Database Users

Sharing GPRS connection on XDA2 with IPAQ using BluetoothGPS

Hi,
I'm trying to share my GPRS connection with my friend who has the IPAQ 1940. I'd like to use the Bluetooth connection.
I am using the BluetoothGPS.zip bluetooth stack which is basically the IPAQ one.
Can I just initate a SSA connection on the IPAQ and it'll automatically dial on mine?

To share Xda II intenet access to group of ppc or PC, I use pocketpcproxy (I named it ).
But that program are not perfected yet. If you are interesting, please check at http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=72
or http://en.pdamobiz.com/en/default.asp :wink:

Thanks, that's what i'm looking for...
BUT I noticed that the Widcomm bluetooth hacked drivers cause a lot of problems with the Pocket PC... Once you install that, your regular bluetooth gets messed up.
Also, you cannot use the Widcomm for SSA.
I'll email him anyway, thanks

TCP/IP over bluetooth on Chramer

Hi,
I hope I am posting in the right forum, but I didn't find a forum for the Charmer (MDA Compact II) PDA phone. So, I am posting here, because I noticed that there are many threads here about Charmer, but If there is any place where my problem fits better, please inform me about it.
So, is there any way to set up a wireless TCP/IP network between PC and Charmer (obviously, over bluetooth, Charmer doesn't have Wifi)? After 2 days of massive googleing and reading various threads, I figured out that my Charmer shipped with microsoft bt stack, witch is not support PAN. On the Magician, there is a solution, it is possible to replace the bt stack with another one, or expand the functionality (I don't know too much about the technical details) to support PAN. On the Prophet, the problem easily can be solved with Wifi.
But what about the Charmer? I cannot find any working hack to replace the bt stack.
Activesync works over bt, but there is no TCP/IP. If connect through USB cable, TCP/IP network appears.
I'm really disappointed, and plan to sell my 1 week old Charmer because of this problem. Any comments, tips or tricks are welcome.
Thanks in advance

go into my network places, view network connections. you should be able to use the 'bluetooth network connection' to establish a network between the two but ive just tried it on mine and it doesnt work, guess the charmers stack doesnt support it. i know this is the right way to go about doing it as i can set up a network between my pc and laptop.

Yap dave, I did exactly the same, under network connections/bluetooth network connection I cannot add my ppc, becouse it says that it doesn't support PAN. That's why I need to replace the ms bt stack, wich is a garbage. As I figured out the last days, nobody have succesfully did this scenario yet.

Any solution?
I still don't have the solution for replace the BT stack on Charmer which supports PAN.
Any ideas?

When you connect to PC via ActiveSync (via Bluetooth) your ppc got address 192.168.55.101 and pc got address: 192.168.55.100

Bluetooth pan network setup help plz

okay so here goes.
i have a S200 (Prophet)
ROM: RUU_Prophet_2151327_22113102_022021_Dopod_PDAMobizEdition_v101
Radio: 1_02.20.21
Protocol: 4.1.13.9
ExtROM: 2.21.13.102
i have been trying to get my Prophet to work with a bluetooth Pan network. The PC is setup to do it but the phone has no support for it or i just cant seem to get it working. can some one plz help to to solve this problem.
Thanks

as far as I know, the prophet does not support the bluetooth pan profile
http://www.clubimate.com/t-DETAILS_JAMIN.aspx

thanks for the info.
so is there no rom for the Prophet that supports the bluetooth pan profile?
or bluetooth driver updates or a another way it can be done it can be done?
i am also having problems using active sync with my bluetooth cant seem to get it right i am still reeding some of the posts here hope fully i can sort this out soon.

It is available in AKU3.2 ROMs and I use it successfully in my car PC.

PDAMobiz_Prophet_WM5AKU3.2_v3231.exe
is this the right one ?

That one and any of the 3.2 ROMs. But note that there are problems with these ROMs including the problem that the phone won't charge over USB (you have to use the main plug-in charger).
Good luck with it.

Tried one and the phone got stuck on the boot Screen just loaded the RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship.exe againe and i will try the other one againe now. Hope i get this sorted out LOL with out making a brick out of my Prophet.

GR8 the update is installed and now lets see what works and what does not work ...

Franscois said:
thanks for your reply on my post. I installed the ROM so far every thing is going well. all except that i cant get the PDA to connect to the PAN service.........
do you have any more information that might help ?
sorry to bother
Click to expand...
Click to collapse
Hi, I checked it again last night. I am using the AKU3.3 now, and this works too. My Bluetooth adaptor is a Belkin USB model and I am using the latest Widcomm 5.xxx.xxx drivers.
I start by using the Internet Sharing program on the Prophet, select Bluetooth PAN, the correct GPRS profile (in my case Orange Internet) and connect. Then I connect the PC using Bluetooth to the Bluetooth LAN on the Prophet.
Hope you can get it to work for you, but it may be also dependent on using a suitable Bluetooth stack in Windows.

The Widcomm drivers don't seem to work with my blue tooth adapter. so i have to use BlueSolei, or the windows drivers. the other thing is i wanted my Prophet to use my home networks internet witch is exactly the opposite of what you did in the above post, what i learned is that your bluetooth drivers must support the hosting side of the connection. The Widcomm drivers do support it but i just cant get them to work with the bluetooth device i have.
it looks like i have to buy a new bluetooth adapter if i want to get it to work....
or see if i can get the Widcomm drivers to work with my adapter.
any other way i can do this ?

Hi. Could someone confirms that Bluesoleil drivers runs ok in S200? Thanks and regards.

Bluetooth Dial Up Networking

Who can help me with the following:
When I pair my Qtek 9000 to my Bluetooth enabled notebook, I want to use the Qtek 9000 as Bluetooth dialup modem.
The problem is that when I have the notebook check the available services on the Qtek, the only available service there is "Bluetooth ActiveSync Service". So unfortunately no "DUN" of "Dial Up Networking".
I tried the same with my Nokia N93 and that one actually shows a few more services than the Qtek, including DUN. A Bluetooth modem then was added to my modem list (on COM4) and the entire thing works perfectly using the Nokia.
But... I want my Universal/Qtek 9000 to be the Bluetooth modem.
How can I perform doing this? I also tried the "Wireless Modem" app as provided in Crossbow (using the 2.00.04 PV PRO), but selecting Bluetooth en pressin "Start" doesn't do anything.
Note that I am using Windows Vista and that the Bluetooth interface is the Microsoft one, as installed by default (which works with the N93).
Thanks!!

what rom are you using?

WM6 Crossbow PDAVIET 2.00.04 PV PRO.

well my Helmi UNI AKU3.5 doesn't include a DUN profile and i'm 99% sure if that one didnt your slightly newer one won't either..
If you have a flick back through the forums theres a post about it.. saying using internet connection sharing on the pda instead .. I couldn't get it to work personally and gave up. I'm currently using mine as a usb modem instead.
Sorry for the bad news dude :-(

Ok.... I'll see what I can do to get it working.
Isn't there just a workaround to add the DUN profile in some way?

JayRayMee.NL said:
Ok.... I'll see what I can do to get it working.
Isn't there just a workaround to add the DUN profile in some way?
Click to expand...
Click to collapse
i'm fairly sure there isnt, I think its in the rom itself .. or in the blue tooth stack or something incredibly complicated.. enough for the rom builds on here not to bother touching anyway

Connecting HTC HD2 to another phone

Folks,
I'm new.
I have a t-mobile HD2 without a voice/data plan whatsoever. I would like to connect it via bluetooth to my blackberry and use its data plan to connect to internet. In other words - simply - I want to tether HD2 with BlackBerry via DUN.
... but
The problem is HD2 does not connect to blackberry's BT DUN - it wants PAN and BB does not offer it and i could not find any way to enable/add it on BB side. In fact, HD2 says it could not find _any_ bluetooth services it is interested in.
I have done this exact thing with my jasjar running a cooked wm6.1 and it worked by selecting a bluetooth in the modem list.
HD2 does not have this option and in bluetooth settings i can see that it only offers an incoming bluetooth serial port (COM1) but not an outgoing one.
I am open to flashing another ROM instead of the stock t-mobile.
Please help and thanks in advance.

anyone ? please help !

heelp.
no one? come on, folks. help.

I also want this topic to move higher. Searching for the solution also.
It was no problem with Qtek 2020i with some patch. But HD2 can't find DUN on other devices. Sad truth. Maybe some registry hack from other WIDCOMM based devices with DUN client enabled'll help?
Some solution...
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BTC1]
"Index"=dword:00000001
"Prefix"="BTC"
"Order"=dword:00000001
"DeviceArrayIndex"=dword:00000001
"Dll"="btcedrivers.dll"
"FriendlyName"="Bluetooth Port 1:"
[HKEY_LOCAL_MACHINE\Drivers\RegisteredDevice\BTC_BTC1]
"Flags"=dword:00000000
"Index"=dword:00000001
"Dll"="btcedrivers.dll"
"Prefix"="BTC"
[HKEY_LOCAL_MACHINE\ExtModems\BtDialupModem]
"DeviceType"=dword:00000001
"Port"="BTC1:"
"FriendlyName"="Bluetooth Dialup Modem"

Please help !
I need it.

Also desperately searching this too.
Desperately because I have no other possible solution.
This time it my car that provide the internet connection via BT DUN.
And of course no chance to get any kind of update/upgrade of the car bluetooth support.