I'm trying to update to 2.2.2, I downloaded and installed the first update, and I can successfully download the froyo update, but it won't go all the way through. It will finish downloading, prompt me to install, then power down to install, but when it installs it gets to about 35%, then shows the triangle with the ! In it and reboots. I'm rooted with stock everything, and have system reset twice hoping it would work. No luck.
Is anyone else having similar problems?
Sent from my SCH-I400 using XDA
JoshRoss70 said:
I'm trying to update to 2.2.2, I downloaded and installed the first update, and I can successfully download the froyo update, but it won't go all the way through. It will finish downloading, prompt me to install, then power down to install, but when it installs it gets to about 35%, then shows the triangle with the ! In it and reboots. I'm rooted with stock everything, and have system reset twice hoping it would work. No luck.
Is anyone else having similar problems?
Sent from my SCH-I400 using XDA
Click to expand...
Click to collapse
I had the same problem at first, but then this is what i did:
flashed ec07 odex
flashed dl17 odin image
then i just restarting the ota
If you still cant get it to work you can always flash the cwm files or odin files in the development section. But i would try ota first
abby_nitewolf said:
I had the same problem at first, but then this is what i did:
flashed ec07 odex
flashed dl17 odin image
then i just restarting the ota
If you still cant get it to work you can always flash the cwm files or odin files in the development section. But i would try ota first
Click to expand...
Click to collapse
Okay, couple of questions:
1. What would flashing the ec07 odex do?
2. What exactly does OTA stand for?
JoshRoss70 said:
Okay, couple of questions:
1. What would flashing the ec07 odex do?
2. What exactly does OTA stand for?
Click to expand...
Click to collapse
It would put any files that were missing, or deleted back on, including script files, bin fiiles etc.
OTA stands for Over The Air
Txwolf1980 said:
It would put any files that were missing, or deleted back on, including script files, bin fiiles etc.
OTA stands for Over The Air
Click to expand...
Click to collapse
What she said
Sent From My Rezound using Tapahoe
Txwolf1980 said:
It would put any files that were missing, or deleted back on, including script files, bin fiiles etc.
OTA stands for Over The Air
Click to expand...
Click to collapse
Okay, well before I started, I flashed the dl17 default image.
Sent from my SCH-I400 using XDA
JoshRoss70 said:
Okay, well before I started, I flashed the dl17 default image.
Sent from my SCH-I400 using XDA
Click to expand...
Click to collapse
abby_nitewolf said:
What she said
Sent From My Rezound using Tapahoe
Click to expand...
Click to collapse
What SHE said?! Listen you....
Josh, I'd grab the ec07 odex, flash it with PIT file (repartition off), then dl17 odex, flash it with no PIT file then try the OTA
I have the same prob. Is it failing, do you think, because the phone is rooted? I haven't tried any reimaging, just rooting.
bsmith1051 said:
I have the same prob. Is it failing, do you think, because the phone is rooted? I haven't tried any reimaging, just rooting.
Click to expand...
Click to collapse
Your problem is probably due to the current ROM you're using has removed some of the bloatware. When you remove bloatware you are unable to update your phone.
Sent from my SCH-I400 using XDA
Actually I'm not running a custom ROM. Literally all I've done was run a root tool, then installed Titanium Backup Free.
I'm going to try and re-image the phone using the stock DL17 but I'm not sure how. I've got the instructions for installing the rooted EC09 ROM but I don't think I'm supposed to use the I500.PIT? Is that specific to EC09, or is it specific to the phone model (and independent of ROM)?
UPDATE: I just realized there's a DL17 .PIT so nevermind! I'll be sure to use that.
bsmith1051 said:
Actually I'm not running a custom ROM. Literally all I've done was run a root tool, then installed Titanium Backup Free.
I'm going to try and re-image the phone using the stock DL17 but I'm not sure how. I've got the instructions for installing the rooted EC09 ROM but I don't think I'm supposed to use the I500.PIT? Is that specific to EC09, or is it specific to the phone model (and independent of ROM)?
UPDATE: I just realized there's a DL17 .PIT so nevermind! I'll be sure to use that.
Click to expand...
Click to collapse
If Odin fails when using the DL17 pit just try again without the pit.
abby_nitewolf said:
I had the same problem at first, but then this is what i did:
flashed ec07 odex
flashed dl17 odin image
then i just restarting the ota
If you still cant get it to work you can always flash the cwm files or odin files in the development section. But i would try ota first
Click to expand...
Click to collapse
i am having the same problem as the op
i am a kind of a noob
where can i find these to download
and
how do i go about installing them
thanks for any help
yhknq said:
i am having the same problem as the op
i am a kind of a noob
where can i find these to download
and
how do i go about installing them
thanks for any help
Click to expand...
Click to collapse
That one is not something I'm gonna try to cover in a post, if you are as inexperienced as you proclaim. If you want to come into IRC, I'll try to help ya out. That being said, googling 'ec07 stock odex' brought up the exact thread you need. It was the first hit.
Related
Looking for the j16 modem to put on JFD. Searched forums but no dice. Wanna keep JFD incase of OTA update.
THANKS!
What's the difference between the JI5 and JI6 modem? I haven't been able to find it so far. I'm getting horrible battery life from JI5 and want to upgrade to JI6 stock if possible or go back to stock w/out losing everything.
sinean said:
Looking for the j16 modem to put on JFD.
Click to expand...
Click to collapse
No such thing. I've attached the J I 6 modem for you though...
I just extracted it from the JI6 update and zipped it up by itself.
epakrat75 said:
No such thing. I've attached the J I 6 modem for you though...
I just extracted it from the JI6 update and zipped it up by itself.
Click to expand...
Click to collapse
How do we install this?
I tried installing through clockwork recovery. It always hangs at the installing portion and I have to pull the battery after waiting 20 minutes.
Sent from my SGH-T959 using XDA App
SE7EN- said:
How do we install this?
Click to expand...
Click to collapse
Flash via ODIN. If you're not comfortable / able to do that then perhaps someone will make a flashable clockwork package for you instead.
Will this wipe my Rom and data? I'm kinda tired of constantly restoring all my apps, notifications, and getting my vibe back to my set up.
jrkart99 said:
I'm kinda tired of constantly restoring all my apps, notifications, and getting my vibe back to my set up.
Click to expand...
Click to collapse
Then don't flash things. Or make a proper backup.
Clockwork offers the ability to restore only the /data portion of a backup that you've made & Titanium Backup allows you to backup/restore all your app/data. Two valid options that will only add 5 minutes to your install time.
I don't see why you should be complaining if you're not making a backup and restoring it.
tjhart85 said:
Then don't flash things. Or make a proper backup.
Clockwork offers the ability to restore only the /data portion of a backup that you've made & Titanium Backup allows you to backup/restore all your app/data. Two valid options that will only add 5 minutes to your install time.
I don't see why you should be complaining if you're not making a backup and restoring it.
Click to expand...
Click to collapse
I wasn't complaining, just asking. I was using bionix 1.2, 1.3 then jumped up to 1.4 quickly. I am making back ups, i'm asking that if i install ji6,will i have reflash my rom and re install my apps, or can I just flash my back up thru clock and still have ji6.
Ps does this work and what are the benefits.
"No such thing. I've attached the J I 6 modem for you though...
I just extracted it from the JI6 update and zipped it up by itself.
Attached Files
modem_JI6.zip (3.78 MB, 8 views)"
Thanks for this! I would love it if someone could package a JI6 Clockwork flash. I am not comfortable with Odin. Mainly from the horror stories of not just noobs but some with some experience flashing complete roms.
The first thing I did when rooted and got OCLF, GPS fix and clockwork was to do full Titanium backups and a Nandriod and an original stock Rom. I have backups and have had to use 'em.
But for some reason I don't want to take the Odin plunge yet. I do not have a firmware lock out Vibrant.
Care to talk me into it? With Samsung and Tmobile's slow responses, I might be getting all my updates here soon. Hell to date, I have!
It's not a ROM. It's not a kernel. It's a baseband update. It doesn't wipe any data, just upgrades your baseband version. Your current baseband version can be found in Settings -> About Phone -> Baseband version.
+1 for a clockwork mod installable zip file! I really don't like Odin.
aloneinshadow said:
+1 for a clockwork mod installable zip file! I really don't like Odin.
Click to expand...
Click to collapse
Agreed. Do you by chance have a .zip for the JFD modem you could upload?
Odin flash worked perfectly thanks for this.
I Odined with j16 modem on Jfd I see not much difference... Maybe someone has the changelog...
Sent from my SGH-T959 using XDA App
adm1jtg said:
Odin flash worked perfectly thanks for this.
Click to expand...
Click to collapse
Are you guys using the 512 pit file and are you putting the zip in the "Phone" section or the PDA section? Thanks.
johnnyh64 said:
Are you guys using the 512 pit file and are you putting the zip in the "Phone" section or the PDA section? Thanks.
Click to expand...
Click to collapse
I too tried Odin and it said failed. I am on Bionix 1.4 with Voodoo. Should I disable Voodoo first? I didn't do it since it was flashing the modem and not the rom. Thanks.
Sent from my SGH-T959 using XDA App
apple_g said:
I too tried Odin and it said failed. I am on Bionix 1.4 with Voodoo. Should I disable Voodoo first? I didn't do it since it was flashing the modem and not the rom. Thanks.
Click to expand...
Click to collapse
From what I understand you ALWAYS want to disable Voodoo when flashing anything. It's also so easy to do it's worth it just in case.
I'm still wondering if you put the zip in the "phone" section or the "PDA" section? Do you also need the 512 pit file? Anyone?
Thanks alot. Your awesome
No. just modem.bin file in the phone section
johnnyh64 said:
Are you guys using the 512 pit file and are you putting the zip in the "Phone" section or the PDA section? Thanks.
Click to expand...
Click to collapse
Sent from my SGH-T959 using XDA App
I just activated my girlfriend's phone and immediately it prompted for update, so I did. To my surprise it was not DL09, but instead EA28. So after some google searches I found this:
http://phandroid.com/2011/02/03/samsung-fascinates-ea28-update-coming-to-fix-emergency-calling-bug/
The site is basically right, they repackaged dl09 with the emergency calling bugfix and pushed it out with a new build number.
just got mine... I'm gonna have a seizure in a public place to test it out.
Does any one know if one click root will work with this update
Sent from my SCH-I500 using XDA App
Deathbeaver said:
Does any one know if one click root will work with this update
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
It worked for me on DL09 and this isn't that much different so I'd say yes.
Skrazz said:
just got mine... I'm gonna have a seizure in a public place to test it out.
Click to expand...
Click to collapse
Youtube...
The only other thing that worries me is odin I have no idea what version to get our how to use it....thanks an advance from noob
Sent from my SCH-I500 using XDA App
Deathbeaver said:
The only other thing that worries me is odin I have no idea what version to get our how to use it....thanks an advance from noob
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
There is a thread on ODIN. Simple directions, I thought.
Sent from my SCH-I500 using XDA App
So how does one "Make instantaneous emergency calls from a locked device in a time of need"?
Deathbeaver said:
The only other thing that worries me is odin I have no idea what version to get our how to use it....thanks an advance from noob
Just as a side note if your having to redo the phone from scratch make sure to put the pit file in the pit on odin otherwise the phone will not activate!
Click to expand...
Click to collapse
One Click root works just fine! Just completed root!
I believe I was able to root successfully but when I try to flash ClockwordMod, it doesn't seem to be working. ROM manager says its flashed and has the latest version, but when I boot into recovery it is definitely not ClockwordMod. I cannot do backups or choose a file from SD to install.
PantsOnFire said:
I believe I was able to root successfully but when I try to flash ClockwordMod, it doesn't seem to be working. ROM manager says its flashed and has the latest version, but when I boot into recovery it is definitely not ClockwordMod. I cannot do backups or choose a file from SD to install.
Click to expand...
Click to collapse
When you flash a new ROM it overwrites CWM, so you'll have to re-install it with Odin.
What is pit in general and why it is needed?
CNemo7539 said:
What is pit in general and why it is needed?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=771426
may answer some questions
http://forum.xda-developers.com/showthread.php?t=723596
may answer others
the search tool is great. google works too.
Update broke my phone!
I just saw a screen forcing the update upon my phone. I clicked "OK" but when the EA28 update installed itself on my phone, it locked my phone into a cycle of trying to install it again and again. The baseband version shows S:i500.04 V.EA28, the Build number shows SCH-I500.EA28, but the update keeps trying to install the update. It gives a Prompt to Install-Reboots Phone-Prompt to Install-Reboot Phone... I managed to get it to stop for a little while by scheduling a deferral of the update until tomorrow. Does anyone know how I can keep the update from trying to install?
Yeah I just went to ask if there is an update and it said yes. Afraid to update because who knows if it'll break root....
Sent from my SCH-I500 using XDA App
Why suggest people to mess with pit in odin? You do NOT need to do this. Geez, people make this mistake enough on their own. Pda, choose file, press start... thats it.
Sent from my stock 2.1 unrooted, fully bloated Fascinate
EA28 broke my phone
knmb323 said:
I just saw a screen forcing the update upon my phone. I clicked "OK" but when the EA28 update installed itself on my phone, it locked my phone into a cycle of trying to install it again and again. The baseband version shows S:i500.04 V.EA28, the Build number shows SCH-I500.EA28, but the update keeps trying to install the update. It gives a Prompt to Install-Reboots Phone-Prompt to Install-Reboot Phone... I managed to get it to stop for a little while by scheduling a deferral of the update until tomorrow. Does anyone know how I can keep the update from trying to install?
Click to expand...
Click to collapse
I managed to get my phone to stop rebooting every 3 minutes by ending the InnoPath Active Care process and clearing the cache. But when I woke up this morning, the phone was at the emergency recovery screen. It went into a cycle of rebooting that made it as far as media scanner. I got it to stop rebooting by turning ON wifi (I suppose that's because Active Care needs WiFi off to do an OTA). Does anyone have any suggestions on how to stop this "Feature" that is rebooting my phone?
You tried pulling the battery (soft reset) i presume? After that theres factory rest, then odin back to stock
Sent from my stock 2.1 unrooted, fully bloated Fascinate
I thought about rooting, and started the process with the one click mod about a month ago. I got the superuser app in the process. Never went any further. Now I am trying to download the official froyo (which is technically on hold), but it aborts everytime. I am wondering if the superuser or CWM is causing this. I have done a wipe/factory reset three times. Any suggestions? Thanks.
jkmola said:
I thought about rooting, and started the process with the one click mod about a month ago. I got the superuser app in the process. Never went any further. Now I am trying to download the official froyo (which is technically on hold), but it aborts everytime. I am wondering if the superuser or CWM is causing this. I have done a wipe/factory reset three times. Any suggestions? Thanks.
Click to expand...
Click to collapse
I'd suggest updating by using the official Samsung update on their web site, which you can run from a PC. It seems to provide a much more trouble free update. It will also totally wipe your phone (but not the SD card) so be sure you have a way to restore your data.
http://www.samsung.com/us/support/downloads/SPH-D700ZKASPR
Assuming you have a PC, click on the software link, then click on the EXE link for the EB13 update. Install on your PC and follow the directions.
odin back to stock, use eb13 in the pda slot you will have a stock updated phone
i would also advise against updating ota because it's my understanding that it was problems with the ota process that caused sprint to pull the plug. it's really hard to adequately stress how simple using the samsung exe is. if you can turn on a computer you can have a fresh installation of eb13 froyo
wait for the actual fixed release from either sprint or samsung and use either the samsung tool or odin to do a clean install.
I have 2 Epics, one stock, one rooted and rommed. I ran the Samsung .exe
and it caused nothing but troubles on the stock, so had to return to 2.1.
To do so, either go to Service Center or run Odin.
This will also work to unroot and return to stock. The easiest instructions I have found to follow are on Android Central under Epic Forums. Look in Roms and Rooting Section in stickies. Title is something like unbrick. It gives all the links for downloads and how to's. You must be registered to use
but it is less techy there so might be easier to follow.
Thanks, everybody. I just finished the update via the samsung site. Phone just came back online. I will start messing around with it and see how everything worked out. Thanks again!
ilostmypistons said:
odin back to stock, use eb13 in the pda slot you will have a stock updated phone
Click to expand...
Click to collapse
When you odin all you put is the eb13 file in pda and nothing else? No pit? Also where can you get the eb13 stock tar?
Sent from my SPH-D700 using XDA Premium App
ErlyD said:
When you odin all you put is the eb13 file in pda and nothing else? No pit? Also where can you get the eb13 stock tar?
Click to expand...
Click to collapse
You get it right out of the installed .exe file you installed to.
Sent from Bonsai 6.0.3
Just made a video for everyone on updating to stock EL30. I'll be doing more videos on El30 for sure.
How to Manually Update the Samsung Epic 4G to Stock EL30 Gingerbread:
http://www.youtube.com/watch?v=B3bccIXQSrU
Review of EL30 (There are some changes):
http://www.youtube.com/watch?v=30cW2WhL0KA
HOW TO ROOT ON EL30:
http://www.youtube.com/watch?v=kwFRzzIqouE
OP updated
Super fast with the vids as always! Thanks!
Oh...and first!
Has anyone experienced the boot loop issue like the last manual update to 22? I had to wipe my phone to fix...
Not sent from my Sprint Galaxy Nexus
If you did did the GPS Fix (assuming you're on stock BML EI22), then you will need to replace the system/vendor/bin/gpsd file or else you will get an Error Status 7 when you try to do the update. You can extract the file from the EI22.zip (If someone can post the file and host it, even better).
I haven't tested the GPS after updating so I don't know if the new gpsd file fixes anything or reverts things back to what they were (ie locking on only 3 or 4 sats). If it has reverted it back, then you will probably have to re-run the GPS Fix again.
i got an error "verifying the script(?)" i forgot the complete error message when i tried to install it from stock ei22 and stock recovery.
Do you think it has to do with the fact that I downloaded within the phone's webbrowser, and renamed it in ES explorer within the phone?
I have trouble mounting my phone to my computer, so i either have to download files to my phone directly from within its own webbrowser, or take the sd card out and mount that seperatly.
@qbking77: you don't need to rename the update file to update.zip since the GB roms the stock reccovery allows you to choose what zip to use.
For me I copied both updates to my card as update.zip, EI22 and update-EL30.zip then I:
1- ODIN'd to EC05
2- shutdown
3- 3 finger salute
4- flashed update.zip (EI22)
5- shutdown
6- 3 finger salute
7- flashed update-EL30.zip
After that I:
A- copied the su.zip that removes the reinstall of stock recovery,
B- ODIN'd cwm 3 but unchecked reboot.
C- pulled battery
D- 3 finger salute
E- flashed the aboved mentioned su.zip
F- flashed cwm5
G- rebooted
That left me with a stock kernel with root and custom recovery. Made a NANDROID and have been tinkering with it.
Right now I'm tring to get CRT-OFF to work.
Sent from my SPH-D700 using Tapatalk
futureprospect said:
i got an error "verifying the script(?)" i forgot the complete error message when i tried to install it from stock ei22 and stock recovery.
Do you think it has to do with the fact that I downloaded within the phone's webbrowser, and renamed it in ES explorer within the phone?
I have trouble mounting my phone to my computer, so i either have to download files to my phone directly from within its own webbrowser, or take the sd card out and mount that seperatly.
Click to expand...
Click to collapse
I recomend to mount the card seperatly or use airdroid from the market to transfer files from your comp to phone over wifi
Sent from my SPH-D700 using Tapatalk
futureprospect said:
i got an error "verifying the script(?)" i forgot the complete error message when i tried to install it from stock ei22 and stock recovery.
Do you think it has to do with the fact that I downloaded within the phone's webbrowser, and renamed it in ES explorer within the phone?
I have trouble mounting my phone to my computer, so i either have to download files to my phone directly from within its own webbrowser, or take the sd card out and mount that seperatly.
Click to expand...
Click to collapse
nevermind. I dled a curropt file. After redownloading it worked.
Thanks qb for the review and install. Btw ei22 had the loop-scrolling home screens too, but no biggie.
thanks for the post qbking. So seems like no real reason to update if you arnt using a stock rom?
Updated OP... Use the SAME method to root as EI22!
qbking77 said:
Updated OP... Use the SAME method to root as EI22!
Click to expand...
Click to collapse
Plus Toadlife has a prerooted kernel for this over in development which should help.
Sent from my SPH-D700 using XDA App
Do I need to unroot before I update?
Falhawk said:
Do I need to unroot before I update?
Click to expand...
Click to collapse
That is what the procedure does, yes.
Toadlife has both ODIN + Heimdall stock packages pre-loaded w/ kernel............these'll be especially useful to us folk that need to ODIN back to stock from MTD set-ups........then back up the chain to EL30 firmware.
Sent from my SPH-D700 using xda premium
Ok I am rooted but I have the stock EI22 Gingerbread, Firmware 2.3.5 and Kernel 2.6.35.7. I recieved my update today. Forgive me I am a noob. Do I still have to unroot this to complete stock or simply update my phone over the air?
I have the ACS Recovery V1.0.0.5 CWM4 based.
fatstrat67 said:
Ok I am rooted but I have the stock EI22 Gingerbread, Firmware 2.3.5 and Kernel 2.6.35.7. I recieved my update today. Forgive me I am a noob. Do I still have to unroot this to complete stock or simply update my phone over the air?
I have the ACS Recovery V1.0.0.5 CWM4 based.
Click to expand...
Click to collapse
No update from Sprint will ever work on a rooted phone.
Sent from my SPH-D700 using XDA App
brooksyx said:
thanks for the post qbking. So seems like no real reason to update if you arnt using a stock rom?
Click to expand...
Click to collapse
Even if you're using a stock rom I don't see much benefit in upgrading. GPS was still broken for me and they changed/removed things I liked in the older stock roms (ie: incoming call screen, the alarm screen [took me a while to figure out how to snooze this morning which meant I got to work on time ;-)], the scrolling wallpaper). All minor things but I didn't have any issues with EI22 so...
What's that EI29 build you have in your downloads folder, qbking77?
Mutiny32 said:
What's that EI29 build you have in your downloads folder, qbking77?
Click to expand...
Click to collapse
E4gt
Sent from my SPH-D700 using Tapatalk
So i used goo manager to install twrp on my att s4. I was running the new firmware. MF3. I rebooted my phone to find my self set right to download mode and it says, Could not do normal boot! Please help me, i would like the re flash that firmware but cant find it.
nicholascap said:
So i used goo manager to install twrp on my att s4. I was running the new firmware. MF3. I rebooted my phone to find my self set right to download mode and it says, Could not do normal boot! Please help me, i would like the re flash that firmware but cant find it.
Click to expand...
Click to collapse
so you were rooted and running MF3, you simply installed twrp via goo manager and the device only boots to the error/warning screen, right? normally, flashing the stock firmware via odin clears up this issue but in this case, you cannot flash back to MDL or MDB from MF3, nor is there an MF3 firmware tar that i've seen anywhere. hmmm...
Link me to a stock MF3 recovery.img and I can make it a .tar for you...
;44285866 said:
Link me to a stock MF3 recovery.img and I can make it a .tar for you...
Click to expand...
Click to collapse
Yea, good luck with that! Linking to the image I mean.
jd1639 said:
Yea, good luck with that! Linking to the image I mean.
Click to expand...
Click to collapse
Someone pulled it about a week back trying to make an MF3 ROM that doesn't lock things down... I'm not looking for it, my phone has and always will work...
Try this open back panel take out batt. get you s/number put everything back together and run kies emergency recovety. All you need is module number and s/number and it will reinstall back to stock had a similar issue my first hr with my SGS4
Sent from my SGH-I337 using xda premium
VICIOUSVIC1 said:
Try this open back panel take out batt. get you s/number put everything back together and run kies emergency recovety. All you need is module number and s/number and it will reinstall back to stock had a similar issue my first hr with my SGS4
Sent from my SGH-I337 using xda premium
Click to expand...
Click to collapse
That will also work, but wasn't he rooted on MF3? I've stopped following XDA for the most part since i have to lay low... MF3 has been rooted after a full update to it?
;44286151 said:
That will also work, but wasn't he rooted on MF3? I've stopped following XDA for the most part since i have to lay low... MF3 has been rooted after a full update to it?
Click to expand...
Click to collapse
Mf3 has been rooted, but no way to put on a custom recovery or return to stock via odin. There's no firmware available.
<=LongJohnSilver=> said:
That will also work, but wasn't he rooted on MF3? I've stopped following XDA for the most part since i have to lay low... MF3 has been rooted after a full update to it?
Click to expand...
Click to collapse
Rooted, yes, but no exploit or recovery.
jd1639 said:
Mf3 has been rooted, but no way to put on a custom recovery or return to stock via odin. There's no firmware available.
Click to expand...
Click to collapse
xBeerdroiDx said:
Rooted, yes, but no exploit or recovery.
Click to expand...
Click to collapse
Kies it is then...
@OP
Uninstall the Samsung USB Drivers
Run CCleaner
Reboot
Install Kies and do an Emergency firmware recovery with the phone in download mode
Ljs is hopefully here to stay.
jd1639 said:
Ljs is hopefully here to stay.
Click to expand...
Click to collapse
Never know...
No luck
xBeerdroiDx said:
so you were rooted and running MF3, you simply installed twrp via goo manager and the device only boots to the error/warning screen, right? normally, flashing the stock firmware via odin clears up this issue but in this case, you cannot flash back to MDL or MDB from MF3, nor is there an MF3 firmware tar that i've seen anywhere. hmmm...
Click to expand...
Click to collapse
Ya I have looked every where for the MF3 firmware no one has it. I'll try the kies idea
nicholascap said:
Ya I have looked every where for the MF3 firmware no one has it. I'll try the kids idea
Click to expand...
Click to collapse
Look in here:
http://forum.xda-developers.com/showthread.php?t=2378946
That recovery.img can be made into a .tar
EDIT - I dont see recovery.img, use KIES
Recovery img
Where on that page is the recovery.img? Is the it rom file?
;44287529 said:
Look in here:
http://forum.xda-developers.com/showthread.php?t=2378946
That recovery.img can be made into a .tar
EDIT - I dont see recovery.img, use KIES
Click to expand...
Click to collapse
But will the efuses allow it to be flashed?
nicholascap said:
Where on that page is the recovery.img? Is the it rom file?
Click to expand...
Click to collapse
I was mistaken, it's not there... Those are just dumps of his partitions... You are having a reccovery issue, since the stock 3e recovery is gone...
Just use KIES, follow my steps a few posts back to prevent a connectivity issue.
can you see if you can find that for me. thx
You have been banned for the following reason:
Hi Quasi, I hear Rootzwiki.com is very welcoming to new members.
Date the ban will be lifted: Never
You're going to have to better than that... I can and will create as many accounts as I please, spam if I want, and do everything I can to make your job harder.
Since yall have done me wrong in the past numerous times, it's my duty now to do yall wrong.
I told you you banned the wrong one...
KIES
KIES will only pull up a old firmware not the new one so it wont flash. IDK what to do now,