I think I might have bricked. Please help me :( - myTouch 3G, Magic General

So.. I had CM6.0.0 Stable running on my 32A HTC Magic. All fine and dandy. Then I saw the Smoki ROM and I decided I wanted to flash that, but only one problem. It required a different radio and SPL. So no problem, right? I flashed the required SPL and Radio through fastboot. Looks good right now! Then I turn off the phone and boot into recovery.. but wait.. it just doesn't boot into recovery and just decides to hang at the HTC Magic logo.
I no longer have a ROM installed since I wiped. So I can only go into fastboot. Is there any way I can fix this, or did I just brick the **** out of my phone?

Ok. So chill out. You can drop one of the old updates onto the SD card and then, after entering recovery mode, just update from SD.
This is also considering you have a clue what I'm talkin about lolz.. let me know, I'll try to help more.

webmastertroi said:
Ok. So chill out. You can drop one of the old updates onto the SD card and then, after entering recovery mode, just update from SD.
This is also considering you have a clue what I'm talkin about lolz.. let me know, I'll try to help more.
Click to expand...
Click to collapse
That's the thing, I can't get into recovery. I can only get into fastboot.

BUMP I really need help, please...

Have you tried accessing recovery manually? By turning phone off, then powering on while pressing "Home" button..?
***Update: sorry, just reread your initial post. You've obviously tried that.. I'm trying to think of what else you can do..

Here, try this! Since you can get into boot loader mode, you should be able to reflash..
http://forum.xda-developers.com/showthread.php?t=463779

Related

Stuck on HTC Logo Screen

I just tried to flash a new ROM by putting it on SD CARD...
i pressed my volume up key and power button for 3 seconds and now my phone is stuck on the HTC logo screen...
it did even go in the HSPL screen
whatever i do it reboots and gets stuck to that screen...
pressing the red button at the back made no difference
what can i do ?
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
(1) Take out the battery / Unplug the phone
(2) Put the battery back in
(3) Turn it on and keep only Vol Down pressed
You should get a tri-color screen. Connect USB. Once it says USB at bottom, you are good to go with flashing.
hard reset
these solutions don't work. I had the same problem. Anyone has an idea?
any ideas about that? anyone found the solution?
enter boot loader n flash a new rom via sd card?
omnia1994 said:
enter boot loader n flash a new rom via sd card?
Click to expand...
Click to collapse
already done that... same problem... anything else?
reubenbubu said:
I just tried to flash a new ROM by putting it on SD CARD...
i pressed my volume up key and power button for 3 seconds and now my phone is stuck on the HTC logo screen...
it did even go in the HSPL screen
whatever i do it reboots and gets stuck to that screen...
pressing the red button at the back made no difference
what can i do ?
Click to expand...
Click to collapse
put phone into bootloader requires you to press volume DOWN while power resetting the phone. Make sure the ROM is named LEOIMG.nbh and is on the root of the sd card. Make sure the sd card is 8gb or smaller unless it is a class6.
www.golazo.ca said:
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
Click to expand...
Click to collapse
you need to put your phone back into bootloader, volume down while powering on the phone. then after you see the tricolored screen, connect it to the usb.
t45o5 said:
already done that... same problem... anything else?
Click to expand...
Click to collapse
what problem are you having exactly???? you haven't told us any details to help you.
same problem, after returning back to stock from android, it is stucked on first htc logo.
phone was freezing, so i decided to flash from android to stock, i used micro sd (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship)
now it is stucked. please help
firebroker said:
same problem, after returning back to stock from android, it is stucked on first htc logo.
phone was freezing, so i decided to flash from android to stock, i used micro sd (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship)
now it is stucked. please help
Click to expand...
Click to collapse
stuck where, on the splash screen?
do the same thing only this time use the HTC support page for the correct stock ROM.
thank you it helped, but i had to flash the oldest rom on htc.com.. i wonder why i couldn´t flash newer...
firebroker said:
thank you it helped, but i had to flash the oldest rom on htc.com.. i wonder why i couldn´t flash newer...
Click to expand...
Click to collapse
That's weird, maybe they didn't make a 3.14 ROM for your region.
Help BRicked ! htc incredible s....
was using clockworkmod and cyanogen,decided to flash a android revolution hd rom, intsalled super wipe and flashed it ,then flashed the rom...now phone stuck at htc logo and cant go into clockworkmod recovery,the problem is i left my phone in usb while the flashing ...
..
so decided to format sd and place the PB13IMG.zip on root of sd to reflash rom...still not working !
computer cant detect usb when tried to connect.tried installing drivers,still cant get into recovery....i am using a s-offed htc incredible s...Please help!!!!
will sending phone to htc void warrenty?if so will they repair and how much they will charge?
Your help is much appreciated ...thx !!!
Just downgrade again, I had same prob. Everything good now.
sent from my inspire 4g using xda app.
kaysen said:
was using clockworkmod and cyanogen,decided to flash a android revolution hd rom, intsalled super wipe and flashed it ,then flashed the rom...now phone stuck at htc logo and cant go into clockworkmod recovery,the problem is i left my phone in usb while the flashing ...
..
so decided to format sd and place the PB13IMG.zip on root of sd to reflash rom...still not working !
computer cant detect usb when tried to connect.tried installing drivers,still cant get into recovery....i am using a s-offed htc incredible s...Please help!!!!
will sending phone to htc void warrenty?if so will they repair and how much they will charge?
Your help is much appreciated ...thx !!!
Click to expand...
Click to collapse
woah, how the hell did you end up in this forum? lol.
can you get ADB going?
Post your problem in this forum so people who know your device better can help.
http://forum.xda-developers.com/forumdisplay.php?f=1026
HD2 TMOUS stuck after performing task29
www.golazo.ca said:
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
Click to expand...
Click to collapse
im having the same problem!i installed task29 (i had elegancia rom but i wanted to try another rom)and now im stuck on the htc logo screen that says 'stick together' in a red square.....i tried vol down+power button to go into bootloader but nothing happens, then i tried to hard reset but still nothing happens...i pushed the reset button and i did it all over again but still nothing...
my HD2 is a T-MOBILE usa with :
radio 2.08.50.08_2
2.08.HSPL
3.14.531.1 elegancia rom(http://forum.xda-developers.com/showthread.php?t=651729)
i love my hd2 and i want it back...PLEASE HELP!!!!!!!

Maybe someone can rescue me (quick! EEK!)

Hi all,
Maybe someone can help me out!
I am stuck at work - cant even really surf but had to post as I just feckered my mates HD2!
BOOOOO!!
So I installed HSPL and its still there.
Flashed up to energy ROM (APRIL 1st)
Then got stuck in reboot cycle - phone wouldnt boot unless it had power plugged in.
Took battery out of it and put mine in it which had higher charge - not much.
Then I got it booted into 6.5. Customised and changed settigns for Vodaphone.
Rebooted and phone stuck in loop again.
Couldnt get back into Vodaphone.
Went to bootloader and then used the official:
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
Flashed the bugger.
Then tried to boot again.
No boot without power inserted
Phone will not complete boot even with power
gives HTC white welcome, shows ROM etc
vibrates backto HTC white welcome.
Rinse
Repeat
Can anyone give me any ideas what I can do with this? He is coming to get it at 5.30; I am meant to have FPSECE Morph gear and all sorts of other shizzle for him
He is going to get a brick
any ideas would be GREATLY welcome.
no flames please if I missed something, I am desperate to sort this quick and quiet.
Try make Task29 and then reflash Radio and ROM, it could help you i think...
Have you installed radio 2.08 ?
You should. You can install it by downloading it and use customRUU to install the file.
Put phone in bootloader first.
Your mate's phone will be revived
What radio do you have installed. The NRG roms require radio 2.08.50 in order to boot.
Yea sounds like a radio issue. You didn't mention what phone? US Tmo HD2 or everywhere else HD2?
Is GSM HD2
I have done all above task 29 new radio - loads of roms.....stuck in circle.
Phone will not boot without apower lead in it
Ahh feck [email protected]
What version radio does it read then when you are stuck in your bootscreen ?
is it still 2.06 or 2.08 now ?
Installing HSPL doen NOT upgrade your Radio.
What is your SPL version ?
And "fecking ass" is groce. Try fecking some koent.
lucid said:
Have you installed radio 2.08 ?
You should. You can install it by downloading it and use customRUU to install the file.
Put phone in bootloader first.
Your mate's phone will be revived
Click to expand...
Click to collapse
ClydeB1 said:
What radio do you have installed. The NRG roms require radio 2.08.50 in order to boot.
Click to expand...
Click to collapse
Actually they dont require 2.08... they require a radio without .51 numbering.
You can use
2.07.50.27
or
2.08.50.08
either will work just fine.
misticjeff said:
Actually they dont require 2.08... they require a radio without .51 numbering.
You can use
2.07.50.27
or
2.08.50.08
either will work just fine.
Click to expand...
Click to collapse
True, I use 2.07 (old signature LOL), but just mentioned 2.08 as it's the recommended one.
Oh ****e
Ok all,
Big warning to all here:
See my attached image.
I bent the left most battery connection pin out a tiny little bit - so little I didnt notice it.
Then the phone would obviouslly only boot without the power plugged in.
The pin was being pushed out! and not connecting with the battery.
I bent it back and it booted whilst I was explaiing that I was having teething trouble with his new ROM.
HAHA
Thanks VERY much to all for ideas and fast feedback - really thought I done it in then! Bloody hell Id have had to give him mine!!!
OH NOOOOOOOOOOO!!
@ the try some Koent line......OH GOD LOLOLOL
Waht with the relief of fixing the device and a joke like that, I was ROFL ing it - Not RALPH ing it...
Thanks again all
Yarod, the above advice for the radio version applies only to the custom rom.
By flashing a factory rom from the memory card you have probably overwritten hspl which is why this dosen't boot.
First thing to do is reflash hspl in the bootloader, via usb. If you remove your memory card and hard reset, then you should get a working phone. Assuming it's a vodafone branded handset you can use a vodafone branded rom without the need for hspl - there's a 1.66 version up on the uk site.
If you want a custom rom, use hspl and check the radio requirements before flashing
and most importantly flash via the usb only to avoid overwriting hspl.
hth,
mike
hah! bent pin, nice one. Bet you felt a huuuge wave of relief wash over ya when it booted eh? Gotta love that post adrenaline comedown.
here we go again with another victim....
1. Hard reset
a. turn off your HD2
b. hold Volume up and down and press end button till it will vibrate show white screen that you wanna hard reset
c. release volume up and down
d. press volume up for continue Hard reset
e. press volume up for continue boot up
it will boot up your device...
2. install radio for energy click here or herefor download
3. Use Customs RUU from here
4. flash your radio
5. now you are good to go....
i hope this helps i know how you feel cause i had same problem and this phone worth a lot so... take care...
yarod_g14 said:
Hi all,
Maybe someone can help me out!
I am stuck at work - cant even really surf but had to post as I just feckered my mates HD2!
BOOOOO!!
So I installed HSPL and its still there.
Flashed up to energy ROM (APRIL 1st)
Then got stuck in reboot cycle - phone wouldnt boot unless it had power plugged in.
Took battery out of it and put mine in it which had higher charge - not much.
Then I got it booted into 6.5. Customised and changed settigns for Vodaphone.
Rebooted and phone stuck in loop again.
Couldnt get back into Vodaphone.
Went to bootloader and then used the official:
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
Flashed the bugger.
Then tried to boot again.
No boot without power inserted
Phone will not complete boot even with power
gives HTC white welcome, shows ROM etc
vibrates backto HTC white welcome.
Rinse
Repeat
Can anyone give me any ideas what I can do with this? He is coming to get it at 5.30; I am meant to have FPSECE Morph gear and all sorts of other shizzle for him
He is going to get a brick
any ideas would be GREATLY welcome.
no flames please if I missed something, I am desperate to sort this quick and quiet.
Click to expand...
Click to collapse
Hey! I did the same mistace, u need to download HSPLv2 , Install 2.06.0000
Then volume down + power botton, install stock ROM from HTC.com, and reboot.
That worked for me, hope it works for you.
Cheers.
lol
hi all this is fixed see my previous post, i had bent the battery pin - so small didn't notice it. i wonder if anyone else has suffered from this?
many thanks
i am tempted to fart in the general direction of the "another victim" statement
I'm a fixer not a victim lol...
yarod_g14 said:
hi all this is fixed see my previous post, i had bent the battery pin - so small didn't notice it. i wonder if anyone else has suffered from this?
many thanks
i am tempted to fart in the general direction of the "another victim" statement
I'm a fixer not a victim lol...
Click to expand...
Click to collapse
It just happened to me!! A billion thanks mate
Another reboot loop victim...
Bent battery pin seems to have been the culprit for me as well! sat on charge now to get it to 100% before I start reinstalling cabs and stuff.

[Q] HELP!!! Rom Manager bricked my device!!

here's the story,
i installed rom manager from the market. flashed the clockwork recovery using it, then tried to flash a new rom using rom manager. i am sure that the rom is compatible with my settings. now my phone is in the boot loop and i can't get into recovery nor the bootloader. any help?
32a s-off
radio 6.35
2007 spl
i can only remember the basics of my device since i can't get into the bootloader...
THANKSSS
Did you pull the battery and then try booting into recovery/bootloader? If you get thrown into the bootloop when you put the battery back in, try holding back/home while putting the battery in.
Thanks for helping me! I actually did try that method but I was back to boot loop again. I really hate that "Rogers" screen.
Does that mean I'm bricked for good?
as it turns out, HTC makes magical device as it cured itself from the brick!!
i basically gave up and just left it running till the battery goes out, the next day, it is booted into the rom.
truly magical!!!!
True happened to me once when I tried to load my first rom. Just let it sit there while I'm searching the forums trying to look for some answers then voila it booted up properly
too bad i semi bricked it AGAIN!!! i really am bad at this...
flashed rogers official rom over cm. should have done some research first. still trying to fix it. but its not bad, learn a lot everything time i do something wrong.
Did you wipe prior to flashing a new rom?
Sent from my HTC Magic using XDA App
I've done the same mistake and my device hanged at rogers rom with radion 3.22 and SPL 1.76 S-ON. I've briked mine very bad that time, but yours might yet be recoverable. If you have s-off, the i think you're saved. Post your hboot info here...
Hi... I have similar problem... but my phone can't power on... in have samsung galaxy gio (GT-S5660M) after using rom manager... the phone reboot and can't start... nothings appear in the screen... I have only black screen... nothings appears
I try to remove the battery and put again... but nothing... I try to remove the sd card too and restart again... nothing... the cellphone not power on... I dont see any screen of logo, boot... nothing...
When I apple rom manager... the phone are disconnected (not charging)
Anybody can help me please ??
I dont know what happend :S

[Q] Magldr 1.13 CWM 1.3 Help

Hey Guys I Recently tried to flash Clockwork mod so i could get this rom http://forum.xda-developers.com/showthread.php?t=1036948&page=4
Did everything right but now my phone is stuck on the magldr boot screen and my old android rom wont load:[ and now my phone wont turn on unless its connected to the usb:[ please help it wont let me boot ad sd It says SD Kernel Open Failed and whenever i go down to AD Recovery it loads up but my phone turns off after Load Done! 123456, How can i get this working please Help!
Stealthy_Stoner said:
Hey Guys I Recently tried to flash Clockwork mod so i could get this rom http://forum.xda-developers.com/showthread.php?t=1036948&page=4
Did everything right but now my phone is stuck on the magldr boot screen and my old android rom wont load:[ and now my phone wont turn on unless its connected to the usb:[ please help it wont let me boot ad sd It says SD Kernel Open Failed and whenever i go down to AD Recovery it loads up but my phone turns off after Load Done! 123456, How can i get this working please Help!
Click to expand...
Click to collapse
ok, 1. theres a quetions sub thread for you to post questions in, this is not it.
2. thers a magldr and clokwork thread you could post in, why dont you?
3. your battery doesnt have any juice, so you can either get a standalone battery charger to charge it, or do like i did and cut a usb cable, attach the +5 and negative terminals to teh battery for 5 minutes so it has juice.
and 4. it sounds like you didnt resize your partitions when you flashed the new rom, i cant believe how many newbes overlook that step. specifically it sounds like your boot partition is to small, but thats just a guess.
i can guarantee you this thread will get moved to the questions & answers thread, so dont be suprised when you dont see it here anymore.
Sorry Bro Im A Newb lol But Yeah i guess I skipped that step and i tried to reflash my old Nand Rom and it gets stuck on the DFT Screen And turns off :/ My Hd2 still wont turn on unless its connected to usb
Okay so i managed to get my old rom back up but all my apps and settings were erased:[ how can i get my clockwork mod back up to work?
Stealthy_Stoner said:
Okay so i managed to get my old rom back up but all my apps and settings were erased:[ how can i get my clockwork mod back up to work?
Click to expand...
Click to collapse
You have to boot into MAGLDR by holding the power button down while your HD2 powers on. Scroll down to option #8 AD Recovery and press send thos will boot CWM.
T-Macgnolia said:
You have to boot into MAGLDR by holding the power button down while your HD2 powers on. Scroll down to option #8 AD Recovery and press send thos will boot CWM.
Click to expand...
Click to collapse
How do I partition or whatever ? Im Still trying to get the rom from my original post? Please Help Me:/
Stealthy_Stoner said:
How do I partition or whatever ? Im Still trying to get the rom from my original post? Please Help Me:/
Click to expand...
Click to collapse
Oh and i just tried that but it said theres no boot sources? so im guessing when i flashed my old rom back on it ****ed it up? so do i have to reflash CWM? And if so how do i do the partition so i can get that rom up there? :3 thanks
I would like to piggy back on this problem. When I press option 8 my HD2 does not go into CWM. It hangs at "Load done1 E1 Fatal hit" Has anyone else come across this and knows the fix so I can get into CWM? Thanks

Need help, dont know what to do!!

okay you guys, i dont know if im posting in the right section or not.. but i figured it would be good to post in the general section.
i have a tmobile hd2... it wont boot. sometimes i get the tmo bootscreen and it gets stuck there, other times its unresponsive, and other times it vibrates seven times and the screen never turns on..
i just want to mae this thing functional again. is there any way i can bring this device back to stock? whether its with a windows rom, or android rom, i really dont care.. lol i just need help. anything would be greatly appreciated.
if you have wp7 on it...your problem is because of incompatible sd card..try another sd card and hard reset
GunbladeGriever said:
okay you guys, i dont know if im posting in the right section or not.. but i figured it would be good to post in the general section.
i have a tmobile hd2... it wont boot. sometimes i get the tmo bootscreen and it gets stuck there, other times its unresponsive, and other times it vibrates seven times and the screen never turns on..
i just want to mae this thing functional again. is there any way i can bring this device back to stock? whether its with a windows rom, or android rom, i really dont care.. lol i just need help. anything would be greatly appreciated.
Click to expand...
Click to collapse
Just thinking it could be a bad battery, but more info would be helpful.
Or check if battery pin is bent
Sent from my HTC HD2 with WP7.5/android miui using tapatalk
battery and pins are fine... th sd card was working before but now the phone seems to have been condemed.. any information you would need just feel free to ask, i dont really know what to tell you guys since i dont know whats wrong with it
I managed to get to the rgb screen.. I'm guessing hspl is installed, because it says hspl on the screen lol.. Any suggestions on what I should do from here?
Sent from my PG86100 using XDA App
that happened to my phone once. i thought my battery was fried or something, but it turned out that my pins were bent. works fine now.
if you can get to the RGB screen, your phone is still safe i believe. Try getting a compatible SD card and then try and flash another WP7 rom. Also make sure your HSPL is 2.08. Anything otherwise, won't boot also.
HSPL must be 2.08.... if any other version, WP7 wont boot... but most of problems in sdcard compatible
task 29, and reinstall hspl , than magdlr. also make sure of bad blocks.
okay, at first i tried an ruu that i got directly from tmo but it would always hang at 8%... then i ran the task 29 file and it went through 100%... im gonna let the battery charge for a little bit since i dont want anything else to go wrong... im going to search on how to install hspl and everything else.. im asuming that i need an sd card for this lol. thanks everyone for the help!
Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
Guys I’m having a similar problem. I had “XBmod-Yuki 2.1” loaded yet I was experiencing sporadic reboots.
I decided to re-flash using the SD card advice provided by XDA site. I purchased a new compatible SanDisk 16gb.
While following the XDA instructions to the letter, I completed the “Flash the ROM with DWI” step (w/ SD Removed) and my phone is now on an endless reboot loop. After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
The phone is not bricked because I can still re-flash the TMO stock 3.14. Yet when I try again, after “123456 GoGoGo” the screen goes dark and reboots; endlessly.
I love Windows Phone 7.5 Mango and I must restore my phone to its glory…
Please help! What do I do to get pass this paralyzing issue???
insert card to phone and turn on with Volume Up + Down + Power together.... when white screen shows, follow instructions on screen...
Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
Thanks for the reply DXDY...
I tried what you suggested. The master reboot completed and the phone rebooted into the same endless reboot loop.
My steps have been to:
reflash stock 3.14; allow complete boot up
install magldar113_daf
delete mbr using magldr113
Enable 24MB extra memory in Magldr services
Flash the rom with DWI...
after i flash the rom it reboots in to the endless loop. it never completes a boot up cycle. Right after "123456 GoGoGo" the "tomobile "stick together" logo flashes and the phone reboots; endlessly...
I have tried different roms; exact same behavior...
it has to be something simple because, the phone is not bricked; I can still re-flash the TMO stock 3.14. The stock ROM works perfectly and my SD card (Sandisk 16gb class 4) still works perfectly also...
Any help you can provide is greatly appreciated...
only problem then is SDcard.... try boot without sdcard for test.....
Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
i have tried reflashing with the SD card in the device and with the SD card removed. Once before i was able to flash the either way (with or without - both ways worked before). Now immediatley after reboot the device enters endless reboot loop...
any help is appriciated...
try with NAND toolkit... http://forum.xda-developers.com/showpost.php?p=19931919&postcount=501
wipe NAND with Task29, check and install again HSPL 2.08
flash WM6.5
flash MAGLDR
after that flash WP7
dont know which other to advice you...
melcad Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endless
what is task29? i understand the other items. i just need clarification on task29...
Task 29 formats the partition drive of your device where the ROM resides.
it's cleaning partition, removing any leftover junks thereby giving a fresh partition for the ROM to operate
Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
Wow, that did it! the task29 cleaned up the NAND as you said and allowed me to reflash WP7...
One last question; when updating WP7 using the cab sender method; may I remove the languages that i dont need from the RAR pack???
incompatible sd card....change and try again with another sd card
dont remove the language cabs...preferred to keep them in

Categories

Resources