Database Users

[Solved] Task 29 bricked my phone! Help!

Hey guys,
Well i had 2.08hspl on my phone with a 2.10._50 radio (something like that) and i ran task 29 to clean up my phone for a chunky rom.
After i ran the task29 utility, everything went to 100%, but i missed hittin the volume key in time. So i took out my battery and put it back in. Now i cant get the device to power up whatsoever.
Am i screwed?

Hi Jhonka
Can you get into bootloader mode? I have doen Task29 many times, and no issues, even if i miss the volume key. Try pressing the volume key down and hitting the power button for a moment before letting it go. Should get you into bootloader, and usb mode once you connect to the PC thru USB.

no i can't even get into the bootloader

may be not enough battery power
JhonKa said:
no i can't even get into the bootloader
Click to expand...
Click to collapse
your problem might be "not enough battery power"
charge your phone for a while and press power button by while pressing volume down.
hope it works.
good luck!

JhonKa said:
no i can't even get into the bootloader
Click to expand...
Click to collapse
what is the specific type/model of your phone?
battery might be low as mentioned by another user above.

take out the battery and press volume down and power-on to get into bootloader. connect yr device via usb and flash the ROM.
are u sure yr battery is not empty?

on the second thought, maybe the task29 was run without radio ROM?

sounds like it was run using a ..51.. radio on a tmous.

samsamuel said:
sounds like it was run using a ..51.. radio on a tmous.
Click to expand...
Click to collapse
so is it beyond help? wow, bummer
about naming convention, does TMOUS-compatible, TMOUS-support ROMs mean it's a TMOUS ROM?

BumAround said:
so is it beyond help? wow, bummer
about naming convention, does TMOUS-compatible, TMOUS-support ROMs mean it's a TMOUS ROM?
Click to expand...
Click to collapse
yes if it says tmous ok or tmous compatible or whatever then it means that that rom is based on version 2.x official tmous rom so it will work on tmous.
as for the op, if he did use a ..51.. radio then yes its unrecoverable.
but there are one or two posts with black screen, phone not booting, that aren't caused by this, but not many.
@op try the battery out for an hour and then try again.

thanks for all the responses guys.
I finally got it to work, i took the battery out for 30 minutes and held down the power button. (which i hear drains the rest of the charge in the phone)
turned it on, freaked out with joy then installed my new rom.

JhonKa said:
thanks for all the responses guys.
I finally got it to work, i took the battery out for 30 minutes and held down the power button. (which i hear drains the rest of the charge in the phone)
turned it on, freaked out with joy then installed my new rom.
Click to expand...
Click to collapse
dude I feel happy for you

JhonKa said:
thanks for all the responses guys.
I finally got it to work, i took the battery out for 30 minutes and held down the power button. (which i hear drains the rest of the charge in the phone)
turned it on, freaked out with joy then installed my new rom.
Click to expand...
Click to collapse
wow, good thing it worked.
btw you never told us which version of the phone that you're having? (US/non-US/unlocked/etc)

HD2 not booting
I have the same problem but I can get back to bootloader mode.. Problem is at the beginning when I ran task29, I don't think I flashed with the radio so now my phone is not booting. How am I going to put back the radio. Please help!!!

can you go to the bootloader/
dau888 said:
I have the same problem but I can get back to bootloader mode.. Problem is at the beginning when I ran task29, I don't think I flashed with the radio so now my phone is not booting. How am I going to put back the radio. Please help!!!
Click to expand...
Click to collapse
if you can go to the bootloader,then put the radio into your sd card and change the name accordingly.
then flash from boot loader.
am i right?

thihaz said:
if you can go to the bootloader,then put the radio into your sd card and change the name accordingly.
then flash from boot loader.
am i right?
Click to expand...
Click to collapse
Hi
Recommmended way of flashing is for the HD2 is from your pc not from microsd. Put the device in the bootloader and connect the usb and flash the radio or rom from the pc. This is the way is more safe.
Good luck

Uh oh, HD2 might be bricked/broken?

Hi all,
Hoping someone can help!
OK, first of all I'll admit quite openly that my knowledge of flashing and so on isn't what you'd call strong so any accusations of being a n00b are warranted and accepted.
I got my HD2 in Jan and I'd flashed a few handsets before without issue so flashed the HD2 pretty much straight away and played with some ROM's and so on and settled on one (from memory Dutty ROM) and everything was fine, the phone was stable and everything was good.
Then 2 weeks the handset started acting oddly. I hadn't changed anything (as far as I'm aware) but the phone starting freezing, restarting and so on. I'd have to take the battery out to restart it (and sometimes leaving the battery out for a while before it'd boot up.) When it froze the area around the bottom of the battery would also warm up. I'd also notice that if I tried doing something on the handset it would restart - almost as if I was putting to much "strain" on the handset and it went *bang*.
I decided to hard reset the phone and it went back to original form. Now, I'll again admit this is probably down to my lack of knowledge, I assumed this put the handset back to a factory state but this is probably not the case (it certainly looked like it but some signs suggested it hadn't).
This seemed to improve things a little but the problems just came back. As I'd flashed it and put on the HSPL I thought the warranty was now invalid so thought I'd try and "fix" it myself.
Big mistake.
Or was it?
I think the phone has an issue with power or something like that as it freezes as I've said. And it did this while I was trying to flash a ROM. Panic then set in.
Basically my handset is now in a state where it'll boot into the bootloader (power and Vol down) three colour splash screen and it'll do the white HTC "normal" boot up screen but nothing else.
I can connect to the handset via RUU and I can run:
Task 29
however this doesn't run and finish gracefully most of the time. It'll stick on 99% or 100% or sometimes it'll moan about not being able to do this on this handset.
Any ROM I now try to flash on it using the exe's or RUU (I've not tried them all, granted!) starts and stick at a certain percentage. The Artemis ROM sticks at 12%, Official 1.43 WWE ROM sticks at 0% and Leon ROM sticks at 9%. Eventually they'll time out with an error. Unfortunately I left the handset at work so cannot state which error(s) I get when trying to flash a ROM.
So, after boring the hell out of you, is the handset terminally ill in your opinion? I really do think that there could be a faulty power button/general power issue with the handset (just a feeling I've got) but from my brief reading I'm not 100% sure.
Is there anything I could do? At the moment it's completely unusable so any suggestions on getting it into a working state? Ideally I'd like to get it into a state where I could return it to O2 UK and not have them flag the fact it's been flashed.
Any help gratefully received!

can you get into bootloader? if so, check the spl.
if it is 1.42.0000 or 1.66.0000 then the warranty is fine.
if the spl ends .hspl then connect to usb and run hspl 2.
choose whatever was your stock spl (one that ends 0000, 1.42.0000 most likely)
reboot to boot loader, and confirm the spl ends 0000 and you will be fine.

have same problem!
my hd2 freezed on startup screan, boot screan, sometime donot start - only black screan, after rom flash 99percent or 100percet once freezed when i return stock rom and spl,sometime dont want to boot with 1.42hspl, next time with 1.66, but my experinece is :
1.
-with 2.08hspl allways start
-uninstal your hd2 driver on your computer! restart your computer install after that, with windows update,
-same with bootloader mode, uninsta, driver on your computer,restart your comp, and install it
-turn off your antivirus protector when install any rom, and your run as administrator in windows 7,vista.
2. use other pc if this dont help
3. the problam can be with battery pins under cover.
some people write there with pins problem, they have screaved pins and hd2 dont want boot or start or have same problems
its my secondary problem
if u want u can use clasical gum ereaser and lightly clean pins and battery conectors...
its help for better contact
donot take the pins with wet hands!!
its can make litle corosi..
i belive its help to you
sorry for my english

lol its come to me on twitter
http://wmpoweruser.com/?p=16952

samsamuel said:
can you get into bootloader? if so, check the spl.
if it is 1.42.0000 or 1.66.0000 then the warranty is fine.
if the spl ends .hspl then connect to usb and run hspl 2.
choose whatever was your stock spl (one that ends 0000, 1.42.0000 most likely)
reboot to boot loader, and confirm the spl ends 0000 and you will be fine.
Click to expand...
Click to collapse
Samsamuel, you're an utter *star*.
Now back to 1.42.0000. I can blag O2 now if needs be in regards to the handset (tried upgrading to 1.72, USB cable came out, phones shagged, give me a new one, etc) without them getting funny about it if needs be.
Will try upgrading to 1.72 stock O2 ROM and see what happens.
Thanks again Samsamuel, I owe you a pint!

I have the exact same problem.
The screen freezes for a while, and then the device reboots.
Usually it's stuck on the white (with green "HTC") screen after that, the red text doesn't show up.
If I remove the battery and leave the device alone for a while (cool down?) it boots past the white screen (although it's highly likely that it crashes again when I enter my pin).
At first this was only happening when I was watching some video's with coreplayer, but now it's just happening all the time, even when it's in my pocket.
I just finished flashing a stock rom, but it's even worse now
9 out of 10 times it doesn't even make it to the pin screen, and I have spend about 2 minutes total actually in windows mobile.

Brood, it sounds like your issue is hardware related, I would contact htc too look into getting it repaired.

Just an update from OP.
Thanks for the link ilijan, very interesting.
I spoke to O2 business tech support yesterday and deliberately asked whether anyone else was complaining of this issue. They said no but I'm unsure whether I believe them and whether this was just the corporate line.
After setting my SPL back to 1.42.0000 I tried flashing to 1.72 stock and this did work. Every other ROM I tried wouldn't work. Even with the official ROM it's still freezing/restarting.
Getting a refurb today.
Thanks to all that responded/helped. Appreciated.

[q] magldr help

Hey guys well I'm having really bad problems with Magldr and my phone. My phone just randomly restarted, then wouldn't get by the HTC bootsplash screen. But now, it won't even go in to Magldr or turn on, unless it's plugged in to my USB. So now, when I plug in the USB, the phone starts to boot up by the HTC screen then goes to the Magldr bootloader where it says From NAND, 1234 GO! screen.
But after this nothing happens and just repeats the same thing over and over again.
I've tried flashing different ROM's and different SD cards but they all have the same problem.
Any way I can fix it? Thanks.
LS

I'd suggest running a Task29 from bootloader, then starting again with installing magldr etc. I was also having some problems getting a rom to boot, so I've just returned after going all the way back to my stock winmo rom and all is good again.

ClydeB1 said:
I'd suggest running a Task29 from bootloader, then starting again with installing magldr etc. I was also having some problems getting a rom to boot, so I've just returned after going all the way back to my stock winmo rom and all is good again.
Click to expand...
Click to collapse
Just the man I was hoping to help me lol. Is there a guide on that anywhere? I'm fairly new so don't really know what Task29 is. One thing - I tried to boot to HSPL and it wouldn't.
EDIT: After several tries, I'm in HSPL 2.08 now. Now I just have to find out how to do the rest. Do I keep an SD card in or does it matter?

Use this tool and select the option to run Task29. It formats the entire NAND area. From bootloader, connect to pc and run the tool, watch progress and as it reaches 100% hold the vol down button in so that the phone boots back to bootloader (if you miss it no biggy, just pull the battery and boot into bootloader). Then reinstall magldr etc.
You can leave the sd card in, makes no difference.

ClydeB1 said:
Use this tool and select the option to run Task29. It formats the entire NAND area. From bootloader, connect to pc and run the tool, watch progress and as it reaches 100% hold the vol down button in so that the phone boots back to bootloader (if you miss it no biggy, just pull the battery and boot into bootloader). Then reinstall magldr etc.
You can leave the sd card in, makes no difference.
Click to expand...
Click to collapse
Thanks. Fingers crossed this works. Don't want a bricked phone.

As long as you have hspl you'll be fine. I've done this procedure hundreds of times

So I've ran the Task 29 but nothing's different. Still keeps rebooting. Any other tips?

Check your battery pins. Sometimes the copper pins get bent a little out of alignment. Just gently straighten them out by hand. Make sure that you are gentle in future when removing and especially inserting the battery.

You are f*cking god Clyde. Thank you so much. That's what it was. How do you know so much about the HD2? Great man. Do you have a Paypal?

Glad to have found the problem. Those battery pins have caused a few headaches, as I say be careful with them in future. I learn't just by reading the threads and having been around the block a few times . It's not necessary to give me any payment, but if you really want to buy me a pint, there is a donate link to my Paypal account just above my avatar. Thanks m8

ClydeB1 said:
Glad to have found the problem. Those battery pins have caused a few headaches, as I say be careful with them in future. I learn't just by reading the threads and having been around the block a few times . It's not necessary to give me any payment, but if you really want to buy me a pint, there is a donate link to my Paypal account just above my avatar. Thanks m8
Click to expand...
Click to collapse
Haha yeah, I thought my phone was done and dusted by now. Still going though, best phone EVER. Well if somebody helps me, I like to help them back.
I'll donate soon, when I receive my wages.

[Q] Need serious help here.

Ok so i think i bricked my phone
Here's what happend:
My ROM was freezing up on me constantly so tried a different one, but had the same effect. MAGLDR 1.13 had problems booting and so had Clockwork.
So i figured i'd flash a winmo 6.5 rom to start all over. Now when i tried to flash the stock ROM i crashed at 8% i could only remove the battery, and now its unresponsive to everything, soft rest, boot into bootloader, normal boot, charging.
I really need my phone, does anybody have an idea?
Thanks.
Greetings.

i would pull your battery
hold down volume down and red power buttone then install battery while holding
that should get you into bootloader screen
you should also post what you tried to flash and what phone u have to get to this point.
possibly get a battery thats charged completly to try

The battery trick didnt work.
I tried to get rid of MAGLDR by flashing this rom:
http://forum.xda-developers.com/showthread.php?t=623283
and then the dutch one.
At 8% of flashing, an error occured. Had to pull out my battery and my phone has not responded to anything since.

Still nobody with any ideas?
I know the help on this forum isn't much but come on, im really desparate over here.

Therk said:
Still nobody with any ideas?
I know the help on this forum isn't much but come on, im really desparate over here.
Click to expand...
Click to collapse
...when you are not able to get to the tri color bootmenu by holding volume down while starting your phone then your phone is bricked.
The only way to unbrick it, is to use a jtag adapter..not very cheap, about 200$ and more!?
Sent from my HTC HD2 using XDA Premium App

At 8%, it's flashing the radio/SPL/etc (the important stuff). Plug it in to the charger. Any lights at the top? If not, bricked.

Problem you have is sort of referred to as "stuck radio ",,,,(mostly by me, to be fair) and you aren't getting answered because there seems to be no real fix for it. Some have managed after much trial and error to get a radio to flash, but most cases seem to end with nothing but JTAG or new mainboard.
Something that came up recently was flashing the 2.07.51 radio (not for tmous phones! ) so you could give that a try. Be interested in your results.
you could also try the "sd and sim and battery out, chill the phone in fridge/freezer,sealed in a bag, rom/radio image on the SD ready to flash" method. If this works then you have heat induced hardware failure.

my htc hd2 is STUCK.. HELP ME PLS

I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help

Before we start, you can ask him how his device has ended up like this, can't you?
boxboy said:
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
Click to expand...
Click to collapse
Sir, you have forgotten your caps locked.
boxboy said:
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
Click to expand...
Click to collapse
Because you have stock SPL, you won't be able to install any custom ROM or any stock ROM not made for your region/SN.
boxboy said:
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
Click to expand...
Click to collapse
AFAIK, task29 is, also to be considered, a custom rom so it needs HSPL to be flashed. Are you sure you have followed the steps correctly?
boxboy said:
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
Click to expand...
Click to collapse
That is not a ROM, it's a radio. You need to flash HSPL to be able to change the splash screen (NRG Screen). HSPL should go like this: SPL 2.08.HSPL .
boxboy said:
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Click to expand...
Click to collapse
Microsoft is a corporation, Windows Phone is the OS .
One more thing, to be able to flash a LEOIMG from sd, the .nbh must be a rom that is compatible with your device (It will work if you get it from htc.com using the device's serial number)
I hope this helps. And I'm sorry if I am incorrect at something.
Good luck.
------------------------------------------------------------------------------------------------------------------------------------------------
To summarize it, you need to do either one of the following:
1- Install HSPL, and do what you want.
2- Go to HTC.com, download a rom using your Serial Number, rename file to .zip, extract the .nbh file, rename to LEOIMG.NBH [Capital letters], put onto sd card and insert into phone, boot up device while holding volume down ONLY, and make sure splash is removed and you're back to the "htc" stock, then send to repair [why?].

posting teh same post in multiple sub forums is considered rude
http://forum.xda-developers.com/showthread.php?t=1440265

Yeah, HSPL is needed for flashing pretty much everything. One thing you could do would be to flash a stock ROM from your SD card (just google it I CBA to provide links and stuff) which would reset everything to factory WinMo (including SPL to SPL3.03 [assuming you flash the latest ROM 3.14]) and from here it would basically be a fresh start. Probably the safest route without HSPL

Hi.
Thank you for your replies...
Let me tell u guys if I forgot to say earlier. The mobile phone is not letting flash any of the Hspl... be q series, 2 series or 3.series... all the times it says error 0000006 and 000000010 etc... a couple out of hundreds it did let flash but then it doesn't let me flash the factory rom fom HTC.

I have succesfuly flashed the 3.03 hspl... bit still no success in flashing any roms ... it gets stuck sometimes at 99% and sometimes at 0% and sometimes it comes up with a scrambled screen and stuck

OK,
My final.outcome.
This phone let's me flash the hspl but it doesn't let me flush any roms including the original HTC factory rom.
I can also perform the task 29. Etc but still the NRG screen is still there.
I would like to know that if I flash the original Split and send it HTC, will be repairable for free? Sure? Even with the NRG.

now i think the only option available to you is jtagging the device which may permanently void the warranty !!
it had happened with me once, but somehow it got solved !
i used to randomly install clk, magldr, radios, hspl etc multiple times !
it used to get stuck while installing and then i used to remove the battery and try again !!
somehow it started ! !!
STRANGE DEVICE !!

Yeap its a real problem!!
Now , It will not let me change the hspl to spl whatsoever I do.
I would like your suggestions
I bought this brick for £50 and I can return it to get my money back. Has any used jtagging and does it 100% work?. The thing is if I do used jtagging, and if it doesn't work ,then I can,t return it!. How much does it cost and is it worth it?

jtagging will solve your problem !!
they remove the motherboard of the device and flash the os into the motherboard directly through a device named riff box !!
refer this video for more info !!
http://www.youtube.com/watch?v=zElsUERTzOU
but pls do not try this at home ! !!
just contact a local repair shop to jtag your device !!
also u can contact these guys from the video !!
good luck ! !!

boxboy said:
I have succesfuly flashed the 3.03 hspl... bit still no success in flashing any roms ... it gets stuck sometimes at 99% and sometimes at 0% and sometimes it comes up with a scrambled screen and stuck
Click to expand...
Click to collapse
Check that the micro USB connection isn't "wobbly".
I had a TMOUS HD2 and never had any issues. Then, I sold it and got a Telstra HD2 and had big issues getting ROMs installed until I realized that the connection at the phone was a little weak. I can't send any updates to WP7 via cab sender unless the phone is in a certain position to keep the connection from breaking.

boxboy said:
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Click to expand...
Click to collapse
Don't worry ... you can give the life to your phone back... it shows fail bcus u have 2.08.0000.. so it means u Sud have 2.08 v hspl.. so try flashing hspl by getting into bootloader(3 colour) by pressing volume down + power Then flash hspl.. but remember select 2.08v.. then again after flashing hold volume down + power.. bootlooder.. then flash magdlr 1.13 ... now the phone will boot into a black screen with written mangdlr.. wen the black screen magdlr screen comes then press power off for 5mintzz.. follow the guide to flash.. there is a stick thread in NAND DEVELOP... U can get the windows version back to your phone to get the warranty...
Sent from my HTC HD2 using Tapatalk

Ok ,, some good new at last ..
I have used the HSPL4 to change my 3.03hspl to 3.030000 spl...
Success, as when i go to the tri colour screen it says spl and no hint of hspl...
Bad news, is that i still cant get the rom flashing,, as it gets stuff at some point and mostly at 99%.. Have tried both ways through SD (leoimg) and through USB.
Now final question is ... When i on the phone a big logo of NRG (ENERGIZE) writtten comes up and it gets stuck there.. the phone has SPL .. so it still under warranty to return it?.. I still have all the void sticker intact.

boxboy said:
Now final question is ... When i on the phone a big logo of NRG (ENERGIZE) writtten comes up and it gets stuck there.. the phone has SPL .. so it still under warranty to return it?.. I still have all the void sticker intact.
Click to expand...
Click to collapse
did you try to flash just a splashscreen as i suggested in your other thread? (they can be flashed alone, no need for a whole rom, , just like radios)
if you can get a stock splashscreen on there you are sorted.

Maybe try to download the original Software from HTC.
With you serial number you can get the latest windows for this phone.
Flash the Software you get from HTC.
If this is working ok you can try to install any Android ROM.
Read at first this
http://forum.xda-developers.com/showthread.php?t=905841
Try to understand and follow the steps..
But if you have even no luck with original Windows soft. You will also (maybe) have a lot of probs. with Android..

Thank you guys for all your help..
I have flashed andriod on several phones some time ago and I actually forgot the right steps to follow.
But this phone is unique is not letting me finish.
After following all the right steps, i wasnt able to install a rom succesfully even after installing the HSPL... and I am also not able to install the factory rom from htc on either the hspl or spl settings.
But i now got rid of the NRG screen and I have also installed the spl 3.03.. When you on the phone, it displays software upgrade failed..
So I have now sent the mobile to HTC as it is under warranty. I will then re-flash andriod following the right steps and see what happens!
Thanks again!

My mobile came back from HTC with a week.. Looks like a brand new one!
In the letter it says the replaced IMEI, PCBA, FL BD, W/O_ REGIONAL_ID, LEO
WOW
GREAT PHONE... ITS MUCH FASTER THAN THE PREVIOUS ONE FOR SOME REASONS