Database Users

[Q] Latest GPS FIX

Can some one please tell me witch gps fix is the latest one and witch one in your opinion actually works. I see that a popular fix is the Dj05 radio fix and there is even a hardware fix out for the vibriant that bends the gps antenna contact. So witch one should I try first? witch actually works and witch are known not to work?
I searched and came up with a lot of different threads and I think we should consolidate all those threads and list all the fixes and make a poll asking witch fix worked better for the users. This is a very common problem and I am surprised there are no stickies threads been update regularly with the latest info. The biggest problem is that there are MANY threads about it and some are very old, not sure if there are better fixes now.
So please help me list and consolidate all those threads, I will update this post showing all your input. I also have 3 fascinates that all are a little different when it comes to gps and would love to try the fixes and post my results on all three.
Edit: I would also like to write the proper way to test your gps, I see some threads have this buried in between the gps fix steps and I would like to make it more obvious so if you know how to properly test the gps, let me know. I know there are some apps like gps test and status that show you lots of info, would be great to see a list results with a working gps and a faulty one.
thanks.

Dj05 solved my GPS woes.. insta-lock now..
Sent from my SCH-I500 using Tapatalk

When I was running stock, and rooted dI01 I laterally could not acquire a signal. I tried leaving it on, outside in the open, for over an hour, and nothing.
Going to dj05 I can lock within 10 seconds or less.
I am so impressed with the difference.

Dalamar1320 said:
When I was running stock, and rooted dI01 I laterally could not acquire a signal. I tried leaving it on, outside in the open, for over an hour, and nothing.
Going to dj05 I can lock within 10 seconds or less.
I am so impressed with the difference.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=869990&highlight=dj05
I tried following the guide on this link, successfully installed the radio via odin, tried installing the rom and kernel through clockwork but I do not have an option to choose zip file from sd card. the only option i get is to apply sdcard: update.zip. I changed the name of the rom zip file to update.zip and tried to flash it but it told me it failed to verify whole-file signature. What should I do now?
the guide does not explain much so I need some help.

Did you flash clockworkmod recovery through odin, then flash clockwork from rom manager? If so you should have an update.zip on your sd card that when applied takes you to clockwork then you can choose which zip to flash from there...
Sent from my SCH-I500 using XDA App

jiggaman508 said:
Did you flash clockworkmod recovery through odin, then flash clockwork from rom manager? If so you should have an update.zip on your sd card that when applied takes you to clockwork then you can choose which zip to flash from there...
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I do not think I flashed clockwork with odin, what I did is installed the dj05 Radio with odin by checking pda and finding the file, then pressing start. after that, the phone rebooted and I installed rom manager. Once in rom manager I installed the latest clockworkmod recovery 2.5.1.0. I do not have an update.zip file there on the root of my sdcard. what did I do wrong? How do I fix it? THanks
in about phone I can see that baseband version is s:i500 V.DJ05

The fascinate is different from other phones you need to flash clockwork through odin then in rom manager here is a link on how to flash through odin
http://forum.xda-developers.com/showthread.php?t=788099
Flash that, then delete any update.zips on your sd card, then in rom manager flash clockwork and it will download an update.zip that when applied from stock recovery will take you into clockwork... Once all that is done if you already have the modem installed boot into clockwork and select install zip and find the DJ05 rom you downloaded, flash that and you should be all set...
Sent from my SCH-I500 using XDA App

jiggaman508 said:
The fascinate is different from other phones you need to flash clockwork through odin then in rom manager here is a link on how to flash through odin
http://forum.xda-developers.com/showthread.php?t=788099
Flash that, then delete any update.zips on your sd card, then in rom manager flash clockwork and it will download an update.zip that when applied from stock recovery will take you into clockwork... Once all that is done if you already have the modem installed boot into clockwork and select install zip and find the DJ05 rom you downloaded, flash that and you should be all set...
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Thank you, I was just about to post that same link here and ask you if this was the correct guide to follow. I just booted into the familiar clockwork and now I am flashing all the good stuff. will update later.

well something went bad, I rebooted and I can see the samsung logo but the there is no splash screen after that only sound. the screen is completely black after that. NOW WHAT??

jonagpa said:
Thank you, I was just about to post that same link here and ask you if this was the correct guide to follow. I just booted into the familiar clockwork and now I am flashing all the good stuff. will update later.
Click to expand...
Click to collapse
No problem ill check back to make sure all went well
Sent from my SCH-I500 using XDA App

jiggaman508 said:
No problem ill check back to make sure all went well
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
that is really weird, same thing happen but I tried unlocking the phone event though the screen was completely black and it did unlock. Have you heard of this happening?

What did you flash?
Sent from my SCH-I500 using XDA App

jonagpa said:
that is really weird, same thing happen but I tried unlocking the phone event though the screen was completely black and it did unlock. Have you heard of this happening?
Click to expand...
Click to collapse
No that's different so it's working now though?
Sent from my SCH-I500 using XDA App

jiggaman508 said:
What did you flash?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=869990&highlight=dj05
go near the bottom of this guide, youll see system/rom and also kernel links. thats what I flashed.

jonagpa said:
http://forum.xda-developers.com/showthread.php?t=869990&highlight=dj05
go near the bottom of this guide, youll see system/rom and also kernel links. thats what I flashed.
Click to expand...
Click to collapse
You flashed both system and kernel? And did you wipe data/cache?
Sent from my SCH-I500 using XDA App

jiggaman508 said:
No that's different so it's working now though?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
yeah, seems to be working fine, I am afraid to reboot the phone and have it completely die on me. did I flash the correct kernel and rom?

jiggaman508 said:
You flashed both system and kernel? And did you wipe data/cache?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
yes flashed both in order that they are listed.
I did factory reset, I though cache was included in that reset, wrong?

jonagpa said:
yes flashed both in order that they are listed.
I did factory reset, I though cache was included in that reset, wrong?
Click to expand...
Click to collapse
No you should be ok, and if you flashed the rom/kernel from that thread you are good...
Sent from my SCH-I500 using XDA App

jiggaman508 said:
No you should be ok, and if you flashed the rom/kernel from that thread you are good...
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I rebooted and it does the same, no splash screen. I waited a few seconds to make sure it booted all the way and the screen turn on by it self. seems like somehow I messed up the splash screen. I am going to try and go back to stock then try this again. I tested the gps on all 3 of my phones. white one is still doing the best, OG one (stock) is still doing same as before and the new one with dj05 is using more sats that the OG(6/8), but the OG has more sats in view (5/9). Is that weird?

That djo5 kernel from thread does not support boot animations. It's normal for that kernel.
good day.

CWM for 2.2

I just rooted my 2.2 vibrant! (came stock with 2.2) ! now im trying to flash clockworkmod but i get this error when i re-installl packages in the vibrant recovery screen.??
Can someone please show me a step by step on how to probprly make a 2.2 vibrant recongnize the clockwork recovery screen?!

You would have to ODIN to a ROM that comes with the 2E recover such as (eugenes froyo that doesnt brick) or a kernel that you can odin that has a modified 3E recovery that disables signature checking. Once you do that you can flash a kernel that has clockwork embeded into it such as overstock, tigers blood, voodoo, eugenes dead horse.

i think i need a step by step way too noob to understand what 3e and 2e is and what is ODIN i hear soo much about it! I bought the phone with 2.2 already on it so i havnt used ODIN at all to update my firmware!

Read the vibrant bible for about a week then try messing with your phone.
Sent from my SGH-T959 using XDA Premium App

the vibrant bible doesnt show me into detail how to work clockworkmod for 2.2 ! atleast not that i read! ill look again!

cardio11 said:
the vibrant bible doesnt show me into detail how to work clockworkmod for 2.2 ! atleast not that i read! ill look again!
Click to expand...
Click to collapse
the bible specifically doesnt tell you everything but it links you to everything you need to know if you are still having trouble read the noob guide.
http://forum.xda-developers.com/showthread.php?t=849028
after youve read that then go through the stickies posted in the vibrant general section and make sure you know what you are doing.
Cheers

iVE BEEN USING THE nOOB gUIDE but it didnt get into specfics of how to get 2.2 to recongnize cwr! I think the noob quide was using 2.1!

cardio11 said:
iVE BEEN USING THE nOOB gUIDE but it didnt get into specfics of how to get 2.2 to recongnize cwr! I think the noob quide was using 2.1!
Click to expand...
Click to collapse
your easiest method to get CWM working (and i'm assuming your end goal is to flash a rom) is to odin BACK to JFD (the stock shipped 2.1 rom for the vibrant) and then flash your rom.
There is no other easier way to do it (especially since you're not really sure what odin is, so using the other method to replace the stock 3e recovery with a fixed 3e recovery requires SOME technical knowledge of mounting partitions and getting root using superoneclick).

I sEE its starting to make sense now! After i switch back toJFD using ODIN will i have to re root my phone or does it stay rooted?

cardio11 said:
I sEE its starting to make sense now! After i switch back toJFD using ODIN will i have to re root my phone or does it stay rooted?
Click to expand...
Click to collapse
if you're end goal is to flash a rom, and you've already used CWM before using the update.zip method, unless you've deleted the update.zip from your sdcard, there is no need to root when using 2e recover (the stock 2.1 recovery) to get CWM working. You will have to manually boot up the phone into recovery (using vol+ and vol- and power) and then reinstall packages.

Thanks alot i appreciate the help! Ill try this after work and report back if i had any more issues.

ODIN a stock+voodoo kernel, reboot to recovery, flash a rom with cwm
Sent from my SGH-T959 using XDA App

So what ur saying is get rid of froyo 2.2 entirly.. Odin back to 2.1 use voddooo with a rom such as trigger? .....
No more 2.2?
Sent from my SGH-T959 using XDA App

:s
Sent from my SGH-T959 using XDA App

If you're entire goal is to get root in order to flash a Rom, why go through all the trouble (which by the confusion your having, there will be) just to flash a custom Rom?
The easiest way is to odin jfd to your phone. Then put the cwm update.zip on your internal sd card as well as your Rom of choice and flash that way.
The way that you're currently wanting to do requires you to get at the very least temp root, mount /system as rw, the copy over a modified recovery file, all assuming you don't run into errors about having enough free space on /system.
Now, which way seems easier?
Sent from my SGH-T959 using XDA App

Wouldnt it be ezr to download the recovery 3e.zip to your download file on phone directly from the internet, then copy the zip file and move to the appropriate file on phone useing a file manager ..then just robooting to recovery reonstallingand completly avoiding a computer
Sent from my SGH-T959 using XDA App

Well, you have to have root first. To get rust on your 2.2 rom requires a computer and there's also the fact that you may not even have enough room on your /system partition. If it were easier, the easier method would have been told to you within the first 3 posts.
Sent from my SGH-T959 using XDA App

But im rooted alredy
Sent from my SGH-T959 using XDA App

cardio11 said:
But im rooted alredy
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
i give up...

this is what help me and it worked http://forum.xda-developers.com/showthread.php?t=833423
the info below is on page 12 on the above link F.Y.I
1. get superoneclick root application (its on the forums just search for it.)
2. plug phone into computer then open superoneclick application
3. click on shell root (i used psneuter method) in the application and let it do its thing
4. Once you get a message that you have shell root, download the 3e recovery from OP and unzip to desktop. (DO NOT restart phone!!!)
5. run the .BAT file in the unzipped folder.
6. go through the steps and choose to restart when done (it will show as recommended)
You are now done!
Let me know how it goes

Help with epic

I am new to power using with phones. I had went to install syndicate and my phone had crashed, i finally got it up and running with oden once, Tried it again, this time i can't seem to get oden to work. At one point my phone wasn't even turning on or doing anything until i had taken it to a sprint store hoping my insurance would cover it.
I can get into clockwork.
I can get into download mode.
Oden is not working.
and Installing from zip is not working.
I could really use some help with this.
Thank you.

bloodywaterfox said:
I am new to power using with phones. I had went to install syndicate and my phone had crashed, i finally got it up and running with oden once, Tried it again, this time i can't seem to get oden to work. At one point my phone wasn't even turning on or doing anything until i had taken it to a sprint store hoping my insurance would cover it.
I can get into clockwork.
I can get into download mode.
Oden is not working.
and Installing from zip is not working.
I could really use some help with this.
Thank you.
Click to expand...
Click to collapse
Try another USB cable and also make sure it is plugged into the same USB port as before.

I've tried a couple already, any other idea's?

bloodywaterfox said:
I've tried a couple already, any other idea's?
Click to expand...
Click to collapse
Did u convert to ext4 before u tried to flash srf? Also srf didn't come with a kernel u need to flash a kernel right after the rom
Sent from my SPH-D700 using XDA Premium App

If there would be something wrong with the boot, is there a way to fix this? After using odin or installing from zip it goes right back into clockwork every time.

bloodywaterfox said:
If there would be something wrong with the boot, is there a way to fix this? After using odin or installing from zip it goes right back into clockwork every time.
Click to expand...
Click to collapse
U still didn't answer my question. If Odin doesn't recognize ur phone try installing the drivers again
Sent from my SPH-D700 using XDA Premium App

Esteway.619 said:
Did u convert to ext4 before u tried to flash srf? Also srf didn't come with a kernel u need to flash a kernel right after the rom
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
I have no idea, probably not. would you mind showing me how i can find these?
and I posted while you were posting.
I have tried several sets of drivers, and as far as i know odin reads/sees my phone fine.

bloodywaterfox said:
I have no idea, probably not. would you mind showing me how i can find these?
and I posted while you were posting.
I have tried several sets of drivers, and as far as i know odin reads/sees my phone fine.
Click to expand...
Click to collapse
Download and flash rfs2ext4 here's the link. http://forum.xda-developers.com/showthread.php?t=1109362
Edit: afther u flash this make sure u reflash the rom and then flash a kernel. Like genocide or twilight
Sent from my SPH-D700 using XDA Premium App

so i just run the zip from clockwork, then what? i'm a bit android illiterate, i really could use and appreciate the help.

This is what i did, not sure if it is right or not, however it didn't work.
wiped.
ran rfs2ext4.zip
ran syndicatefro110-fullyloaded-signed.zip
ran genocide2.0_voodoosnd10.zip
and it still keeps boot looping.
I have also been getting a E:cant open /cache/recovery/log

bloodywaterfox said:
This is what i did, not sure if it is right or not, however it didn't work.
wiped.
ran rfs2ext4.zip
ran syndicatefro110-fullyloaded-signed.zip
ran genocide2.0_voodoosnd10.zip
and it still keeps boot looping.
I have also been getting a E:cant open /cache/recovery/log
Click to expand...
Click to collapse
What recovery are u using?? I would say try to really install the drivers on your computer and use Odin to go back to stock and start fresh.
Sent from my SPH-D700 using XDA Premium App

Thanks everyone for the help anyways, I found a .tar file that was a full install for odin and now i have it up and running.
I also figured out what i was originally doing, rooting and installing syndicate.
Thanks guys.

He didn't install a kernel.

Can't mount internal or external storage

0.00 internal storage and the external reads 0. I have flashed every Odin file I could find, tried the heimdall one click. Nothing is working. Any ideas? I promised the phone to my father in law and he is in town for the weekend.
Sent from my Triumph using xda premium

Wow have you tried Eugene Froyo umm no brick rom? Also have you tried to partition the phone?
Sent from my GT-I9000 using Tapatalk

iwillkillyou said:
Wow have you tried Eugene Froyo umm no brick rom? Also have you tried to partition the phone?
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Sure did. About 59 times already lol. Repartition has no effect.
Sent from my Triumph using xda premium

Hmm how about making your phone soft brick, then use odin.
Sent from my GT-I9000 using Tapatalk

I don't really know, but here are some ideas.
Did you disable voodoo lagfix?
Try "eugenes froyo that doesn't brick" for the 60th time.
On ODIN put a check mark next to Re-Partition, but you said that had no effect.
Hmmmmmm, I bet eugene knows the answer. I feel like there is a thread somewhere that discusses this issue.
If you figure it out, let us know!

SamsungVibrant said:
I don't really know, but here are some ideas.
Did you disable voodoo lagfix?
Try "eugenes froyo that doesn't brick" for the 60th time.
On ODIN put a check mark next to Re-Partition, but you said that had no effect.
Hmmmmmm, I bet eugene knows the answer. I feel like there is a thread somewhere that discusses this issue.
If you figure it out, let us know!
Click to expand...
Click to collapse
I was on cm7. No voodoo. I didn't have a SD in the phone and plugged it in for mass storage. Upon realizing that, I popped one in with the phone still connected. That's when I noticed the problem. I haven't been using my phone. I Odin'd from cm7 weeks ago and didn't touch the phone until I plugged it in for mass storage.
Sent from my Triumph using xda premium

Bump it up. Still stuck.
Sent from my MOTWX435KT using xda premium

maybe the information in this post will help?
http://forum.cyanogenmod.com/topic/...ternal-storage/page__view__findpost__p__67870

Take a look at this, not sure if it's the same thing as that on cyanogenmod link above:
http://forum.xda-developers.com/showthread.php?t=1230059

I hope this will help
I had the same issue when I was coming back to a froyo rom from CM 7.1, I did everything you did flashed froyo that didn't brick and nothing so this is what I did I used Odin JI6 file from this thread ODIN JI6 and the zip comes with ODIN 1.3, 512 PIT,T959UVJI6.TAR. I used that version of odin 1.3 to flash JI6 tar and pit files and checked re partition, when it rebooted it was stuck at the factory recovery so I pulled the battery, held vol up vol down and plugged in the usb cord to get back into download mode. Now I opened ODIN 1.7(DL LINK) and flashed froyo that doesn't brick also check re partition when it re boots it will go into a boot loop you know this, so THEN yes one more odin I kept the same version of odin open 1.7 and I flashed Eugene_2E_JK2_Froyo.zip also with re partition checked. After all this I was still having issues with market then I cleared market catch installed trigger rom and now I can install apps again I would like to tell you the three odins was unnecessary but it wasn't until odin with JI6 that now my phone work right as for CM roms I never have one issue flashing then but if I want to revert back to a 2.2 rom it's a all day event hope this helps
EDIT LOL try the two peoples above me^^^ method first they seem to be on the right track ^^^

Also noticed that when I flash JFD, I get no errors(datadata, sd card, mmcblk0) in recovery after it boots from odin. The catch is, it goes black after the boot animation. Only the soft keys will light up. Really super stumped. Adb wont see my phone, so its making it really hard to manually repartition the internal storage. I have never been a adb wiz.

I thought you got this fixed?

Br1cK'd said:
I thought you got this fixed?
Click to expand...
Click to collapse
Negative Ghostrider I thought I did. But no dice.

Well damn. Have you tried different versions of Odin? What about a Voodoo kernel and conversion, any difference? There is something I remember reading a while back about an issue like this, I don't remember exactly what it said, but I'll try to find it for you.
Sent from my ZenDroid, meditating on the XDA App

I can't find the thread I was thinking of, sorry. I was thinking that your issue here sounds very similar to when people had done the partitioning via rom manager/cwm. Perhaps fixes for that will lead you in the right direction.
Sent from my ZenDroid, meditating on the XDA App

Update:
Still no luck. But after screwing with it, it now says I have a damaged internal SD, doest say blank internal SD anymore. I think that the phone is all done : (
Sent from my MOTWX435KT using xda premium

Dan_Brutal said:
Update:
Still no luck. But after screwing with it, it now says I have a damaged internal SD, doest say blank internal SD anymore. I think that the phone is all done : (
Sent from my MOTWX435KT using xda premium
Click to expand...
Click to collapse
format the sd card

laylovj said:
format the sd card
Click to expand...
Click to collapse
Doesn't work. If there was a actual/physical button for it, I would have worn it out already haha.
Sent from my MOTWX435KT using xda premium

Dan, sounds like it's time for a new Galaxy S2!

Vibrantnew-b said:
Dan, sounds like it's time for a new Galaxy S2!
Click to expand...
Click to collapse
Sure does. Im going to jump on the new T-Mobile pre-paid plan. $70 a month for unlimited everything with 5gb of 4g speed before they throttle you. Use my old ass G1 until I either get a sgs2 or a prime.
I was reading a thread about the storage issue(http://forum.xda-developers.com/showthread.php?t=957615), and Im 300% sure that the phone is ****ed. I think I roasted the internal storage completely. A true brick. Do I get a cookie for bricking the un-brickable?

[TIP] Going back to stock EB13.!

Okay guys, So lets say you flashed a custom rom on your epic. The rom was crap and you didnt like it. So you boot into CWM or w.e your Custom Recovery is and you restore your backup. After the backup is restore you end up with the Samsung Boot Logo STUCK.! This can be caused by incompatibility within the roms. Nandroid restore dosent always work when reverting back to stock from a custom rom, Unless your nandroid back up is from another custom rom. So this is a tip or flashing you phone back to Stock EB13. Its even better if you have a stock nandroid backup because restoring the backup whilst having this stock rom installed will work.! Go to this site http://www.samsdroid.com/2011/11/samsung-sph-d700-epic-4g-stock-rom.html and download the stock rom of your choice. Place the rom on your SD card. NOTE: Use sdcard in another phone since yours is bricked, or if you have a Micro Sd Reader use that. Boot up into Recovery and flash the rom. Congrats you are now back to stock and can do a Nandroid Restore. No ODIN, NO HARD WORK.! Happy Flashing
LINK FOR SW UPGRADE if the above method dosent work for you: http://ifile.it/8alqt5h/Epic4G_FroyoUpgrade_EB13_Tool.exe

Did you check the links before you posted this? They're all dead.
And they're all links to leaked firmware, not stable ones officially released by Samsung(With the exception of EB13).

The links aren't dead when I check them. If the links didn't help you out. Then google "Sph d700 SW upgrade tool" Its a utility that automatically flashes phone back to stock EB13. Just put the phone into download mode, by holding. "1" button on keyboard and hold power and plug in the pc. Follow the on screen instructions. If you can't find it PM me and ill upload it to 4shared for you to download.
Sent from my SPH-D700 using xda premium

I am by no means an expert but... If you are coming from an MTD ROM, you have to use the victory.pit file to repartition the NAND back to BML. To my knowledge, there is no way to do this from CWM (is the recovery partition rewritten when repartitioning?). If that executable linked at the end of the post can reproduce the partitioning that Odin does, then yes, but you still must have the windows drivers, a good USB cable and be plugged into a good USB port. At that point, why not use Odin.
Sent from my SPH-D700 using XDA App

You are indeed correct. The SW upgrade is the linked .exe for inexperienced user. Not everyone knows how to use Odin. Yes it may be simple to us but a pain to others. Im pretty sure if people are flashing roms, the samsung drivers should already be installed on there computer. The sw upgrade comes with the DOWNLOAD MODE Driver, So that when you plug the phone into the computer whilst in download the drivers are automatically installed. Within a couple of clicks you are back to stock EB13. From there you can re-root using the one click and do Nandroid Restore.

There is already a guide for this
Sent from my SPH-D700 using Tapatalk 2

There are but there all explained in different ways. This is the easy way to explain the method above. Just download and follow the instructions. Alot of people are using odin. And alot of people are struggling when using it because of the lack of knowledge. So Im just putting this method back out there to remind users that this is also possible if you do not understand odin.

AnDrOpErZ said:
There are but there all explained in different ways. This is the easy way to explain the method above. Just download and follow the instructions. Alot of people are using odin. And alot of people are struggling when using it because of the lack of knowledge. So Im just putting this method back out there to remind users that this is also possible if you do not understand odin.
Click to expand...
Click to collapse
I agree with this but 90% of people here are on MTD and will brick by doing this. Also, when recovery works you can just flash another ROM. Still a good guide.
Sent from my SPH-D700 using Tapatalk 2

Thanks, And i actually flash other ROMs if i end up with a brick. But the first time i flashed CM9 i missed a step and bricked, and it wouldnt let me flash another rom without the samsung screen hanging. So i used this utility to get back to stock, root, and restore backup. Great tool for people who still enjoy great ol' BML. Thanks for the compliment. By the way love your theming dude.

AnDrOpErZ said:
LINK FOR SW UPGRADE if the above method dosent work for you: http://ifile.it/8alqt5h/Epic4G_FroyoUpgrade_EB13_Tool.exe
Click to expand...
Click to collapse
http://www.mediafire.com/file/bpgsh6udv1gd8nj/Epic4G_FroyoUpgrade_EB13_Tool.exe
Please give me credit to!

disturb3d1 said:
http://www.mediafire.com/file/bpgsh6udv1gd8nj/Epic4G_FroyoUpgrade_EB13_Tool.exe
Please give me credit to!
Click to expand...
Click to collapse
OP is no longer maintaining this thread and has left the forum.
Mr Glass- may we have a lock, please?
(Hmmm- "glasslock"? Maybe your alter ego?)
Sent from my SPH-D700 using xda premium