Related
Hi All,
I've test all of Android builds with lastest kernels but Android on hd2 still eats battery like a T-Rex
My phone survival time not longer than 6 hours on GPRS network.
How about yours?
Come on man, I'm fairly new here but I'm comfortable enough to say... You have to have seen that there are several threads not only on this same topic, but even on how to improve your battery life with Android.
I've try all of these tips not work for me How is yours?
Make sure to turn down the brightness of your screen. There is a thread not far from this one titled "how to improve battery life on Android HD2." Read that. Also put your phone on a charger any time you're near one: desk, car, couch, etc. Disable some of the always on widgets, maybe don't sync social networks or minimize the frequency they sync... the list could go on.
The fact of the matter is these are not final builds and are running from the SD card. A super long battery life isn't to be expected. Follow some if the steps above, read the how-to thread, and give it a shot.
Don't forget to thank the devs who put this together.
Sent from my HTC Desire using XDA App
With SetCPU running and set up properly, after a day of normal use (around 16 hours) on Shub's Cyanogen's 1.1 build I have around 15% battery left. So clearly you have something setup wrong to be only getting 6 hours. My battery life is now no worse than it was on Windows Mobile.
yeah i get over 20 hours
I got 20 hours with heavyish use for 10 hours, and 10 hours no use.
Which is about the same as i'd get with just winmo.
I could easily use this build for my day to day phone
trueside said:
I've try all of these tips not work for me How is yours?
Click to expand...
Click to collapse
If I'm using the phone heavily, 12-15 hours. I have no idea how much idle time I would get as my phone is rarely idle as I use it for work constantly... And this is without using SetCPU or any of the battery life tips/tricks honestly. Keep in mind I use the T-Mobile "extended battery" case which recharges my battery with the flip of a switch on my case but I don't ever let it get below 20%.
Hmm I see. I'm starting to thing my battery problem doesn't about Android Builds maybe my SD cards needs a lot of power to work?? What is your android setup? Which build which zimage?
jjones1983 said:
If I'm using the phone heavily, 12-15 hours. I have no idea how much idle time I would get as my phone is rarely idle as I use it for work constantly... And this is without using SetCPU or any of the battery life tips/tricks honestly. Keep in mind I use the T-Mobile "extended battery" case which recharges my battery with the flip of a switch on my case but I don't ever let it get below 20%.
Click to expand...
Click to collapse
um...that's not a really good comparison.
that's like saying "I can get 1000 miles on one fill up, but I have two tanks and just flip the switch for the second tank".
What do you get with out using the extended battery case?
HotShotAzn said:
um...that's not a really good comparison.
that's like saying "I can get 1000 miles on one fill up, but I have two tanks and just flip the switch for the second tank".
What do you get with out using the extended battery case?
Click to expand...
Click to collapse
Sorry, I didn't make that clear. I get 12-15 hours without having to flip on my case. I usually switch it on at around 20%, which is why I said I never let it go below 20%...
Edit: I forgot he asked me which build and zImage as well.
MattC Froyo RC 1.4, 08/03 zImage.
battery "life" is not the main issue here.
in my opinion, the main issue is power management. that causes short battery life combined with high battery temperature.
can the devs say the reason(s) why is the power management that bad? that is the main issue with android builds right now, once it's solved, android can be a true main OS for everyday use.
trueside said:
Hmm I see. I'm starting to thing my battery problem doesn't about Android Builds maybe my SD cards needs a lot of power to work?? What is your android setup? Which build which zimage?
Click to expand...
Click to collapse
i zimage is out yesterday
victorbd said:
i zimage is out yesterday
Click to expand...
Click to collapse
where do you see a new zimage?
http://cotulla.pp.ru/leo/Android/
just checked and there's none for Aug5?
Other than using the latest zimage and SetCPU to force autoscaling CPU and Conservative CPU Governor, I've noticed Darkstone's vanilla froyo v1 build gives pretty good battery life (vs say, the CM RC1 build) by default.
I've also noticed that I get great standby battery consumption if I ensure that S2U2 is running in the WM background (as iLock2.exe) with the setting "Don't Suspend Power" unchecked in S2U2 options before booting into Android.
On a 3G network with a idle data connection, the (standard HTC) battery only drops 10% for a 10-11 hour standby time.
jjones1983 said:
Sorry, I didn't make that clear. I get 12-15 hours without having to flip on my case. I usually switch it on at around 20%, which is why I said I never let it go below 20%...
Edit: I forgot he asked me which build and zImage as well.
MattC Froyo RC 1.4, 08/03 zImage.
Click to expand...
Click to collapse
You get 12 hours with heavy use? Mind telling us what Radio/Rom you are using? What other settings?
I managed to get to 8.5% per hour drain with normal use.
Of course, I never got better than that with WM anyways...
lol i get about 31 to32 hrs (1hrs mp3 and 30min internet) with light use
I must admit my android battery issues were solved with setcpu and screen brightness tweak.
Only funny thing is that with my setcpu profiles identical between Mattc-froyo and Shub-cyanogen, there is a short delay in the latter's response to a key press once screen is off and device locked. No delay on Mattc.....
So I basically have Stock 2.2 with a lot of the unnecessary apps removed. The other day I installed King's 4th Kernel hoping for better battery performance but in the end it's a little worse. I'm not blaming the kernel for my performance issues. But I'm looking for feedback to get better battery life.
Right now I am not using Set CPU. I just flashed the ROM, wiped the dalvik cache, and decided not to wipe the battery stats. I've been using the #4 kernel for two days now.
I work my phone pretty hard every day and have a good idea of when it's gonna die. I don't bother bump charging but rather replace the battery with a spare I have on hand.
Any recommendations to fix my problem?
Try a different kernel?
Get Set CPU? I'm not interested in overclocking but I realize other features are available.
Wipe the battery stats?
One thing I can say for certain is that I've been using this kernel with my current setup for 2 days now and battery performance is worse. Something definitely needs to be tweaked in my engine because I shouldn't have to use 3 batteries in one day.
Again, I want to reiterate that I know there are a lot of factors that affect battery life. I'm basing my opinion off of my past battery life throughout the day. It's probably not the kernel but how I have things setup. I'm just looking for some direction to extend the life a bit.
The biggest thing to do will be setcpu. Underclocking during screen off and using conservative governor will drastically improve battery life.
I haven't ever had good luck with the King kernels on my phone. Adrynaline's Custom kernel has worked awesome for me though. Took it off the charger at 11am yesterday, used it regularily and didn't charge until today at 3pm and still had 32% battery left. I use SetCPU for underclocking the phone when the screen is off and that seems to be the best way to save battery. I also don't have anything syncing throughout the day besides gmail accounts.
Ok, well I guess I will start with Set CPU. Sounds like it's worth the cash. Maybe I'll try a different kernel at the same time.
Thanks.
Setcpu is available for free to xda forum members. Do a bit of searching around and you'll find the link to the .apk
Grikshanks said:
The biggest thing to do will be setcpu. Underclocking during screen off and using conservative governor will drastically improve battery life.
Click to expand...
Click to collapse
Setting CPU Max at 555 when screen is off took me from 9-14hours to 25-30hours.
Clearing battle stat seems important
I like interactive mode when it seems to be working right. I don't really know what Interactive mode is except that setcpu will show the CPU jumping to differant frequency instead of ramping up like with conservative.
Sent from my ADR6300 using Tapatalk
Jaguox said:
Setcpu is available for free to xda forum members. Do a bit of searching around and you'll find the link to the .apk
Click to expand...
Click to collapse
I knew this and had forgotten. Fortunately, right before I dropped the cash the light bulb came on. I appreciate the heads up anyway.
Has anyone had luck with King's Kernels?
srt4mn, do you have a link to the kernel you are using?
The kernel comes with the Virtuous ROM and can be downloaded as a separate entity from ROM Manager in his area.
FlairDevil said:
The kernel comes with the Virtuous ROM and can be downloaded as a separate entity from ROM Manager in his area.
Click to expand...
Click to collapse
Ok, cool. I'll give it a shot. Is it tweaked to work just with the ROM or is it safe to install in Stock 2.2 as well?
Clambert11- Sounds as if you wrote your post for me. I haven't tried a custom rom or kernel yet but KK was the what I was considering. I do have setcpu running for a couple weeks now with underclocking for screen off, battery under 50%, and battery under 30%. Have noticed a modest improvement, mostly while phone is asleep at night. Not really much difference with day use. I carry a spare battery and charge at every opportunity.
I'll be watching this thread to see how the new kernel works for you. Sounds like it can be installed over the stock 2.2, yes? Does it require a full wipe?
marcmarshall said:
I'll be watching this thread to see how the new kernel works for you. Sounds like it can be installed over the stock 2.2, yes? Does it require a full wipe?
Click to expand...
Click to collapse
I just installed Virtuous Custom Kernel - Version 2 without any issues. All I did was wipe the dalvik cache. I'm still not a firm believer that wiping the battery stats does anything. Now to setup SetCPU... I will report back in a couple days.
I tried bump charging with wiping battery stats a couple days ago. Didn't see any difference.
I be watching for your post. I'm happy with my rooted stock. This phone has more tricks than a $2000 hooker. The battery life is the big problem for me.
In regards to wiping battery stats, here's what I do and what seems to work good for me.
This is best to do when you have times when you wont need your phone to much.
1. Full charge phone while phone is on
2. Leave USB/power cord plugged in and turn power on phone off
3. Wait for the LED to change from orange to green while phone is off, this means you have a full charge.
4. Power on phone to get to recovery
5. Go to advanced > clear battery stats
6. Reboot phone
7. Pull out charge cable once your phone fully boots
8. Fully kill phone battery without plugging it in to USB or power the phone until it dies completely
9. Turn phone back on with charge plugged in after battery fully dies and phone shuts itself off, charge till 100%
I also keep my screen brightness down really low, this seems to help maintain good battery life too.
Those are good detailed directions. I had been wondering about when to plug and unplug. I also never fully discharged the battery. Li bats don't have memory issues so why fully discharge? Is the claim that this effects or resets something in the OS? If so where does this info come from? I wonder if someone pulled it out of his butt and it has become doctrine. Did you really see a difference? Did you try something else like lower screen brightness or setcpu at the same time?
i've been running bfs #4 on stock rooted 2.2 for about a week now. loaded the kernel through clockwork. it's working good for the most part and i've been keeping it mostly at stock speeds. however, i have noticed an occasional lag here and there (that i didn't noticed with the stock kernel) but no reboots or lock ups. i'm going to disable setcpu to see if that has any impact.
marcmarshall said:
Those are good detailed directions. I had been wondering about when to plug and unplug. I also never fully discharged the battery. Li bats don't have memory issues so why fully discharge? Is the claim that this effects or resets something in the OS? If so where does this info come from? I wonder if someone pulled it out of his butt and it has become doctrine. Did you really see a difference? Did you try something else like lower screen brightness or setcpu at the same time?
Click to expand...
Click to collapse
You pose a good question. I myself dont know the source of the battery stat information, and coming from apple products I've been conditioned to not asking questions, but I can claim from experience that wiping the battery stats help the OS more accurately report the battery percentage.
Since I recently reflashed a new rom and kernal, my discharge rates were rather wonky. The first 15% went pretty fast (as they usually do) since I didn't bump charge. Then it remained normal till 50% when it spiked till 20%, then remained normal till 15% where it took forever to diminish.
Wiping the battery stats will help this number be more consistent since (to me) it helps the OS learn about the battery in conjunction to the kernal being used. I'm assuming that this feature exists because we can swap batteries. Ever curious why apple locks their batteries in their devices? If I had to guess it would be to avoid this whole debacle. They only use one type of battery for each device and as such can report battery percentage more accurately. Plus its easier for them to design.
I've gotten sick of bump charging, so I reset my battery stats after charging to full and not bump charging. This should give me a more accurate drop in battery for the first 15%.
This is all information I've gathered through experience. I do not program these devices, so take it for what its worth. If any Li-ion engineers are around here, help!
Sent from my ADR6300 using XDA App
Just an update. I've been running Virtuous for a few days now. I thought I installed Custom Kernel v2 but the System Settings say v1. I'll have to look into that. Kinda odd.
Anyway, I also am using SetCPU, which I think is responsible for most of the savings I have received. I've got the default scaling set to Conservative. Additionally, I have a Screen Off profile of 245 max / 245 min in Powersave and a Battery < 10% profile of 806 max / 245 min in Conservative.
I'm still playing the kernel / SetCPU game for the optimum settings but I've bought another 1.5 to 2 hours of life without feeling any real performance woes. I'm hard on the phone and use it a lot. That's what we have them for, right?
I had issues with King's Kernel #4. My phone, at times, would get real sluggish without even using SetCPU. I may try some of his older kernels or his next kernel (when it's released) to see how it behaves.
Just wanted to touch base. Thanks for the previous input and guidance.
Thanks for the update! I think my greatest savings so far has been from a screen off profile at about 460 max. I also have a 50% and a 30% profile.
I just can't seem to crack the battery life conondrum. I've calibrated (charge to 100%, wipe stats, then full cycle).
If I'm listening to music its consistently I'm sucking ~10% an hour, if idling ~4-5%. Which means I'm getting around same battery life as my old nexus one – mediocre, I end a working day with around 30-40%. If I want to go out after work i have to remind myself to charge during the day...
Right now I'm even running a mild setcpu undervolt (with faux123 kernel) and profile (screenoff max cpu 600mhz) but seeing not much improvement if any.
I am on gingerbread AT&T radio so thats not it either... any tips aside from 'use juice defender' (which I don't want to do as I want always on data instant push etc., I know juice defender basically shuts your data radio off)?
Note this is the same with stock gingerbread as well as the ROM and kernel I'm currently on (redpill, faux123 kernel)
I've done everything you have and i'm on a Bell Atrix....i have been looking into this for about a week or more and i just can't crack it either!!! it's driving me nuts and i have spent sooo many hours googling, searching xda and other sites and have tested MANY different methods and still can't seem to figure it out. For me i know its the phone idle...but what it is i can't tell, i have SystemPanel monitoring as as well as watchdog which i alternate with. Flashed the battery calibration fix and calibrated the meter blah blah blah....driving me nuts and i know its not a faulty battery because before i unlocked and flashed 2.3.4 i could get about 30 hours with heavy to moderate use!!!
For the love of god i wish a team of dev's would look into this!!!!!!!!
Honestly none of the faux kernels worked for me... Try gobstopper, stock kernel with watchdog was the only combo to give me good battery life. Not to mention lock sounds works properly, and its fast. All bell users should use it. Seriously... 19+ hours worth moderate usage.
phone idle is still high but it seems to be a slow drain.
Sent from my MB860 using XDA App
a.) not an option for me, AT&T phone
b.) I'm not seeing faux's kernel do any worse than stock kernel, I don't think its the kernel?
c.) yeah I tried system monitor as well, the highest process was opera at 3%.... 3 lousy percent lol
1. Calibrate your battery again (I have posted a guide in the General section)
2. Flash a kernel which allows overclocking, install SetCpu, add battery saving profiles (downclock to 500mhz on screen off, downclock to 800 mhz when battery less than 30%, downclock to 800mhz if temperature higher than 50C)
3. Freeze all MotoBlur bloatware (there's a guide in the general section)
4. Disable data and wifi unless you need it
5. Install Watchdog and set it up according to instructions I provided in my calibration thread.
xploited said:
1. Calibrate your battery again (I have posted a guide in the General section)
2. Flash a kernel which allows overclocking, install SetCpu, add battery saving profiles (downclock to 500mhz on screen off, downclock to 800 mhz when battery less than 30%, downclock to 800mhz if temperature higher than 50C)
3. Freeze all MotoBlur bloatware (there's a guide in the general section)
4. Disable data and wifi unless you need it
5. Install Watchdog and set it up according to instructions I provided in my calibration thread.
Click to expand...
Click to collapse
all your solutions he basically either already did (1 and 2), or stated he does not want to (#4) =P
dLo GSR said:
all your solutions he basically either already did (1 and 2), or stated he does not want to (#4) =P
Click to expand...
Click to collapse
Well, if you keep data or wifi turned on at all times, then there's no way you can have something more than mediocre battery life, sorry.
It's not the Atrix'es fault, its the brutal truth with all modern smartphones.
1 personally run ninja speed freak, i get amazing battery life. simply amazing, days on worth of battery!
it is not a kernel issue, i simply dont know exactcly what hack in particular gives ninja the amazing battery life. but im working hard to determing this so i can share it.
samcripp said:
1 personally run ninja speed freak, i get amazing battery life. simply amazing, days on worth of battery!
it is not a kernel issue, i simply dont know exactcly what hack in particular gives ninja the amazing battery life. but im working hard to determing this so i can share it.
Click to expand...
Click to collapse
Perhaps, bypassing MotoBlur sign in
I'm not signed into motorblur either.
I do turn off wifi when out, but bluetooth is normally on.
Sent from my MB860 using Tapatalk
wintermute000 said:
I'm not signed into motorblur either.
I do turn off wifi when out, but bluetooth is normally on.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
The people in this thread have listed all known steps to improving battery life.
If you really follow all of these guidelines and have bad battery life, you might want to try a battery replacement.
If you are sure your battery is not the problem, you might also want to try a couple of custom roms. Who knows maybe you will get lucky with one of them.
xploited said:
Perhaps, bypassing MotoBlur sign in
Click to expand...
Click to collapse
Is there any way to log off from motoblur once you are in so you can stay offline? Of course any connection that gets cut will increase battery life.
I don't understand all these battery life problems. Its got to be an app you are installing or your battery is buggered!
Admittedly when I first installed 2.3.4 OTA, battery life dropped like a stone, but I drained it flat, and then charged it up again and its been fine ever since.
I'm running on stock 2.3.4 without root, and I have quite a lot going on (IM's/Facebook/Twitter) and I can last well over a day and a half with moderate use, this includes sms and calls.
tehrules said:
I don't understand all these battery life problems. Its got to be an app you are installing or your battery is buggered!
Admittedly when I first installed 2.3.4 OTA, battery life dropped like a stone, but I drained it flat, and then charged it up again and its been fine ever since.
I'm running on stock 2.3.4 without root, and I have quite a lot going on (IM's/Facebook/Twitter) and I can last well over a day and a half with moderate use, this includes sms and calls.
Click to expand...
Click to collapse
Battery life is a very subjective issue. One person might be fine with the phone, while the other person will say battery life is terrible with the very same phone.
Besides the obvious drainage problems, it all depends on how you use the phone.
Honestly the best thing that worked for me was turning off "Syncing".
I currently have 3G on, BT on, ETC...
Syncing in the background killed my battery life. Now I usually make it through the day without the need for a top-off...
Sent from my MB860 using XDA Premium App
Im in stock gingerbread and battery life is definitely worse than on stock 2.2.2 and and im basically running the same Apps. I am a heavy user and I used to drop 10% per hour. Switch on at 7am and by 5pm I was changing battery. Now I am switching around 3pm.
That's why I have 3 batteries!
I still think its better than nearly every other device I have owned but that nay be because battery is larger. I dont know why they don't design to put in 2400 mah batteries (my treo 650 had one!).
Sent from my MB860 using XDA App
ekerbuddyeker said:
Im in stock gingerbread and battery life is definitely worse than on stock 2.2.2 and and im basically running the same Apps. I am a heavy user and I used to drop 10% per hour. Switch on at 7am and by 5pm I was changing battery. Now I am switching around 3pm.
That's why I have 3 batteries!
I still think its better than nearly every other device I have owned but that nay be because battery is larger. I dont know why they don't design to put in 2400 mah batteries (my treo 650 had one!).
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
The treo 650 also had a thickness double that of the Atrix .
The batteries in your phone are high-capacity lithium-ion batteries. This kind of battery technology cannot be simply reset and “re-calibrated.” When you follow the steps to recalibrate your battery and delete the batterystats.bin file from your phone, you are getting rid of more than what you think… Stored inside that batterystats.bin file, your phone keeps detailed logs of the capacity of your battery and uses it on how it can be utilized more efficiently. By deleting this file, it basically wipes the phone’s memory on what the battery can really do. This actually does damage to your battery by using up valuable charging cycles, all while giving a fraction of battery life and performance.
Now, you might be saying uh-oh, I’ve already re-calibrated my battery! What do I do?!
Well here’s your answer. Use your phone like normal. Yes, your battery and phone wont perform as good as it can for a while, but after a few days, you will notice that it starts doing better and better. Give it time, its trying to rebuild all those logs that you just deleted.
edgeicator said:
The batteries in your phone are high-capacity lithium-ion batteries. This kind of battery technology cannot be simply reset and “re-calibrated.” When you follow the steps to recalibrate your battery and delete the batterystats.bin file from your phone, you are getting rid of more than what you think… Stored inside that batterystats.bin file, your phone keeps detailed logs of the capacity of your battery and uses it on how it can be utilized more efficiently. By deleting this file, it basically wipes the phone’s memory on what the battery can really do. This actually does damage to your battery by using up valuable charging cycles, all while giving a fraction of battery life and performance.
Now, you might be saying uh-oh, I’ve already re-calibrated my battery! What do I do?!
Well here’s your answer. Use your phone like normal. Yes, your battery and phone wont perform as good as it can for a while, but after a few days, you will notice that it starts doing better and better. Give it time, its trying to rebuild all those logs that you just deleted.
Click to expand...
Click to collapse
This is the first time I am reading this sort of opinion, though I have read countless info on the subject.
If you want to make such a strong point, you better have source to back up your opinion (article, studies, other source of proof, etc).
These threads are all USELESS without NUMBERS.
Like another person with common sense already stated in this thread, you need to provide numbers.
GB has this improved tool (over 2.2) where you can see how your battery is wasting its juice. Watch those numbers for a few charges and then POST THEM TO COMPARE.
Saying your battery sucks without giving any numbers is like calling a color ugly.
(just in case someone misses the points, without numbers it's hard to compare, since it mainly becomes an opinion at that point)
P.S.- Please don't post "My battery lasts for over 9000 hours." and think that's enough info. Use your head.
First and foremost this guide is based around the Sprint Nexus S 4G. If you do not have the Nexus S 4G, Than this guide will probably not help you. =)
Secondly all credit goes to the wonderful people that work endlessly to make these wonderful Roms and Kernels. Without you guys Android wouldn't be what it is today!
Third: Please make a back up and use this guide at your own risk. I don't want to bare the weight of someone turning their phone into a paperweight by using this guide.
Alright, Now lets get to the fun part.
Case you've already forgotten why you're ready this topic. This is my rough how-to guide on getting easily over 2 days out of a single charge on your phone, Very much possible to push 3 or more days depending on use and other varying factors.
What you're going to need to start:
- Rooted Nexus S 4G with a custom recovery like Clockwork mod.
- Flash the following Rom http://forum.xda-developers.com/showthread.php?t=1417499
- Flash the following Kernel http://forum.xda-developers.com/showthread.php?t=1436313
-Flash the following "KL2" Radio update http://forum.xda-developers.com/showthread.php?t=1077168
After you have flashed all the above and confirmed your phone is running stable with all the default settings. Charge your phone to 100% and reboot back into recovery, and WIPE YOUR BATTERY STATS
Now. Lets begin configuring your rom and kernel!
- Install CPU MASTER FREE from the android market https://market.android.com/details?id=com.antutu.CpuMasterFree&hl=en
Set the following on CPU Master
- CPU Speed 800 MAX and 100MIN
- CPU Governor CONSERVATIVE
- and Scheduler set to CFQ
- Make sure to click apply on boot as well
- Now Install NSTOOLS from the Android market https://market.android.com/details?id=mobi.cyann.nstools&feature=search_result
Set the following on NSTOOLS
- DEEP IDLE: ENABLED
- Backlight Dimmer: ENABLED
- Make sure Backlight Notifications are left disabled. It keeps phone from idling properly.
- Leave all other settings alone and make sure to check set on boot
- Now lastly install Antutu Battery Saver from the Android Market
https://market.android.com/details?id=com.antutu.powersaver&feature=search_result#?t=W251bGwsMSwxLDEsImNvbS5hbnR1dHUucG93ZXJzYXZlciJd
Activate Battery Saver and set to level 2 battery save. Easy as that.
Basically your done! =)
If you notice your phone has a slightly worse or little to no improvement on the battery this is due to you deleting your battery stats. As you use your phone it will write new stats and you will begin to notice a difference after a few cycles. Just make sure your battery is charged when you wipe them, Let the phone run almost completely dead. Plug it up, Let it charge back to 100%, Unplug it. Rinse and repeat. Just be sure to unplug it when you notice it's fully charged even if you don't plan on going anywhere. Just let it sit and run on battery so that it calibrates the battery stats while it's idle as well.
Now as you should already know your battery life is going to heavily depend on use and SIGNAL STRENGTH. It seems a lot of people don't realize the more signal you have the longer your battery will last. If you're in an area with very low signal it can kill your phone in a matter of hours.
I have attached a screen shot of my battery life using this above method. Other settings I will mention
- WIFI ENABLED and CONNECTED
- Bluetooth and NFC DISABLED
- Automatic backlight control enabled
- Facebook notifcations, Weather and Contacts are the only things set to SYNC on my phone.
- Usage: Light to moderate. This includes a few texts throughout the day. A few phone calls, and a brief checking of facebook every now and then.
If I'm missing anything I will update this post. That is all for now. Happy modding and may this tutorial work the same wonders for you as it did me.
Also I should state that the phone finally died at around 2Days 17hrs on battery. My goal for 3 straight days was cut short after a few 30 minute phone calls and other work I had to do on the phone.
If you have any questions. Feel free to post, or PM me. I'll be here =)
cwayn1989 said:
First and foremost this guide is based around the Sprint Nexus S 4G. If you do not have the Nexus S 4G, Than this guide will probably not help you. =)
Secondly all credit goes to the wonderful people that work endlessly to make these wonderful Roms and Kernels. Without you guys Android wouldn't be what it is today!
Third: Please make a back up and use this guide at your own risk. I don't want to bare the weight of someone turning their phone into a paperweight by using this guide.
Alright, Now lets get to the fun part.
Case you've already forgotten why you're ready this topic. This is my rough how-to guide on getting easily over 2 days out of a single charge on your phone, Very much possible to push 3 or more days depending on use and other varying factors.
What you're going to need to start:
- Rooted Nexus S 4G with a custom recovery like Clockwork mod.
- Flash the following Rom http://forum.xda-developers.com/showthread.php?t=1417499
- Flash the following Kernel http://forum.xda-developers.com/showthread.php?t=1436313
-Flash the following "KL2" Radio update http://forum.xda-developers.com/showthread.php?t=1077168
After you have flashed all the above and confirmed your phone is running stable with all the default settings. Charge your phone to 100% and reboot back into recovery, and WIPE YOUR BATTERY STATS
Now. Lets begin configuring your rom and kernel!
- Install CPU MASTER FREE from the android market https://market.android.com/details?id=com.antutu.CpuMasterFree&hl=en
Set the following on CPU Master
- CPU Speed 800 MAX and 100MIN
- CPU Governor CONSERVATIVE
- and Scheduler set to CFQ
- Make sure to click apply on boot as well
- Now Install NSTOOLS from the Android market https://market.android.com/details?id=mobi.cyann.nstools&feature=search_result
Set the following on NSTOOLS
- DEEP IDLE: ENABLED
- Backlight Dimmer: ENABLED
- Make sure Backlight Notifications are left disabled. It keeps phone from idling properly.
- Leave all other settings alone and make sure to check set on boot
- Now lastly install Antutu Battery Saver from the Android Market
https://market.android.com/details?...1bGwsMSwxLDEsImNvbS5hbnR1dHUucG93ZXJzYXZlciJd
Activate Battery Saver and set to level 2 battery save. Easy as that.
Basically your done! =)
If you notice your phone has a slightly worse or little to no improvement on the battery this is due to you deleting your battery stats. As you use your phone it will write new stats and you will begin to notice a difference after a few cycles. Just make sure your battery is charged when you wipe them, Let the phone run almost completely dead. Plug it up, Let it charge back to 100%, Unplug it. Rinse and repeat. Just be sure to unplug it when you notice it's fully charged even if you don't plan on going anywhere. Just let it sit and run on battery so that it calibrates the battery stats while it's idle as well.
Now as you should already know your battery life is going to heavily depend on use and SIGNAL STRENGTH. It seems a lot of people don't realize the more signal you have the longer your battery will last. If you're in an area with very low signal it can kill your phone in a matter of hours.
I have attached a screen shot of my battery life using this above method. Other settings I will mention
- WIFI ENABLED and CONNECTED
- Bluetooth and NFC DISABLED
- Automatic backlight control enabled
- Facebook notifcations, Weather and Contacts are the only things set to SYNC on my phone.
- Usage: Light to moderate. This includes a few texts throughout the day. A few phone calls, and a brief checking of facebook every now and then.
If I'm missing anything I will update this post. That is all for now. Happy modding and may this tutorial work the same wonders for you as it did me.
Also I should state that the phone finally died at around 2Days 17hrs on battery. My goal for 3 straight days was cut short after a few 30 minute phone calls and other work I had to do on the phone.
If you have any questions. Feel free to post, or PM me. I'll be here =)
Click to expand...
Click to collapse
I thought it was the More Bars you have the more Data Kills Your Battery... but sprints 3G sucks .. some users only experience a .5kbs to 1.0 Mbs (if your lucky) ... that being said I think that's why your battery lasts longer. But then again I'm on Wifi so my battery has lasted all day ^_^ 15% left. Nfc on , Bluetooth off , screen at 50% brightness and heavy usage. Buuuut in your screen shot below your on 3G ... the 2 days.. was it always on Wifi?
- Google
What is your screen on time?
I don't use any "power-saving" apps, just AOKP Milestone 2 with Steve Garon's 1.14 kernel to run 50hrs with nearly 4hrs of screen time.
100/1100mhz, interactive governor, standard voltage, bln/bld on, wifi used whenever available. It doesn't help that my office is in a poor signal area - battery life would be much better if the signal reception bar stayed green all the time.
Sent from my Nexus S 4G using xda premium
iGoogleNexus said:
I thought it was the More Bars you have the more Data Kills Your Battery... but sprints 3G sucks .. some users only experience a .5kbs to 1.0 Mbs (if your lucky) ... that being said I think that's why your battery lasts longer. But then again I'm on Wifi so my battery has lasted all day ^_^ 15% left. Nfc on , Bluetooth off , screen at 50% brightness and heavy usage. Buuuut in your screen shot below your on 3G ... the 2 days.. was it always on Wifi?
- Google
Click to expand...
Click to collapse
Screen time out is on 30 seconds. and Wifi was connected virutally through the entire time, exception was when I visited a friends house which is why in the screenshot it does not say it's connected, However it was still active.
Braneless said:
What is your screen on time?
I don't use any "power-saving" apps, just AOKP Milestone 2 with Steve Garon's 1.14 kernel to run 50hrs with nearly 4hrs of screen time.
100/1100mhz, interactive governor, standard voltage, bln/bld on, wifi used whenever available. It doesn't help that my office is in a poor signal area - battery life would be much better if the signal reception bar stayed green all the time.
View attachment 912363View attachment 912364View attachment 912365
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Those are very nice stats, Question, On your battery log, What are the massive drops in battery from? low signal or just heavy use on your phone?
Also I believe I'm going to go back an retry my experiment with SmartassV2 governor and On Demand. because I recently read they are better than conservative.
By all means play around with these settings and if you report back something I can approve on I will be happy to update this post and give credit to whoever finds more tricks to improving the battery life even more =)
cwayn1989 said:
Those are very nice stats, Question, On your battery log, What are the massive drops in battery from? low signal or just heavy use on your phone?
Also I believe I'm going to go back an retry my experiment with SmartassV2 governor and On Demand. because I recently read they are better than conservative.
By all means play around with these settings and if you report back something I can approve on I will be happy to update this post and give credit to whoever finds more tricks to improving the battery life even more =)
Click to expand...
Click to collapse
They're from heavy use, probably angry birds or web browsing. The poor signal usually results in much slower drain.
Sent from my Nexus S 4G using xda premium
Braneless said:
They're from heavy use, probably angry birds or web browsing. The poor signal usually results in much slower drain.
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Not saying you're wrong, but based on past experience when I lived in an area where my phone was constantly losing and gaining signal or especially switching between Verizon (Roaming) and Sprint to find a signal, My phone would get very warm and it would cause massive battery drain.
Also in regards to the Sprints 3G speed.
Here in town where I live now, with the new KL2 radio
Edit:
I have attached screenshots of 3G speeds. It seems today when I ran the test the speeds aren't that special, I guess it all depends on network load.
Braneless said:
What is your screen on time?
Click to expand...
Click to collapse
This ^
I can get about 4-5 hrs on screen-on time a day with a full charge before it dies. I couldn't imagine spreading that amount of time over three days unless I was travelling again or something lol
Sent from my Nexus S 4G using Tapatalk
kyouko said:
This ^
I can get about 4-5 hrs on screen-on time a day with a full charge before it dies. I couldn't imagine spreading that amount of time over three days unless I was travelling again or something lol
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
Haha yeah sorry about that guys, That could have been helpful for me to post, but I actually just now realized you could view your screen on hours by clicking it. I feel about stupid now.
After I tweak some more settings and do this little experiment again I'll be sure to actually include that, Seeing as it would have been helpful LOL
Braneless said:
What is your screen on time?
I don't use any "power-saving" apps, just AOKP Milestone 2 with Steve Garon's 1.14 kernel to run 50hrs with nearly 4hrs of screen time.
100/1100mhz, interactive governor, standard voltage, bln/bld on, wifi used whenever available. It doesn't help that my office is in a poor signal area - battery life would be much better if the signal reception bar stayed green all the time.
View attachment 912363View attachment 912364View attachment 912365
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
How do you get your phone to idle so well? I can never get the battery stats to flatline like that. Could it be due to me having BLN turned on as the OP said that causes an idle bug?
tycruickshank said:
How do you get your phone to idle so well? I can never get the battery stats to flatline like that. Could it be due to me having BLN turned on as the OP said that causes an idle bug?
Click to expand...
Click to collapse
There's a possibly you're running an app in the background that's preventing your phone from deep idling. Also try the battery saving app I mentioned in the post as well. It works wonders for some, and others don't notice difference. There's a lot of varying factors.
Have you wiped your battery stats and calibrated your battery with the method I mentioned above? Also you can check to see if your phone is deep idling by going into NSTools and clicking Idle stats.
If you see that your idle numbs are higher than your deep idle stats, Than yes, Something is preventing you're phone from doing so, and I would recommend disabling BLN and seeing if that fixes it.
It could be an issue with BLN and it may not be. My entire post is basically the steps and settings I've figured out and tweaked on my own to achieve maximum battery. I've read around and it seems some others have used BLN without any noticeable difference in battery at all. I guess it really just depends.
Also to the other post, The main reason I run my phone unclocked is basically, in use, I prefer the CPU to be at the lowest max speed possible, while remaining smooth, and I've noticed no lag at 800max, So therefor even when I'm using my phone it's still not going to be pulling as much power as if lets say I had it set to 1000 or 1100. Overclocking is great, Don't get me wrong, but unless you're doing something heavy like gaming or a sheet ton of crazy multitasking, I don't really think it's worth it. That's just my opinion though =)
So you're at home all this time? Then why go through all this trouble and handicapping of features and performance? Why not just plug it in?
jesusice said:
So you're at home all this time? Then why go through all this trouble and handicapping of features and performance? Why not just plug it in?
Click to expand...
Click to collapse
How exactly am I handicapping? I had people asking me how I was getting my battery life and wanted me to post up details on it, so I decided I would. I run an underclocked phone because like I stated in my previous post, I don't see the point in running a overclocked phone unless you're going for benchmarks or doing a lot of heavy multitasking and then by all means, Take the 5 seconds to change your max CPU speed. If you're referring to me not running BLN, That's because for some, including me it keeps your phone from idling and will cause battery drain. It works fine for some, others it doesn't. I'm SURE it's a problem on my end, but until I get it worked out I'm just leaving it off for now.
I've been learning about rooting and modding since the Sprint HTC Hero days. I'm far from a professional and will be the first to admit I'm an amateur compared to you guys, I cannot develop, I cannot code. I'm simply wrote this guide as a reference point for people wanting to get good battery life, That's why I said tweak with the settings and have fun.
The main reason I'm so ecstatic about the battery life, is up until now I've barely been able to get a days normal use out of an android phone even running custom roms and all that good stuff. Now I can actually use my phone throughout the day, Throw it on my dresser at night, and wake up the next morning with still enough charge to use it again without having to worry about plugging it up every night.
Home or not, this info can prove to be very useful depending on an individual's circumstance. I work multiple jobs and when I get home, sometimes I'm so tired I don't even bother to fiddle with my phone's charging cable and just crash on my bed. I've gotten great battery life using similar tactics (went to bed with a 13% charge once, woke up with the thing still alive and kicking), so again, some may find this extremely helpful. Good work!
zeigan said:
Home or not, this info can prove to be very useful depending on an individual's circumstance. I work multiple jobs and when I get home, sometimes I'm so tired I don't even bother to fiddle with my phone's charging cable and just crash on my bed. I've gotten great battery life using similar tactics (went to bed with a 13% charge once, woke up with the thing still alive and kicking), so again, some may find this extremely helpful. Good work!
Click to expand...
Click to collapse
Thank you kind sir. I'm glad you were able to find this poorly formatted guide useful! =D
Battery Optimization Discussion Thread
CM9 beta: Android 4.0.3 for Samsung Epic 4G
This thread is ONLY to discuss issues related to power management and battery life on CM9 on the Epic 4G. Battery tips are regularly summarized in the official Battery Optimization Guide. Please read the guide before posting to this thread.
CM9 Discussion Threads
User Support, Questions & Answers Thread
Battery Optimization Discussion Thread
Tips & Customization Discussion Thread
Development Discussion Thread
its good practice to save battery to turn refresh interval for apps that access the web for updates such as social media, new readers, etc to manual to help save battery life as most of these apps refresh on a pretty regular interval and defiantly eat up alot of battery
If you notice especially high battery drain and recently used your GPS or Camera they can occasionally stay on with no visible signs. Also please remember the battery stats is HIGHLY inaccurate. A Phone reboot usually fixes this.
Never keep apps like Skype, IRC, etc that stay running and keep your CPU on they drain battery especially fast!
One big battery saver is to not wake your phone to just check the time. Let the CPU stay in deep-sleep as long as possible to preserve power until you actually need your phone for something.
One MAJOR thing to save power is DO NOT MESS WITH CPU SETTINGS!
Do not use 3rd party apps like Voltage Control or SetCPU or even the built in Performance settings as modifying the settings will increase the minimum clock to 200MHz which will greatly reduce battery life than NOT messing with them. This is a known issue and will be addressed in a future release!
dyehya said:
One MAJOR thing to save power is DO NOT MESS WITH CPU SETTINGS!
Do not use 3rd party apps like Voltage Control or SetCPU or even the built in Performance settings as modifying the settings will increase the minimum clock to 200MHz which will greatly reduce battery life than NOT messing with them. This is a known issue and will be addressed in a future release!
Click to expand...
Click to collapse
If you DO decide to run a custom kernel, (NOT, I repeat NOT recommended or supported by CM9 devs) I'd suggest Control Freak. I ended up with a 200mhz min, and with that app managed to get deep sleep and 100mhz back. WITH uv and some minor oc. My battery life is great.
Head on over to the app thread here: http://forum.xda-developers.com/showthread.php?t=1072403
Another thing that can save battery, Screen Filter from the Market (Play Store now I guess) can dim our screens lower than the lowest stock increment. Useful for dark environments. (Movies, night outside etc.)
This should be obvious, and has been stated already, but it bears repeating: TURN OFF DATA AND ALL OTHER MODEMS if you're not using them.
Thanks to all the devs and everyone who contributes.
YES!!! It seems a little bit more snappy or is it just me?
And thanks for the advice not to run custom kernels...
Without a doubt, the biggest battery saver for me, is to turn off data until I want to use it.
I simply cannot believe the difference. Makes me think I'm gonna have to go out and get Juice Defender, and let it turn off data when I put the phone to sleep, it is just that dramatic.
I can call text, and play hours of games, and still have the battery have more juice remaining than it did over the same timeframe with just a call or two for usage with the data on.
tabormeister said:
Another thing that can save battery, Screen Filter from the Market (Play Store now I guess) can dim our screens lower than the lowest stock increment. Useful for dark environments. (Movies, night outside etc.)
Click to expand...
Click to collapse
Rather than installing an additional app to control brightness, why not just tweak the settings yourself?
System Settings / Display / Automatic Backlight
Check "Use custom" and set a lower Screen dim level. Use "Edit other levels..." to adjust the steps for auto brightness if you use that feature.
This is a fantastic feature if you use the phone in low light conditions.
DCRocks said:
Without a doubt, the biggest battery saver for me, is to turn off data until I want to use it.
I simply cannot believe the difference. Makes me think I'm gonna have to go out and get Juice Defender, and let it turn off data when I put the phone to sleep, it is just that dramatic.
I can call text, and play hours of games, and still have the battery have more juice remaining than it did over the same timeframe with just a call or two for usage with the data on.
Click to expand...
Click to collapse
This first and foremost for me.
I took my phone to a basketball game the other night and turned data off. From when I left work to when I got home was about 7 hours, and I didn't plug in for another few hours later and still had some juice. Compare this to last night when I went to class and had my phone in my pocket with 4g on for a few hours, I arrived home and my phone died 15 minutes later. Total time elapsed, 3 hours 46 minutes.
Particularly 4G data is offensive in it's battery consumption.
I have also found that putting the display on Auto Brightness saps my battery. I just adjust it whenever I need to, keeping it on the lowest setting most of the day since I'm inside a lot.
The mmc_delayed_work and deleted_wake_locks are driving me crazy. I know they've been reported as "false blames," but something, whether MMC or otherwise, definitely causes seemingly unnecessary wake locks, and there is a very clear pattern between high report percentage and battery drain.
I don't mean to take away from the optimizations suggested; they're definitely useful if you're looking to stretch the battery life out longer than typical stock capability. But for many of us, something wakes the phone a little too often, and it's very difficult to debug without disabling every single application and testing one at a time.
I guess the point is, has anyone else found a better way to figure out these wake locks?
Why is awake time in Android OS always more than double the display on time? That sounds like serious wake locks. What can I do to reduce that?
Sent from my SPH-D700 using xda premium
Don't overlook the AudioOut_1 wakelock. Its my number one offender at the moment.
Minimize it by turning off screen selection sounds... System Settings / Sound / Touch sounds.
We need to figure out what the problem is with that.
On the good side, my mmc and deleted wake locks are negligible so far on beta.
Liner81 said:
Don't overlook the AudioOut_1 wakelock. Its my number one offender at the moment.
Minimize it by turning off screen selection sounds... System Settings / Sound / Touch sounds.
We need to figure out what the problem is with that.
On the good side, my mmc and deleted wake locks are negligible so far on beta.
Click to expand...
Click to collapse
Same for me. Think due to notification sounds mostly.
muyoso said:
Same for me. Think due to notification sounds mostly.
Click to expand...
Click to collapse
That's probably right. The only time I ever see that is playing music without headphones. I almost always have my phone on vibrate
Sent from my SPH-D700 using xda premium
I get 39 minutes for vbus_present in the 6 hours since unplugged.
Sent from my SPH-D700 using xda premium
Just want to say THANK YOU for this thread, and THANK YOU for such am awesome rom.
If I might be so bold to suggest, put a section on your page for "If you get worse battery life on this rom than your last rom, it may not be because of a problem with this rom, it may just be that way and there may be nothing that can be done about it because that's just the way it is."
I have had no problems with battery life, fwiw.
Sent from my SPH-D700 using XDA
"Without a doubt, the biggest battery saver for me, is to turn off data until I want to use it."
Agreed... Right now 25%, 8 days 8 hours, 3 h 37 m awake, screen on 1 h 43 m
XXCoder said:
"Without a doubt, the biggest battery saver for me, is to turn off data until I want to use it."
Agreed... Right now 25%, 8 days 8 hours, 3 h 37 m awake, screen on 1 h 43 m
Click to expand...
Click to collapse
8 days? Airplane mode? Or is your battery over 9000....mah?
Sent from my SPH-D700 using xda premium
XXCoder said:
"Without a doubt, the biggest battery saver for me, is to turn off data until I want to use it."
Agreed... Right now 25%, 8 days 8 hours, 3 h 37 m awake, screen on 1 h 43 m
Click to expand...
Click to collapse
Pics or it didn't happen! And here's a battery tip. Don't install facebook or messenger. Ever.
Sent from my SPH-D700 using Tapatalk
Just spend a day with CM9 Beta 0. It's a great rom with lots of promise. Great feel and look, very fast, ICS is fantastic.
That said, the battery life is not there yet. I basically set it up the same way I set up the stock rom. Email on Exchange push notification, EVERYTHING ELSE on manual sync. On a stock rom I usually am at about 40% after 12 hours of moderate use. About 5% drop an hour. On this rom I was at 75% after 2 hours. About 12% an hour. This is with the "stock" 1800 mAh battery.
If the devs can match the battery life of stock GB I'll be back. It really is a great rom, I just can't recharge twice a day, and I'm not carrying around a 3500mAh battery in my pocket either.
Seriously, great work to all the devs who have taken it this far. Looking forward to the next couple releases.
DCRocks said:
Without a doubt, the biggest battery saver for me, is to turn off data until I want to use it.
I simply cannot believe the difference. Makes me think I'm gonna have to go out and get Juice Defender, and let it turn off data when I put the phone to sleep, it is just that dramatic.
I can call text, and play hours of games, and still have the battery have more juice remaining than it did over the same timeframe with just a call or two for usage with the data on.
Click to expand...
Click to collapse
I use JD for this and run it in extreme mode, which disables data until you physically enable it yourself (and after you enable it, it will disable again when the screen is off). Using it, I get a huge improvement in battery life, especially on CM9. It's kind of annoying having to enable it everytime you turn the screen back on, especially since it takes 4-5 seconds before data works again, but if it can give me the type of battery life it does, I am all for it. Other than the slightly noticeable lag I get compared to CM7 and other ROMs such as CleanGB (I know I can install supercharger, but I am talking pure stock CM9 here), I have no problems at all. Major props to all the developers involved for breathing new life into our OG Epics.