I have yet to buy a internet adapter for my Axim X51 and have not found one around the house yet. I've read multiple times on the internet that you can connect the Axim X51 to a bluetooth enabled phone and use the internet connection through there. I pair the two devices up, and when I go to 'select' services I have nothing to choose from. I can't make a new incoming/out going port on either of the for some reason.
I'm looking to find out how (if) I can set these two up so I can use internet on my Axim x51
Any help is appreciated,
Thanks
- NickolasM.
Related
Dear all,
I've tried almost everything to make a LAN bluetooth network, but no luck so far.
I've paired up my PDA with my PC, but at the end of the wizard I can't select any services, although I have a bluetooth network connection available in 'network connections'.
Is there some driver I need to install first ? I've heard something about 'PAN' for bluetooth wich is necessary for the use of internet over bluetooth ??
Can anyone help me how to do this ??
Oh yeah, I haven't got a XDA based PDA, but a DELL Axim X50v with windows mobile 2005, but i guess this is a general question wich is valid for all types of PDA's ?
Thanks in advance
the ms bluetooth stack dont support PEN
vidcomm does
or you can just connect to activesync then your pda
have the same network access as your pc unless you have
it disabled that is
I've already found the answer. (finally fieuw)
Now I can synchronize AND surf the internet through Bluetooth !!
http://axim.dpicts.com/
Hi,
I hope I am posting in the right forum, but I didn't find a forum for the Charmer (MDA Compact II) PDA phone. So, I am posting here, because I noticed that there are many threads here about Charmer, but If there is any place where my problem fits better, please inform me about it.
So, is there any way to set up a wireless TCP/IP network between PC and Charmer (obviously, over bluetooth, Charmer doesn't have Wifi)? After 2 days of massive googleing and reading various threads, I figured out that my Charmer shipped with microsoft bt stack, witch is not support PAN. On the Magician, there is a solution, it is possible to replace the bt stack with another one, or expand the functionality (I don't know too much about the technical details) to support PAN. On the Prophet, the problem easily can be solved with Wifi.
But what about the Charmer? I cannot find any working hack to replace the bt stack.
Activesync works over bt, but there is no TCP/IP. If connect through USB cable, TCP/IP network appears.
I'm really disappointed, and plan to sell my 1 week old Charmer because of this problem. Any comments, tips or tricks are welcome.
Thanks in advance
go into my network places, view network connections. you should be able to use the 'bluetooth network connection' to establish a network between the two but ive just tried it on mine and it doesnt work, guess the charmers stack doesnt support it. i know this is the right way to go about doing it as i can set up a network between my pc and laptop.
Yap dave, I did exactly the same, under network connections/bluetooth network connection I cannot add my ppc, becouse it says that it doesn't support PAN. That's why I need to replace the ms bt stack, wich is a garbage. As I figured out the last days, nobody have succesfully did this scenario yet.
Any solution?
I still don't have the solution for replace the BT stack on Charmer which supports PAN.
Any ideas?
When you connect to PC via ActiveSync (via Bluetooth) your ppc got address 192.168.55.101 and pc got address: 192.168.55.100
Hi,
I've a SE K610i and a magician.
As I am using my K610i for 3G service, I was trying to pair it with my magician. Apparently, i can paired both of the device. However, when I'm trying to initiate the dialing from my magician, it doesn't seems to connect to the phone to dial it. Basically I would like to use my PDA to surf with 3G speed (pairing with the mobile phone) and make normal calls with my magician. Would that be possible?
Is there any guide on how to do it? and also, is it because the standard magician bluetooth software does not support it?
Thanks & Regards,
i also have the similar problem when i want to connect my o2 mini to my K810i for internet connection. My O2 mini does not connect to the mobile phone via bluetooth. Connect by Infrared is working fine. Transferring files via bluetooth is working fine too.
My setting did not have any problem because it working fine with my treo 750.
Anyone can help me?
Are there really nobody in o2 mini anymore? OK, for the one that still with the mini. I have found the problem. When pairing O2mini bluetooth with any other phone which you want it to act as a data modem, just click 'NO' when u being ask 'will you want to add a serial port". You should able to dail after this.
If you replace the microsoft bluetooth stack with the Blue Soleil one (available on these forums) you get a hell of a lot more functionality with the bluetooth, it also adds the PAN facility. I have successfully connected my magician to my K800i and my C905 and both will suft the net perfectly well. You can do the same with the broadcom bluetooth stack on your home pc.
Is there a way to enable BT DUN on the Mogul? I tried the WM6_DUN hack posted in the other forum but it didn't work. Did Sprint strip it completely from the OS?
caxiem said:
Is there a way to enable BT DUN on the Mogul? I tried the WM6_DUN hack posted in the other forum but it didn't work. Did Sprint strip it completely from the OS?
Click to expand...
Click to collapse
Bluetooth DUN has been replaced with Internet Sharing. You havent seen easy teathering until you have used Internet sharing...it is a breeze.
Pair the Mogul to your laptop via Bluetooth. (this varies based on which BT stack you are using, MS, WC, Toshiba, etc) The software you use should support PAN (Personal Area Network) Once paired, you enable Internet Sharing on the Mogul and then connect the laptop to the Mogul as a BT Network Access Point and you are done.
I have tethered both my laptop and my HTC Tytn to the Mogul. Works great.
Brad
Thanks. I already got ICS to work with my laptop that's using BlueSoleil. I'm trying to connect my Nokia 770. It only supports DUN that I know of.
Internet Connection Sharing
Hi,
I read Brad's post on connecting your Tytn to Mogul.
I have Telus version of Mogul, they do not have internet sharing on device.
I did try PDAnet connecting to P3600 and the Mogul could not see a serial port profile on P3600.
My goal is to connect a HTC X7501 to HTC P4000. I have had no success.
Since I need to buy X7501 to test, I have tried using the HTC 3600.
If the device would have internet sharing vs wModem, would that increase my chances of using the P4000 as modem for HTC X7501 Advantage.
If Brad sees this thread, would appreciate a reply.
Thank You
Dave
caxiem said:
Thanks. I already got ICS to work with my laptop that's using BlueSoleil. I'm trying to connect my Nokia 770. It only supports DUN that I know of.
Click to expand...
Click to collapse
See this thread for a solution:
WM5 DUN Bluetooth N800
http://www.internettablettalk.com/forums/showthread.php?t=4211
Search for "tomtom" in the Hermes forum, there is a WM6 CAB file that enables DUN on the Mogul, works like a charm with the 770 and N800.
Hi all, maybe there is already an issue about this, but I can't find it so please be patient.
As a newbe on the Windows Mobile platform, I have a question.
Background:
For use with Geocaching I bought a second hand Ipaq HX2190b. Wasn't used at all. Including the whole lot of cables, manuals, docking station etc.
When using the Ipaq with some Geocaching Apps (Like GCzII) it wants to connect to the Internet.
But there's no connection to the Internet on the Ipaq itself, but ... I have also a Nokia E71, with a flat-rate connection on it.
Now the question:
Can I connect from the Ipaq, through the Nokia E71, to the Internet ?
And if so, how ????????
Thanks It Advance
Martyn