Related
Hello,
I'm not an expert at modding and hacking but I can definately follow directions. I used a G1 for about a year and flashed it plenty of times with different roms, radios, and spls. I ended up getting a MyTouch 1.2 and proceeded to try to root it so that I can enjoy CM's great roms.
Followed the directions on the unlockr
Made the gold card and went to flash the sappimg.img from the site. The flash went through fine but the phone just got stuck at the HTC Magic screen. Now I know what my mistake was there. I didn't think it was a big deal and continued with the steps. Mainly because I didn't see any infomation on what to do if it doesn't go through. Flashed the radio, then went to the hboot. Received image update failed error message. Long story short, I experienced what having a brick feels like.
The reason I am explaining all of this is for people to learn from my mistakes and to get some clarification on what I am writing next.
I got the phone exchanged (only had it for a day) and began researching more to find out what I did wrong. I found this crypysmoker's thread.
And then I found the message:
READ READ READ. DO NOT download the SAPPimg.zip file it says on that page.
Get the top fixed SPL file 2010 from here
Click to expand...
Click to collapse
In my research, I discovered that the mytouch 1.2 has several spl's that have been hacked and not. I figured out that the file on theunlockr wasn't the fixed spl and that is mainly the reason for my brick and the frozen HTC Magic screen.
I want to enjoy the gifts that CM has to offer. Being stuck on normal 1.6 is well saddening to say the least. But I am worried about flashing the wrong spl and have the situation repeat again as I would figure I would be screwed this time around and wouldn't be able to get it replaced.
Can anyone provide more information about this? Can I flash the Engineerings SPL v1.33.2010 and not run into the same problem? I understand that there isn't a 100% certainty of working. Most of my searches show that more people have bricked this phone than any other.
Thanks in advance and sorry for the length.
Phone Info:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
Well, I did it all again. Redownloaded all the files. Setup a new goldcard. This time I let it sit for over 45 mins. Never got past the HTC Magic Screen. Adb doesn't see it nor does the light come on to say that it is charging. Which would show me that it has indeed locked up.
Anyways it shut off on its own since it wasn't getting usb power and I guess the battery died. I'm still able to reboot back to hboot. I attempted to reflash the sappimg.zip file. Right now its going on 10 mins sitting on the
[1] SYSTEM - Unzipping
What I will add tho is that my info changed.
SAPPHIRE UNKNOWN 32A ENG S-OFF H
HBOOT-1.33.2010 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
I tried reformatting the SD and recreated the Gold Card as I noticed some of the Hex changed but still getting the same issue.
the phone won't run anything other than spl 1.33.0013 and radio 2.22.23....w/e x)
Get the sappimg you had before and flash it in hboot mode which should give you spl 1.33.0013. In fastboot mode, flash your spl to 1.33.2010again, then flash radio 2.22.23 or w/e, then flash amon ra recovery, then flash stock spl (1.33.0013).
All the files you need are here: http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
The reason it wont boot up is because you have engineering spl and the wrong radio on. Again, it will only boot up with the stock radio and spl~!!!
hacker01 said:
the phone won't run anything other than spl 1.33.0013 and radio 2.22.23....w/e x)
Get the sappimg you had before and flash it in hboot mode which should give you spl 1.33.0013. In fastboot mode, flash your spl to 1.33.2010again, then flash radio 2.22.23 or w/e, then flash amon ra recovery, then flash stock spl (1.33.0013).
All the files you need are here: http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
The reason it wont boot up is because you have engineering spl and the wrong radio on. Again, it will only boot up with the stock radio and spl~!!!
Click to expand...
Click to collapse
I don't know where I would find the original stock sappimg. The one that is on the website is the sappimg that needs to go on when you are stock at the beginning.
Also my HBoot doesn't seem to be unzipping cause that is where it gets stuck. Is there a way to do it all from fastboot? Since I am currently stuck in the 2010 spl, can I flash the stock spl through fastboot without the radio?
I just don't get why I am having this problem. I followed that website to the letter. And I know that at this point if I attempt to flash the radio back to stock, I will completely brick it.
Since you dont want to flash the radio, flash the amon ra recovery FIRST. Then flash the stock spl. If it doesn't boot up, then you'll need to get the engineering spl back on again and flash stock radio (the one in the link).
hacker01 said:
Since you dont want to flash the radio, flash the amon ra recovery FIRST. Then flash the stock spl. If it doesn't boot up, then you'll need to get the engineering spl back on again and flash stock radio (the one in the link).
Click to expand...
Click to collapse
I couldn't flash the recovery in fastboot.
Tried Fastboot boot recovery recovery.img
Got an error message Recovery not found.
Wasn't sure if I wanted to try flashing the recovery before finding out if it can brick it. Like the original post says, my first MT1.2 I flash the spl from unlockr screen locked up but could get into fastboot so flashed the radio and then tried the spl like the directions say and I completely bricked it.
I don't want to make the same mistake twice.
Unfortunately, there's a chance of bricking every time you flash anything.
Anyways, this might be redundant but is the recovery imaged named recovery.img? Like you actually renamed it? If not, you'll have to type out the exact name.
hacker01 said:
Unfortunately, there's a chance of bricking every time you flash anything.
Anyways, this might be redundant but is the recovery imaged named recovery.img? Like you actually renamed it? If not, you'll have to type out the exact name.
Click to expand...
Click to collapse
No it wasn't named recovery.img, was just using it to save time. I did spell out the recovery's full name.
When you enter the command "fastboot devices" it shows a serial number right? And the recovery image is in your tools folder of your androidsdk folder?
Sorry for the redundant questions, we're just going back to the basics really quick right now.
hacker01 said:
When you enter the command "fastboot devices" it shows a serial number right? And the recovery image is in your tools folder of your androidsdk folder?
Sorry for the redundant questions, we're just going back to the basics really quick right now.
Click to expand...
Click to collapse
yup and yup
I see the problem. Your mobo is recognized as 32a S off H. You're recovery image is probably the G version. What you could do is download the H version and flash it although i doubt your phone will still boot up at that point.
You could try flashing the H version of amon ra's recovery image and afterwards, see if it boots up. Then, if it doesnt boot up, flash stock spl (1.33.0013) and see if it boots up.
I'm pretty sure your phone will end up not booting up and you'll eventually have to flash stock radio as well and then flash the G version recovery back on.
The reason your mobo is recognized as the H version and not the G version is because of the radio.
EDIT: I just realized I made a mistake. I meant to say the mobo is recognized as the H version because of the SPL, not the radio.
EpikFail said:
I couldn't flash the recovery in fastboot.
Tried Fastboot boot recovery recovery.img
Got an error message Recovery not found.
Wasn't sure if I wanted to try flashing the recovery before finding out if it can brick it. Like the original post says, my first MT1.2 I flash the spl from unlockr screen locked up but could get into fastboot so flashed the radio and then tried the spl like the directions say and I completely bricked it.
I don't want to make the same mistake twice.
Click to expand...
Click to collapse
Heres your problem. If recovery is not found then you didnt put it in your Androidsdk\tools folder did you? or did you rename it? Oooorr, you put it in there while adb was running and didnt restart it to see the file itself
crypysmoker said:
Heres your problem. If recovery is not found then you didnt put it in your Androidsdk\tools folder did you? or did you rename it? Oooorr, you put it in there while adb was running and didnt restart it to see the file itself
Click to expand...
Click to collapse
He already said that its in the tools folder.
hacker01 said:
I see the problem. Your mobo is recognized as 32a S off H. You're recovery image is probably the G version. What you could do is download the H version and flash it although i doubt your phone will still boot up at that point.
You could try flashing the H version of amon ra's recovery image and afterwards, see if it boots up. Then, if it doesnt boot up, flash stock spl (1.33.0013) and see if it boots up.
I'm pretty sure your phone will end up not booting up and you'll eventually have to flash stock radio as well and then flash the G version recovery back on.
The reason your mobo is recognized as the H version and not the G version is because of the radio.
Click to expand...
Click to collapse
Sorry for the last reply, I do all my hacking at work so my adb setup is there. So I did this.
fastboot devices
XXXXXXXXX fastboot
fastboot boot recovery recovery-RA-sapphire-c1.6.2G.img
cannot load 'recovery'
fastboot flash recovery recovery-RA-sapphire-c1.6.2G.img
send OKAY
write OKAY
Click to expand...
Click to collapse
Holding home+power, wouldn't boot into recovery. Seems to still be stuck. Went back to fastboot
fastboot flash hboot hboot.nb0
send OKAY
write OKAY
Click to expand...
Click to collapse
Still same thing so back to fastboot I go
fastboot radio radio.img
sending 'radio' <21504 KB>... FAILED <remote: not allowed>
Click to expand...
Click to collapse
My phone now reads
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
I can tell that the radio is still the old one. It seems the spl worked and put it back to stock but still no recovery and I guess I can't fastboot anything either.
So I assume I need to flash back eng spl and see if it will boot, right?
Even as the recovery and spl are compatible, you see that it still won't boot up. What you gotta do now is flash the engineering spl and do the same as before except flash the radio as well.
In the end, your mytouch should read:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
The same as stock before EXCEPT this time, you'll have amon ra's recovery. That's when you know you're done. Just follow the guide from before and you'll be fine.
hacker01 said:
Even as the recovery and spl are compatible, you see that it still won't boot up. What you gotta do now is flash the engineering spl and do the same as before except flash the radio as well.
In the end, your mytouch should read:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
The same as stock before EXCEPT this time, you'll have amon ra's recovery. That's when you know you're done. Just follow the guide from before and you'll be fine.
Click to expand...
Click to collapse
So I flashed the eng spl again. Still wouldn't boot. Got the same SAPPHIRE UNKNOWN 32A ENG S-OFF H
did:
fastboot flash recovery recovery-RA-sapphire-v1.6.2G.img
send OKAY
write OKAY
fastboot boot recovery
cannot load 'recovery'
Click to expand...
Click to collapse
I'm still worried about flashing the radio....
but I should fastboot the radio and then the hboot.nb0, right?
Solved
I would like to start out by saying, Thank you so much hacker01 for your help! You don't know how much I appreciate everything.
I was able to get it back working and fully running CM5.0.7
After I reloaded the eng spl, like I said, I was running into the same problems. Wouldn't boot, goes into fastboot, etc.
I grabbed the stock radio and spl NOT from the unlockr page this time but from the link on crypysmoker's thread.
fastboot flash radio radio.img
fastboot flash hboot hboot_7201A_1.33.0013G_091021.nbo
fastboot flash recovery recovery-RA-sapphire-v1.5.2G.img
fastboot reboot-bootloader
Click to expand...
Click to collapse
Just like it said and sure enough got into recovery! Flashed a rom and it booted up.
I know this technically isn't solved cause I really don't know what went wrong in the first place. I can ensure you that I can follow directions and did. The only thing that makes any sense is the files on theunlockr's website is bad. Guess we can just chalk it up to bad luck.
But if anyone wants to root their mytouch 1.2, crypysmoker's thread is definitely the way to go.
Thank you again hacker01! I hope I can pay it forward.
You did it right, it's just that any radio that is not 2.22.23 won't work with the mt3g 1.2/Fender LE right now. And no problem! Glad you got it up and running. Enjoy your mytouch
Mod. edit: not dev related, moved to general
Please, help!
I have the exact same problem: I was following the Unlockr's instructions, made the goldcard, flashed the sappimg without getting any errors, and now the phone is stuck on the htc magic boot screen. I am not experienced and now I am scared sh**less, because the phone belongs to my girlfriend Please, give me step-by-step instructions how to fix it, because I really dont want to improvise. The phone is MyTouch 1.2...
Thank you in advance!!!
SAPPHIRE UNKNOWN 32A ENG S-OFF H
HBOOT-1.33.2010 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
Hi all,
I've been trying to install the amon RA recovery rom on mg gf's magic, but I'm stuck in a loop.
I've got a non perfect SPL loaded which boots into cupcake
Sapphire PVT 32B Ship S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-10
RADIO-3.22.20.17
However when I try to run fastboot boot recovery.img it restarts and gets stuck on the splash screen.
I've re-made the sd card to be a gold card and I've still got the issue.
I've also tried running fastboot flash recovery recovery.img
and I get Infosignature checking... FAILED )remote : signature verify fail).
Can anyone help me sort this?
Many thanks
will
You're using a non-engineering SPL, so all fastboot commands will fail. 1.33.2005 has fastboot enabled and you should be able to flash it from your currect state, however I was on .26i radio when I flashed it so I don't know for certain.
EDIT: Since you're on cupcake you should be able to use flashrec to flash the recovery image, so not engineering SPL required!
Hi Adrian,
thanks so much for replying.
In the meantime I've tried another sappimg and this has taken me to 1.33.2010 which has let me fastboot flash recovery... but when I try to boot into recovery (hold home and restart) all i get is the htc magic spash screen
The other issue is that the rom ive now got is lacking the google tools and therefore market, so i cant get flashrec
Any thoughts?
thx
No problem about missing the market, do "adb install *Drag FlashRec APK here*", that will get it installed.
How long did you hold down home+power to get to recovery? The first time I did it after loading up Amon Ra's 1.7.0 it took me holding them for around 1.5-2 minutes before it finally booted in.
Hiya,
I waited about 5 mins or so
I've now got flashrec installed... looking for what to do next?
Here. Start at step 12 assuming you've already got a recovery image.
Hmm, just tried that and it flashes in an instant (too quick tbh!), so im wondering if this is because its already got the recovery on it from when i did it via fastboot
After restarting and holding home im still getting just the splash screen
Is there a way to view what is on the /recovery/ partition, or is there a reason its not wanting to boot into it?
thx
Which recovery image are you using?
billytkid said:
Hmm, just tried that and it flashes in an instant (too quick tbh!), so im wondering if this is because its already got the recovery on it from when i did it via fastboot
After restarting and holding home im still getting just the splash screen
Is there a way to view what is on the /recovery/ partition, or is there a reason its not wanting to boot into it?
thx
Click to expand...
Click to collapse
try
fastboot erase recovery, then reflash recovery
AdrianK said:
try
fastboot erase recovery, then reflash recovery
Click to expand...
Click to collapse
He can't complete any fastboot commands since he doesn't have an engineering SPL.
DonJuan692006 said:
He can't complete any fastboot commands since he doesn't have an engineering SPL.
Click to expand...
Click to collapse
I did tell him how to get one ;-P
Hopefully it won't come to that. I think he's loading the wrong recovery image.
recovery-RA-sapphire-v1.7.0G.img
Try re-downloading the recovery image from here and try flashing again. If it doesn't work I think your going to have to try going Adrian's route.
Better yet, you can get it from step 5 here for a quicker download.
Also, when you were in FlashRec running the "/sdcard/recovery-RA-dream-v1.2.3.img" command did you change recovery-RA-dream-v1.2.3.img to match the filename of your recovery image?
I've just managed to update the recovery, but strangely this is using the 32A recovery.. and not 32B.. but I've got a vodafone Magic
So I can now get into recovery and have followed the steps or dangerSPL, followed by cyanogen mod + gapps, but not i cant get it to fully start up and im stuck on splash screen
V confused now.. just checked in hboot and its still showing sapphire pvt 32b eng s-off H
Hboot 1.76.2007
radio 3.22.20.17
looks like the gf's not having a mobile tomorow.. oh dear im in trouble!
any ideas again much appreciated!
thx
Can you run any fastboot commands?
Yes I can now run fastboot commands and use the recovery tool
thx
Hi all,
hope to get some more help, sorry!!
After looking more into this it seems that one of the previous images i put on the 32b phone was a 32a radio... hence the issue with putting on the recovery image for the 32b not working.
So... i downloaded myTouch-radio-2_22_23_02.zip and using the recovery did an update from zip.. now however the phone boots and all i get is a picture of a box with an arrow pointing to an android robot (see attached!)
At this rate its looking like i need to buy a new phone!
cheers all
So i had to fix the SPL on the mytouch because i kept getting the Fastboot Remote Not allow, So i did the SPL Fix and rebooted and i had a black HTC Magic screen, Got some progress then it said to throw a rom on there but i couldnt get to recovery, i try to flash a recovery and i get remote signature verify fail. So i tried flashing the SAPPIMG again and it is stuck on unzipping, Rebooted again and tried to flashboot boot recovery.img it transfers the recovery and reboots and stuck ad the black htc magic screen again.
Well i made some progress i can flash recovery and stuff now but it wont boot to recovery, i got the recovery to flash successfull but for some reason when i hold home and power it sits at the magic screen
As of right now i have
SApphire PVT 32a eng s-off h
hboot-1.76.2007
cpld-13
radio-6.35.10.18
Well i think ive done everything to this phone............ would be nice to figure somthing out. Been working on it since about 10AM this morning and i got nothing, does anyone have a fix?!
Any help would be appreciated!! Thanks Guys!!
Its bricked. The mytouch 1.2 can only run 1.33.0013 spl and the 2..x radio. Its a hybrid hardware. 32a board with a 32b radio.
NetrixTardis said:
Its bricked. The mytouch 1.2 can only run 1.33.0013 spl and the 2..x radio. Its a hybrid hardware. 32a board with a 32b radio.
Click to expand...
Click to collapse
I can flash a new radio on it and a new SPL on it, it takes that when i flash it
To root the phone you need to use the ENG spl 2010 flash your custom recovery, then stock radio and spl. After that, flash ROMs thru recovery. You can not use any other radio/spl at this time.
NetrixTardis said:
To root the phone you need to use the ENG spl 2010 flash your custom recovery, then stock radio and spl. After that, flash ROMs thru recovery. You can not use any other radio/spl at this time.
Click to expand...
Click to collapse
I think i bricked it now..... it stuck on a 0009 SPL and i cannot do a sappimg it wont unzip and i cannot flash a different spl it does the signature verify fail
Does your phone have the 3.5mm jack? Are you sure you've got a 1.2?
Well, If your phone still turns on and your have a working goldcard, try the ENG 2010 SPL from the Magic SPL thread. once you are back down to 1.33.2010 SPL and 3.22.x radio, fastboot your custom recovery, flash stock mytouch 1.2 radio then spl.
At that point, you won't have any OS tho. so, go into recovery, wipe all (but NOT your SD goldcard). Then flash custom ROM+gapps (if needed)
What is your fastboot info RIGHT NOW....
Remember that if you have a MyTouch 1.2 (with 3.5mm headphone jack) you MUST have the following AFTER you flash your custom recovery.
Radio: 2.22.23.02
SPL: 1.33.0013
So use the engineering SPL (2010) and 'fastboot flash recovery recovery.img' with a Amon_Ra 1.7.0G or Clockwork Recovery for MyTouch devices (NOT MAGIC).
Afterwards reboot to your recovery by holding HOME while booting. If you can boot into recovery then flash your stock spl (1.33.0013) back. Then flash your rom.
supercobaltss said:
So i had to fix the SPL on the mytouch because i kept getting the Fastboot Remote Not allow, So i did the SPL Fix and rebooted and i had a black HTC Magic screen, Got some progress then it said to throw a rom on there but i couldnt get to recovery, i try to flash a recovery and i get remote signature verify fail. So i tried flashing the SAPPIMG again and it is stuck on unzipping, Rebooted again and tried to flashboot boot recovery.img it transfers the recovery and reboots and stuck ad the black htc magic screen again.
Well i made some progress i can flash recovery and stuff now but it wont boot to recovery, i got the recovery to flash successfull but for some reason when i hold home and power it sits at the magic screen
As of right now i have
SApphire PVT 32a eng s-off h
hboot-1.76.2007
cpld-13
radio-6.35.10.18
Well i think ive done everything to this phone............ would be nice to figure somthing out. Been working on it since about 10AM this morning and i got nothing, does anyone have a fix?!
Any help would be appreciated!! Thanks Guys!!
Click to expand...
Click to collapse
I had the same issue the other day while experimenting on my mt3g 1.2. What worked for me was using adb to push the stock mt3g hboot and radio and then rerooting my phone. You can download the files you need from the unlockr.com web page and skim his how-to for android in the unrooting section. Hope this helps.
does it still boot into fastboot, hboot, or recovery?
supercobaltss said:
I think i bricked it now..... it stuck on a 0009 SPL and i cannot do a sappimg it wont unzip and i cannot flash a different spl it does the signature verify fail
Click to expand...
Click to collapse
if it boots into fastboot, hboot, or recovery you are not sunk yet. you will need the "official" sappimg.zip or .nbh on your gold card, but it should go through the steps and re-image it.. this will get your phone back to stock.
are you using a Tmobile MyTouch 1.2? or are you using a Rogers Magic?
the files will be different as the hardware requires differnent drivers.
there are many links on this site, or theunlockr.com that will get you the correct files you will need. make sure you check the md5 sums on anything you download to make sure its not corrupted before trying to flash it.
hope this helps.
Hi.
i need some advice to see what can i do to get the phone working again.
case:
htc magic 32A.
ENG S-OFF H.
hboot-1.33.2005
radio.3.22.20.17.
i had cyangoenmod 6. working just fine! for several months. a couple a days ago (without installing anything new) it crashed, and now it gets stuck in the splash screen.
symptoms:
i can enter fastboot. fastboot devices lists the phone.
i can't enter recovery. fastboot boot recovery.img doesnt work, still stuck in splash screen. fastboot flash recovery.img doesnt work either.
i thought the next step would be a factory reset so i got a friend to copy the sappimg.zip on my sdcard and tried to run hboot mode, but it says NO IMAGE! when checking SAPPIMG.zip
should i use RUU? whats the procedure there?. from where i run it?. also i don't know whats the right one for my phone. i see this list: http://forum.xda-developers.com/showthread.php?t=659403.
and fastboot getvar version-main gives me: 3.05.529.9. while CID gives BSTAR301
i dont see that exact version in the list, and the only one with that cid is 2.20.515.5 HTC Chile BrightStar/Entel. im a little confused here...
thanks for any help!.
the problem seems to be bigger. I decided to go with the RUU directly from Htc site. For my device, i gave my serial no. and downloaded the .exe for magic_brightstar. It did successfully updated everything (?), radio, hboot, recovery, system, splash....
But i start the phone and it is still stuck in the freaking init screen.
I don't understand, what else can i do?.
Can you enter the recovery now?
No. the recovery doesn't enter. still frozen.
I'm trying to have a working goldcard, but it has been a little tricky without another phone to convert the sd. I'm following what amon_ra suggested here http://forum.xda-developers.com/showthread.php?t=548218. Because right now my hboot is locked (after running the factory RUU) and i can't run any of the flashing fastboot commands.
will post what happens...
ok the goldcard did its job, i have again eng spl with all fastboot flashing enabled. but i cant get into recovery yet, no matter what.
at this point i'm thinking on flashing the original hboot, radio and go claim the guaranty...
Any ideas before throwing the towel???
i was thinking that if it is a hardware/firmware problem, it should be possible to test via fastboot oem commands, isn't?
Download my fastboot commander from my signature (the magic version).
It has a special 32A tab.
Using the tool, flash the old combo and see if you can enter recovery afterwards.
You can also flash the new combo and give it try...
got Boot loops, no matter what ROM I used. my phone got stuck on the green "MyTouch" image and restarts in circles,
i could access recovery and fastboot
htc sapphire 32b eng s-off
hboot-1.33.2010
radio_2.22.28.25
jun 2 2009,17:27:03
Flash the 1.33.0013 or 1.33.0013d spl. Most roms want that now
thank you so much my friend
i tried to restore my phone with SAPPIMG_Sapphire_TMUS_1.88.531.1_COC10_release_signed
after that i rooted it with flashrec-1.1.3-20091107-2
then i flashed this spl "update.Engineering-SPL-HBOOT-1.33.2010-signed"
and flashed Gios_OTA_Froyo-2.0 ROM
it work like charm
but when i started another ROM it stuck again in boot loop
so my friend did you think it will need the spl you told me about "1.33.0013"to get out of boot loop and i think i'll flash the engineering one wright?
i tried to download 1.33.0013 but no luck could you send me the link?
thank you again for your help!
this is the only link i found about 1.33.0013
it's dead i hope you could point me out for a download link to this spl,
Thanks!
okay it's done
hboot-1.33.0013d
radio-2.22.27.08
tried to flash this rom signed_update-cm-7.1.0-RC2-DS still boot loop
Try flashing a kernel on top of the rom. Try ezterrys ezgb kernel
Hi,
i couldn't describe how much i appreciated your help,
yesterday i download SPL 1.33.0013d and radio-2.22.27.08
https :// rs655dt.rapidshare. com /files/429271074/dream_2708kit.zip
"remove spaces to download the files"
then flashed it with fastboot
fastboot flash recovery recovery-RA-dream-v1.7.0-cyan.img
fastboot flash radio radio-2.22.27.08.img
fastboot flash hboot hboot-1.33.0013d.img
fastboot reboot-bootloader
fastboot erase system -w
fastboot erase boot
after that any rom work great
i tried Ginger yoshi, it worked fine, then i tried cyanogenmod 7 unfortunately it didn't configure the WiFi setting probably he didn't recognize the mac address, so i'll work with Ginger yosh for now,
Thank you again my friend!
I tried to but a full steps instructions to help any one have the same problem.