Related
Ok so I originally rooted my phone and put Fresh ROM on it, there was a little hiccup in the install but I didnt really think much of it, recently when I tried to flash a new ROM (I tried multiple ones just to be sure it wasn't the rom) but whenever I try to flash the ROM (using clockworkmod from recovery mode) it will say the install was successful but when I reboot it will do one of two things: stay on the "HTC EVO 4G" startup screen or continue to turn off and on like its in a bootloop. Does anyone have any ideas whats happening and what I should do? I have tried clearing/wiping all of the options that are available in clockworkmod and even tried using a new SD Card but it still does the same thing
guribe94 said:
Ok so I originally rooted my phone and put Fresh ROM on it, there was a little hiccup in the install but I didnt really think much of it, recently when I tried to flash a new ROM (I tried multiple ones just to be sure it wasn't the rom) but whenever I try to flash the ROM (using clockworkmod from recovery mode) it will say the install was successful but when I reboot it will do one of two things: stay on the "HTC EVO 4G" startup screen or continue to turn off and on like its in a bootloop. Does anyone have any ideas whats happening and what I should do? I have tried clearing/wiping all of the options that are available in clockworkmod and even tried using a new SD Card but it still does the same thing
Click to expand...
Click to collapse
Hi there. First off, I need a little more info, like which rom you are trying to flash right now. Also, what radio's and pri do you currently have?(menu>settings>about phone>software info, radio is baseband) If you have the older radio and PRI, (same as the ones in my sig), and you are flashing to a 3.70 software ROM, which most likely you are, you will need to either flash a custom kernel, while in recovery, just after flashing the rom (before you boot). Or upgrade your radios. If you have already updated your radios, and you're still experiencing this, I would first and foremost, switch to Amon Ra recovery (which version of clockwork are you on, btw?). The easiest way to switch to Amon Ra, is to get Rom Manager from the market. Use rom manager to "flash clockworkmod reocovery" (even though you already have clockwork, do this) Then scroll down, and you'll see "flash alternate recovery". Select that, and let it flash Amon Ra for you. Shut the phone down, and manually boot into recovery (vol down+power). Use amon's recovery to do a full wipe, (data, cache, davlik cache x3) Then flash calkulin's format all.zip. That will ensure a good wipe. Then follow my above mentioned instructions, and try again. That should work. If it doesn't, report what the exact errors are here. Good luck
Maybe this is a stupid question, but are you able to nand restore to a rom where your phone will actually boot up?
Calkulin format all zip is your best bet. It will wipe your system data, data, cache and dalvik cache. A full purge.
Just have a good zip like chris sprint lovers rom. And better yet a PC36100.zip from chris all in one update thread.
Sent by my eVo running Vin255764 Plutonium...yup
Here's a few suggestion:
Change your radio version - Some kernels don't work right with the newest, and some don't work right with older ones.
Change your kernel - This is always the best suggestion IMO. For a sense based ROM run one of netarchy's latest kernels. Often a bootloop is because of a kernel/radio issue.
Plus with netarchy and setcpu you'll get some wicked battery life.
Try wiping everything, and then try again. Also try flashing a different rom
having issues flashing myn rom
have 3.7 evo rooted unrevoked3/kernel 15
when i try to flash from clockwork mod it just blinks right quick but doesn't do anything.. all the things are up to date .. can anyone help?
when i flashed amon ra and flashed rom.. it says E: can't find update script..
i dl rom manager and did the alt recovery to amon ra. it still won't flash the rom.. but now i have another problem.. my sd card clockwork back up is not there... and now i can't restore to previous state. i can't get to the regular phone interface. what can i do to restore?
I had an earlier version of cyanogenmod installed, I went into rom manager and pressed update (or something like that). It did the whole installation thing but now it's just hanging at the cyanogenmod splash screen.
What do?
silverback88 said:
I had an earlier version of cyanogenmod installed, I went into rom manager and pressed update (or something like that). It did the whole installation thing but now it's just hanging at the cyanogenmod splash screen.
What do?
Click to expand...
Click to collapse
Have you tried to boot into recovery ? (turning it on by pressing the power button and the - volume button)
Did you backup? Always, always backup.
If not try downloading the ROM and flashing that, don't wipe just yet, if that fails you will probably need to wipe and flash again.
ok so i did a recovery of the backup i did just before trying to install cyanogen 7
FFUUUUU.... now everything is pretty much lost! even the old cyanogen is gone. What can I do?!
Was your old backup from a pre 2.3 ROM?
^^ how can i tell?
sorry for being a noob
What was the ROM you backed up before flashing CM7?
the backup i did just before trying to install cyanogen 7
Click to expand...
Click to collapse
it was cyanogenmod 6.1.3
Ok, your problem now is that the file system changed from 2.2 (Froyo) to 2.3 (Gingerbread) and you will need to flash a new version of ClockworkMod Recovery to restore that backup.
Do you have ENG S-OFF? You will be able to flash it via fastboot, if not you will have to start again from CM7 and downgrade ClockworkMod Recovery from there, then restore your backup.
I flashed the latest ClockworkMod Recovery (3.0.0.6) - I think before I tried to install CM7.
Restoring the backup means almost everything is gone, apps, settings, etc (but not everything). Did I **** it up? Will I have to redo everything?
If I have to do that anyway I might as well use CM7, but installing that means the splash screen hangs (I had the same problem with CM6, I dont remember how I fixed it)
Your right, to flash CM7 you needed CWM 3.x.x.x
Restoring that backup 6.1.3 will take you back to pre-CM7 so yes everything will be gone.
Have you tried just flashing CM7 again?
ok, trying to install cm7 again...
Don't wipe just yet, if it still hangs after flashing again you will then have to wipe.
****, it's hanging at the CM7 splash screen again
Ok, you will need to perform a wipe.
In CWM you have "mounts & storage"
Format boot & system, then flash CM7 again, (btw which CM7 ROM are you flashing?)
I did that (through the recovery or w/e) and then it was hanging at the HTC logo....
I had to restore the backup once again and am back where I was before
What can I do?
btw it's CM 7.0.0-RC2
Ok sounds like a full wipe is needed.
Again in CWM "mounts and storage" format everything except scdard, then back out and go into "advanced" and wipe dalvik cache.
Flash CM7 again, it should work now.
can i flash CM7 through the recovery console? because if i wipe everything then obviously i cant boot back into it?
Don't worry you can't wipe recovery from within recovery, so after a full wipe it will still be available.
before I do that, how exactly do i install CM 7 from recovery console? I think it was downloaded to my SD card but I dont see a straight forward option in the recovery console
Hey I was running my stock sense rom with the x99 kernel. All was running well. I then looked in my rom manger and tried to install the newest sparks co. Rom. I wiped data/cache and it "restoring system". So I installed this cynogyn zip from my sd. That is the only way I can use my phone. Any help i would be greatful
Go back to your stock ROM via recovery. Wipe and reflash. Don't use ROM manager to flash ROM's.
Brando
Hey Guys
I'm rooted and running RA recovery,
I was using Mik3D ROM for a while and
had it set to my liking, of course because
I have flashers OCD I decided to try different Roms
But I made a nand backup, after trying a few Roms that I did not like
I was able flash my nand backup back to my phone and all was good.
This last time I tried a Synergy RLS1, ( not the god mode )
and now I get errors when I do a data wipe, and dalvik cache wipe.
and when I try and do a nand backup of my Mik3d rom, I get an error and it stops, at about 75%
any ideas
these are some of the errors going by memory
error dev/block/mmcblkop2 and mmcblko
error mounting sd-ext/dalvik-cache
I tried to take my nand backup and copy it to a new sd card
in case my sd card became corrupt, it does flash all the way,
but when the phone starts I have just a blank wallpaper screen
with out the lock ring, and no way to use anything
Thanks guys
I've been having trouble with recoveries too. For some reason I can restore with clockwork but not amon-ra, and flash with amon-ra and not clockwork(clockwork doesn't seem to wipe as well as amon-ra). I tried teamwins recovery and couldn't do a restore on that either. I'm not sure what's going on.
We're comin from a pure power source.
Yea the weird thing is I was able to do about 3 nand restores with RA recovery, but after installing Synergy, I was no longer able 2, all I get is errors.
I just installed clockwork recovery to see if I can restore my nand.
mmm....
I never had that issue and I flashed a several roms, but thanks for addressing it, that gives me alot to consider.
Try reinstalling latest anon ra recovery.
Sent from my PC36100 using XDA App
OK guys
I got the old nandroid backups to finally work.
I used VR superwipe, and then did a sd-ext repair via recovery
and its all good.
hope this helps others, I think the sd-ext is getting corrupt.
if this helps hit the thanks button, I don't seem to have any, feeling left out lol!
in teamwin official website i couldn't find twrp recovery support for motorola bravo, however motorola defy was in the list to get twrp recovery.
does TWRP for defy work on bravo? or we need a different for bravo? i love that recovery ...can some body help me install that on my bravo???
hiandro said:
in teamwin official website i couldn't find twrp recovery support for motorola bravo, however motorola defy was in the list to get twrp recovery.
does TWRP for defy work on bravo? or we need a different for bravo? i love that recovery ...can some body help me install that on my bravo???
Click to expand...
Click to collapse
The Defy TWRP works on the Bravo, but its only up to version 2.1 and can't install large Aroma roms (WR, Pikachu, etc). Your better off reading the thread over at Defy Development. Its neat and works, but our custom CWM 5 is the best for us in terms of reliability and stability.
skeevy420 said:
The Defy TWRP works on the Bravo, but its only up to version 2.1 and can't install large Aroma roms (WR, Pikachu, etc). Your better off reading the thread over at Defy Development. Its neat and works, but our custom CWM 5 is the best for us in terms of reliability and stability.
Click to expand...
Click to collapse
can u give me link to download latest CWM please.
hiandro said:
can u give me link to download latest CWM please.
Click to expand...
Click to collapse
Its installed be default with CM10 or PA. The newer the rom, the newer the recovery.
You can copy the zip/system/bootmenu/.... to other roms to get the touch ui in the bootmenu, just don't overwrite your current roms init scripts....and use a PRE 2nd Kernel zip when porting the bootmenu to non custom kernel roms. This isn't something I'd advise doing cause if you don't know what your fully doing you can easily put yourself in a position to flash the sbf. I sbf'd 3 times adding the JB Touch bootmenu to CM7.
skeevy420 said:
Its installed be default with CM10 or PA. The newer the rom, the newer the recovery.
You can copy the zip/system/bootmenu/.... to other roms to get the touch ui in the bootmenu, just don't overwrite your current roms init scripts....and use a PRE 2nd Kernel zip when porting the bootmenu to non custom kernel roms. This isn't something I'd advise doing cause if you don't know what your fully doing you can easily put yourself in a position to flash the sbf. I sbf'd 3 times adding the JB Touch bootmenu to CM7.
Click to expand...
Click to collapse
I installed cm10 then after I went to stable recovery and I wipe data/factory reset and then wipe cache and again wipe dalvik cache,and then I went to install zip from SD card and then choose mokee and flashed the zip.and when I reboot the phone it got stuck at Motorola red logo. again i boot into recovery (it was different, which mokee installed maybe)and when i wipe data and cache it said something like this:can't mount E/cache/recovery/log .and then i went to backup and restore and restored my cm10 backup and it only restored system(no data) why did this happen did I did something wrong?? or is there problem in recovery?? please tell me about this.
hiandro said:
I installed cm10 then after I went to stable recovery and I wipe data/factory reset and then wipe cache and again wipe dalvik cache,and then I went to install zip from SD card and then choose mokee and flashed the zip.and when I reboot the phone it got stuck at Motorola red logo. again i boot into recovery (it was different, which mokee installed maybe)and when i wipe data and cache it said something like this:can't mount E/cache/recovery/log .and then i went to backup and restore and restored my cm10 backup and it only restored system(no data) why did this happen did I did something wrong?? or is there problem in recovery?? please tell me about this.
Click to expand...
Click to collapse
I have a couple of ideas, but I'd be guessing with all of them. Probably just an error from CM10 using a newer recovery than Mokee. Since CM10's /system was restored, so was its bootmenu\recovery -- try doing a full restore now that you're using the same recovery that backed it up .
Crap like this is why we need an unlocked bootloader, or even just a place to hide a custom recovery -- with every rom you flash, your recovery changes and bad things can\have happened. While its nowhere as bad as it once was, problems like yours still occur from time to time. Its the same reason that there's so many posts with people having problems from using BandroidX Recovery -- its a very old CWM based recovery that uses different formats than whats used now (can't even install newer roms with it). Old and new don't usually play nicely with us .
skeevy420 said:
I have a couple of ideas, but I'd be guessing with all of them. Probably just an error from CM10 using a newer recovery than Mokee. Since CM10's /system was restored, so was its bootmenu\recovery -- try doing a full restore now that you're using the same recovery that backed it up .
Crap like this is why we need an unlocked bootloader, or even just a place to hide a custom recovery -- with every rom you flash, your recovery changes and bad things can\have happened. While its nowhere as bad as it once was, problems like yours still occur from time to time. Its the same reason that there's so many posts with people having problems from using BandroidX Recovery -- its a very old CWM based recovery that uses different formats than whats used now (can't even install newer roms with it). Old and new don't usually play nicely with us .
Click to expand...
Click to collapse
Yeah, i tried to restore backup using cm10 recovery and although it said cant restore .android.secure something like that(iam not quite sure) it restored system as well as data.
The thing is i like mokee os .its speed, clean and clear... ecetra but it is not jelly bean.can't we have a cm10 tweaked and modified for bravo.of course I love your PA jelly bean there are lots of tablet tweaks can you also add some other functions like in pimp my rom.
And thanks man for answering my queries