i need a main camera for my htc tytn ii as well as pfc connector ribbon as my camera is dead as well as pfc connector ribbon has been damaged due to frequent use of sliding of hardware keyboard.
please suggest from where i can buy it.
my location is delhi, india
Related
Hello there, with placing my keyboard part in a new housing i damaged the flexible circuit of it, now some keys dont work anymore.
I was looking everywhere to buy a broken herald or wing so i can take the keyboard from that one. I cant find the keyboard circuit as a part on ebay or webstores.
Maybe anyone on this board has a herald with broken lcd or defect hardware except the keyboard hardware?
Any help or suggestions will be appreciated!
Recently I had to glue part of the facing that came off of my housing that covered the front camera. Accidentally some of the glue drip down on the front keypad and got onto the button board underneath it. The left side of keypad started not to work. I disassembled the phone and notice that the D/thumb keypad had adhered to the button board. After separating the keypad from the board, part of the backing that holds the circular metal contacts to the board came off.
Does anyone know where I could get that backing for the button board or where to purchase a replace button board that fits the T-Mobile MDA Vario II?
I'll describe everything from scratch so you'll know what the problem is. So, I had 2 MDA Vario II, both developed a fault (on one when I pressed the button on na hardware keyboard it showed two letters on the screen instead, on the other the backlight under a couple of letters stopped working) so I dissasembled them and out of two faulty, I had one working and one working so-so.
As I wanted the other one to be sorted (the connector to the hardware keyboard was burned in some places on the mainboard and the keyboard tape connector as well), I was shopping for some faulty ones on eBay and yesterday I bought an original TyTN with LCD screen not working. I dissasembled both of them and connected the full LCD fascia with the screen to the mainboard of the TyTN (so that now I've got the LCD housing from T-Mobile, but the rest from HTC) and everything is working perfectly... however I'd like to use TyTN only housing and possibly buy a new one on eBay (but keys on the bottom are different for Vario II and TyTN).
I do know that LCD screens are incompatible, in the TyTN I have the HITACHI and in Vario I got the TOPPOLI (however the whole thing works with the mainboard, as both of them have the same product codes)...
But does someone know if I put the whole LCD from the Vario including the tape and top buttons in the fascia of the TyTN and connect it to the bottom buttons circuit, it will actually work. I will do it anyway, but if someone was doing it in the past that would motivate me to fiddle with it tomorrow
Sorted.
For all those with NOT working LCD screens/keyboards/mainboards...
As I the LCD screens are not compatible and we often do not know what we are going to get off eBay, lots of people face the problem of buying something that may not work with their version.
I needed the mainboard and the keyboard in my Vario II (HERM300) and I bought HTC TyTN (the original one, HERM200) with not working LCD (backlight working but nothing could be seen on the screen). As you may be aware that TyTN has got an extra button for 3G and Vario II not, I was wondering whether the whole thing would work. I replaced the full LCD screen with the tape including the two top buttons and connected it to the bottom circuit of the original TyTN. After assembling everything back, I switched it on and it's working without any problems. So if you have the same problem and can get hold of a cheap Hermes for spares on eBay, as long as you replace the whole lcd with tape it'll work regardless of your version...
Useful info thanks. That question was asked before and I don't think anyone gave an answer. Good to know it will work despite the different button layout.
cheers
Mike
Hallo,
The backcover of my HD2 was damaged. So i ordered an nieuw backcover and i replaced. Now i have no speeker and no gps. Can somebody tell me where this is on the mailboard. Is the problem maybe the metal plates under the screws.
Please help=
There's a thread on HD2 disassembly if you search around. Check this link out though http://www.youtube.com/watch?v=cL-jnUKufC4. You can see how the hardware is laid out and see what may be damaged
Check to see if your gps (white) coxial cable is loose and if your speaker is plugged in (top of the motherboard, next to the flash/camera assembly and vibrator.
Trying to find an LCD/Digitizer with Frame for my phone. I can't seem to clear up whether it matters what model I look at for parts.
Looking at a bundle of parts that include LCD Screen, Digitizer Touch Screen, Front Housing, Front Facing Camera, Earphone Jack with Ear Speaker Flex Cable Ribbon, Charging Port Flex Cable Ribbon, Signal Wire Vibrating Motor and Power Button Flex Cable Ribbon.
All of these are for the N9005.
Does anyone know if these will work with the Canadian model? Alternatively I could just get the LCD/Digitizer with housing for the same model, or any US model.
nuttin?