Database Users

[HELP] Hboot becomes S-ON 1.76.2007

Please help!
My magic (32A) suddenly changed its hboot to S-ON!!
Info in fastboot mode:
SAPPHIRE PVT 32A ENG S-ON H
HBOOT-1.76.2007 (SAPP10000)
CPLD-12
RADIO-6.35.10.18
Now I can't flash anything in fastboot, I have RA recovery v1.5.3.1.
But I can't mount the sdcard for updating the hboot again.
I have goldcard, but usb connection error show up while verifying the phone..
Can anyone has same issue?
Thank you

littlestrong said:
Please help!
My magic (32A) suddenly changed its hboot to S-ON!!
Info in fastboot mode:
SAPPHIRE PVT 32A ENG S-ON H
HBOOT-1.76.2007 (SAPP10000)
CPLD-12
RADIO-6.35.10.18
Now I can't flash anything in fastboot, I have RA recovery v1.5.3.1.
But I can't mount the sdcard for updating the hboot again.
I have goldcard, but usb connection error show up while verifying the phone..
Can anyone has same issue?
Thank you
Click to expand...
Click to collapse
Damn, I hate members like you.
a) You don't even tell us what you did wrong
b) What does this have ANYTHING TO DO TO BELONG IN THE MAGIC DEVELOPMENT?

I am sorry that I did not mention the whole story.
Where should I post this message to? myTouch 3G, Magic General?
I am using "Super-Hero (Build By AhmgskMod)" before came into this situation, I found that the phone can boot, and looping in the htc Magic screen.
Show I tried to wipe and flash the rom again. I flashed the rom for 5-6 times, but it still won't boot..
At the last one I tried to flash another rom from XDA, I found the sdcard can't mount in recovery mode. And I go to fastboot mode, S-ON is observed.
I flash my phone with sappimg.zip in hboot mode (Sdcard file can be loaded). Now I am with the rom in (RUU_Sapphire_HTC_Europe_304401), but the sdcard is not mounted after I boot up my phone.
I believe that this issue is due to the S-ON hboot, I am finding some way to flash the hboot again (I tried -- fastboot NOT OK, recovery can't mount sd)
Seek for help. Thank you very much.

littlestrong said:
I am sorry that I did not mention the whole story.
Where should I post this message to? myTouch 3G, Magic General?
I am using "Super-Hero (Build By AhmgskMod)" before came into this situation, I found that the phone can boot, and looping in the htc Magic screen.
Show I tried to wipe and flash the rom again. I flashed the rom for 5-6 times, but it still won't boot..
At the last one I tried to flash another rom from XDA, I found the sdcard can't mount in recovery mode. And I go to fastboot mode, S-ON is observed.
I flash my phone with sappimg.zip in hboot mode (Sdcard file can be loaded). Now I am with the rom in (RUU_Sapphire_HTC_Europe_304401), but the sdcard is not mounted after I boot up my phone.
I believe that this issue is due to the S-ON hboot, I am finding some way to flash the hboot again (I tried -- fastboot NOT OK, recovery can't mount sd)
Seek for help. Thank you very much.
Click to expand...
Click to collapse
u still hav hero recovery??? ( custom recovery)

Yes, I have the hero recovery (custom), I flash in by boot the hero recovery in fastboot, and flash using:
adb push recovery.img /
adb shell flash_image recovery /recovery.img
The problem is I cannot access to sdcard in recovery mode, also can't use the sdcard when I boot up the phone.
Updated: I copy the rom.zip and rom1.zip from RUU update. The rom.zip container radio and hboot. Should I flash the rom.zip in hboot, to recovery the radio and hboot?

s-on + no sd card.
This problem seems to be experienced by many people in the process of upgrading to the new radio. I have experienced it myself and i never managed to solve it. Luckily i manafed to get a replacement phone. I am still afraid of upgrading the radio on my new device in fact. I think that this seems to be a common problem which deserves to be given more attention by the devs. I. Believe there were a couple of people on the forum who managed to fix it but they are few and far between.

fastboot oem enableqxdm 0
There's been quite a few SD card problem forum threads. Try harder next time.

xaueious, Thank you very much! Now I can access the sdcard! I will try harder to search in forum before asking question next time.
And thank you for the support of everyone in this post too.

This command was not recognized by the phone in my case. It's not always that simple to solve. It would be better to know what causes it in the first place so that people can avoid it.
xaueious said:
fastboot oem enableqxdm 0
There's been quite a few SD card problem forum threads. Try harder next time.
Click to expand...
Click to collapse

Now I can use the rom in (RUU_Sapphire_HTC_Europe_304401), I use hboot mode and flash the rom1.zip from the captioned rom (renamed to sappimg.zip)
But I can't start any custom rom for new radio from XDA here (installed in recovery mode, update from zip). It just stuck at the htc Magic screen, can't boot into phone.
My SPL/Hboot is still 1.76.2007 S-ON. I have tried flash the "update-hboot-1762007-signed.zip" in recovery mode, but the Hboot is still S-ON.
I believe the problem is due to the S-ON Hboot, so I can't start any custom rom. Any way I can turn the Hboot to S-OFF?
Thank you!

Update to Amon_RA's newest hero recovery. You should be able to mount your SD card in that.

Thank you sindrefyrn. I updated to the latest RA hero recovery.
I can mount sdcard with hero recovery 1.5.3.1 too.
But problem is I can't boot my phone with custom rom, only stock rom will work.
My ENG SPL 1.76.2007 is S-ON instead of S-OFF.
I will tried to flash the RUU update to replace my existing radio and SPL tomorrow, my home PC using win7 and can't verify my phone while RUU update, I will tried it tomorrow in office with winXP.
Hope it works, will report here.

littlestrong said:
Thank you sindrefyrn. I updated to the latest RA hero recovery.
I can mount sdcard with hero recovery 1.5.3.1 too.
But problem is I can't boot my phone with custom rom, only stock rom will work.
My ENG SPL 1.76.2007 is S-ON instead of S-OFF.
I will tried to flash the RUU update to replace my existing radio and SPL tomorrow, my home PC using win7 and can't verify my phone while RUU update, I will tried it tomorrow in office with winXP.
Hope it works, will report here.
Click to expand...
Click to collapse
You can flash a RUU with higher manversion then your previous ROM.

I often find that when I go into recovery my sdcard is not mounted. The solution (for me) is to:
adb shell
mount /sdcard
exit
And that's it.
No idea why the sdcard is mounted sometimes but not other times though

sindrefyrn said:
You can flash a RUU with higher manversion then your previous ROM.
Click to expand...
Click to collapse
Is that mean I can't downgrade my SPL and radio?
I can't use fastboot to flash my SPL and radio, because S-ON SPL not allow me to do so.
Could I copy the rom.zip from RUU which contain SPL and radio, then renamed it to sappimg.zip and flash in Hboot mode?
The only thing I want to do is change my SPL back to S-OFF. What can I do?
Thank you for your help.
update: Is there any SPL.zip I can use to flash my SPL in recovery mode?
update 2: I tried flash the ENG SPL 2007.zip in recovery mode, but it can't change my SPL back to S-OFF. Is it because the SPL are in same version, so, I am not upgrading my SPL by this action?

littlestrong said:
Is that mean I can't downgrade my SPL and radio?
I can't use fastboot to flash my SPL and radio, because S-ON SPL not allow me to do so.
Click to expand...
Click to collapse
No reason you can't downgrade your SPL and radio that way, as long as the mainver of the RUU you're flashing is newer than your current.
Could I copy the rom.zip from RUU which contain SPL and radio, then renamed it to sappimg.zip and flash in Hboot mode?
Click to expand...
Click to collapse
Yes, that's possible. However, the mainver still needs to be higher than your current.
The only thing I want to do is change my SPL back to S-OFF. What can I do?
Click to expand...
Click to collapse
If you haven't yet tried, apply this as normal trough recovery.
update: Is there any SPL.zip I can use to flash my SPL in recovery mode?
Click to expand...
Click to collapse
Yes, see above.

etibon said:
This command was not recognized by the phone in my case. It's not always that simple to solve. It would be better to know what causes it in the first place so that people can avoid it.
Click to expand...
Click to collapse
That only works with the 1.76.xxxx SPL, which he has.
From personal experience, I can tell you that I screwed my phone up by flashing hboot and radio in the wrong order.. Ultimately, it prevented me from flashing the Hero recovery... So basically, I was stuck with new SPL/Radio with Sapphire recovery for a while. But here is where things got worst: I attempted to flash BACK to the OLD SPL/Radio, which worked. However, somewhere along the way enableqxdm(1.76.x only) was turned ON, and stayed on. The only thing I was able to do was go back to the stock Rogers RUU (old radio), but left with no SD card which really sucks. When Sense was released for Rogers, I flashed the new ROM and Radio (via USB) and turned enableqxdm off. All fixed at the cost of being rooted
littlestrong; which ROMs are you trying to flash? There could be a really simple explanation as to why they don't work.
1. Did you WIPE data/dalvik/ext before flashing? <- this is pretty important
2. Flash a ROM specific to the new radio?
And if you're trying to reflash your radio and SPL, what errors do you get?

sindrefyrn:
I have tried update your SPL 1.76.2007 from recovery. It remain S-ON afterward.
So, I downgrade my SPL to 1.76.0007 and raido 6.35.07.xx from HK stock sense rom (Hboot mode -> sappimg.zip). The SPL and radio are successful downgraded. Then, I flash the SPL the 1.76.2007 in recovery. No luck.. SPL has been upgraded to 1.76.2007, but it is still S-ON..
pyee0124:
I flash all roms below with full wipe (all 5 wipes in recovery), they all are for new radio:
--[ROM][32A][6.35] SenseUI 2.1 based on DROID Eris dump. Both v01 and v02.
--Super-Hero (Build By AhmgskMod) [Based On Eris Dump].
--Eclair AME [Android 2.1] MADE BY ME [Only For New Radio] [28th Feb]
I also restore a nandroid backup which it was backup with Eclair AME rom, when my phone in good condition.
All the above roms can't boot up, all stop at htc Magic screen..
I search this forum and found 2 topics about making ENG SPL to S-OFF from S-ON.
1. Flash the nandroid backup boot.img file to the phone, might be one of them will make the SPL to be S-OFF.
2. Remove the battery for a couple of day, and leave the phone as it is .The phone might change to S-OFF itself.
Another problem, I can't flash my magic in RUU. ERROR 170 was found both in XP and win7. I tested it in computer with and without htc sync. I have install proper driver.
I have one more question, I can flash custom rom for new radio here in recovery mode. But all 3 roms I had tried won't boot up and stuck in htc Magic screen. Can anyone flash custom rom with S-ON SPL and found no problem in boot??

You should still be able to flash custom ROMS regardless of S-ON. One of the other things you should try is formatting your SD card again.. Try a full FAT32, then try partitioning afterwards. I found that I could only boot Ahmgsk with FAT32/Swap/Ext2.

pyee0124: I have flashed the [ROM][32A] CursorSense32A-1.2.6.1, it can boot up with my S-ON SPL.
I will test flashing others rom and see if I can use Android 2.1.

Mytouch 3G 1.2/LE (I THINK)Semi-Bricked 2 !!! Helppp !!!

Bare with me this is my first thread :
Mytouch 1.2 doesnt get passed Splash screen. It wont load into recovery.
It boots in FASTBOOT & HBOOT. But thats it.
I have :
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.76.2007 (SAPP31000)
CPLD-13
RADIO-6.35.10.18
If anyone can help i would really appreciate it !!!!
__________________
White Mytouch 3G 1.2 (T-Mobile)
Amon_RA Sapphire v1.6.2G Recovery

I am totally wrong!

Start here : http://forum.xda-developers.com/showthread.php?t=623141
Make a gold card from this info : http://forum.xda-developers.com/showthread.php?t=622530
Grab the Engineering SPL (2010) from here : http://forum.xda-developers.com/showpost.php?p=4332591&postcount=1
Put the Engineering SPL onto the new Gold card, in Fastboot go into Hboot mode and flash that
At that point you'll have a new SPL but no rom's gona work. (It'll show up as a 32B, H etc thus why no rom will work)
Then go here : http://forum.xda-developers.com/showthread.php?t=623141
get the zip file with the radio.img/hboot for the fender.
(Download the Recovery 1.6.2G from here http://forum.xda-developers.com/showthread.php?t=530492 instead of the one in the link above)
The instructions from the link above
fastboot flash radio radio.img
fastboot flash hboot hboot_7201A_1.33.0013G_091021.nbo
fastboot flash recovery recovery-RA-sapphire-v1.6.2G.img
fastboot reboot-bootloader
Click to expand...
Click to collapse
Grab the MT3GFender32A-Stock-1.0-signed.zip from the link above
Go into recovery and flash that rom.
You'll then have a rooted stock rom. Which is how I rooted my fender. DO NOT use a radio from any other thread than the one I specified, otherwise you have a very strong chance of actually bricking your phone.
The reason you go down to a 2010 Engineering SPL in the first place is because the 1.33.0013 is perfected and you can't flash anything, so least this way you go down to 2010, flash the needed radio/hboot/recovery allowing it to be rooted, then you flash the stock (rooted) rom.

kbeezie said:
Start here : http://forum.xda-developers.com/showthread.php?t=623141
Make a gold card from this info : http://forum.xda-developers.com/showthread.php?t=622530
Grab the Engineering SPL (2010) from here : http://forum.xda-developers.com/showpost.php?p=4332591&postcount=1
Put the Engineering SPL onto the new Gold card, in Fastboot go into Hboot mode and flash that
At that point you'll have a new SPL but no rom's gona work. (It'll show up as a 32B, H etc thus why no rom will work)
Then go here : http://forum.xda-developers.com/showthread.php?t=623141
get the zip file with the radio.img/hboot for the fender.
(Download the Recovery 1.6.2G from here http://forum.xda-developers.com/showthread.php?t=530492 instead of the one in the link above)
The instructions from the link above
Grab the MT3GFender32A-Stock-1.0-signed.zip from the link above
Go into recovery and flash that rom.
You'll then have a rooted stock rom. Which is how I rooted my fender. DO NOT use a radio from any other thread than the one I specified, otherwise you have a very strong chance of actually bricking your phone.
The reason you go down to a 2010 Engineering SPL in the first place is because the 1.33.0013 is perfected and you can't flash anything, so least this way you go down to 2010, flash the needed radio/hboot/recovery allowing it to be rooted, then you flash the stock (rooted) rom.
Click to expand...
Click to collapse
from what it looks like hes already made a goldcard if he has that radio and spl........... he needs to flash the stock radio, spl, and recovery in fastboot...

ceas909 said:
from what it looks like hes already made a goldcard if he has that radio and spl........... he needs to flash the stock radio, spl, and recovery in fastboot...
Click to expand...
Click to collapse
If he already made the gold card, that's good, but may still need to flash the engineering SPL (2010) because I think 2007 is also perfected. I would still just flash the engineering SPL since I Know that works, and at this point we're trying to avoid any chance of bricking.

edit : wasn't 100% sure of what I was saying ;-)

Thats every one for helping I really appreciate it.
I tried flashing the Engineering SPL (2010) but i left it as (Sappimg.zip) and when i flash it through Hboot it asks me if i want to start the update after i press the trackball it says System-unzipping and thats where it stays. it doesnt load. and i tried to flash a couple of of other spls before but it stop after it tried to update the Radio. For some reason i cant update the radio it always freezes when the update is about 95% complete.
Any Answerss ???? Please =\

yonkersboy127 said:
Thats every one for helping I really appreciate it.
I tried flashing the Engineering SPL (2010) but i left it as (Sappimg.zip) and when i flash it through Hboot it asks me if i want to start the update after i press the trackball it says System-unzipping and thats where it stays. it doesnt load. and i tried to flash a couple of of other spls before but it stop after it tried to update the Radio. For some reason i cant update the radio it always freezes when the update is about 95% complete.
Any Answerss ???? Please =\
Click to expand...
Click to collapse
K, Let's try this, at the point you are now:
Using the zip file from : http://forum.xda-developers.com/showthread.php?t=623141
and the 1.6.2G Recovery from : http://forum.xda-developers.com/showthread.php?t=530492
From your computer:
fastboot flash radio radio.img
fastboot flash hboot hboot_7201A_1.33.0013G_091021.nbo
fastboot flash recovery recovery-RA-sapphire-v1.6.2G.img
fastboot reboot-bootloader
Click to expand...
Click to collapse
If you get a Remote Denied after trying the first command, then your current SPL is perfected. However if it works, continue to flash the hboot and recovery.
PS: I have no clue why it freezes during the SPL flashing, "ROM v2.53.707.2 (Engineerings SPL v1.33.2010)" should have flashed just fine on the MT3G LE.

yonkersboy127 said:
Thats every one for helping I really appreciate it.
I tried flashing the Engineering SPL (2010) but i left it as (Sappimg.zip) and when i flash it through Hboot it asks me if i want to start the update after i press the trackball it says System-unzipping and thats where it stays. it doesnt load. and i tried to flash a couple of of other spls before but it stop after it tried to update the Radio. For some reason i cant update the radio it always freezes when the update is about 95% complete.
Any Answerss ???? Please =\
Click to expand...
Click to collapse
Are you sure it is freezing i have read that flashing a radio can take i think up to 5 or 10 minutes and to just be patient.

Grrrrrrr
i have a mt3g 1.2 on tmobile i have tried over and over and over again and it constantly gets stuck on the splash screen its driving me up a wall!!!! any ideas?

junior.youngman said:
i have a mt3g 1.2 on tmobile i have tried over and over and over again and it constantly gets stuck on the splash screen its driving me up a wall!!!! any ideas?
Click to expand...
Click to collapse
I had the problem where no matter how many times I tried the root procedure, it would eventually freeze on the "ANDROID" splash screen and then go to a black screen, nothing else.
I have no idea if this is the correct thing to do, but I eventually went in to recovery and did a Wipe data/factory reset. Then I did the root procedure again and it finally allowed it to boot all the way. Maybe someone who understands better can comment if this was right. Anyway, it worked for me when I basically had no other choice (or so I thought).

From the little bit of knowledge I have so far you did it correctly. If it gets stuck on the load screen or if the screen turns black you usually have to reboot into recovery then do everything you did. If you're flashing a THEMED rom and this happens that means you didn't flash the original rom first. Binary does this with his themes since making roms for mt3g 1.2 is apparently retarded difficult. And just to break it down a little more, he made a themed rom from stokes eclair rom. So I had to flash that rom and then flash his rom since its not a full rom, only a theme. Hope that helped

kbeezie said:
Start here : http://forum.xda-developers.com/showthread.php?t=623141
Make a gold card from this info : http://forum.xda-developers.com/showthread.php?t=622530
Grab the Engineering SPL (2010) from here : http://forum.xda-developers.com/showpost.php?p=4332591&postcount=1
Put the Engineering SPL onto the new Gold card, in Fastboot go into Hboot mode and flash that
At that point you'll have a new SPL but no rom's gona work. (It'll show up as a 32B, H etc thus why no rom will work)
Then go here : http://forum.xda-developers.com/showthread.php?t=623141
get the zip file with the radio.img/hboot for the fender.
(Download the Recovery 1.6.2G from here http://forum.xda-developers.com/showthread.php?t=530492 instead of the one in the link above)
The instructions from the link above
Grab the MT3GFender32A-Stock-1.0-signed.zip from the link above
Go into recovery and flash that rom.
You'll then have a rooted stock rom. Which is how I rooted my fender. DO NOT use a radio from any other thread than the one I specified, otherwise you have a very strong chance of actually bricking your phone.
The reason you go down to a 2010 Engineering SPL in the first place is because the 1.33.0013 is perfected and you can't flash anything, so least this way you go down to 2010, flash the needed radio/hboot/recovery allowing it to be rooted, then you flash the stock (rooted) rom.
Click to expand...
Click to collapse
Thanks for these steps, I had the exact same problem and you made it easy for me to solve it without searching through 1000's of threads. Kudos!

I'm a little new to rooting my mytouch 1.2 and I follow theunlockr way of doing things and ended up with a phone that get stuck on the htc magic screen i can use fastboot and hboot but no recovery. when in fastboot my phones says
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013
CPLD-13
RADIO-3.22.20.17
Oct 21 2009,22:33:27
eh I DON'T KNOW WHAT TO DO YOU GUYS IM GOING INSANE
:/ please help

fastboot flash radio radio.img
fastboot flash hboot hboot_7201A_1.33.0013G_091021.nbo
fastboot flash recovery recovery-RA-sapphire-v1.6.2G.img
fastboot reboot-bootloader[/QUOTE said:
Whenever i try to flash, i get this error
FAILED <remote: not allow>
Click to expand...
Click to collapse

iamjamesxia said:
Whenever i try to flash, i get this error
FAILED <remote: not allow>
Click to expand...
Click to collapse
This is old, use the "Old school" root method in my signature.

Trouble Rooting Mytouch 1.2

Hello,
I'm not an expert at modding and hacking but I can definately follow directions. I used a G1 for about a year and flashed it plenty of times with different roms, radios, and spls. I ended up getting a MyTouch 1.2 and proceeded to try to root it so that I can enjoy CM's great roms.
Followed the directions on the unlockr
Made the gold card and went to flash the sappimg.img from the site. The flash went through fine but the phone just got stuck at the HTC Magic screen. Now I know what my mistake was there. I didn't think it was a big deal and continued with the steps. Mainly because I didn't see any infomation on what to do if it doesn't go through. Flashed the radio, then went to the hboot. Received image update failed error message. Long story short, I experienced what having a brick feels like.
The reason I am explaining all of this is for people to learn from my mistakes and to get some clarification on what I am writing next.
I got the phone exchanged (only had it for a day) and began researching more to find out what I did wrong. I found this crypysmoker's thread.
And then I found the message:
READ READ READ. DO NOT download the SAPPimg.zip file it says on that page.
Get the top fixed SPL file 2010 from here
Click to expand...
Click to collapse
In my research, I discovered that the mytouch 1.2 has several spl's that have been hacked and not. I figured out that the file on theunlockr wasn't the fixed spl and that is mainly the reason for my brick and the frozen HTC Magic screen.
I want to enjoy the gifts that CM has to offer. Being stuck on normal 1.6 is well saddening to say the least. But I am worried about flashing the wrong spl and have the situation repeat again as I would figure I would be screwed this time around and wouldn't be able to get it replaced.
Can anyone provide more information about this? Can I flash the Engineerings SPL v1.33.2010 and not run into the same problem? I understand that there isn't a 100% certainty of working. Most of my searches show that more people have bricked this phone than any other.
Thanks in advance and sorry for the length.
Phone Info:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02

Well, I did it all again. Redownloaded all the files. Setup a new goldcard. This time I let it sit for over 45 mins. Never got past the HTC Magic Screen. Adb doesn't see it nor does the light come on to say that it is charging. Which would show me that it has indeed locked up.
Anyways it shut off on its own since it wasn't getting usb power and I guess the battery died. I'm still able to reboot back to hboot. I attempted to reflash the sappimg.zip file. Right now its going on 10 mins sitting on the
[1] SYSTEM - Unzipping
What I will add tho is that my info changed.
SAPPHIRE UNKNOWN 32A ENG S-OFF H
HBOOT-1.33.2010 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
I tried reformatting the SD and recreated the Gold Card as I noticed some of the Hex changed but still getting the same issue.

the phone won't run anything other than spl 1.33.0013 and radio 2.22.23....w/e x)
Get the sappimg you had before and flash it in hboot mode which should give you spl 1.33.0013. In fastboot mode, flash your spl to 1.33.2010again, then flash radio 2.22.23 or w/e, then flash amon ra recovery, then flash stock spl (1.33.0013).
All the files you need are here: http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
The reason it wont boot up is because you have engineering spl and the wrong radio on. Again, it will only boot up with the stock radio and spl~!!!

hacker01 said:
the phone won't run anything other than spl 1.33.0013 and radio 2.22.23....w/e x)
Get the sappimg you had before and flash it in hboot mode which should give you spl 1.33.0013. In fastboot mode, flash your spl to 1.33.2010again, then flash radio 2.22.23 or w/e, then flash amon ra recovery, then flash stock spl (1.33.0013).
All the files you need are here: http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
The reason it wont boot up is because you have engineering spl and the wrong radio on. Again, it will only boot up with the stock radio and spl~!!!
Click to expand...
Click to collapse
I don't know where I would find the original stock sappimg. The one that is on the website is the sappimg that needs to go on when you are stock at the beginning.
Also my HBoot doesn't seem to be unzipping cause that is where it gets stuck. Is there a way to do it all from fastboot? Since I am currently stuck in the 2010 spl, can I flash the stock spl through fastboot without the radio?
I just don't get why I am having this problem. I followed that website to the letter. And I know that at this point if I attempt to flash the radio back to stock, I will completely brick it.

Since you dont want to flash the radio, flash the amon ra recovery FIRST. Then flash the stock spl. If it doesn't boot up, then you'll need to get the engineering spl back on again and flash stock radio (the one in the link).

hacker01 said:
Since you dont want to flash the radio, flash the amon ra recovery FIRST. Then flash the stock spl. If it doesn't boot up, then you'll need to get the engineering spl back on again and flash stock radio (the one in the link).
Click to expand...
Click to collapse
I couldn't flash the recovery in fastboot.
Tried Fastboot boot recovery recovery.img
Got an error message Recovery not found.
Wasn't sure if I wanted to try flashing the recovery before finding out if it can brick it. Like the original post says, my first MT1.2 I flash the spl from unlockr screen locked up but could get into fastboot so flashed the radio and then tried the spl like the directions say and I completely bricked it.
I don't want to make the same mistake twice.

Unfortunately, there's a chance of bricking every time you flash anything.
Anyways, this might be redundant but is the recovery imaged named recovery.img? Like you actually renamed it? If not, you'll have to type out the exact name.

hacker01 said:
Unfortunately, there's a chance of bricking every time you flash anything.
Anyways, this might be redundant but is the recovery imaged named recovery.img? Like you actually renamed it? If not, you'll have to type out the exact name.
Click to expand...
Click to collapse
No it wasn't named recovery.img, was just using it to save time. I did spell out the recovery's full name.

When you enter the command "fastboot devices" it shows a serial number right? And the recovery image is in your tools folder of your androidsdk folder?
Sorry for the redundant questions, we're just going back to the basics really quick right now.

hacker01 said:
When you enter the command "fastboot devices" it shows a serial number right? And the recovery image is in your tools folder of your androidsdk folder?
Sorry for the redundant questions, we're just going back to the basics really quick right now.
Click to expand...
Click to collapse
yup and yup

I see the problem. Your mobo is recognized as 32a S off H. You're recovery image is probably the G version. What you could do is download the H version and flash it although i doubt your phone will still boot up at that point.
You could try flashing the H version of amon ra's recovery image and afterwards, see if it boots up. Then, if it doesnt boot up, flash stock spl (1.33.0013) and see if it boots up.
I'm pretty sure your phone will end up not booting up and you'll eventually have to flash stock radio as well and then flash the G version recovery back on.
The reason your mobo is recognized as the H version and not the G version is because of the radio.
EDIT: I just realized I made a mistake. I meant to say the mobo is recognized as the H version because of the SPL, not the radio.

EpikFail said:
I couldn't flash the recovery in fastboot.
Tried Fastboot boot recovery recovery.img
Got an error message Recovery not found.
Wasn't sure if I wanted to try flashing the recovery before finding out if it can brick it. Like the original post says, my first MT1.2 I flash the spl from unlockr screen locked up but could get into fastboot so flashed the radio and then tried the spl like the directions say and I completely bricked it.
I don't want to make the same mistake twice.
Click to expand...
Click to collapse
Heres your problem. If recovery is not found then you didnt put it in your Androidsdk\tools folder did you? or did you rename it? Oooorr, you put it in there while adb was running and didnt restart it to see the file itself

crypysmoker said:
Heres your problem. If recovery is not found then you didnt put it in your Androidsdk\tools folder did you? or did you rename it? Oooorr, you put it in there while adb was running and didnt restart it to see the file itself
Click to expand...
Click to collapse
He already said that its in the tools folder.

hacker01 said:
I see the problem. Your mobo is recognized as 32a S off H. You're recovery image is probably the G version. What you could do is download the H version and flash it although i doubt your phone will still boot up at that point.
You could try flashing the H version of amon ra's recovery image and afterwards, see if it boots up. Then, if it doesnt boot up, flash stock spl (1.33.0013) and see if it boots up.
I'm pretty sure your phone will end up not booting up and you'll eventually have to flash stock radio as well and then flash the G version recovery back on.
The reason your mobo is recognized as the H version and not the G version is because of the radio.
Click to expand...
Click to collapse
Sorry for the last reply, I do all my hacking at work so my adb setup is there. So I did this.
fastboot devices
XXXXXXXXX fastboot
fastboot boot recovery recovery-RA-sapphire-c1.6.2G.img
cannot load 'recovery'
fastboot flash recovery recovery-RA-sapphire-c1.6.2G.img
send OKAY
write OKAY
Click to expand...
Click to collapse
Holding home+power, wouldn't boot into recovery. Seems to still be stuck. Went back to fastboot
fastboot flash hboot hboot.nb0
send OKAY
write OKAY
Click to expand...
Click to collapse
Still same thing so back to fastboot I go
fastboot radio radio.img
sending 'radio' <21504 KB>... FAILED <remote: not allowed>
Click to expand...
Click to collapse
My phone now reads
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
I can tell that the radio is still the old one. It seems the spl worked and put it back to stock but still no recovery and I guess I can't fastboot anything either.
So I assume I need to flash back eng spl and see if it will boot, right?

Even as the recovery and spl are compatible, you see that it still won't boot up. What you gotta do now is flash the engineering spl and do the same as before except flash the radio as well.
In the end, your mytouch should read:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
The same as stock before EXCEPT this time, you'll have amon ra's recovery. That's when you know you're done. Just follow the guide from before and you'll be fine.

hacker01 said:
Even as the recovery and spl are compatible, you see that it still won't boot up. What you gotta do now is flash the engineering spl and do the same as before except flash the radio as well.
In the end, your mytouch should read:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
The same as stock before EXCEPT this time, you'll have amon ra's recovery. That's when you know you're done. Just follow the guide from before and you'll be fine.
Click to expand...
Click to collapse
So I flashed the eng spl again. Still wouldn't boot. Got the same SAPPHIRE UNKNOWN 32A ENG S-OFF H
did:
fastboot flash recovery recovery-RA-sapphire-v1.6.2G.img
send OKAY
write OKAY
fastboot boot recovery
cannot load 'recovery'
Click to expand...
Click to collapse
I'm still worried about flashing the radio....
but I should fastboot the radio and then the hboot.nb0, right?

Solved
I would like to start out by saying, Thank you so much hacker01 for your help! You don't know how much I appreciate everything.
I was able to get it back working and fully running CM5.0.7
After I reloaded the eng spl, like I said, I was running into the same problems. Wouldn't boot, goes into fastboot, etc.
I grabbed the stock radio and spl NOT from the unlockr page this time but from the link on crypysmoker's thread.
fastboot flash radio radio.img
fastboot flash hboot hboot_7201A_1.33.0013G_091021.nbo
fastboot flash recovery recovery-RA-sapphire-v1.5.2G.img
fastboot reboot-bootloader
Click to expand...
Click to collapse
Just like it said and sure enough got into recovery! Flashed a rom and it booted up.
I know this technically isn't solved cause I really don't know what went wrong in the first place. I can ensure you that I can follow directions and did. The only thing that makes any sense is the files on theunlockr's website is bad. Guess we can just chalk it up to bad luck.
But if anyone wants to root their mytouch 1.2, crypysmoker's thread is definitely the way to go.
Thank you again hacker01! I hope I can pay it forward.

You did it right, it's just that any radio that is not 2.22.23 won't work with the mt3g 1.2/Fender LE right now. And no problem! Glad you got it up and running. Enjoy your mytouch

Mod. edit: not dev related, moved to general

Please, help!
I have the exact same problem: I was following the Unlockr's instructions, made the goldcard, flashed the sappimg without getting any errors, and now the phone is stuck on the htc magic boot screen. I am not experienced and now I am scared sh**less, because the phone belongs to my girlfriend Please, give me step-by-step instructions how to fix it, because I really dont want to improvise. The phone is MyTouch 1.2...
Thank you in advance!!!
SAPPHIRE UNKNOWN 32A ENG S-OFF H
HBOOT-1.33.2010 (SAPP31000)
CPLD-13
RADIO-3.22.20.17

Flashed 32B radio on 32A, Now showing as 32B in Fastboot, No Recovery

I have a T-Mobile branded MT3G 1.2 that I flashed today's CM nightly onto and the screen got the green tint issue. I looked into it and read I need to flash pershoot's kernal to fix it, but i needed the new radio (I had the 2.22 and all the 32A kernels said they were for 3.22).
I tried to fastboot the 32A radio, but got an error because it was a perfected SPL (I think thats why, at least), so I tried to flash an ENG SPL for 32A, using the files for reverting back from 6.35.07 radio to 3.22 for the 32A from gadget-space.com I flashed the HBOOT.zip using RomManager, and when I rebooted, the phone did not get past the splash screen. Couldn't boot into recovery but fastboot works.
now it's showing this in the fastboot info:
SAPPHIRE UNKNOWN 32B ENG S-OFF H
HBOOT-1.33.2010 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
Jun 2 2009,17:27:03
No matter what HBOOT I flash, i can't get it to change back to showing 32A. Also I've tried reflashing Amon Ra's Recovery and still can't get back into there.
Any ideas on how to get this phone working again?

I did the same thing as you trying to install the official T-mobile Froyo OTA ported for the 32A. After flashing the radio and spl I could no longer get the phone to boot or go into recovery. The only thing I could do was fastboot. After trying half a dozen SAPPIMG.zip files I managed to find the correct one. All I had to do was put the SAPPIMG.zip onto the sd card, put it in my phone, fastboot to hboot and it should unzip the SAPPIMG and install on your phone. Not sure if this will work for you but it's worth a shot.

found the unrooted imgboot.zip, flashed it and re-rooted with androoter, now all is well.
Now that I have this back to a working phone, should i update the radio?

I have no idea but now that I'm back to stock 1.6 I think I'm just gonna wait for the T-Mobile official OTA Froyo for the 32A. It should be out fairly soon and it'll be better than any 2.2 rom you'll find online since it was designed specifically for the 32A and not ported over or anything.

Where did you find the unrooted img.zip i been looking all over the net?

catracho713 said:
Where did you find the unrooted img.zip i been looking all over the net?
Click to expand...
Click to collapse
Start at part II, step 3.

[Q] MT3G 1.2 no adb/recovery/rom

I've been looking non stop for a week for a solution and none seem to work for me. It's a 1.2 with a 3.5mm jack on the top.
Ok, well first, i rooted it and it was working fine: recovery, adb, rom. But then i decided to run cyanogen 7. I flashed 6.35 radio wrong and in the wrong order. I panicked and went into fastboot and erased radio, recovery, and hboot. Then i tried to flash using fastboot and it says now failed<remote: not allow>
i do have a fastboot device.
Displayed on phone:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAPP31000)
CLD-13
RADIO-6.35.10.18
i tried to flash sappimg.zip through bootloader on my phone but it keeps on getting stuck on radio V_2 update
Any Information i would glad to help you help me.

Wrong SPL/radio for that phone. Hope you got a goldcard....

yea. i have a gold card but what do i do?
i tried to flash sappimg.zip through bootloader on my phone but it keeps on getting stuck on radio V_2 update

iamjamesxia said:
yea. i have a gold card but what do i do?
i tried to flash sappimg.zip through bootloader on my phone but it keeps on getting stuck on radio V_2 update
Click to expand...
Click to collapse
Use the "Old school" root method from my signature.