Related
Hey all, upgraded to Fission 1.2 from 1.1. All was going well until the reboot. I have read over the other threads about similar issues, but none really described the process to get unstuck. Please any help would be appreciated.
craigw79 said:
Hey all, upgraded to Fission 1.2 from 1.1. All was going well until the reboot. I have read over the other threads about similar issues, but none really described the process to get unstuck. Please any help would be appreciated.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=770224
SBF back to stock and start all over. Instructions in attached link.
Ok, so I can get into bootloader and using RSD Lite can load a sbf file; however, I get critical error on the phone and RSD says error sending RAM download for bootloader. Is there a specific sbf file I should be using?
And using the rootzwiki sbf file, I get the error in RSD saying "error sending JUMP comand"
http://forum.xda-developers.com/showthread.php?t=804088
I just had the same problem and the .sbf in that post worked perfectly. Follow the link in the Step 1.
Thank you very much!!! I tried the RSD Lite program multiple times, but this really was the key. Everything is up and running again, thanks again!!!
I think the title kinda explains for itself!
From what I started and where I got?
Well, firstly, I tried to install 3.4.3-11 Motorola SBF with fixed Blur provided this link:
"Here you are, buddy
Fixed.SBF plus Nandroid of 3.4.3-11
http://www.multiupload.com/PB10JC9NQV"
(http://forum.xda-developers.com/showthread.php?t=966537&page=7)
I moved to the older PC still running Windows XP to manage RSD Lite 4.9 to work and recognize my Defy. (it apparently worked)
After wiping all data and cache, I started the phone in boot loader mode and tried to use RSD to load the SBF.
Everything seemed to be fine. But.....After RSD finished the update, it said for me to "turn on my Device". Well, it was already on and stuck at Motorola Logo.
I waited for quite some time, took a shower, smoke a cigar.... And, when I came back, nothing, phone was still on moto logo.
I force restarted the phone removing the battery. Still got stuck at moto logo for quite some time.
Sooooo, I decided to wipe everything again and try to install the SBF again, this time with the one provided by "Pays Rom" thread.
That was when stuff got bad.
After that, I got stuck at Bootloader with a "error code" indication.
Alright, it was time to read some more cause I realized I fked something up! Then, I find out I could load a Devtree SBF and that would unbrick the phone being able to install another SBF.
No succecs, eventhoug I tried to load those previous SBF, I still got problems either with RSD Lite or got stuck at bootloader with a that "error code" problem.
As I didnt know what else to do, I loadead back the devtree and got that different error code on the phone. (one mentioned on the thread title).
And, this is pretty much my whole problem! lol
Any Ideas what should I do?
My Defy is from Brazil - Claro and was running 2.1 android at the beggining!
Tyvm!
it seems like we get the similar Err,my defy also stuck at bootloader Err,my Err code is a5 69 35 00 27,if you have solved the problem,please tell me something about it.
oct307 said:
it seems like we get the similar Err,my defy also stuck at bootloader Err,my Err code is a5 69 35 00 27,if you have solved the problem,please tell me something about it.
Click to expand...
Click to collapse
Nothing yet.
Still trying to boot anything in it. If I ever find something, I'll let you know!
I'm getting this error now on RSD Lite when trying to load the SBF 3.4.3-11
Failed Flashing process. Phone[0000]: Error flashing subscriber unit. Device API Error: 0xE003003F Adress: 0xB2383000 Command: ADDR (0xE023203F), phone conected
New error code prompted on Bootloarder:
Err:A5,70,39,00,27
Now it shows Motorola logo for a few seccconds.
Stuck at code 39 or smthing while trying to install another SBF (the one with PAys Rom)
Ok, it unstucked, now RSD shows "restarting" and the motorola logo is on screen.
Finally, it loaded.
I used Pays Rom after a few tries with the first fixed SBF and jumping to the Pays Rom SBF.
After sometime, it installed!!!!!
The phone just started!!!!!
How about your problem mate, wich point are u at?
To solve both of your problems:
download and install the original 3.4.3-11 sbf, no nandroid or anything else.
You should allways be able to get into the original motorola boot loader and from there install any of their SBF, but some of the sbf versions with android do not allow downgrader, therefore you should be sure to use the same version and not a lower one.
pomah said:
To solve both of your problems:
download and install the original 3.4.3-11 sbf, no nandroid or anything else.
You should allways be able to get into the original motorola boot loader and from there install any of their SBF, but some of the sbf versions with android do not allow downgrader, therefore you should be sure to use the same version and not a lower one.
Click to expand...
Click to collapse
Thank you!
I managed to find that out by myself, but thanks for the help!!
I noticed it was a not downgradable version, but I don't really care as it fits what I was aiming and I don't have any intetions of going back to 2.1!
pomah said:
To solve both of your problems:
download and install the original 3.4.3-11 sbf, no nandroid or anything else.
You should allways be able to get into the original motorola boot loader and from there install any of their SBF, but some of the sbf versions with android do not allow downgrader, therefore you should be sure to use the same version and not a lower one.
Click to expand...
Click to collapse
thank you very much!
i have used 3.4.3_11-Stock._BLUR.sbf,but it doesn't work!it's still be stuck at bootloader 09.10 Err:a5,69,35,00,27.
i don't know what's the meaning of the errcode
hello,
I also have a similar problem, stuck on the bootloader but I have the "low battery cannot program" error. When I try to charge the battery, the battery appears with a "?" inside...
Does anyone already get this problem ? Battery out of order ? software problem ?
Use the macgyver method with usb cables. Search the forum and be brave. I had the same problem
Sent from my MB525 using Tapatalk
lanfearxt said:
Use the macgyver method with usb cables. Search the forum and be brave. I had the same problem
Sent from my MB525 using Tapatalk
Click to expand...
Click to collapse
this is the post: http://forum.xda-developers.com/showthread.php?t=892026&highlight=battery+charge
thanks for the link
it will help me saving my defy....
oct307 said:
thank you very much!
i have used 3.4.3_11-Stock._BLUR.sbf,but it doesn't work!it's still be stuck at bootloader 09.10 Err:a5,69,35,00,27.
i don't know what's the meaning of the errcode
Click to expand...
Click to collapse
I'm having this same problem.. anyone successfully fixed this?
try this
try apply this Full SBF 2.3 orange http://forum.xda-developers.com/showthread.php?t=1106375
or
2.1 SBF http://and-developers.com/sbf:defy
this is is a sign error in someone codegroup.
slayps said:
try apply this Full SBF 2.3 orange http://forum.xda-developers.com/showthread.php?t=1106375
or
2.1 SBF http://and-developers.com/sbf:defy
this is is a sign error in someone codegroup.
Click to expand...
Click to collapse
I tried a 2.1 SBF and it gave me a black screen.. the phone turns on, but keeps black.. so I re-flashed with a 2.2 sbf and got back to the same error..
Now I'm downloading the Orange 2.3 sbf file.. I dunno if it will work because I already tried 8 different sbf files
renatojf said:
I tried a 2.1 SBF and it gave me a black screen.. the phone turns on, but keeps black.. so I re-flashed with a 2.2 sbf and got back to the same error..
Now I'm downloading the Orange 2.3 sbf file.. I dunno if it will work because I already tried 8 different sbf files
Click to expand...
Click to collapse
I'm having this same problem.. anyone successfully fixed this?
neozhu said:
I'm having this same problem.. anyone successfully fixed this?
Click to expand...
Click to collapse
1) Try flashing on different PC to start fresh.
2) If you'd flashed so many sbf. You might not be able to remember them all. My guess is that you might be at froyo state(corrupted/failed system code), thus flashing another Eclair 2.1 sbf would not solve your issue. You must try on Froyo sbf only starting from bootloader mode and rsdlite 4.9 or 5.0.
3) Take note of your battery level as it might draining down while you attempting to put some resuraction on the device.
4) Try relax and take a bath and smoke a bigger cigar just like the OP of this thread did...
i too have this same problem, exept i dont know what ver i had and i flashed so many sbf. ive found some sbf that work but i get no signal.
JDM-Bb said:
i too have this same problem, exept i dont know what ver i had and i flashed so many sbf. ive found some sbf that work but i get no signal.
Click to expand...
Click to collapse
no signal..? have you try baseband switcher application..?
yes ive try that with no luck.
hELLO
Please, tell me how to solve that problem with bootloader error A5, 70, 39,00 27 in my defy?? You have said you solved it. please help
you need to be calm and cool with lot of patience. It takes upto 10 - 15 Minutes...
the flashing happens at the speed of your computer.
try to use original cables and use USB ports of your desktop motherboard or laptop without any extension cables.
keep your pc in NO SLEEP mode. Batter should be almost full before flashing ...these are some tips...
Hey guys,
During installing some ROM on my defy , it got messed up...
I used RSD lite to flash my defy completely , but It'll execute till 100% then there will be some error in " verifying checksums" and later it just FAILS.
I've tried the following
*flashing different ROMS (ard 10)
* using the latest RSD (5.6)
*charging my battery completely
*storing the sbf in C:
* using the RSD lite in admin mode
*also sometimes it does not even create that "flash error log"
I really dunno guys/.... please help... is my defy bricked??
You have installed a rom of your country? Where it was made the phone?
I'm pretty sure RSD Lite is for flashing SBF files, not ROMs.
@defy_jay
Which SBF have you flashed?
Try to flash SBFs from http://sbf.droid-developers.org/umts_jordan/list.php.
If you have a defy+ use this link:
http://sbf.droid-developers.org/umts_jordanplus/list.php
Is your cable eventually weak?
Have you made a Factoryreset before flashing with RSD-Lite?
Have you renamed the SBF in short name, like ABC.SBF?
trying now...
@ RATTAR
Which SBF have you flashed?
**-- i'm flashing all kinds of sbf online but eventually gets stuck at 100 % ..
Try to flash SBFs from (some url)
If you have a defy+ use this link:
**-- I have a defy but it's updatd to a 2.6.9 kernel.. so i'm trying SBFs from both the links you've pasted
Is your cable eventually weak?
**-- i doubt the cable is weak cause its reading when i connect and its also flashing till the 100 %
Have you made a Factoryreset before flashing with RSD-Lite?
Have you renamed the SBF in short name, like ABC.SBF?
**-- yeah tried the short name thing...
..
@Glaux
sorry that was a mistake..i'm flashing SBFs only...
@kroix10
does it matter which country's sbf you install ??
i'm installing what ever i get.. but it's an Indian make so i'm flashing "Retail Asia" or should i flash anything specific ??
I have b
een trying for 3 days now to get a MB525 working. I have read hundreds of posts and followed tutorials with no luck
Please can someone help?
Phone powers on to animated moto blur logo, then repeats this 3 times but much faster. It then shows a t-mobile logo for about 15 seconds before going dark, then rebooting and looping.
I have tried wipe/reset from menu.
I have tried flashing 6 different sbf using RSD Lite v5.6 but flash files towards end with verifying checksum errors
RSD Lite doesnt display any details when i click show device, but under the 'model' heading below, it shows S Flash OMAP3630
What am I doing wrong? Please help.
Thanks.
MK5.ESCORT said:
I have b
een trying for 3 days now to get a MB525 working. I have read hundreds of posts and followed tutorials with no luck
Please can someone help?
Phone powers on to animated moto blur logo, then repeats this 3 times but much faster. It then shows a t-mobile logo for about 15 seconds before going dark, then rebooting and looping.
I have tried wipe/reset from menu.
I have tried flashing 6 different sbf using RSD Lite v5.6 but flash files towards end with verifying checksum errors
RSD Lite doesnt display any details when i click show device, but under the 'model' heading below, it shows S Flash OMAP3630
What am I doing wrong? Please help.
Thanks.
Click to expand...
Click to collapse
Is your defy RED or GREEN? Try to flash correct SBF
If you wiped data from stock recovery after an sbf flash then you should not get boot loops. Try the ti omap blank flash option. If problem persists even after FULL sbf flash and above instructions then it looks to be a hardware issue
Sent from my MB526 using xda premium
Which sbf file did you flashed? Looks like you have a branded one. If you flashed the wrong sbf, it could cause this problem.
Sent from my HTC One X using xda premium
Please ask all questions in Q&A. Thread moved there.
First of all please find out what exact firmware you had before flash. Try to find exact same SBF from http://sbf.droid-developers.org/umts_jordan/list.php. If you moved up with roms then you can not go down any more as original SBF flashing will prevent it. Make sure you are flashing Defy and not Defy+ SBF's.
I experienced the same issue. My experience says that I could have bootloop from the same verions of ROM just for different region. In my case i was flashing 3.4.2 and although my phone was originally from blurred DACH then best result was always nonblur Nordic. Otherwise I ended ususally with bootloop.
Please answer all the questions below, so anyone who is willing to help can understand what exactly is going on:
* What region does your Defy belong to?
* Was it branded? What brand?
* Was it carrier locked?
* What firmware did you have before flashing?
* What SBF's you have been flashing without success?
* Did you have phone rooted before you did install SBF? If yes with what?
* Did you do factory/cache reset after SBF flashing?
Thanks guys (and gals?) for all your replies so far.
OK unfortunately I dont know the previous firmware etc. The phone was given to me by a friend who says they have never tried to flash/mod the phone (but that is unconfirmed)
All i know is that when I got the phone, it was stuck in a bootloop, part of which included a t-mobile splash screen.
SBF i have flashed unsucessfully are......
JRDNEM_U3_3.4.2_177003_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB03A.0R_PDS03C_USAJRDNFRYORTGB_P019_A010_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_179002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_UCAJRDNFRYORTCOREEU_P023_A008_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_1796.1_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8TMGB03A.0R_PDS03C_USAJRDNFRYOTMGB_P023_A011_M003_HWp3_Service1FF.sbf
JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf
JRDNEM_U3_2.21.1_SIGNED_USAJRDNEMARAB1B8TMGB028.0R_USAJORDANTMGB_P030_A012_M001_HWp3_Service1FF.sbf
JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB02C.0R_USAJORDANRTGB_P035_A011_HWp3_Service1FF.sbf
JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_USAJRDNEMARAB1B8TMGB030.0R_USAJORDANTMGB_P039_A015_M003_HWp3_Service1FF.sbf
Basically all t-mobile (uk) branded and uk unbranded roms.
All appear to flash ok, but then fail on verifying checksums.
I have not done factory/cache reset after flashing as the handsets is stuck in download/bootlader mode.
So do you think its case of keep on trying to flash various stock roms until i find one that it likes?
Thanks for all your help so far. Much appreciated
MK5
First try to get into stock recovery (check if possible): power it up while pressing volume down. If exclamation mark + triangle appear then press volume up and down simultaneously and choose wipe data/factory reset
BTW, you mentioned that when you got the phone it was in bootloop - was it somehow explained to you?
corrinti said:
First try to get into stock recovery (check if possible): power it up while pressing volume down. If exclamation mark + triangle appear then press volume up and down simultaneously and choose wipe data/factory reset
BTW, you mentioned that when you got the phone it was in bootloop - was it somehow explained to you?
Click to expand...
Click to collapse
I can get into stock recovery and do factory wipe/reset, but result is the same - bootloop
Should i keep trying different sbf's?
I dont want to kill the phone (obviously)
MK5.ESCORT said:
I can get into stock recovery and do factory wipe/reset, but result is the same - bootloop
Should i keep trying different sbf's?
I dont want to kill the phone (obviously)
Click to expand...
Click to collapse
Seems no other way, but it's not good that you don't know what BL your phone is and whether it's green or red lense.
Try BL5 in a first step - see the OP of this thread with links or try from this thread 'Common Problems/Questions' > Method 2
corrinti said:
Seems no other way, but it's not good that you don't know what BL your phone is and whether it's green or red lense.
Try BL5 in a first step - see the OP of this thread with links or try from this thread 'Common Problems/Questions' > Method 2
Click to expand...
Click to collapse
OK i just tried...
JRDNEM_U3_3.4.2_177-005_NORDIC_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTNORD_P003_A001_HWp3_Service1FF
But it is the same result....
error verifying code group 32 checksums. File: 0x4805 Phone: 0xA8C7
plus others group 33 etc
Phone displays Bootloader 09.10
I think it is red lense
What should i try now?
I'm not 100% sure what your last post meant with regards to "Try BL5 in a first step" ?
Thanks
OK im about tearing my hair out with this phone.
Everything I try ends with same result - bootloop
Who would have thought flashing a phone could be so difficult?
Phone displays Bootloader 09.10
I think it is red lense
Click to expand...
Click to collapse
isn't this BL7 ?... so DFP231 Sbf ?
Sent from my MB526 using xda app-developers app
MK5.ESCORT said:
OK im about tearing my hair out with this phone.
Everything I try ends with same result - bootloop
Who would have thought flashing a phone could be so difficult?
Click to expand...
Click to collapse
It's difficult only when you do not know what is aboard - usually it's not difficult when you know its actual history.
But you didn't what what I proposed. You have flashed again BL4 sbf. Try BL5 or even BL6 (no way back to froyo) like Nordic Retail U3 4.5.1-134_DFP-137 from here
In my previous post I gave you some links to find out what is BLx
@cmadle
No, it doesn't mean it's BL7
Bootloader 09.10 is a standard one, also with Froyo BL4 ROMs
mb525 bayer
My Defy caught boot loop, sbf bl7 does not work. Recovery Motorola does not work, I can not do Wipe. PLEASE HELP
4igi4 said:
My Defy caught boot loop, sbf bl7 does not work. Recovery Motorola does not work, I can not do Wipe. PLEASE HELP
Click to expand...
Click to collapse
Try this thread
But also give there some more details how it happened
My defy suddenly turned off, when turning bootloop. Wgrywałem many SBF on this page but always bootloop i not did turned on stable recovery .I can't do Wipe
corrinti said:
It's difficult only when you do not know what is aboard - usually it's not difficult when you know its actual history.
But you didn't what what I proposed. You have flashed again BL4 sbf. Try BL5 or even BL6 (no way back to froyo) like Nordic Retail U3 4.5.1-134_DFP-137 from here
In my previous post I gave you some links to find out what is BLx
@cmadle
No, it doesn't mean it's BL7
Bootloader 09.10 is a standard one, also with Froyo BL4 ROMs
Click to expand...
Click to collapse
@4igi4 - I hope you get your phone fixed because I know how frustrating it is, but can you start your own thread please? Thanks
@corrinti - Thank You for all your help so far, its appreciated I flashed the file you suggested (Nordic Retail U3 4.5.1-134_DFP-137) but same result. I am a little confused, because the sbf you suggested is in list for defy plus? Isnt defy plus MB526? My phone is MB525. Or does this not matter?
Thanks
MK5
OK I tried 2 more sbf from linkk provided, but still error with verifying checksums
Retail British DFP-125 and DFP-237
Any more ideas please?
Thanks
Info from phone is:
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: v0x000910
DRM Version: N / A
AP Die ID: 1ac000170dc063010000dcff0200
BP Die ID: 0000000000000000000000000000
AP Public ID: 512ac712004d25e05c275c482324c3ded11c6391
BP Public ID: 0000000000000000000000000000000000000000
MK5.ESCORT said:
OK I tried 2 more sbf from linkk provided, but still error with verifying checksums
Retail British DFP-125 and DFP-237
Any more ideas please?
Thanks
Info from phone is:
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: v0x000910
DRM Version: N / A
AP Die ID: 1ac000170dc063010000dcff0200
BP Die ID: 0000000000000000000000000000
AP Public ID: 512ac712004d25e05c275c482324c3ded11c6391
BP Public ID: 0000000000000000000000000000000000000000
Click to expand...
Click to collapse
Again, you didn't read the posts in links provided. If you really flashed DFP-237 then you are BL7 now. Anyway the phone is not screwed but just more work in rooting.
But was it flashed or you received an error during flash? (just hope so)
But there are many posts last days with the same problem - no sbf working and I have no idea how to overcome it. Sorry. Try to post in this thread
The only case I remember was some specific bootloader screen error + RSD error which indicated the hardware problem, (checksum of group 33 AFAIR)
The problem is that i rooted my defy+ from 2.3 to 4.0 and now i have triyed every root prossible and metoth, but no one works, every single time i get an error. I have triyed with RSD lite, every SBF posible, and they all give me a RAM error, but with TBPI-228E-0-7009-A04_Signed.sbf it works every time, i also triyed doing the rom from my SD, and when i try any CM it sayis the file is corrupted. Can anyone help me pls.
Im stuck and cant get to install 4.3 or any other room.
It seems you have the SBF for the wrong defy, see what exactly model you have, it is written under the battery, maybe you have the MB526?
Also to restart the phone and enter the bootloader (just like you did when you did with the RSD lite by pressing volume up and power when the phone is off for some seconds and then letting off) and write what version of the bootloader you have.
There are many bootloader versions and specific SBFs for each out there
http://forum.xda-developers.com/showthread.php?t=966537
write the exact model and the version of the bootloader so that we can guide you...
The model i have is the Motorola XT535 with tinboost+ ICS 01.06
BUMP
nicolasjoshiel said:
The model i have is the Motorola XT535 with tinboost+ ICS 01.06
Click to expand...
Click to collapse
Try this....this site have your SBF checkout
Code:
[URL="http://www.droidevelopers.com/showthread.php?t=13111"]http://www.droidevelopers.com/showthread.php?t=13111[/URL]