Looking for the j16 modem to put on JFD. Searched forums but no dice. Wanna keep JFD incase of OTA update.
THANKS!
What's the difference between the JI5 and JI6 modem? I haven't been able to find it so far. I'm getting horrible battery life from JI5 and want to upgrade to JI6 stock if possible or go back to stock w/out losing everything.
sinean said:
Looking for the j16 modem to put on JFD.
Click to expand...
Click to collapse
No such thing. I've attached the J I 6 modem for you though...
I just extracted it from the JI6 update and zipped it up by itself.
epakrat75 said:
No such thing. I've attached the J I 6 modem for you though...
I just extracted it from the JI6 update and zipped it up by itself.
Click to expand...
Click to collapse
How do we install this?
I tried installing through clockwork recovery. It always hangs at the installing portion and I have to pull the battery after waiting 20 minutes.
Sent from my SGH-T959 using XDA App
SE7EN- said:
How do we install this?
Click to expand...
Click to collapse
Flash via ODIN. If you're not comfortable / able to do that then perhaps someone will make a flashable clockwork package for you instead.
Will this wipe my Rom and data? I'm kinda tired of constantly restoring all my apps, notifications, and getting my vibe back to my set up.
jrkart99 said:
I'm kinda tired of constantly restoring all my apps, notifications, and getting my vibe back to my set up.
Click to expand...
Click to collapse
Then don't flash things. Or make a proper backup.
Clockwork offers the ability to restore only the /data portion of a backup that you've made & Titanium Backup allows you to backup/restore all your app/data. Two valid options that will only add 5 minutes to your install time.
I don't see why you should be complaining if you're not making a backup and restoring it.
tjhart85 said:
Then don't flash things. Or make a proper backup.
Clockwork offers the ability to restore only the /data portion of a backup that you've made & Titanium Backup allows you to backup/restore all your app/data. Two valid options that will only add 5 minutes to your install time.
I don't see why you should be complaining if you're not making a backup and restoring it.
Click to expand...
Click to collapse
I wasn't complaining, just asking. I was using bionix 1.2, 1.3 then jumped up to 1.4 quickly. I am making back ups, i'm asking that if i install ji6,will i have reflash my rom and re install my apps, or can I just flash my back up thru clock and still have ji6.
Ps does this work and what are the benefits.
"No such thing. I've attached the J I 6 modem for you though...
I just extracted it from the JI6 update and zipped it up by itself.
Attached Files
modem_JI6.zip (3.78 MB, 8 views)"
Thanks for this! I would love it if someone could package a JI6 Clockwork flash. I am not comfortable with Odin. Mainly from the horror stories of not just noobs but some with some experience flashing complete roms.
The first thing I did when rooted and got OCLF, GPS fix and clockwork was to do full Titanium backups and a Nandriod and an original stock Rom. I have backups and have had to use 'em.
But for some reason I don't want to take the Odin plunge yet. I do not have a firmware lock out Vibrant.
Care to talk me into it? With Samsung and Tmobile's slow responses, I might be getting all my updates here soon. Hell to date, I have!
It's not a ROM. It's not a kernel. It's a baseband update. It doesn't wipe any data, just upgrades your baseband version. Your current baseband version can be found in Settings -> About Phone -> Baseband version.
+1 for a clockwork mod installable zip file! I really don't like Odin.
aloneinshadow said:
+1 for a clockwork mod installable zip file! I really don't like Odin.
Click to expand...
Click to collapse
Agreed. Do you by chance have a .zip for the JFD modem you could upload?
Odin flash worked perfectly thanks for this.
I Odined with j16 modem on Jfd I see not much difference... Maybe someone has the changelog...
Sent from my SGH-T959 using XDA App
adm1jtg said:
Odin flash worked perfectly thanks for this.
Click to expand...
Click to collapse
Are you guys using the 512 pit file and are you putting the zip in the "Phone" section or the PDA section? Thanks.
johnnyh64 said:
Are you guys using the 512 pit file and are you putting the zip in the "Phone" section or the PDA section? Thanks.
Click to expand...
Click to collapse
I too tried Odin and it said failed. I am on Bionix 1.4 with Voodoo. Should I disable Voodoo first? I didn't do it since it was flashing the modem and not the rom. Thanks.
Sent from my SGH-T959 using XDA App
apple_g said:
I too tried Odin and it said failed. I am on Bionix 1.4 with Voodoo. Should I disable Voodoo first? I didn't do it since it was flashing the modem and not the rom. Thanks.
Click to expand...
Click to collapse
From what I understand you ALWAYS want to disable Voodoo when flashing anything. It's also so easy to do it's worth it just in case.
I'm still wondering if you put the zip in the "phone" section or the "PDA" section? Do you also need the 512 pit file? Anyone?
Thanks alot. Your awesome
No. just modem.bin file in the phone section
johnnyh64 said:
Are you guys using the 512 pit file and are you putting the zip in the "Phone" section or the PDA section? Thanks.
Click to expand...
Click to collapse
Sent from my SGH-T959 using XDA App
Related
Can some one please tell me witch gps fix is the latest one and witch one in your opinion actually works. I see that a popular fix is the Dj05 radio fix and there is even a hardware fix out for the vibriant that bends the gps antenna contact. So witch one should I try first? witch actually works and witch are known not to work?
I searched and came up with a lot of different threads and I think we should consolidate all those threads and list all the fixes and make a poll asking witch fix worked better for the users. This is a very common problem and I am surprised there are no stickies threads been update regularly with the latest info. The biggest problem is that there are MANY threads about it and some are very old, not sure if there are better fixes now.
So please help me list and consolidate all those threads, I will update this post showing all your input. I also have 3 fascinates that all are a little different when it comes to gps and would love to try the fixes and post my results on all three.
Edit: I would also like to write the proper way to test your gps, I see some threads have this buried in between the gps fix steps and I would like to make it more obvious so if you know how to properly test the gps, let me know. I know there are some apps like gps test and status that show you lots of info, would be great to see a list results with a working gps and a faulty one.
thanks.
Dj05 solved my GPS woes.. insta-lock now..
Sent from my SCH-I500 using Tapatalk
When I was running stock, and rooted dI01 I laterally could not acquire a signal. I tried leaving it on, outside in the open, for over an hour, and nothing.
Going to dj05 I can lock within 10 seconds or less.
I am so impressed with the difference.
Dalamar1320 said:
When I was running stock, and rooted dI01 I laterally could not acquire a signal. I tried leaving it on, outside in the open, for over an hour, and nothing.
Going to dj05 I can lock within 10 seconds or less.
I am so impressed with the difference.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=869990&highlight=dj05
I tried following the guide on this link, successfully installed the radio via odin, tried installing the rom and kernel through clockwork but I do not have an option to choose zip file from sd card. the only option i get is to apply sdcard: update.zip. I changed the name of the rom zip file to update.zip and tried to flash it but it told me it failed to verify whole-file signature. What should I do now?
the guide does not explain much so I need some help.
Did you flash clockworkmod recovery through odin, then flash clockwork from rom manager? If so you should have an update.zip on your sd card that when applied takes you to clockwork then you can choose which zip to flash from there...
Sent from my SCH-I500 using XDA App
jiggaman508 said:
Did you flash clockworkmod recovery through odin, then flash clockwork from rom manager? If so you should have an update.zip on your sd card that when applied takes you to clockwork then you can choose which zip to flash from there...
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I do not think I flashed clockwork with odin, what I did is installed the dj05 Radio with odin by checking pda and finding the file, then pressing start. after that, the phone rebooted and I installed rom manager. Once in rom manager I installed the latest clockworkmod recovery 2.5.1.0. I do not have an update.zip file there on the root of my sdcard. what did I do wrong? How do I fix it? THanks
in about phone I can see that baseband version is s:i500 V.DJ05
The fascinate is different from other phones you need to flash clockwork through odin then in rom manager here is a link on how to flash through odin
http://forum.xda-developers.com/showthread.php?t=788099
Flash that, then delete any update.zips on your sd card, then in rom manager flash clockwork and it will download an update.zip that when applied from stock recovery will take you into clockwork... Once all that is done if you already have the modem installed boot into clockwork and select install zip and find the DJ05 rom you downloaded, flash that and you should be all set...
Sent from my SCH-I500 using XDA App
jiggaman508 said:
The fascinate is different from other phones you need to flash clockwork through odin then in rom manager here is a link on how to flash through odin
http://forum.xda-developers.com/showthread.php?t=788099
Flash that, then delete any update.zips on your sd card, then in rom manager flash clockwork and it will download an update.zip that when applied from stock recovery will take you into clockwork... Once all that is done if you already have the modem installed boot into clockwork and select install zip and find the DJ05 rom you downloaded, flash that and you should be all set...
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Thank you, I was just about to post that same link here and ask you if this was the correct guide to follow. I just booted into the familiar clockwork and now I am flashing all the good stuff. will update later.
well something went bad, I rebooted and I can see the samsung logo but the there is no splash screen after that only sound. the screen is completely black after that. NOW WHAT??
jonagpa said:
Thank you, I was just about to post that same link here and ask you if this was the correct guide to follow. I just booted into the familiar clockwork and now I am flashing all the good stuff. will update later.
Click to expand...
Click to collapse
No problem ill check back to make sure all went well
Sent from my SCH-I500 using XDA App
jiggaman508 said:
No problem ill check back to make sure all went well
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
that is really weird, same thing happen but I tried unlocking the phone event though the screen was completely black and it did unlock. Have you heard of this happening?
What did you flash?
Sent from my SCH-I500 using XDA App
jonagpa said:
that is really weird, same thing happen but I tried unlocking the phone event though the screen was completely black and it did unlock. Have you heard of this happening?
Click to expand...
Click to collapse
No that's different so it's working now though?
Sent from my SCH-I500 using XDA App
jiggaman508 said:
What did you flash?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=869990&highlight=dj05
go near the bottom of this guide, youll see system/rom and also kernel links. thats what I flashed.
jonagpa said:
http://forum.xda-developers.com/showthread.php?t=869990&highlight=dj05
go near the bottom of this guide, youll see system/rom and also kernel links. thats what I flashed.
Click to expand...
Click to collapse
You flashed both system and kernel? And did you wipe data/cache?
Sent from my SCH-I500 using XDA App
jiggaman508 said:
No that's different so it's working now though?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
yeah, seems to be working fine, I am afraid to reboot the phone and have it completely die on me. did I flash the correct kernel and rom?
jiggaman508 said:
You flashed both system and kernel? And did you wipe data/cache?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
yes flashed both in order that they are listed.
I did factory reset, I though cache was included in that reset, wrong?
jonagpa said:
yes flashed both in order that they are listed.
I did factory reset, I though cache was included in that reset, wrong?
Click to expand...
Click to collapse
No you should be ok, and if you flashed the rom/kernel from that thread you are good...
Sent from my SCH-I500 using XDA App
jiggaman508 said:
No you should be ok, and if you flashed the rom/kernel from that thread you are good...
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I rebooted and it does the same, no splash screen. I waited a few seconds to make sure it booted all the way and the screen turn on by it self. seems like somehow I messed up the splash screen. I am going to try and go back to stock then try this again. I tested the gps on all 3 of my phones. white one is still doing the best, OG one (stock) is still doing same as before and the new one with dj05 is using more sats that the OG(6/8), but the OG has more sats in view (5/9). Is that weird?
That djo5 kernel from thread does not support boot animations. It's normal for that kernel.
good day.
I thought about rooting, and started the process with the one click mod about a month ago. I got the superuser app in the process. Never went any further. Now I am trying to download the official froyo (which is technically on hold), but it aborts everytime. I am wondering if the superuser or CWM is causing this. I have done a wipe/factory reset three times. Any suggestions? Thanks.
jkmola said:
I thought about rooting, and started the process with the one click mod about a month ago. I got the superuser app in the process. Never went any further. Now I am trying to download the official froyo (which is technically on hold), but it aborts everytime. I am wondering if the superuser or CWM is causing this. I have done a wipe/factory reset three times. Any suggestions? Thanks.
Click to expand...
Click to collapse
I'd suggest updating by using the official Samsung update on their web site, which you can run from a PC. It seems to provide a much more trouble free update. It will also totally wipe your phone (but not the SD card) so be sure you have a way to restore your data.
http://www.samsung.com/us/support/downloads/SPH-D700ZKASPR
Assuming you have a PC, click on the software link, then click on the EXE link for the EB13 update. Install on your PC and follow the directions.
odin back to stock, use eb13 in the pda slot you will have a stock updated phone
i would also advise against updating ota because it's my understanding that it was problems with the ota process that caused sprint to pull the plug. it's really hard to adequately stress how simple using the samsung exe is. if you can turn on a computer you can have a fresh installation of eb13 froyo
wait for the actual fixed release from either sprint or samsung and use either the samsung tool or odin to do a clean install.
I have 2 Epics, one stock, one rooted and rommed. I ran the Samsung .exe
and it caused nothing but troubles on the stock, so had to return to 2.1.
To do so, either go to Service Center or run Odin.
This will also work to unroot and return to stock. The easiest instructions I have found to follow are on Android Central under Epic Forums. Look in Roms and Rooting Section in stickies. Title is something like unbrick. It gives all the links for downloads and how to's. You must be registered to use
but it is less techy there so might be easier to follow.
Thanks, everybody. I just finished the update via the samsung site. Phone just came back online. I will start messing around with it and see how everything worked out. Thanks again!
ilostmypistons said:
odin back to stock, use eb13 in the pda slot you will have a stock updated phone
Click to expand...
Click to collapse
When you odin all you put is the eb13 file in pda and nothing else? No pit? Also where can you get the eb13 stock tar?
Sent from my SPH-D700 using XDA Premium App
ErlyD said:
When you odin all you put is the eb13 file in pda and nothing else? No pit? Also where can you get the eb13 stock tar?
Click to expand...
Click to collapse
You get it right out of the installed .exe file you installed to.
Sent from Bonsai 6.0.3
i've been lookign and looking, and just can't find a solution to fixing my problem, not knowing any better I attempted to partition the phone through clockwork and now it no longer fully turns on (goes black after the S screen) and I've tried installing the stock Rom with Odin but it just simply does the same thing, is there a way I can delete the partition I created? i'm pretty sure that's the problem, but i'm not sure how to detect the phone's internal memory without having the phone on and mounting it...
Are you using the 512pit file and selecting repartition in Odin. Also which Odin flashable are you using. Go to Eugene's site, google ebproductions and find Froyo that doesn't brick.
Sent from my GT-I9000 using XDA Premium App
explodingboy70 said:
Are you using the 512pit file and selecting repartition in Odin. Also which Odin flashable are you using. Go to Eugene's site, google ebproductions and find Froyo that doesn't brick.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
this is what I was using . . .
http://forum.xda-developers.com/showthread.php?t=1047087
i'll try Froyo that doesn't brick, guess i'll let you know how it goes
Yeah, eugenes froyo that doesn't Brick + the normal jfd will get you back.
Basically, you are bricking your phone to fix it
s15274n said:
Yeah, eugenes froyo that doesn't Brick + the normal jfd will get you back.
Basically, you are bricking your phone to fix it
Click to expand...
Click to collapse
so are you saying to get eugene's froyo on, then do the install for the normal (i.e. the link i provided), and it should work?... hopefully...
if it doesn't (working on it now), is there a way to mount the internal memory onto my PC without the phone working, kind of like download mode? so that I could just simply delete the partition
Exactly, lovely guide you linked to by the way, Haha
Youtube it if you want to see the process
s15274n said:
Exactly, lovely guide you linked to by the way, Haha
Youtube it if you want to see the process
Click to expand...
Click to collapse
oh, it's your guide lol... just a quick question, do i have to do the whole dba reboot part for the froyo that doesn't brick? cuz i'm having trouble getting that to work, or can i just revert back to the original stock now?
yay, it worked... didn't have to do the whole adb thing
Just made a video for everyone on updating to stock EL30. I'll be doing more videos on El30 for sure.
How to Manually Update the Samsung Epic 4G to Stock EL30 Gingerbread:
http://www.youtube.com/watch?v=B3bccIXQSrU
Review of EL30 (There are some changes):
http://www.youtube.com/watch?v=30cW2WhL0KA
HOW TO ROOT ON EL30:
http://www.youtube.com/watch?v=kwFRzzIqouE
OP updated
Super fast with the vids as always! Thanks!
Oh...and first!
Has anyone experienced the boot loop issue like the last manual update to 22? I had to wipe my phone to fix...
Not sent from my Sprint Galaxy Nexus
If you did did the GPS Fix (assuming you're on stock BML EI22), then you will need to replace the system/vendor/bin/gpsd file or else you will get an Error Status 7 when you try to do the update. You can extract the file from the EI22.zip (If someone can post the file and host it, even better).
I haven't tested the GPS after updating so I don't know if the new gpsd file fixes anything or reverts things back to what they were (ie locking on only 3 or 4 sats). If it has reverted it back, then you will probably have to re-run the GPS Fix again.
i got an error "verifying the script(?)" i forgot the complete error message when i tried to install it from stock ei22 and stock recovery.
Do you think it has to do with the fact that I downloaded within the phone's webbrowser, and renamed it in ES explorer within the phone?
I have trouble mounting my phone to my computer, so i either have to download files to my phone directly from within its own webbrowser, or take the sd card out and mount that seperatly.
@qbking77: you don't need to rename the update file to update.zip since the GB roms the stock reccovery allows you to choose what zip to use.
For me I copied both updates to my card as update.zip, EI22 and update-EL30.zip then I:
1- ODIN'd to EC05
2- shutdown
3- 3 finger salute
4- flashed update.zip (EI22)
5- shutdown
6- 3 finger salute
7- flashed update-EL30.zip
After that I:
A- copied the su.zip that removes the reinstall of stock recovery,
B- ODIN'd cwm 3 but unchecked reboot.
C- pulled battery
D- 3 finger salute
E- flashed the aboved mentioned su.zip
F- flashed cwm5
G- rebooted
That left me with a stock kernel with root and custom recovery. Made a NANDROID and have been tinkering with it.
Right now I'm tring to get CRT-OFF to work.
Sent from my SPH-D700 using Tapatalk
futureprospect said:
i got an error "verifying the script(?)" i forgot the complete error message when i tried to install it from stock ei22 and stock recovery.
Do you think it has to do with the fact that I downloaded within the phone's webbrowser, and renamed it in ES explorer within the phone?
I have trouble mounting my phone to my computer, so i either have to download files to my phone directly from within its own webbrowser, or take the sd card out and mount that seperatly.
Click to expand...
Click to collapse
I recomend to mount the card seperatly or use airdroid from the market to transfer files from your comp to phone over wifi
Sent from my SPH-D700 using Tapatalk
futureprospect said:
i got an error "verifying the script(?)" i forgot the complete error message when i tried to install it from stock ei22 and stock recovery.
Do you think it has to do with the fact that I downloaded within the phone's webbrowser, and renamed it in ES explorer within the phone?
I have trouble mounting my phone to my computer, so i either have to download files to my phone directly from within its own webbrowser, or take the sd card out and mount that seperatly.
Click to expand...
Click to collapse
nevermind. I dled a curropt file. After redownloading it worked.
Thanks qb for the review and install. Btw ei22 had the loop-scrolling home screens too, but no biggie.
thanks for the post qbking. So seems like no real reason to update if you arnt using a stock rom?
Updated OP... Use the SAME method to root as EI22!
qbking77 said:
Updated OP... Use the SAME method to root as EI22!
Click to expand...
Click to collapse
Plus Toadlife has a prerooted kernel for this over in development which should help.
Sent from my SPH-D700 using XDA App
Do I need to unroot before I update?
Falhawk said:
Do I need to unroot before I update?
Click to expand...
Click to collapse
That is what the procedure does, yes.
Toadlife has both ODIN + Heimdall stock packages pre-loaded w/ kernel............these'll be especially useful to us folk that need to ODIN back to stock from MTD set-ups........then back up the chain to EL30 firmware.
Sent from my SPH-D700 using xda premium
Ok I am rooted but I have the stock EI22 Gingerbread, Firmware 2.3.5 and Kernel 2.6.35.7. I recieved my update today. Forgive me I am a noob. Do I still have to unroot this to complete stock or simply update my phone over the air?
I have the ACS Recovery V1.0.0.5 CWM4 based.
fatstrat67 said:
Ok I am rooted but I have the stock EI22 Gingerbread, Firmware 2.3.5 and Kernel 2.6.35.7. I recieved my update today. Forgive me I am a noob. Do I still have to unroot this to complete stock or simply update my phone over the air?
I have the ACS Recovery V1.0.0.5 CWM4 based.
Click to expand...
Click to collapse
No update from Sprint will ever work on a rooted phone.
Sent from my SPH-D700 using XDA App
brooksyx said:
thanks for the post qbking. So seems like no real reason to update if you arnt using a stock rom?
Click to expand...
Click to collapse
Even if you're using a stock rom I don't see much benefit in upgrading. GPS was still broken for me and they changed/removed things I liked in the older stock roms (ie: incoming call screen, the alarm screen [took me a while to figure out how to snooze this morning which meant I got to work on time ;-)], the scrolling wallpaper). All minor things but I didn't have any issues with EI22 so...
What's that EI29 build you have in your downloads folder, qbking77?
Mutiny32 said:
What's that EI29 build you have in your downloads folder, qbking77?
Click to expand...
Click to collapse
E4gt
Sent from my SPH-D700 using Tapatalk
I'm trying to update to 2.2.2, I downloaded and installed the first update, and I can successfully download the froyo update, but it won't go all the way through. It will finish downloading, prompt me to install, then power down to install, but when it installs it gets to about 35%, then shows the triangle with the ! In it and reboots. I'm rooted with stock everything, and have system reset twice hoping it would work. No luck.
Is anyone else having similar problems?
Sent from my SCH-I400 using XDA
JoshRoss70 said:
I'm trying to update to 2.2.2, I downloaded and installed the first update, and I can successfully download the froyo update, but it won't go all the way through. It will finish downloading, prompt me to install, then power down to install, but when it installs it gets to about 35%, then shows the triangle with the ! In it and reboots. I'm rooted with stock everything, and have system reset twice hoping it would work. No luck.
Is anyone else having similar problems?
Sent from my SCH-I400 using XDA
Click to expand...
Click to collapse
I had the same problem at first, but then this is what i did:
flashed ec07 odex
flashed dl17 odin image
then i just restarting the ota
If you still cant get it to work you can always flash the cwm files or odin files in the development section. But i would try ota first
abby_nitewolf said:
I had the same problem at first, but then this is what i did:
flashed ec07 odex
flashed dl17 odin image
then i just restarting the ota
If you still cant get it to work you can always flash the cwm files or odin files in the development section. But i would try ota first
Click to expand...
Click to collapse
Okay, couple of questions:
1. What would flashing the ec07 odex do?
2. What exactly does OTA stand for?
JoshRoss70 said:
Okay, couple of questions:
1. What would flashing the ec07 odex do?
2. What exactly does OTA stand for?
Click to expand...
Click to collapse
It would put any files that were missing, or deleted back on, including script files, bin fiiles etc.
OTA stands for Over The Air
Txwolf1980 said:
It would put any files that were missing, or deleted back on, including script files, bin fiiles etc.
OTA stands for Over The Air
Click to expand...
Click to collapse
What she said
Sent From My Rezound using Tapahoe
Txwolf1980 said:
It would put any files that were missing, or deleted back on, including script files, bin fiiles etc.
OTA stands for Over The Air
Click to expand...
Click to collapse
Okay, well before I started, I flashed the dl17 default image.
Sent from my SCH-I400 using XDA
JoshRoss70 said:
Okay, well before I started, I flashed the dl17 default image.
Sent from my SCH-I400 using XDA
Click to expand...
Click to collapse
abby_nitewolf said:
What she said
Sent From My Rezound using Tapahoe
Click to expand...
Click to collapse
What SHE said?! Listen you....
Josh, I'd grab the ec07 odex, flash it with PIT file (repartition off), then dl17 odex, flash it with no PIT file then try the OTA
I have the same prob. Is it failing, do you think, because the phone is rooted? I haven't tried any reimaging, just rooting.
bsmith1051 said:
I have the same prob. Is it failing, do you think, because the phone is rooted? I haven't tried any reimaging, just rooting.
Click to expand...
Click to collapse
Your problem is probably due to the current ROM you're using has removed some of the bloatware. When you remove bloatware you are unable to update your phone.
Sent from my SCH-I400 using XDA
Actually I'm not running a custom ROM. Literally all I've done was run a root tool, then installed Titanium Backup Free.
I'm going to try and re-image the phone using the stock DL17 but I'm not sure how. I've got the instructions for installing the rooted EC09 ROM but I don't think I'm supposed to use the I500.PIT? Is that specific to EC09, or is it specific to the phone model (and independent of ROM)?
UPDATE: I just realized there's a DL17 .PIT so nevermind! I'll be sure to use that.
bsmith1051 said:
Actually I'm not running a custom ROM. Literally all I've done was run a root tool, then installed Titanium Backup Free.
I'm going to try and re-image the phone using the stock DL17 but I'm not sure how. I've got the instructions for installing the rooted EC09 ROM but I don't think I'm supposed to use the I500.PIT? Is that specific to EC09, or is it specific to the phone model (and independent of ROM)?
UPDATE: I just realized there's a DL17 .PIT so nevermind! I'll be sure to use that.
Click to expand...
Click to collapse
If Odin fails when using the DL17 pit just try again without the pit.
abby_nitewolf said:
I had the same problem at first, but then this is what i did:
flashed ec07 odex
flashed dl17 odin image
then i just restarting the ota
If you still cant get it to work you can always flash the cwm files or odin files in the development section. But i would try ota first
Click to expand...
Click to collapse
i am having the same problem as the op
i am a kind of a noob
where can i find these to download
and
how do i go about installing them
thanks for any help
yhknq said:
i am having the same problem as the op
i am a kind of a noob
where can i find these to download
and
how do i go about installing them
thanks for any help
Click to expand...
Click to collapse
That one is not something I'm gonna try to cover in a post, if you are as inexperienced as you proclaim. If you want to come into IRC, I'll try to help ya out. That being said, googling 'ec07 stock odex' brought up the exact thread you need. It was the first hit.