ROM flashing problems with my EVO :( - EVO 4G General

Ok so I originally rooted my phone and put Fresh ROM on it, there was a little hiccup in the install but I didnt really think much of it, recently when I tried to flash a new ROM (I tried multiple ones just to be sure it wasn't the rom) but whenever I try to flash the ROM (using clockworkmod from recovery mode) it will say the install was successful but when I reboot it will do one of two things: stay on the "HTC EVO 4G" startup screen or continue to turn off and on like its in a bootloop. Does anyone have any ideas whats happening and what I should do? I have tried clearing/wiping all of the options that are available in clockworkmod and even tried using a new SD Card but it still does the same thing

guribe94 said:
Ok so I originally rooted my phone and put Fresh ROM on it, there was a little hiccup in the install but I didnt really think much of it, recently when I tried to flash a new ROM (I tried multiple ones just to be sure it wasn't the rom) but whenever I try to flash the ROM (using clockworkmod from recovery mode) it will say the install was successful but when I reboot it will do one of two things: stay on the "HTC EVO 4G" startup screen or continue to turn off and on like its in a bootloop. Does anyone have any ideas whats happening and what I should do? I have tried clearing/wiping all of the options that are available in clockworkmod and even tried using a new SD Card but it still does the same thing
Click to expand...
Click to collapse
Hi there. First off, I need a little more info, like which rom you are trying to flash right now. Also, what radio's and pri do you currently have?(menu>settings>about phone>software info, radio is baseband) If you have the older radio and PRI, (same as the ones in my sig), and you are flashing to a 3.70 software ROM, which most likely you are, you will need to either flash a custom kernel, while in recovery, just after flashing the rom (before you boot). Or upgrade your radios. If you have already updated your radios, and you're still experiencing this, I would first and foremost, switch to Amon Ra recovery (which version of clockwork are you on, btw?). The easiest way to switch to Amon Ra, is to get Rom Manager from the market. Use rom manager to "flash clockworkmod reocovery" (even though you already have clockwork, do this) Then scroll down, and you'll see "flash alternate recovery". Select that, and let it flash Amon Ra for you. Shut the phone down, and manually boot into recovery (vol down+power). Use amon's recovery to do a full wipe, (data, cache, davlik cache x3) Then flash calkulin's format all.zip. That will ensure a good wipe. Then follow my above mentioned instructions, and try again. That should work. If it doesn't, report what the exact errors are here. Good luck

Maybe this is a stupid question, but are you able to nand restore to a rom where your phone will actually boot up?

Calkulin format all zip is your best bet. It will wipe your system data, data, cache and dalvik cache. A full purge.
Just have a good zip like chris sprint lovers rom. And better yet a PC36100.zip from chris all in one update thread.
Sent by my eVo running Vin255764 Plutonium...yup

Here's a few suggestion:
Change your radio version - Some kernels don't work right with the newest, and some don't work right with older ones.
Change your kernel - This is always the best suggestion IMO. For a sense based ROM run one of netarchy's latest kernels. Often a bootloop is because of a kernel/radio issue.
Plus with netarchy and setcpu you'll get some wicked battery life.

Try wiping everything, and then try again. Also try flashing a different rom

having issues flashing myn rom
have 3.7 evo rooted unrevoked3/kernel 15
when i try to flash from clockwork mod it just blinks right quick but doesn't do anything.. all the things are up to date .. can anyone help?
when i flashed amon ra and flashed rom.. it says E: can't find update script..

i dl rom manager and did the alt recovery to amon ra. it still won't flash the rom.. but now i have another problem.. my sd card clockwork back up is not there... and now i can't restore to previous state. i can't get to the regular phone interface. what can i do to restore?

Related

Problem flashing back to Clockwork Recovery

I think something in my recovery is corrupted as I cant get back to ClockworkMod recovery after switching to RA in ROM Manager. I normally use Clockwork for my backup and restores. But before switching to the new rom, I flashed into RA to make sure I did a good wipe before installing the new rom (like I always do). However, it took unusually long to flash RA in ROM Manager but it successfully finished. I was able to reboot into recovery, do my wipes, and and flash the new rom. Now after getting the phone set up with the new rom, I cant get back to Clockwork in ROM Manager. Im getting an error after selecting HTC Evo CMDA phone, "an error occurred while flashing your recovery" and Im stuck with RA recovery. Im guessing I need to reinstall recovery? Whats the easiest way to do this?
ROM Manager 2.5.0.7
Warm RLS4
Clear download cache in rom manager and try again.
Sent from the void...
didnt work. it sat there for a minute and then gave the same error. any other ideas?
Fixed. After about an hour of seaching, I found a thread suggesting to try to connect to WIFI and flash Clockwork again. That worked. It granted SU permissions, and flashed Clockwork.
For the hell of it, I tried to break it again.
Turned off WIFI, tried to flash RA, and it was very slow again. Took about 2 minutes to flash RA but it completed. Tried to flash Clockwork, and it went through ok now without being on WIFI.
I did it a few more times and seem to get inconsistent results. When it doesnt work right, it seems to be taking very long to get SU permissions granted for both recoveries. What is causing that?

[Q] myTouch 4G Recovery Issues! Please Help!

I checked through 100s of post tonight and could not find the answer to this and am in need of some help. I attempted to install a Cyanogen Nightly tonight through Rom Manager with no prior knowlege of the issues with CW 2.5 vs. CW 3.0. Stupid I know.
So natuaraly, when the download finished and Rom Manager tried to install, my MT4G just hung at the white boot screen. Through previous posts, the directions were simple to reflash the previous CW Recovery through Fastboot and reflash the Rom.
Well thats where the problem is.... When I attempt to flash ANY Rom earlier than 3.0.0.5, it will say OKAY in CMD, however the phone will never boot into the Recovery. I even tried fastboot erase recovery then reinstalled and still nothing.
So i decided to go a different root and reinstalled 3.0.0.5 to see if there was any work around through there. After i install 3.0 through Fastboot, I am able to go into Recovery, however when I select ANY option no matter what, the hat and the gear icon stay in the background and nothing happens.
I am very confused and lost and am hoping someone here will have had the same issue and can help me get my phone back in order.
Thanks in advance guys!
highrolla1866 said:
I checked through 100s of post tonight and could not find the answer to this and am in need of some help. I attempted to install a Cyanogen Nightly tonight through Rom Manager with no prior knowlege of the issues with CW 2.5 vs. CW 3.0. Stupid I know.
So natuaraly, when the download finished and Rom Manager tried to install, my MT4G just hung at the white boot screen. Through previous posts, the directions were simple to reflash the previous CW Recovery through Fastboot and reflash the Rom.
Well thats where the problem is.... When I attempt to flash ANY Rom earlier than 3.0.0.5, it will say OKAY in CMD, however the phone will never boot into the Recovery. I even tried fastboot erase recovery then reinstalled and still nothing.
So i decided to go a different root and reinstalled 3.0.0.5 to see if there was any work around through there. After i install 3.0 through Fastboot, I am able to go into Recovery, however when I select ANY option no matter what, the hat and the gear icon stay in the background and nothing happens.
I am very confused and lost and am hoping someone here will have had the same issue and can help me get my phone back in order.
Thanks in advance guys!
Click to expand...
Click to collapse
I havent had that issue exactly, but I might be able to help wlk you through getting this fixed. Ive had problems more than once myself on recovery, and helped a couple others solve other issues on here. If you want, add me on google talk (same username as on xda), and Ill walk you through it. Might have to wait till the morning, though, as Im probably gonna head to bed soon.
Fastboot 2.5 recovery and reflash froyo rom. If you decide to install CM7 again - read,search and make sure that you understand what you're doing. It has been stated at least few dozen times that Rom Manager is useless with gingerbread until Koush updates it.
Same Issue??
I believe my issue sounds similar.
I tried to go from Iced Glacier up to CM7. When I did I attempted to use the Clockwork Recovery 2.5 and of course it didn't work. Then I tried to upgrade it to 3.0.0.5. Now when I try to reboot into Clockwork recovery the phone just stays on the MyTouch 4G splash screen. The only way to get around it is use the Power/Volume down button and click on FASTBOOT and then select REBOOT.
The phone then boots in Iced Glacier. I have redownloaded ROM Manager and attempted to FLASH CLOCKWORKMOD RECOVERY. But it still won't load into recovery.
Essentially I need some step by step help to get back to clockworkmod recovery. I'm not too worried if I need to wipe everything. Just looking for the ability to restore again.
Alternatively I'm interested in upgrading to CM7 but not sure how I could do that without recovery working. I would also ask if you can give step by step instructions it would be much appreciated as I'm still pretty new to this.
Thanks!
I also have the similar problem. I have installed the Clockworkmod 3.0.0.5 and have rooted my phone before i was trying to install the gingerbread version. I made a recovery backup. i tried to restore the phone with that backup image but it still hung up with that "t-mobile mytouch " white splash screen.
What should i do now ? i have no idea how to bring my phone back to life :/
fosunite said:
I also have the similar problem. I have installed the Clockworkmod 3.0.0.5 and have rooted my phone before i was trying to install the gingerbread version. I made a recovery backup. i tried to restore the phone with that backup image but it still hung up with that "t-mobile mytouch " white splash screen.
What should i do now ? i have no idea how to bring my phone back to life :/
Click to expand...
Click to collapse
Jmg90300zx said:
I believe my issue sounds similar.
I tried to go from Iced Glacier up to CM7. When I did I attempted to use the Clockwork Recovery 2.5 and of course it didn't work. Then I tried to upgrade it to 3.0.0.5. Now when I try to reboot into Clockwork recovery the phone just stays on the MyTouch 4G splash screen. The only way to get around it is use the Power/Volume down button and click on FASTBOOT and then select REBOOT.
The phone then boots in Iced Glacier. I have redownloaded ROM Manager and attempted to FLASH CLOCKWORKMOD RECOVERY. But it still won't load into recovery.
Essentially I need some step by step help to get back to clockworkmod recovery. I'm not too worried if I need to wipe everything. Just looking for the ability to restore again.
Alternatively I'm interested in upgrading to CM7 but not sure how I could do that without recovery working. I would also ask if you can give step by step instructions it would be much appreciated as I'm still pretty new to this.
Thanks!
Click to expand...
Click to collapse
Sounds like both of you should of never of done this. This has been discussed a few times, and the end result is always the same.....
Download the correct Recovery image (which can be found in the Development section) and install it to your phone by using the ADB commands, in the fastboot mode. you can find a quick and painless way to set those up in my signature. Once you have installed the recovery image you can boot into hBoot and select recovery. from there you can flash CM7 and the gapps. Once you have done all that download the official clockwork ROM manager from the market and flash his current recovery image.

brick Nexus S

Hello. i am new to the android family
i have a nexus s GT-9020T
i have rooted my phone but without setting the clockworkmod reovery.
today i was playing with the rom manager and downloaded one of the rom from the list. after installation i was unable to start the phone only seeing the google logo with the unlock logo.
i went back into the recovery by typing flash recovery recovery.img etc.
run a restore and restart the phone but still not work
my nexus s is 2.3.4 by the way.
please assist
What "restore" did you run?
Go here: http://forum.xda-developers.com/showthread.php?t=1056062
And download the full rom:
Model: i9020T
Full Rom: GRJ22, KD1
That'll revert your Nexus S to the latest completely stock 2.3.4
Then you can flash recovery again and go back to clockwork mod and go flash another rom or whatever.
Remember when you're flashing a new rom you need to wipe data and cache and dalvik cache.
i run an restore from the backup that i made before installing the new rom using clockwork mod recovery, its part of the option when installing the rom using the rom manager * click box - backup * etc something like that
sheunghko said:
i run an restore from the backup that i made before installing the new rom using clockwork mod recovery, its part of the option when installing the rom using the rom manager * click box - backup * etc something like that
Click to expand...
Click to collapse
Next time don't use Rom Manager to make backups or flash roms. It's stupid and can get you issues like you're having.
Anyways, try wiping data and cache then restoring the backup, do it in Clockwork Recovery.
Let it boot, first boot always takes a while, 5-10 minutes. If you see the boot animation freeze, stop and restart, then yeah it's screwed up, otherwise, just let it is.
If still not working from your backup, do what I said in previous reply, just restore to stock 2.3.4 then re flash clockwork mod and start over with the rom you want to flash.
thank your nxt. i have found the real problem. it was not my backup problem or the rom that u provided. it was the version of my clockwork mod recovery. i was using an 2.x.x.x to restore the phone which is why it doesn't work. everything work fine now after i flashed with an 3.x.x.x and restore the phone. one question thou, where can i always find the newest clockwork mod recovery release ? thank you very much
sheunghko said:
thank your nxt. i have found the real problem. it was not my backup problem or the rom that u provided. it was the version of my clockwork mod recovery. i was using an 2.x.x.x to restore the phone which is why it doesn't work. everything work fine now after i flashed with an 3.x.x.x and restore the phone. one question thou, where can i always find the newest clockwork mod recovery release ? thank you very much
Click to expand...
Click to collapse
http://mirrorbrain.cyanogenmod.com/cm/recoveries/
Or just use ROM Manager to get the latest.
That's the only thing I use ROM Manager for... getting the latest Recovery.
thanks again nxt. if you don't mind really ...i have one more question. i know the phone intend to uninstall clockwork mod recovery once its restarted. i know there is command type into the cmd to avoid the phone uninstall the clockworkmod reovery and make it permanent in another word. I didn't run those command when i root my phone because i don't know if its good to make it permanent like.... hmmm like if there will be a 2.3.5 coming next month..just saying ok... with a permanent unofficial recovery will cause a problem?
sheunghko said:
thanks again nxt. if you don't mind really ...i have one more question. i know the phone intend to uninstall clockwork mod recovery once its restarted. i know there is command type into the cmd to avoid the phone uninstall the clockworkmod reovery and make it permanent in another word. I didn't run those command when i root my phone because i don't know if its good to make it permanent like.... hmmm like if there will be a 2.3.5 coming next month..just saying ok... with a permanent unofficial recovery will cause a problem?
Click to expand...
Click to collapse
Are you running custom ROM? If you are, it's already made to not revert back to stock recovery. If you leave it stock recovery you'll get notifications for firmware updates by Google, but remember that applying those to a rooted phone might screw things up too.
the blue one is stock recovery right?
sheunghko said:
the blue one is stock recovery right?
Click to expand...
Click to collapse
Don't remember. It should only have like 3-4 options.
thanks again nxt. no i am not running an custom rom. i mean not yet. i planed to try one from the rom manager download section then my phone couldn't start after installation and now i have restored my phone from my backup using the clockwork mod recovery 3.x.x.x.

Links

Can somebody update this list with the actual links to what you saying to download? I would like to give this a try, but not sure where all these links are.
Assuming you are comfortable with the issues and concepts associated with rooting (terms like bootloader, recovery and ROM's), I suggest you do the following:
1. Go to unrevoked.com and root the Incredible; also run unrevoked-forever to secure S-OFF status.
2. Go to dougpiston.com and get the latest CWM for the phone; 3.0.0.7 if it's Amoled display (Hardware version 2) or SLCD (Hardware version 3). (BTW, note that this ROM erroneously reports Amoled Incredibles as the wrong hardware version). Flash that from hboot. Remove the file from the root directory of the SD card afterwards.
3. Download the 7.07 leaked radio; download the ROM; download the updated OTA kernel from a few days ago.
4. Flash away (I would do ROM, kernel, then radio. Remember to flash dalvik/cache before flashing a kernel; and remember that the radio is flashed in hboot.)
jamala00 said:
Can somebody update this list with the actual links to what you saying to download? I would like to give this a try, but not sure where all these links are.
Assuming you are comfortable with the issues and concepts associated with rooting (terms like bootloader, recovery and ROM's), I suggest you do the following:
1. Go to unrevoked.com and root the Incredible; also run unrevoked-forever to secure S-OFF status. unrevoked.com
2. Go to dougpiston.com and get the latest CWM for the phone; 3.0.0.7 if it's Amoled display (Hardware version 2) or SLCD (Hardware version 3). (BTW, note that this ROM erroneously reports Amoled Incredibles as the wrong hardware version). Flash that from hboot. Remove the file from the root directory of the SD card afterwards. I just ran the Unrevoked tool, and CWM 2.5.1.2 was installed. I installed ROM Manager and updated to 3.0.0.8.
3. Download the 7.07 leaked radio; download the ROM; download the updated OTA kernel from a few days ago. Link is here.
4. Flash away (I would do ROM, kernel, then radio. Remember to flash dalvik/cache before flashing a kernel; and remember that the radio is flashed in hboot.) Doug Piston's site
Click to expand...
Click to collapse
Is that what you're looking for?
EDIT: In your Step 4, when you go to Doug Piston's site for the ROM flashing tutorial, after the screen shot to "Wipe Cache Partition", I also do the following:
Mounts and Storage - format /system; format /boot; format /data
Advanced - Wipe Dalvik
Then continue on to the following screen shot on the page, with "Installing zip from SD Card".
RMarkwald said:
Is that what you're looking for?
EDIT: In your Step 4, when you go to Doug Piston's site for the ROM flashing tutorial, after the screen shot to "Wipe Cache Partition", I also do the following:
Mounts and Storage - format /system; format /boot; format /data
Advanced - Wipe Dalvik
Then continue on to the following screen shot on the page, with "Installing zip from SD Card".
Click to expand...
Click to collapse
Let me look through your links.. I have already done unrevoked and am S-OFF. I had flashed CM7 but when back to stock looking to flash that OTA that was "suppose" to come out. I'm tired of waiting and Nils ROM looks more of what I am looking for then CM7. But there just seems to be a lot more steps. I am not sure what the latest CWM means? Also not positive on which LCD screen I have.
jamala00 said:
Let me look through your links.. I have already done unrevoked and am S-OFF. I had flashed CM7 but when back to stock looking to flash that OTA that was "suppose" to come out. I'm tired of waiting and Nils ROM looks more of what I am looking for then CM7. But there just seems to be a lot more steps. I am not sure what the latest CWM means? Also not positive on which LCD screen I have.
Click to expand...
Click to collapse
CWM is ClockworkMod Recovery, which is where you go to flash/backup ROMs. You can update it by downloading the zip and putting it onto the root of your SD card, renaming it PB31IMG.zip, booting into the bootloader (phone off, hold volume down and power buttons), and installing it that way.
You can also open ROM Manager to flash a recovery too. Easier that the PB31IMG.zip way, but they both get the same thing done. If you have an SLCD screen and you have the wrong recovery, when you go into recovery the screen will be black with two white lines down the sides, from what I remember.
RMarkwald said:
CWM is ClockworkMod Recovery, which is where you go to flash/backup ROMs. You can update it by downloading the zip and putting it onto the root of your SD card, renaming it PB31IMG.zip, booting into the bootloader (phone off, hold volume down and power buttons), and installing it that way.
You can also open ROM Manager to flash a recovery too. Easier that the PB31IMG.zip way, but they both get the same thing done. If you have an SLCD screen and you have the wrong recovery, when you go into recovery the screen will be black with two white lines down the sides, from what I remember.
Click to expand...
Click to collapse
AH.... .. OK... Don't know why I didn't catch that CWM... I think I have what I need, hopefully tonight after work I can try this out. If I recall I can see what LCD I have by the model number of the phone... I'll google that quick.
Ok so from what I am reading CWM 3x is not required for flashing ROMs on the Inc... I have it installed but it is version 2.x.. Do I have to have version 3x to flash Nil's 3.0 ROM?
It's not, well not necessarily...but for the 2.1/3.0 Sense ROMs ClockworkMod Recovery does need to be at 3.x.
You can go here to download 3.0.0.8, rename it to PB31IMG.zip, put it on the root of the SD card, and with phone powered off hold down volume down + power buttons to get to HBOOT and flash it that way.
There may be a flashable zip for this somewhere to update, but doing this through HBOOT is pretty simple too.
RMarkwald said:
It's not, well not necessarily...but for the 2.1/3.0 Sense ROMs ClockworkMod Recovery does need to be at 3.x.
You can go here to download 3.0.0.8, rename it to PB31IMG.zip, put it on the root of the SD card, and with phone powered off hold down volume down + power buttons to get to HBOOT and flash it that way.
There may be a flashable zip for this somewhere to update, but doing this through HBOOT is pretty simple too.
Click to expand...
Click to collapse
thx.. but can you tell me how I know which screen I have so I do not install the wrong version? From what I am reading there is a version for AMOLED and SLCD??
Forget it.. I see it is for both 3.0.0.8.. thx...!!
jamala00 said:
thx.. but can you tell me how I know which screen I have so I do not install the wrong version? From what I am reading there is a version for AMOLED and SLCD??
Click to expand...
Click to collapse
The green text of version 2.5.1.2 will change to orange for 3.0.0.8.
Got it.. thx...!! Ok just one more question I think.. In step 3
3. Download the 7.07 leaked radio; download the ROM; download the updated OTA kernel from a few days ago. Link is here.
If I go to your link that is the link for the OTA 7.07 Radio. The ROM I know where to get, but what about the kernel? Does that link install both the radio and the kernel? and then I just need the ROM?
jamala00 said:
Got it.. thx...!! Ok just one more question I think.. In step 3
3. Download the 7.07 leaked radio; download the ROM; download the updated OTA kernel from a few days ago. Link is here.
If I go to your link that is the link for the OTA 7.07 Radio. The ROM I know where to get, but what about the kernel? Does that link install both the radio and the kernel? and then I just need the ROM?
Click to expand...
Click to collapse
If you're running a GingerSense ROM (NilsP's Ginger Business Sense is), then go here. The thread for this is here. It's a zip file, you flash in CWM like you did the ROM. Wipe Cache and Wipe Dalvik before flashing a kernel.
If you're running a Froyo 2.2 Sense ROM, you'll need a Sense kernel. An AOSP ROM needs an AOSP kernel. Kernel threads will tell you what version of Android it is compatible with. Flashing an AOSP to Sense won't work, and vice versa. I ran Tiny's Beta5 kernel with NilsP's ROM (here), and it worked great.
The radio link is only for the radio, so it only installs the radio. The kernel link/thread I am linking you to here is for only the GingerSense kernel, compatible with 2.3 GingerSense ROMs.
OK, I think I have it then. I was going to flash Nils •Nils Business GingerSense 3.0 so the link you provided for the kernel should be the one I need right? I have CWM 3.0.0.8 flashed now. I have the correct HBOOT, I also downloaded the OTA Radio, so I think I have everything I need.
One last question if you don't mind... If I use CWM to backup my current system, does it backup, (ROM, radio, and kernel) or if I wanted to go back at anytime would I have to flash the radio and kernel seperate? Have not used CWM to do backup and restore yet.
jamala00 said:
OK, I think I have it then. I was going to flash Nils •Nils Business GingerSense 3.0 so the link you provided for the kernel should be the one I need right? I have CWM 3.0.0.8 flashed now. I have the correct HBOOT, I also downloaded the OTA Radio, so I think I have everything I need.
One last question if you don't mind... If I use CWM to backup my current system, does it backup, (ROM, radio, and kernel) or if I wanted to go back at anytime would I have to flash the radio and kernel seperate? Have not used CWM to do backup and restore yet.
Click to expand...
Click to collapse
Yes, that link is the download for the kernel zip file. It'll prompt you to save it somewhere.
A ROM backup backs up the entire ROM and kernel, radio doesn't get backed up as it is completely separate from the ROM/kernel. Don't need to back up the radio. So if you needed to restore a backup, you'd do the wiping of user data and everything like you do before flashing a new ROM. Then when you go to Backup and Restore - Restore, you select your backup, and it brings it back to the point you made the backup (ROM and kernel).
So keep up to date backups, as if you have say a two month old backup that you'd restore, any texts/app info would restore to the point the two month old backup was made. Does that make sense?
Yep... thx for all the info and taking the time...
No problem! Glad to help!
just curious... do you know if the Clock App that is in the stock Android 2.2... Is that still in Nil's ROM? I had tried CM7 and it was not in there. I use that app all the time, so was just curious if it is in there. I like the Time, Alarm, Timer, Stopwatch all in the same App...
I believe it is, since the ROM uses HTC Sense. It also has the HTC Clock widget.

urgent! stuck on splash!

hey all,
so i am incredibly new to this scene and just recieved my s4. i was preparing to flash a ROM onto my phone, and got it rooted and installed CWM.
I forgot to download the actual ROM zip file, and went into CWM via goo manager, wiped factory/data and cache. It was only AFTER i wiped everything that i realised i didnt download the ROM zip file, so i rebooted the phone and now it is stuck on the start-up splash screen where it displays "Samsung galaxy S4 GT-I9505" and will not continue :crying:
I was running on stock, and had only rooted the phone.
PLEASE i urgently need to fix this ASAP. Help!
Hi,
is there a Odin Version of the Rom you tried to flash? If yes, you could simply bring your device to download-mode and flash the Rom with Odin.
Alternatively search for a odin flashable Recovery and flash this first. Then you could boot to recovery and flash the zip of the Rom.
Sent from my GT-I9505 using xda app-developers app
i tried installing the liquid smooth rom, and from what i can see there is no odin version of the rom :\
Are you able to direct me to an Odin flashable recovery I can use?
im really stressing out about this
i'm in the process of downloading a stock firmware and will try to flash it on, but it's taking forever to download
I don't see why you can't boot again if you have only wiped the user data and cache, just press the home button for 10 seconds and see if it restarts with your reset stock firmware. Otherwise you can reboot into recovery and do the wipes again (not the option to install a new ROM), or put the ROM zip you want to flash on an SD card and then flash from the SD.
I hope this helps.
suwidji said:
hey all,
so i am incredibly new to this scene and just recieved my s4. i was preparing to flash a ROM onto my phone, and got it rooted and installed CWM.
I forgot to download the actual ROM zip file, and went into CWM via goo manager, wiped factory/data and cache. It was only AFTER i wiped everything that i realised i didnt download the ROM zip file, so i rebooted the phone and now it is stuck on the start-up splash screen where it displays "Samsung galaxy S4 GT-I9505" and will not continue :crying:
I was running on stock, and had only rooted the phone.
PLEASE i urgently need to fix this ASAP. Help!
Click to expand...
Click to collapse
You should of made a backup with CWM. That's what it's used for also, besides flashing .zips. Always make a backup that you can restore and keep an extra copy on ur computer and/or a usb drive.
You have to use Odin to flash a stock firmware from Sammobile website. Make sure you download the correct firmware for your phone.
Dont worry, your phone isn't brick.
when i first did the wipe, i chose the option that i was going to install a new ROM. I'm now assuming that's where i made a mistake.
I did make a backup before i wiped everything onto my SD card, but now i can't even access that backup because it's saying there's nothing.
I've tried flashing a ROM onto it, but it says aborted.
Yes SORF ist right. It should boot into resetted stock firmware.
First try to copy the Rom to SD and then boot to recovery an try flashing it.
If booting to recovery doesn't work (but it should work if you just wiped user data and cache) you should try flashing new recovery with odin.
You could use Philz recovery for GT-I9505 from here http://forum.xda-developers.com/showthread.php?t=2281367
Installation Instructions for installation with odin you find here http://forum.xda-developers.com/showpost.php?p=39433857&postcount=4
windozeanti said:
You have to use Odin to flash a stock firmware from Sammobile website. Make sure you download the correct firmware for your phone.
Dont worry, your phone isn't brick.
Click to expand...
Click to collapse
Thanks, that's what I'm doing right now, but the file is about 1.8GB and taking so long to download...
i wish there was a faster server, but this is the only option i could find :\
Have you tried to boot into recovery again and then flash your already downloaded rom from sd? So you don't have to download a complete sammy rom.
j0ch3 said:
Have you tried to boot into recovery again and then flash your already downloaded rom from sd? So you don't have to download a complete sammy rom.
Click to expand...
Click to collapse
yes i have tried that, and it says that install aborts.
Also when i re-wipe everything and then try to reboot, it says my device is missing root.
When i try to re-root, and the device reboots, it gets stuck on the intro screen again so the root doesn't actually complete installing
have you fixed it yet?
so im going to try a different ROM other than the liquid smoothe one i wanted (since it keeps saying aborted)
question: does it matter if i use ANY s4 ROM regardless of carrier? I'm from Australia and there is no specific carrier for my phone on xda
Why does it fails to install? Are there any more error messages?
Also you can try the point "Fix Permissions" under Advanced Options. This could help.
suwidji said:
so im going to try a different ROM other than the liquid smoothe one i wanted (since it keeps saying aborted)
question: does it matter if i use ANY s4 ROM regardless of carrier? I'm from Australia and there is no specific carrier for my phone on xda
Click to expand...
Click to collapse
try something lite like miui - it will save you time on download and is a good solid base to work from. dont flash the lite gapps without a reboot.
for a solid Sami based rom then i suggest using GoldenEye.
scottyf79 said:
try something lite like miui - it will save you time on download and is a good solid base to work from. dont flash the lite gapps without a reboot.
Click to expand...
Click to collapse
ok so i went ahead and found the cyanogenmod one
http://forum.xda-developers.com/showthread.php?t=2317040
and installed this and it works
though i dont like the look of this ROM lol, i prefer something a little more stock looking.
Any recommendations?
When reflashing a new ROM, what is the process i need to follow?
Cyanogenmod is themeable. So you could search for a stock like theme and install that.
If you like an overall more stock rom try scottyf79's recommendation.
If you want to flash a complete new Rom first copy zip onto sd, then boot into recovery, wipe data and cache, then falsh zip file.
Try the Omega Roms. They are close to stock.
Closest to stock are the prerooted DJembey ROMs (the CWM ones) or the Wanam Lite ROM (it's what I am on now)
suwidji said:
ok so i went ahead and found the cyanogenmod one
http://forum.xda-developers.com/showthread.php?t=2317040
and installed this and it works
though i dont like the look of this ROM lol, i prefer something a little more stock looking.
Any recommendations?
When reflashing a new ROM, what is the process i need to follow?
Click to expand...
Click to collapse
personally -
i use Philz recovery
before install of a new rom - i use the "new rom" wipe option rather than the normal data,cache and dalvik wipe (it does this but adds in some extra steps)
then flash the rom of choice
if you get any other messages before reboot - select no
like i said before, if you want a stock looking Sami rom then try Golden Eye.
Try the Omega Roms. They are close to stock.
Closest to stock are the prerooted DJembey ROMs (the CWM ones) or the Wanam Lite ROM (it's what I am on now)

Categories

Resources