Can some one please tell me witch gps fix is the latest one and witch one in your opinion actually works. I see that a popular fix is the Dj05 radio fix and there is even a hardware fix out for the vibriant that bends the gps antenna contact. So witch one should I try first? witch actually works and witch are known not to work?
I searched and came up with a lot of different threads and I think we should consolidate all those threads and list all the fixes and make a poll asking witch fix worked better for the users. This is a very common problem and I am surprised there are no stickies threads been update regularly with the latest info. The biggest problem is that there are MANY threads about it and some are very old, not sure if there are better fixes now.
So please help me list and consolidate all those threads, I will update this post showing all your input. I also have 3 fascinates that all are a little different when it comes to gps and would love to try the fixes and post my results on all three.
Edit: I would also like to write the proper way to test your gps, I see some threads have this buried in between the gps fix steps and I would like to make it more obvious so if you know how to properly test the gps, let me know. I know there are some apps like gps test and status that show you lots of info, would be great to see a list results with a working gps and a faulty one.
thanks.
Dj05 solved my GPS woes.. insta-lock now..
Sent from my SCH-I500 using Tapatalk
When I was running stock, and rooted dI01 I laterally could not acquire a signal. I tried leaving it on, outside in the open, for over an hour, and nothing.
Going to dj05 I can lock within 10 seconds or less.
I am so impressed with the difference.
Dalamar1320 said:
When I was running stock, and rooted dI01 I laterally could not acquire a signal. I tried leaving it on, outside in the open, for over an hour, and nothing.
Going to dj05 I can lock within 10 seconds or less.
I am so impressed with the difference.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=869990&highlight=dj05
I tried following the guide on this link, successfully installed the radio via odin, tried installing the rom and kernel through clockwork but I do not have an option to choose zip file from sd card. the only option i get is to apply sdcard: update.zip. I changed the name of the rom zip file to update.zip and tried to flash it but it told me it failed to verify whole-file signature. What should I do now?
the guide does not explain much so I need some help.
Did you flash clockworkmod recovery through odin, then flash clockwork from rom manager? If so you should have an update.zip on your sd card that when applied takes you to clockwork then you can choose which zip to flash from there...
Sent from my SCH-I500 using XDA App
jiggaman508 said:
Did you flash clockworkmod recovery through odin, then flash clockwork from rom manager? If so you should have an update.zip on your sd card that when applied takes you to clockwork then you can choose which zip to flash from there...
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I do not think I flashed clockwork with odin, what I did is installed the dj05 Radio with odin by checking pda and finding the file, then pressing start. after that, the phone rebooted and I installed rom manager. Once in rom manager I installed the latest clockworkmod recovery 2.5.1.0. I do not have an update.zip file there on the root of my sdcard. what did I do wrong? How do I fix it? THanks
in about phone I can see that baseband version is s:i500 V.DJ05
The fascinate is different from other phones you need to flash clockwork through odin then in rom manager here is a link on how to flash through odin
http://forum.xda-developers.com/showthread.php?t=788099
Flash that, then delete any update.zips on your sd card, then in rom manager flash clockwork and it will download an update.zip that when applied from stock recovery will take you into clockwork... Once all that is done if you already have the modem installed boot into clockwork and select install zip and find the DJ05 rom you downloaded, flash that and you should be all set...
Sent from my SCH-I500 using XDA App
jiggaman508 said:
The fascinate is different from other phones you need to flash clockwork through odin then in rom manager here is a link on how to flash through odin
http://forum.xda-developers.com/showthread.php?t=788099
Flash that, then delete any update.zips on your sd card, then in rom manager flash clockwork and it will download an update.zip that when applied from stock recovery will take you into clockwork... Once all that is done if you already have the modem installed boot into clockwork and select install zip and find the DJ05 rom you downloaded, flash that and you should be all set...
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Thank you, I was just about to post that same link here and ask you if this was the correct guide to follow. I just booted into the familiar clockwork and now I am flashing all the good stuff. will update later.
well something went bad, I rebooted and I can see the samsung logo but the there is no splash screen after that only sound. the screen is completely black after that. NOW WHAT??
jonagpa said:
Thank you, I was just about to post that same link here and ask you if this was the correct guide to follow. I just booted into the familiar clockwork and now I am flashing all the good stuff. will update later.
Click to expand...
Click to collapse
No problem ill check back to make sure all went well
Sent from my SCH-I500 using XDA App
jiggaman508 said:
No problem ill check back to make sure all went well
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
that is really weird, same thing happen but I tried unlocking the phone event though the screen was completely black and it did unlock. Have you heard of this happening?
What did you flash?
Sent from my SCH-I500 using XDA App
jonagpa said:
that is really weird, same thing happen but I tried unlocking the phone event though the screen was completely black and it did unlock. Have you heard of this happening?
Click to expand...
Click to collapse
No that's different so it's working now though?
Sent from my SCH-I500 using XDA App
jiggaman508 said:
What did you flash?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=869990&highlight=dj05
go near the bottom of this guide, youll see system/rom and also kernel links. thats what I flashed.
jonagpa said:
http://forum.xda-developers.com/showthread.php?t=869990&highlight=dj05
go near the bottom of this guide, youll see system/rom and also kernel links. thats what I flashed.
Click to expand...
Click to collapse
You flashed both system and kernel? And did you wipe data/cache?
Sent from my SCH-I500 using XDA App
jiggaman508 said:
No that's different so it's working now though?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
yeah, seems to be working fine, I am afraid to reboot the phone and have it completely die on me. did I flash the correct kernel and rom?
jiggaman508 said:
You flashed both system and kernel? And did you wipe data/cache?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
yes flashed both in order that they are listed.
I did factory reset, I though cache was included in that reset, wrong?
jonagpa said:
yes flashed both in order that they are listed.
I did factory reset, I though cache was included in that reset, wrong?
Click to expand...
Click to collapse
No you should be ok, and if you flashed the rom/kernel from that thread you are good...
Sent from my SCH-I500 using XDA App
jiggaman508 said:
No you should be ok, and if you flashed the rom/kernel from that thread you are good...
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I rebooted and it does the same, no splash screen. I waited a few seconds to make sure it booted all the way and the screen turn on by it self. seems like somehow I messed up the splash screen. I am going to try and go back to stock then try this again. I tested the gps on all 3 of my phones. white one is still doing the best, OG one (stock) is still doing same as before and the new one with dj05 is using more sats that the OG(6/8), but the OG has more sats in view (5/9). Is that weird?
That djo5 kernel from thread does not support boot animations. It's normal for that kernel.
good day.
Related
I want to preface this by saying I have spent 4 hours trying to recover my phone and I have tried all the things suggested in the treads, including what worked for me last time.
I installed a kernal for using the buttons backlighting for notifications which apparently works on the Fascinate. My phone never rebooted from that. I tried to install Clockwork and install an update.zip or an old restore file and it would not read off my SD properly/was not effective. I then tried using Odin to flash over the system, kernal, and recovery. Still no dice. I formatted my sd and tried to install clockwork again and everytime I try to access it through installing update.zip it says that signature verification failed and the installation is aborted and does not even reach clockwork.
I hope someone can help me. I have tried everything I can think of and have had zero luck.
PS: Currently my phone will show SAMSUNG but keep looping
Did you have voodoo on your phone before you flashed the kernel?
Sent from my SCH-I500 using XDA App
ktez said:
Did you have voodoo on your phone before you flashed the kernel?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
No, I was running a deoxed .4 rom
Are you installing clockwork through Odin? I have had problems with getting clockwork to work if I installed it any other way. It should work through Odin tho - also was the kernel you flashed with the backlight notification the voodoo one or non-voodoo?
Sent from my SCH-I500 using XDA App
Also did you try wiping data? Even if you can't get into clockwork you can do it from the Samsung recovery. I would try that and then do all the Odin recovery stuff again and see if that helps - but if you flashed the voodoo kernel you will have to go thru the post on completely removing voodoo.
Sent from my SCH-I500 using XDA App
ktez said:
Are you installing clockwork through Odin? I have had problems with getting clockwork to work if I installed it any other way. It should work through Odin tho - also was the kernel you flashed with the backlight notification the voodoo one or non-voodoo?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I am installing through Odin. I don't know any other way to do it. I installed the non-voodoo one.
I installed this one since I heard it worked on our phone as well...
forumDOTxda-developersDOTcom/showthreadDOTphp?t=772672
"i9000_BacklightNotification_v1.6.zip"
ktez said:
Also did you try wiping data? Even if you can't get into clockwork you can do it from the Samsung recovery. I would try that and then do all the Odin recovery stuff again and see if that helps - but if you flashed the voodoo kernel you will have to go thru the post on completely removing voodoo.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I have wiped every data thing you can think of several times. And do you think it would hurt for me to try to remove voodoo even if I don't think I flashed that kernal
I'm hoping someone more experienced than me will take this one - I'm not sure if that backlight notification you flashed is compatible with the fascinate. That could be your problem. Can anybody else jump in here?
Sent from my SCH-I500 using XDA App
You flashed a i9000 kernel onto your Fascinate. Ay caramba.
DON'T FLASH NON-FASCINATE ROMS ONTO YOUR FASCINATE
Anyway, I can't think of anything except trying to flash the Fascinate CWM kernel back onto your phone again with Odin.
edit -- FYI, the only BLN kernels any Fascinate owner should be flashing are the ones from jt1134, available only via ROM Manager
s44 said:
You flashed a i9000 kernel onto your Fascinate. Ay caramba.
DON'T FLASH NON-FASCINATE ROMS ONTO YOUR FASCINATE
Anyway, I can't think of anything except trying to flash the Fascinate CWM kernel back onto your phone again with Odin.
edit -- FYI, the only BLN kernels any Fascinate owner should be flashing are the ones from jt1134, available only via ROM Manager
Click to expand...
Click to collapse
Figured as much... I read it worked and that is why I installed. Hopefully I can get a fix. Maybe I should do adb?
Hi guys, sorry if it is a stupid question, but am I okay to flash the stock recovery while I'm running cm7?
My battery life is horrible so I just want to try the work around that involves charging while the phone is off and we know cwm recovery doesn't work like that right now.
I would flash back to cwm 3 afterwards.
Sent from my HTC Glacier using XDA App
Wrong section
Sent from my HTC Glacier using XDA App
Here's a link to one of TrueBlue_Drew's =bazillion= answers to this question. His method allows you to have two versions of CW Recovery available via the Rom Manager. Since the Rom Manager does not support CW Recovery 3.x, that version is stored as "2.5.1.4". With CW 3, ROM Manager is used only for going back and forth between CW 2 and 3.
Hope this helps.
http://forum.xda-developers.com/showpost.php?p=10670110&postcount=531
shortskoolbus said:
Hi guys, sorry if it is a stupid question, but am I okay to flash the stock recovery while I'm running cm7?
My battery life is horrible so I just want to try the work around that involves charging while the phone is off and we know cwm recovery doesn't work like that right now.
I would flash back to cwm 3 afterwards.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
I've actually talked to TrueBlue and I came up with the idea of making the oemrecovery and renaming it, recovery-clockwork-2.5.1.1. He is supposed to be updating his guide here shortly but I just spoke with him regarding this last night.
Basically, download the oemrecovery, go to the clockwork folder on your sdcard and go clockworkmod>download>koush.tandgaming.com>recoveries. Drop the oemrecovery into that spot on the sdcard and rename it EXACTLY recovery-clockwork-2.5.1.1. Once that's done you can now go into rommanager scroll down to all clockworkmod recoveries and choose 2.5.1.1. That is now your stock recovery. you can reboot into the stock recovery, and keep the phone off to charge it. Once done, reboot the phone, go back to rommanager and click 2.5.1.4 and that will give you cwm3.xxx back. If this helps you, please hit the thanks button!
Thanks. Sorry for posting in the wrong section.
I'm aware I can flash back to 2.5.1.2, but for some reason I recall that this also went into recovery when charged. I'm probably wrong about that though .
amac, that sounds like a very elegant solution. I'll have too give that a shot.
I was really mostly concerned that not having 3.x would somehow affect the cm7 installation. But im guessing it should not and only affects ability to flash the rom.
Thanks again all. And for bearing with my ignorance!
Sent from my HTC Glacier using XDA App
Well i just checked, and 2.5.1.2 still turns on the phone when charging while powered off.
I've looked around but can't find it, is there a flashable stock recovery for the MT4G somewhere? I know there's an image posted here: http://forum.xda-developers.com/showthread.php?t=843289 but this one isn't flashable. But i guess i could still manage if there isn't one out there.
Thanks again everyone.
use the oemrecovery file found on page 118 of the cm6 thread. It was posted by phateless. Sorry I would link it but the xda app doesn't let you do that.
Sent from my HTC Glacier using XDA App
Awesome. working fine now.
Thanks again.
shortskoolbus said:
Awesome. working fine now.
Thanks again.
Click to expand...
Click to collapse
No problem. And if you haven't already, hit the thanks button if you so please
There's a new version of CWM in this link for the Froyo leak of Fascinate: http://forum.xda-developers.com/showthread.php?t=937499
I got Froyo just fine, but I just noticed as I'm trying to install a Froyo theme for Fascinate. I'm having trouble getting the new CWM Recovery to "take". Now when I go through ROM Manager to Reboot Into Recovery, it takes me to the stock recovery, but going to "Update.zip" makes a loading bar load about 1/4 of the bar, then it reboots, shows Samsung logo, and is back at stock recovery. Not sure what I'm doing wrong, any help? Is there any .TAR of the new CWM, so I can maybe use Odin to force it on? Thanks.
Get rid of the theme. That's probably the problem. And this should be posted under general or in the thread of whatever ROM you're using.
http://www.xda-developers.com/announcements/a-reminder-from-the-xda-moderator-team/
I'm not using a ROM, I'm trying to. I can't get into the new CWM recovery
Sent from my SCH-I500 using XDA App
This is the new recovery that you should be using now...
http://forum.xda-developers.com/showthread.php?t=942021
If you can't get to clockwork use the odin file
Sent from my SCH-I500 using XDA App
Oh good, I love Odin and I was hoping for such a file. I'll try this when I get home, thanks!
Sent from my SCH-I500 using XDA App
Posted this in another thread but this is how I did it.
Download the first file from http://forum.xda-developers.com/showthread.php?t=942021 and rename it recovery-update.zip put it in the clockworkmod folder on sd card, replacing the old recovery-update.zip.
Download the following file and place it at the root of your sd card, make sure its named update.zip.
http://dl.dropbox.com/u/17566514/update.zip use it to get into cwm.
Then boot to recovery, (apply update if you get blue writing, choose apply sdcard:update.zip). Once in green cwm choose to "install zip from sd card,"
navigate to your clockworkmod folder then choose the recovery-update.zip file.
Lastly go back to the main options and choose "apply sdcard:update.zip." you should be good to go now!
CWM should be red for now on, and should say voodoo lagfix.
Enjoy! I hope that clears things up!
I can't get past the blue I think when I get home I am odining everything back to normal
Sent from my SCH-I500 using XDA App
Taka, I don't have or want voodoo, does that make a difference?
Sent from my SCH-I500 using XDA App
Cwm red was optimized for voodoo, but this version works without it
Sent from my SCH-I500 using XDA App
minmongoblin said:
Taka, I don't have or want voodoo, does that make a difference?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
This version says Voodoo but isn't, the programmer was to lazy to change that (or a voodoo update for froyo will be here soon). Also the bitmap error happens to everyone so don't worry about it.
minmongoblin said:
I'm not using a ROM, I'm trying to. I can't get into the new CWM recovery
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Well you have Froyo, you must be using a ROM even if it is stock. Did you follow the directions closely when installing Froyo? And there are no custom kernels for DL30 so no worries about accidentally putting on voodoo.
Ahhhh!
I am having problems with CWM to the point where I can't install any roms nor can I reboot into CWM recovery. I just flashed DL09 and I am trying to flash froyo but I kinda need CWM to work in order to do that... I have an odin package for the version of CWM I supposedly need but it doesn't work, so should I go back to an older one?
Cant get to Green anymore
I updated to Froyo last week and everything is working fine except my battery life sucks...
Im going to upgrade to EB01 and try Super Clean
Ive installed the new CWM but I cant get to Green Recovery anymore.
Everytime I run update.zip, it simply brings up the Blue Recovery.
Try Taka's post on the first page. It worked for me, I'm now rocking the red CWM and running Incognito.
minmongoblin said:
Try Taka's post on the first page. It worked for me, I'm now rocking the red CWM and running Incognito.
Click to expand...
Click to collapse
But isnt RED if you have Voodoo? I dont have Voodoo. Im trying to get Green
rushfanx1 said:
But isnt RED if you have Voodoo? I dont have Voodoo. Im trying to get Green
Click to expand...
Click to collapse
If you are trying to run a Froyo ROM, even without voodoo, then in this situation you will be using a RED CWM.
Specifically, the one that was posted earlier or can be found here:
http://forum.xda-developers.com/showthread.php?t=942021
Even though it is red, even though you don't want voodoo, this really is the correct cwm for Froyo at this time.
Sorry to bother everybody once again but i ran into a little problem.
i tried restoring my image file from cwm and it just froze into the samsung screen, i tried clearing all the data,cache and dalvik and still wont work.
so i tried to flash odin files dj20 system and kernel and it worked for a while but when i restarted the phone it keeps going to the recovery screen, i do not know what else i can do. i tried so many searches on this forum and google and i cant find a way that works for me, so i am stuck at the recovery screen. please help.
Did you try my Magical Fix? (in General)
Sent from my SCH-I400 using XDA Premium App
trailblazer101 said:
Did you try my Magical Fix? (in General)
Sent from my SCH-I400 using XDA Premium App
Click to expand...
Click to collapse
yup and it wouldnt work, it kept telling me it failed, other people are telling me i have to repartition my phone and that i need a pit file but when i asked where do i get it they just told me to look for, i have been and i been at this for 4 hours now.
Did you re flash the old original recovery? Because there wouldn't be a failed error in the original one....
Sent from my SCH-I400 using XDA Premium App
Oh, and I have the pit if you need it.... But eh, I don't think you'll need it..... XP
Sent from my SCH-I400 using XDA Premium App
Just in case: http://www.mediafire.com/?7k4d3830rr4hvcg
Sent from my Continuum
well i tried everything and somehow i got it to boot up again, but....no wifi or 3g network works, so im guessing the radio file got deleted, is there a way to fix that or am i screwed
hardware version i400.0.6
model number SHC-I400
Firmware version 2.1-update1
baseband version S:i400.0.6v.DL17
kernel version 2.6.29
SHC-I400.DJ20
Yup, that's normal... re flash the cwm recovery through imnuts guide, and restore your backup
If you don't have one, then flash the DL17 clean rom...
Your radio is fine, btw xD
Oh, and also btw, be honest... After you followed the magical guide to the T, was that what you thought got it to work, or did you try something else in between? if you did something else, then I'll add it to the magical fix post xD thanks in advance
Sent from my Continuum
trailblazer101 said:
Yup, that's normal... re flash the cwm recovery through imnuts guide, and restore your backup
If you don't have one, then flash the DL17 clean rom...
Your radio is fine, btw xD
Oh, and also btw, be honest... After you followed the magical guide to the T, was that what you thought got it to work, or did you try something else in between? if you did something else, then I'll add it to the magical fix post xD thanks in advance
Sent from my Continuum
Click to expand...
Click to collapse
i dont think my radio is fine anymore, i was too impatient that i flashed the dl09 radio.
well i did alot, i cant really tell you what i did in exact order because there was too much at 4 in the morning after working on this for 6 hours but here we go:
odin cwm recovery
used new update.zip from cwm forum
tried flashing adryns rom and imnuts kernel
tried flashing dj20 system and kernel
fixed permissions
tried nandroid restore
used "magical fix"
had to reinstall my drivers for samsung because of magical fix
repartition device via odin
reflashed dj20 system and kernel via odin
radio file not working so i flashed dl09(because i was too impatient and panicking)
turned on, set up phone, turn off, download mode,
odin cwm recovery with former update.zip
cwm flashed adrynalynes rom and peanutbutterjelly kernel
rebooted, then rebooted back to recovery,
restored nandroid backup
phone works once again
i do not know if that helps, well thats all i did, and i believe it was it that order
You officially just tbagged your self now when it comes to updates xP
I told you nothing was wrong with the modem
Yes, a fascinate modem might work on our phone, but Now if we get an update, your not going to be able to flash it xP lol...
if this doesn't bother you, that's okay xD but if it does, there might be something you can do (aka... Pm me xP)
Sent from my Continuum
I know! Ahhh! I read that right after I had already flashed the radio. It kind of does bother me so I, pm'd you
Sent from my mind
You'll be able to flash an update via Clockwork when a ROM is created so I wouldn't worry too much.
Sent from my SCH-I400 using XDA App
Not unless someone modifies the update xD all you would have to do though is delete the modem-delta file xD
Sent from my Continuum
I am new to power using with phones. I had went to install syndicate and my phone had crashed, i finally got it up and running with oden once, Tried it again, this time i can't seem to get oden to work. At one point my phone wasn't even turning on or doing anything until i had taken it to a sprint store hoping my insurance would cover it.
I can get into clockwork.
I can get into download mode.
Oden is not working.
and Installing from zip is not working.
I could really use some help with this.
Thank you.
bloodywaterfox said:
I am new to power using with phones. I had went to install syndicate and my phone had crashed, i finally got it up and running with oden once, Tried it again, this time i can't seem to get oden to work. At one point my phone wasn't even turning on or doing anything until i had taken it to a sprint store hoping my insurance would cover it.
I can get into clockwork.
I can get into download mode.
Oden is not working.
and Installing from zip is not working.
I could really use some help with this.
Thank you.
Click to expand...
Click to collapse
Try another USB cable and also make sure it is plugged into the same USB port as before.
I've tried a couple already, any other idea's?
bloodywaterfox said:
I've tried a couple already, any other idea's?
Click to expand...
Click to collapse
Did u convert to ext4 before u tried to flash srf? Also srf didn't come with a kernel u need to flash a kernel right after the rom
Sent from my SPH-D700 using XDA Premium App
If there would be something wrong with the boot, is there a way to fix this? After using odin or installing from zip it goes right back into clockwork every time.
bloodywaterfox said:
If there would be something wrong with the boot, is there a way to fix this? After using odin or installing from zip it goes right back into clockwork every time.
Click to expand...
Click to collapse
U still didn't answer my question. If Odin doesn't recognize ur phone try installing the drivers again
Sent from my SPH-D700 using XDA Premium App
Esteway.619 said:
Did u convert to ext4 before u tried to flash srf? Also srf didn't come with a kernel u need to flash a kernel right after the rom
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
I have no idea, probably not. would you mind showing me how i can find these?
and I posted while you were posting.
I have tried several sets of drivers, and as far as i know odin reads/sees my phone fine.
bloodywaterfox said:
I have no idea, probably not. would you mind showing me how i can find these?
and I posted while you were posting.
I have tried several sets of drivers, and as far as i know odin reads/sees my phone fine.
Click to expand...
Click to collapse
Download and flash rfs2ext4 here's the link. http://forum.xda-developers.com/showthread.php?t=1109362
Edit: afther u flash this make sure u reflash the rom and then flash a kernel. Like genocide or twilight
Sent from my SPH-D700 using XDA Premium App
so i just run the zip from clockwork, then what? i'm a bit android illiterate, i really could use and appreciate the help.
This is what i did, not sure if it is right or not, however it didn't work.
wiped.
ran rfs2ext4.zip
ran syndicatefro110-fullyloaded-signed.zip
ran genocide2.0_voodoosnd10.zip
and it still keeps boot looping.
I have also been getting a E:cant open /cache/recovery/log
bloodywaterfox said:
This is what i did, not sure if it is right or not, however it didn't work.
wiped.
ran rfs2ext4.zip
ran syndicatefro110-fullyloaded-signed.zip
ran genocide2.0_voodoosnd10.zip
and it still keeps boot looping.
I have also been getting a E:cant open /cache/recovery/log
Click to expand...
Click to collapse
What recovery are u using?? I would say try to really install the drivers on your computer and use Odin to go back to stock and start fresh.
Sent from my SPH-D700 using XDA Premium App
Thanks everyone for the help anyways, I found a .tar file that was a full install for odin and now i have it up and running.
I also figured out what i was originally doing, rooting and installing syndicate.
Thanks guys.
He didn't install a kernel.