the bottom there is an error report for accessing recovery cache in a folder path.
Click to expand...
Click to collapse
This error is normal disregard it.
Can I put an update.zip on an sd card and try to revive this thing that way or maybe I am doing something wrong? I am guessing this is the result of some botched flash job.
Click to expand...
Click to collapse
That would work if you can find an update.zip made by moto that will go through the bootloader. And it doesn't really matter how it got here but probably it is a bad flash or a wrong ROM. (You might try connecting it via wall charger (not USB) while it's powered down then turn it on and see if you can get into clockwork recovery.)
Edit: Now my battery is dead, I have found in other threads that a blank software device wont charge the battery if this helps
Click to expand...
Click to collapse
You need to find someone with a DX to swap/charge your battery with so you can get in and flash it or you need an external battery charger (one that will charge the battery outside of the phone).
Sent from my DROID2 using XDA App
Hi, thank you for the reply. I know I made comments about my DX I have as well but to be clear this is a Droid 2 I am working on. I will get the battery charged somehow and let you know what I come up with, thanks again
Ronbo85 said:
Hi, thank you for the reply. I know I made comments about my DX I have as well but to be clear this is a Droid 2 I am working on.
Click to expand...
Click to collapse
Oh. In that case you need the 2.3.20 SBF found here http://droid2files.com/tools/VRZ_A955_2.3.20_1FF_01.sbf after you can get the phone charged. (If it helps the D2 has the same size battery as the D1 so you can swap/charge a D2 battery with a D2 or a D1.)
Also try finding RSDLite 4.8 or 4.9 as they might work better for you. I'd give you a link but I Haven't flashed an SBF with RSDlite I just use linux.
Sent from my DROID2 using XDA App
Cool thank you again. I got the battery charging via a rig I have done before with other devices from a camera charger. My linux(zorin) machine lost keyboard function out of the clear blue I havent had a chance to sort it yet(another project lol) but I do have a live usb thumb drive setup to use for linux. I'll try on this windows machine for now.
I'll keep you posted as to the results
well I got the battery charged up. I still have this problem when I select either the 2.2 or 2.3 sbf files the start button for applying the flash stays grayed out as if the files are invalid. If I select a bootloader sbf the start button is ok and I can load the BL sbf. I tried switching to rsd 4.8 too. I will keep playing around with it and maybe try to get my linux pc going.
Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away
Ronbo85 said:
Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away
Click to expand...
Click to collapse
Are you still using rsdlite 4.7? I had problems with it not too long ago. Downloaded 4.8 and worked like a charm. Hope you get it sorted out.
Sent from my ultra fast Liberated Droid 2
Ronbo85 said:
Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away
Click to expand...
Click to collapse
You might need to put the file in the C: drive of your windows box. At least that's what a another forum post found from a Google search suggested.
Or try linux Check here for more info: http://forum.xda-developers.com/showthread.php?t=804088. It's an old version of Ubuntu and there are somethings I want to add to it, I'll be updating it as soon as I have some free time to put it together using the 10.10 version.
I found this link... http://androidforums.com/droid-all-...-failed-flashing-process-0x7100-rsd-lite.html check out post #32
It does make a difference where the file is located yes and I got the sbf to perform the flash but after a lengthy process looks like about 3 steps and it takes 3-5 min I end up with a fail messege. There is more info I could provide but its been a long Monday I need to give it a break and now the batt is low again.
Thank you all again for your much appreciated help. I will regroup tomorrow. I will try to log in on my phone to see any ideas I mite need to think over.
I am stuck on the BootLoader screen after installing the 2.3.340 update.zip.
I'm trying to flash the 2.3.320 sbf file using RSD Lite but it isn't recognizing my phone. I reinstalled the drivers and restarted my machine.
RSD Lite shows a device connect to USB Port 1
But it says :
Model - S Flash OMAP3630 MI
IMEI/ESN/MEID - N/A
When I try to flash the sbf file I get a Status of 'Failed Flashing Process, Unable to retrieve initialization values from INI file (0x7029); phone connected
What version of RSD?
mob87 said:
What version of RSD?
Click to expand...
Click to collapse
Version 4.6
You need 4.8 or above
mob87 said:
You need 4.8 or above
Click to expand...
Click to collapse
Downloaded version 4.9. Will test it out and let you know.
tgadd said:
Downloaded version 4.9. Will test it out and let you know.
Click to expand...
Click to collapse
Still not working. Going to go to Verizon and sweeten up with a rep. Thanks for the help.
Do you have the Droid X drivers installed? Did you run as administrator?
mob87 said:
Do you have the Droid X drivers installed? Did you run as administrator?
Click to expand...
Click to collapse
Yes and yes.
My battery ran out last night so I'm having a co-worker charge it up for me. I'm going to try one last time when I get off work today and then head over to Verizon.
im having a simiar issue but rsd lite 4.8 wont even recognize my device and i sweaer ive got the drivers but im unable to find them or a guide to make sure i even installed them correctly, could i get pointed to where they are please
Download the driver from here, not the charging one but the other one, unzip and install.
http://www.motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD
mob87 said:
Download the driver from here, not the charging one but the other one, unzip and install.
http://www.motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD
Click to expand...
Click to collapse
That is what I've installed and still no luck.
I think it's working. All looks to be in good order. Flashing at the moment
tgadd said:
I think it's working. All looks to be in good order. Flashing at the moment
Click to expand...
Click to collapse
I found out that error 0x7029 usually related that the .sbf file is not in the C:\ root folder. So I moved it there.
Then I couldn't hit "start" after selecting the .sbf file because "start" was greyed out. I found a post here explaining how to fix it.
Follow his steps completely and it'll solve this problem.
Give RSD a little time to see your phone too. The first time I ran it, I had to wait about a minute until it populated, now it comes right up. I had a terrible time getting it to work though... Just keep tryin'!
Anything YOU do to YOUR phone is not my fault, please proceed with caution
To apply:1. Download RSD Lite, Drivers, and .sbf files from below
2. Install RSD Lite
3. Open RSD Lite as administer (hold shift, right-click on RSD Lite, select Run as administer)
4. Unzip the .gz and extract the .sbf
5. In RSD Lite, browse for the .sbf and select it.
6. Power your phone into the bootloader (hold volume up and power on, should be a black screen with white text)
[If the bootloader screen says Cannot program, your battery is too low to apply .sbf]
7. Plug phone in and run the driver installer
8. RSD should recognize your phone now
9. Select you phone and press Start
10. Wait for it to finish
Whatever you do, do not unplug your phone from computer or disconnect them in any way
Note: If you bootloop and are stuck at the red M logo, you need to wipe data in stock recovery. To do that, hold the volume down button and continue holding it when you power up the phone. Then, once you see the triangle and android, press both volume buttons at the same time. After that, scroll down and select wipe data/factory reset.
Downloads:
2.2.1 SBF: http://www.multiupload.com/6J4DXMTP8Q
RSDLite v5.0: http://www.multiupload.com/I948480VBT
Motorola Driver Installer: http://www.multiupload.com/NWCE2ZXPMF
Root 2.2.1 with SuperOneClick (with psneuter or Gingerbreak) and enable non-market apps:
http://forum.xda-developers.com/showthread.php?t=803682
jorgonv said:
Found this by searching Motorola bravo 2.2 sbf on google:
[can't post links, sorry]
htt p://modmymobile.com/forums/629-motorola-bravo-general/561492-stock-sbf-file-bravo.html
Don't know if this is legit and wanted to see what others think
Click to expand...
Click to collapse
OMG! I use to be on modmymobile, but gave up on it. This is LEGENDARY!!
A 2.2 SBF!! You found it. You didn't give up on modmymobile. Great job.
BravoMotorola said:
OMG! I use to be on modmymobile, but gave up on it. This is LEGENDARY!!
A 2.2 SBF!! You found it. You didn't give up on modmymobile. Great job.
Click to expand...
Click to collapse
thank daywalker from modmymobile
is there any way to check if this is legit?
jorgonv said:
thank daywalker from modmymobile
is there any way to check if this is legit?
Click to expand...
Click to collapse
Flash it to your phone. Be the guinea pig
BravoMotorola said:
Flash it to your phone. Be the guinea pig
Click to expand...
Click to collapse
Is that the only way?
No worries, dont wreck your phone people. I have a perfect brick to test this on.
If it works I will have my recovery done this weekend. This is what I have been waiting for.
This had better work!
Just talked with bandroidx, he says it works.
Yep SBF is as good as gold. Fixed my brick, is latest 2.2 and had the code group i needed. Woot!
what do I do with the p4_kobe_umts_kobe_user_3.4.2-125_KOB_FFW-4_product-keys-ATT-US_ATT-signed.sbf.gz file?
laughsatyou said:
what do I do with the p4_kobe_umts_kobe_user_3.4.2-125_KOB_FFW-4_product-keys-ATT-US_ATT-signed.sbf.gz file?
Click to expand...
Click to collapse
Unzip th .gz file. The .sbf will be in there, if you dont know where to go from there, search how to apply an sbf
jorgonv said:
Unzip th .gz file. The .sbf will be in there, if you dont know where to go from there, search how to apply an sbf
Click to expand...
Click to collapse
yea, im installing it with rsd lite, seems to have worked. *crosses fingers*
woo, thx guys.
i have rsd lite and the sbf file but im completley new to this.so i just plug in my phone leave it on and apply the file? or do i put it in a bootloader? if so how?
Couldn't Update So I Used A Stock Froyo SBF and RSDLite 4.8
My Bravo was rooted. So, every time I tried to update it, I got the triangle/exclamation mark thing. There was probably a way around that, but I don't know enough about hacking phones.
Instead, I flashed (at least I think that it was a case of flashing some sort of ROM... I really don't know) a stock version of Android 2.2.1 onto my Bravo, and it worked like a charm.
Now I need to go about figuring out how to root it again, but that's a headache for another day...
I tried to post the link to the SBF download, but this forum wouldn't let me. So, you'll have to find it on your own.
ThaFrankinator said:
i have rsd lite and the sbf file but im completley new to this.so i just plug in my phone leave it on and apply the file? or do i put it in a bootloader? if so how?
Click to expand...
Click to collapse
Look on Youtube for this video "Flashing SPRecovery SBF File to a Motorola Droid."
I just used those instructions to install a stock Froyo SBF on my Bravo using RSD-Lite. Of course, when dude in the video says to press up on some button on the keypad, you will press up on the volume rocker instead.
I would post the link, but this thing won't allow it.
Wow, I'll never post here again... this farkakte board made me wait 5 freaking minutes to correct a typo in my post (not to make a new post, but merely to edit this one.) Unbe-freaking-lievable!
psterrett said:
Now I need to go about figuring out how to root it again, but that's a headache for another day...
I tried to post the link to the SBF download, but this forum wouldn't let me. So, you'll have to find it on your own.
Click to expand...
Click to collapse
SuperOneClick to root it. http://forum.xda-developers.com/showthread.php?t=803682 Download, follow instructions, pretty easy stuff, makes rooting much easier, worked for me on 2.2. Use psneuter option.
Also, there's a link at the beginning of this thread for the SBF, shouldn't be too hard to find it...
psterrett said:
Wow, I'll never post here again... this farkakte board made me wait 5 freaking minutes to correct a typo in my post (not to make a new post, but merely to edit this one.) Unbe-freaking-lievable!
Click to expand...
Click to collapse
It's because you're a new user, chill man.
jorgonv said:
Unzip th .gz file. The .sbf will be in there, if you dont know where to go from there, search how to apply an sbf
Click to expand...
Click to collapse
And if that doesn't work, what should I do?
GeNiO426 said:
And if that doesn't work, what should I do?
Click to expand...
Click to collapse
It should work if you correctly followed all the steps to apply the SBF.
Did you encounter a problem?
jorgonv said:
It should work if you correctly followed all the steps to apply the SBF.
Did you encounter a problem?
Click to expand...
Click to collapse
Yes, and I did follow all of the steps as they were written. I've been encountering the same problem ever since I received the message that there was an update available.
It keeps saying "E:Can't open /cache/recovery/command" whenever I try to run the installation (for the update).
For the RSD Lite program, I keep getting this error: "Failed flashing process. Failed flashing process. Unable to retrieve initialization values from INI file. (0x7029); phone connected"
I have no idea what's wrong. I've tried every solution posted on this board as well as Motorola's site, AT&T's site, and countless hours spent searching Google for an answer/solution.
GeNiO426 said:
Yes, and I did follow all of the steps as they were written. I've been encountering the same problem ever since I received the message that there was an update available.
It keeps saying "E:Can't open /cache/recovery/command" whenever I try to run the installation (for the update).
For the RSD Lite program, I keep getting this error: "Failed flashing process. Failed flashing process. Unable to retrieve initialization values from INI file. (0x7029); phone connected"
I have no idea what's wrong. I've tried every solution posted on this board as well as Motorola's site, AT&T's site, and countless hours spent searching Google for an answer/solution.
Click to expand...
Click to collapse
When you go into recovery mode and select install: update.zip, is "E:Can't open /cache/recovery/command" the only error that shows up?
jorgonv said:
When you go into recovery mode and select install: update.zip, is "E:Can't open /cache/recovery/command" the only error that shows up?
Click to expand...
Click to collapse
Well, that's the first error to show up before I select "apply sdcard:update.zip"
After I select that, this is exactly what comes up:
-- Install from sdcard...
..Finding update package...
Opening update package...
Verifying update package...
E:failed to read footer from /sdcard/update.zip
(Is a directory)
E:signature verification failed
Installation aborted.
That's exactly everything that comes up when I select "apply sdcard:update.zip" at the Android system recovery <2e> screen.