Database Users

Artemis Unlock Step by Step

This method unlock your CID and SIM.
Instruction:
FIRST THINGS FIRST
REMOVE ANY PIN and LOCK CODES FROM YOUR PHONE BEFORE GOING ANY FURTHER
ALSO REMOVE ANY SD CARD ABOVE 2GB
1. Download: Artemis Sim Unlock and files below(it contains all we need)
2. Install WST v4.2.2 setup.exe
2a. Install the 2 cab files to your device Cert_spcs.cab and enable rapi.cab (note It Seems Most people must install "EnableRapi.cab" and "Cert_SPCS.cab" manually so you may aswell do it to save any problems Files below)
3. Launch WST and click on Enable RAPI
4. Click <Repair IMEI> and then enter the new: 355046015665718 (save your current original IMEI before change - you have to go back to it later)
5. Start ARTEMIS_Unlock.exe, when program ask for .unl file, select the xxx.unl (the file select box appears behind dos box)
5. Start WST again, click <Repair IMEI> and change to your original IMEI (don't forget enable rapi button, cab files should still be installed in device)
I can confirm that it works! Few people already unlock their Artemis successfully
Remember! Changing IMEI in many country is illegal! You are doing this at your own risk.
ADMIN:- Please Make this a sticky
If you Vote "NO" Please post so we can try to help you
If it works don't forget to vote on pole and also rate please
Update To everyone wondering if you loose your unlock after flashing a new rom the answer is NO i just installed TMO WM6 stock rom and my phone is still SIM unlocked
Flashing a stock rom returns your CID To stock so you must reflash USPL to use custom roms link :- http://forum.xda-developers.com/showpost.php?p=1305931&postcount=1
maryoushek said:
Fix BSOD install WindowsXP-KB926255-x86 download here http://www.microsoft.com/downloads/...b5-1a7e-4110-9694-844706a52db7&displaylang=en
Click to expand...
Click to collapse
Thanks to all threads on xdadev and to my great searching to find these instructions

thanks, it works

Thanks very much unlocked mine successfully

I unlocked mine successfully 2 yesterday.THX

A very nice way to unlock the device. You didn't even have to be a developer to find the solution, BUT!!!
Imei-check won't like this and will ask xda-developers to delete these threads...
Like they always do when their stuff is being used...

Good Lookin' Out Bud
Thanks alot bud, been trying to get this done for ages! Worked great... ;-D

Unlock ok! P-3100 movistar, Spain.
Well done, and good job!

TryOG said:
...
Imei-check won't like this and will ask xda-developers to delete these threads...
Like they always do when their stuff is being used...
Click to expand...
Click to collapse
This is funny...IMEI-

unlock
bosta007 said:
This is funny...IMEI-
Click to expand...
Click to collapse
działa na spv m650 orange pl dzieki

Worked Very well for me
unlocked T-Mobile dutch phone

it s great

Well I tried with my SPV M650 Orange (Poland) but i'm stuck :/ when I run the Artemis_Unlock.exe on my XP i got BSOD (Blue screen of Death) sayn "Program SubSystem blabbla terminated with error code c000021a"
Any suggestions how to solve it? I'm almost done

rapelek said:
Well I tried with my SPV M650 Orange (Poland) but i'm stuck :/ when I run the Artemis_Unlock.exe on my XP i got BSOD (Blue screen of Death) sayn "Program SubSystem blabbla terminated with error code c000021a"
Any suggestions how to solve it? I'm almost done
Click to expand...
Click to collapse
Try with other PC or laptop.

Hi after press Enable Rapi I get message that all is ok but when I press Change Imei i get
Warning!
A device was detected but one (or both) of RAPI
Communications and Applications Policy isn't
enabled.
Use first button for that purpose and try again
I copied manualy RAPI and CERT but still the same. What's wrong?

Then install the two .cab files (EnableRapi and Cert_SPCS) on your device and skip the Enable RAPI step.

jacek_pp said:
Hi after press Enable Rapi I get message that all is ok but when I press Change Imei i get
Warning!
A device was detected but one (or both) of RAPI
Communications and Applications Policy isn't
enabled.
Use first button for that purpose and try again
I copied manualy RAPI and CERT but still the same. What's wrong?
Click to expand...
Click to collapse
Code:
I copied manualy RAPI and CERT but still the same. What's wrong?
Did you click on each one after copying to device to install?

doesn't work for me
sorry but doesn't work for me
i have-
Tmobile DUTCH with DUTCH windows 6.0Tmobile rom
-installed the 2 CAB files on the device -> OK
-changed IMEI -> OK
-starting ARTEMIS_Unlock.exe -> OK
-- detecting device and my phone goes in "black" mode
-- nothing on screen just blank screen
-- then the tool says : bla bla switch off firewall , reboot machine
-- everything is switched off or rebooted
-- i tried it on several FRESH installed XP machines but NOTHING
-- still getting the black screen on my phone (looks like "hanging phone")
-restart phone by removing battery , comes up OK
-changed my old IMEI back -> OK
do you have any idea ??
thnaks in advace
megasound

In Mine p3300 worked fine. Finally free!!!

megasounds said:
sorry but doesn't work for me
i have-
Tmobile DUTCH with DUTCH windows 6.0Tmobile rom
-installed the 2 CAB files on the device -> OK
-changed IMEI -> OK
-starting ARTEMIS_Unlock.exe -> OK
-- detecting device and my phone goes in "black" mode
-- nothing on screen just blank screen
-- then the tool says : bla bla switch off firewall , reboot machine
-- everything is switched off or rebooted
-- i tried it on several FRESH installed XP machines but NOTHING
-- still getting the black screen on my phone (looks like "hanging phone")
-restart phone by removing battery , comes up OK
-changed my old IMEI back -> OK
do you have any idea ??
thnaks in advace
megasound
Click to expand...
Click to collapse
when phone screen goes black, watch cmd window, does it say select unl file? yes look behind cmd window there should be a file select box with the unl file in, select it to continue the unlock process

Nothing...
no screen is comming behind the DOS box
phone "hangs" so XP says could not detect phone
doesn't work for me
again i have the latest batch from t-mobile phone ...maybe thats the issue ??
m
p.s. i still get this error (see picture) on several FRESH installed XP machines !!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
see : http://www.zshare.net/image/13803249307419dc/

Unlock code reader for HTC Touch2 / Mega

---
Noctua Tech team presents software unlock code reader which allows you to easily SIM unlock HTC Mega (HTC Touch 2 / HTC Touch2 T3333):
​
Get the phone unlock code in just 3 simple steps:
Connect the phone to your computer using the USB sync cable
Launch HTC Multi Unlocker
See the unlock code for your HTC phone appear on the screen!
All codes are 100% correct for all networks and countries, code is read from the phone itself, no wrong codes are generated.
HTC Multi Unlocker will only display the phone's SIM unlock code, allowing you to use the phone with any GSM operator's SIM card.
This software does not perform CID-unlock or Security-unlock, this is done on purpose for those who want to remove the simlock, netlock and service provider lock restrictions and still keep the phone's warranty intact (it doesn't flash a radio, or SPL... nothing is modified on the phone).
How to get the unlock software?
* People who has donated 30 EUR to XDA-Developers can request a FREE unlock by sending your phone's IMEI via PM. (You must have at least 3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
above your name.)​* Everyone else, can purchase the software here: sim-unlocker.com (instant download after payment is completed)​
---

HTC touch2 unlock problem orange
would someone please explain what does it mean ""unknown application error 3"" during unlocking process.

dejan3233 said:
would someone please explain what does it mean ""unknown application error 3"" during unlocking process.
Click to expand...
Click to collapse
same problem. money was refunded. but it is still not on my visa. seems that nobody works on 1st of january thats why i can't try another service (was adviced by http://mega.sim-unlocker.com). This service is: http://mega.unlock-now.com/ . p.s. my mega is locked by t-mobile. if you try this, post the result here please.

Arrrgh
Exactly the same problem with "www.sim-unlocker.com"
I have a T-Mobile Mega.
The IMEI number on the box is 15 digits
The IMEI number under battery is 15 digits
The IMEI number obtained from the phones Device Information is 17
I used the 15 digit one and got this error I'm also awaiting a reply from them.
The website say
"We only need the first 15 digits"

kabannister said:
Exactly the same problem with "www.sim-unlocker.com"
The website say
"We only need the first 15 digits"
Click to expand...
Click to collapse
i think it's ok! cause the last two digits is 01? i think that's mean that, cellphone is locked. normal imei is 15digits. p.s. what answer are you waiting for? mega.unlock-now.com? p.p.s. i'm still not purchased their code. problem with paymet, but if they work fine, i'll try to solve all problems faster. please post the result here.

greate service
It works. I'd soved all payment problems. got code in 5 minutes, code accepted. no more UK.T-Mobile lock.

RE: No resolution for me
Hi guys,
Well I had a lengthy round of debate with the support staff who were very responsive and helpful, however nothing worked not even the code they generated from their side, I thought it might be a fault with the phone but even after a hard reset no joy, so I'm returning it and reluctantly sticking to my HTC Hero (Not a fan of Android)
I asked for a refund, but they declined presumably because no one is entirely sure were the fault lies, however the software I originally purchased from then was broken re: "Application Error 3" so I've files a claim with PayPal.
though the process has left me even more sceptical about these unlocking services, most of you guys seem to have got yours working and the support staff were very good they did try everything.
:/

i try unlock via simlock server but get this error,any solution? HTC TOUCH 2
During the calculation of the code i get the Message: "Unknown Application Error 3"

I am getting the same error "Unknown Application Error 3" any solution i am using windows XP SP3

..
Hey, guys. i wrote the solution a couple of posts above. one service worked with the same error for me. but another sent me working code. if niether of services working, i think there is no solution yet.

No Solution returned the phone
No Refund,
No Unlock,
Totally ripped off
Returned the phone
Wouldn't trust this service, and I'll never be tempted to pay for an unlock code again.

This Sim unlocker worked for me, no issues. except that i had problem with auto sync working with vista which is is unrelated really. I was wondering tho now that ive unlocked my phone off tmobile, how do i go about getting everything working, seems i cant go on the internet as its still locked to tmobile, can make calls / messages fine on an O2 sim any help would be HUGELY appriciated

Worekd for me too
The unlock code from http://www.sim-unlocker.com/ worked for me too

did not work for me, i followed instructions carefully.Opened support ticket and now waiting for response.

Same here got that message and awaiting response from support team... Using XP SP3

Hi! I just paid for an unlock code for HTC Touch 2 from Orange Romania on mega.sim-unlocker.com. I tried using the software but I keep getting Unknown Application Error 3. The IMEI I gave them is 15 digits... I read it from the box.
Any idea why I get this error? I filed a case with them. I need to get my money back in case they don't unlock my phone. I compared the imei from the box with the one in device info on the phone: they are the same. I typed the 15 digit imei correctly.
Please post updates!
THanks!

@vladploscaru
Any news yet? Have you managed to unlock your Touch2 from Orange Ro? Did they make a full refund?
Tnx

I've unlocked my Touch2 from Orange RO using www.sim-unlocker.com software and payed 15E for that. Unnfrotunately I didn't know about QMAT at that time and the fact that it costs only 20E .

Hello,
I tried to unlock my phone on mega.sim-unlocker and I didn't succed (unknown application error 3). Luckily I got a refund. My question is where I can do it. It's locked in Orange Romania. Thank you.

DID IT
I have unlocked my phone at unlockitnow.com. It took 30 minuts to receive the code and it costed me 20 $.

[*Fixed*] WiFi Not Connecting Error {Step by Step Tutorial}

[*Fixed*] WiFi Not Connecting Error {First Comprehensive Step by Step Tutorial}
Hi folks,
This is a ray of hope for those who have been stuck with their dead WIFi radio and have been unable to fix it, even after changing the ROM/Radio Version.
Code:
Tested on: O2 xda Orbit ARTE200
hTc Artemis P3300
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Earlier Error: WiFi turns on (Shows moving Logo/Detects Available Networks) but, never able to connect, despite everything (Settings/Pass Key) been All Right. The icon Never goes Static (i.e. No Connection could be established between the available WiFi network in Range, and the WiFi Radio of the device.)
Solution follows. Read carefully, and do the following.
The ZIP Package Contains 9 files (plus TWO FOLDERS):
Code:
" MyBackUP [Folder]
Restore From Here [Folder]
backup. bat
Cert_SPCS.cab
Disable_Security.cab
EnableRapi.cab
itsutils.dll
pdocread.exe
pdocwrite.exe
restore.bat
Tutorial.txt
"
Unzip & Extract the contents of the archive to Desktop in a Folder. Name it "WiFi Fix" (without the quotes).
Tutorial:
STEP 1: Note down your IMEI on a piece of Paper/ Notepad & keep it safe (Get it by dialing *#06# on your default Phone Dialer). Remove SIM & Storage Card. Your device must be SPL Unlocked. Do it first, if not already done. Connect your PPC to your PC/Laptop. Enable ActiveSync (Windows XP) or Windows Mobile Device Center (WMDC) (Windows Vista & Windows7). Make sure to confirm the "CONNECTED" sign on your PDA & PC. And make sure to keep the WiFi radio on your PPC "TURNED OFF".
STEP 2: Once connection is established, transfer the following files to your PDA and install in Device Memory (Preferably not in the Storage Card), if not already installed. Restart/Soft Reset your PDA. Wait untill the device Restarts and the connection is re-established. (Skip this step if the above three files were pre-installed).
Code:
" Cert_SPCS.cab
Disable_Security.cab
EnableRapi.cab "
STEP 3: Run "backup.bat". A Command prompt window will appear and Two new files will be generated, namely:
Code:
" CID.bin
GSM.bin "
STEP 4: Move (Cut & Paste) these two files to the 'MyBackUp" FOLDER. Overwrite, if already existing. These are your BackUp data, save them carefully in that folder.
STEP 5: Open the FOLDER "Restore From Here". Copy two files from this folder and paste them on the main foder (called ROOT or "WiFi Fix"), namely (overwrite if already existing):
Code:
" CID.bin
GSM.bin "
The Folder now contains the following 11 files (plus TWO FOLDERS):
Code:
" MyBackUP [Folder]
Restore From Here [Folder]
backup. bat
CID.bin
Cert_SPCS.cab
Disable_Security.cab
EnableRapi.cab
GSM.bin
itsutils.dll
pdocread.exe
pdocwrite.exe
restore.bat
Tutorial.txt "
STEP 6: Run "restore.bat". A command window will appear, and it will fix the errors. Restore your own IMEI using Artemis Sim Unlock.exe /
Wizard Service Tools. Insert SIM & Memory Card.
Reboot your device, and getgoing with your WiFi, revived!
Wait a while before your device connects to Wireless Network for the first time. Next time onwards connections will take place in less than amoment.
References:
http://forum.xda-developers.com/showpost.php?p=3665608&postcount=52
http://forum.xda-developers.com/showpost.php?p=1781596&postcount=1
http://forum.xda-developers.com/showthread.php?p=5283940#post5283940
NOTE:
The IMEI of your device is gonna be CHANGED with this procedure.
Please Use Artemis Sim Unlock.exe / Wizard Service Tool to restore it.
References:
***http://forum.xda-developers.com/showpost.php?p=2305718&postcount=1
http://forum.xda-developers.com/showthread.php?t=329170
http://forum.xda-developers.com/showthread.php?t=276851
[***DISCLAIMER: The author takes no responsibility for any kind of damage what so ever, may occur to your device.***]
[***NOTE: You need to have (Windows XP)for perfect functioning with Artemis Sim Unlock.exe / Wizard Service Tool . You must have Microsoft ActiveSync Installed.***]
[***DOWNLOADS: Files & the Tutorials ***]
UploadJockey WiFi Fix.zip (494.4 KB, 0 views)
RapidShare WiFi Fix.zip (494.4 KB, 0 views)
DepositFiles WiFi Fix.zip (494.4 KB, 0 views)
MegaUpload WiFi Fix.zip (494.4 KB, 0 views)
Acknowledgments: The author acknowledges the efforts of all the members, whose posts have been put on reference. Thanks to you guys for being patient enough to read this entire topic. Looking for your reviews.

[email protected]
A thread without a reply either means its too perfect to be commented about, or its too useless to spend a word for it.
I wonder if I should consider deleting this topic.
No need to keep useless stuff going. HUH!!

It's really working !
my Mobile phone ist samsung i780. Rom: wm6.5 21887 Garman.
thank you very much ~

[Q] re-unlock problem. Please help

Installed WP7 successfully, and unlocked it as instructed.
However, didnt have the activation code. So used everything except Windows Live services.
Next day, I got the code from Microsoft and activated my WP7.
But now the phone has been locked, and I cant unlock it. Tried everything mentioned here like setting dates, turning off firewall etc, but no success.
When I run Chevron, it says can't connect with device.
Otherwise, I am able to connect to Zune and transfer media files.
I like the OS, but dont want to be limited by Marketplace only. I want to install apps. Right now, I cant even install from marketplace as I think there is a limit.

Before you quit on this amazing OS,,,been in the same boat as you for the last two days...just fixed not more than two minutes prior to this post.
-Hard reset your phone
-Do nothint with it besides seting up mail account (not live ofcourse or you migh end up attempting to unlock)
-resend certificate and install on phone
-make sure phone synced with zune
-run chevron as administrator and unlock!
-now deploy all the necessary setup tools,,,Connection setup, XMDMoDDeployer, and Touch explorer,,,finish set up process like you did before.
-use activation code and vwalaa!!!
And by the way,,what ever you do do not try the stop chevron Unlocking reg edit. It has been reported to be the cause of this annoying issue.....and besides you are better off unlocking everytime you wish to deploy an up with chevron than trying to do the initial rom setup and unlocking.,,,if you know what I mean.
Hope this helps.

First read this
a) Make sure you properly install the certificate from your email.
b) Make sure you run the xaps after install and extract then move the file correctly.
I would say a good 85% of cases where you either cant unlock or your phone relocks is because of the above to issues. There are other factors but the above imo are the two mains ones.
PS.. This is NOT the Q&A/General forum , this is the dev forum, please do not post here again.
bigtall10 said:
And by the way,,what ever you do do not try the stop chevron Unlocking reg edit. It has been reported to be the cause of this annoying issue.....and besides you are better off unlocking everytime you wish to deploy an up with chevron than trying to do the initial rom setup and unlocking.,,,if you know what I mean.
Click to expand...
Click to collapse
Sorry but thats just bullsh*t.

TheATHEiST said:
Sorry but thats just bullsh*t.
Click to expand...
Click to collapse
Ummm, not BS, something is causing a re-lock, but setting the PortalUrlProd and PortalUrlInt to invalid values makes ChevronWP7 fail no matter what... Read this thread: For those who can't unlock anymore using ChevronWP7, here's why!
DanielNTX said:
I wrote this inside of another thread, but decided to make a new thread because others may not find it or read it. For those who have tried everything, this is the reason why you can't unlock the phone unless you do a full reset:
The majority of the failures to unlock your phone again is because you used a registry script that changed the HD2 to identify it as an HD7 and may have included registry entries that set PortalUrlProd and PortalUrlInt to 127.0.0.1 or a Null value and somehow your phone became relocked. Once it's set this way, no matter what you do to unlock the phone it won't work because the proper server to query is "developerservices.windowsphone.com" is not defined on the phone. ChevronWP7 works by hijacking and spoofing the address of developerservices.windowsphone.com to be your local computer and then responds appropriately over port HTTPS (443) to the phone.
From this post, Microsoft/ChevronWP7 responds with this:
Code:
<DaysLeft>365</DaysLeft>
<AppsAllowed>10</a:AppsAllowed>
If you set it to 127.0.0.1 in the registry this references your phone when it tries to unlock. The phone itself is not running a spoofed HTTPS server so it will never work. Setting it to null means it doesn't no where to go either. If your phone is working in Zune and you hit the end button on the phone, you will notice ChevronWP7 will report that the phone is pin-locked, this means ChevronWP7 knows about the phone, but the "uh oh - Please make sure it's connected using USB, Please start the Zune application" message it generates is kind of ambiguous and is not the actual error we are seeing here.
The original values are these:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg]
"PortalUrlProd"="https://developerservices.windowsphone.com/Services/WindowsPhoneRegistration.svc/01/2010"
PortalUrlInt"="https://developerservices.windowsphone-int.com/Services/WindowsPhoneRegistration.svc/01/2010"
and the corresponding certificate is this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That's how the phone can trust the HTTPS connection because you imported the certificate.
Now if you change the URL to something else, you will need a corresponding certificate. You can make one with makecert.exe or makessl.exe form the various resource/development toolkits out there on the Microsoft website.
In my example, I'm going to use a site that doesn't exist "developerservices.unlock.me". You should change the PortalUrlProd and PortalUrlInt on the phone as follows:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg]
"PortalUrlProd"="https://developerservices.unlock.me/Services/WindowsPhoneRegistration.svc/01/2010"
"PortalUrlInt"="https:/developerservices.unlock.me/Services/WindowsPhoneRegistration.svc/01/2010"
Now in your hosts. file in \windows\system32\drivers\etc folder, you should set up an entry for developerservices.unlock.me with your computer's own IP address.
Once you do you need to install a new certificate on the phone for whatever host in the URL you made and you will be able to use ChevronWP7 to unlock incase it ever locks you out again.
To simplify the making a self-signed certificate portion, I've created a cert for "developerservices.unlock.me" with the validity date of 1000 days. It's included in this post. Hope this helps you all with maintaining an unlocked Windows Phone 7 and understanding why ChevronWP7 won't unlock anymore.
Click to expand...
Click to collapse

i am in india what radio I need to use in india bsnl network

please help me what radio for India bsnl network for 3g

[XAP] ROM Rebuilder, interop unlock + all capabilities

Hi Everyone !! :highfive:
I want to show everyone a new tool which can modify ROM.
This application can give interop unlock, all capabilities and many more other additives
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to start? instructions are listed below
1. Download ROMRebuilder.7z, extract archive and copy ROMRebuilder.xap and Data to SD card.
2. Install CustomWPSystem v0.6 in phone memory .
3. Change year in phone to 2110 and run Extras + info. When you see an error message, tap uninstall button and set actual date.
4. Change installing applications to SD card.
5. Run CustomWPSystem , select Extra e info and tap Download from store.
6. If the application will be installed, go back to CustomWPSystem, tap SD Card permissions and select SD card. Now button should change to green color.
7. Tap Select the XAP , select ROMRebuilder.xap, and tap Apply XAP.
8. When everything will be done successfully, app Extras+info, will be converted to ROM Rebuilder (although the name remains Extras+info).
When you have everything installed and ROM Rebuilder waiting for the commands, you need to do a few other important things .
9. Copy Data.bin to Data folder on SD card.
I posted several files for some phones here.
If you can not find Data.bin suitable for your phone model, you can create it yourself.
1. Run ROM Rebuilder and tap Backup button. OEMSettings.reg file will be copied to Backup folder on SD card.
2. File OEMSettings.reg is compressed using gzip. You can open it using e.g 7-zip. Inside archive is located one file. Click on it with the right mouse button and select edit.
3. At the bottom add whole content from additional_entries.reg and save the changes.
4. Change name OEMSettings.reg to Data.bin and copy this file to Data folder on SD card.
Uhh ... Finally, you can press Rebuild button in ROM Builder. Whole process will take one little moment. After receiving Success message you need make Hard Reset.
In this video you can see what can do phone after adding capabilities + interop unlock
https://www.youtube.com/watch?v=khbX3oEs9aY
If you appreciate what I did for you, Press the button below, It means a lot to me
Donations :
8 $
13 $
27 $
Thanks ! :victory:

@-W_O_L_F-
---------- Post added at 08:37 PM ---------- Previous post was at 08:35 PM ----------
@GoodDayToDie

WojtasXda said:
Hi Everyone !! :highfive:
I want to show my new achievement. I was able to unlock all capabilities and add interop unlock to my lumia 1520 (RM-940) . Additional I deleted all entries in registry from AT&T.
Below is a video to prove that this information is not fake ( Please turn on subtitles)
https://www.youtube.com/watch?v=iqTE1bYTtOU
This film showed only the most important things.
Tutorial will be posted soon...
Click to expand...
Click to collapse
please make the tutorial fast

If you say how did you do that I'lldo the same on L920

Works without SD card?

Not for devices without SD unfortunately

Great work.

Interop Unlock is useless on Lumias, but if info about CAP Unlock is true...
Finally, Lumia users can install my AppData Manager and Lockscreen

WojtasXda said:
Hi Everyone !! :highfive:
I want to show my new achievement. I was able to unlock all capabilities and add interop unlock to my lumia 1520 (RM-940) . Additional I deleted all entries in registry from AT&T.
Below is a video to prove that this information is not fake ( Please turn on subtitles)
https://www.youtube.com/watch?v=iqTE1bYTtOU
This film showed only the most important things.
Tutorial will be posted soon...
Click to expand...
Click to collapse
Will it work with windows 10

souma_rox said:
Will it work with windows 10
Click to expand...
Click to collapse
I'm afraid not

So when is the tutorial coming out???

Congrats !!!!!
Many Best wishes to you

Finally!
Oh yes!!! Finally!!! Congrats for that!
Sent from Ponyville

@WojtasXda
Unlock all capabilities ??????????????
But only for Lumia with SD or for all Windows Phone with SD ??
(Thanks for your hard work)

Lumia Resource Hacker Source Code
Hi,
I've attached Source Code of my App to this Post.
I did not written any special code for It because of security access level.
Even I'm not able access "READ ONLY" stuff using official API.

djamol said:
Hi,
I've attached Source Code of my App to this Post.
I did not written any special code for It because of security access level.
Even I'm not able access "READ ONLY" stuff using official API.
Click to expand...
Click to collapse
Wow, having access to an registry editor potentially on all current Lumias opens open space for developers significantly. This could genuinely help improve advancement of the platform.

@WojtasXda
You need to post the tutorial soon, or else this thread will be locked. Placeholders are not allowed, as per XDA rules

Tutorial please! I guess a lot of us have waited for a long time and we all want to know what all we can do with the Windows Phone on Lumia devices!
Is it something related to this ? : http://forum.xda-developers.com/windows-phone-8/general/mod-adblock-tutorial-lumia-t3095171

Man I think there will be no tutorial and he is just bluffing

yea i guess so, what a disappointment