Can somebody update this list with the actual links to what you saying to download? I would like to give this a try, but not sure where all these links are.
Assuming you are comfortable with the issues and concepts associated with rooting (terms like bootloader, recovery and ROM's), I suggest you do the following:
1. Go to unrevoked.com and root the Incredible; also run unrevoked-forever to secure S-OFF status.
2. Go to dougpiston.com and get the latest CWM for the phone; 3.0.0.7 if it's Amoled display (Hardware version 2) or SLCD (Hardware version 3). (BTW, note that this ROM erroneously reports Amoled Incredibles as the wrong hardware version). Flash that from hboot. Remove the file from the root directory of the SD card afterwards.
3. Download the 7.07 leaked radio; download the ROM; download the updated OTA kernel from a few days ago.
4. Flash away (I would do ROM, kernel, then radio. Remember to flash dalvik/cache before flashing a kernel; and remember that the radio is flashed in hboot.)
jamala00 said:
Can somebody update this list with the actual links to what you saying to download? I would like to give this a try, but not sure where all these links are.
Assuming you are comfortable with the issues and concepts associated with rooting (terms like bootloader, recovery and ROM's), I suggest you do the following:
1. Go to unrevoked.com and root the Incredible; also run unrevoked-forever to secure S-OFF status. unrevoked.com
2. Go to dougpiston.com and get the latest CWM for the phone; 3.0.0.7 if it's Amoled display (Hardware version 2) or SLCD (Hardware version 3). (BTW, note that this ROM erroneously reports Amoled Incredibles as the wrong hardware version). Flash that from hboot. Remove the file from the root directory of the SD card afterwards. I just ran the Unrevoked tool, and CWM 2.5.1.2 was installed. I installed ROM Manager and updated to 3.0.0.8.
3. Download the 7.07 leaked radio; download the ROM; download the updated OTA kernel from a few days ago. Link is here.
4. Flash away (I would do ROM, kernel, then radio. Remember to flash dalvik/cache before flashing a kernel; and remember that the radio is flashed in hboot.) Doug Piston's site
Click to expand...
Click to collapse
Is that what you're looking for?
EDIT: In your Step 4, when you go to Doug Piston's site for the ROM flashing tutorial, after the screen shot to "Wipe Cache Partition", I also do the following:
Mounts and Storage - format /system; format /boot; format /data
Advanced - Wipe Dalvik
Then continue on to the following screen shot on the page, with "Installing zip from SD Card".
RMarkwald said:
Is that what you're looking for?
EDIT: In your Step 4, when you go to Doug Piston's site for the ROM flashing tutorial, after the screen shot to "Wipe Cache Partition", I also do the following:
Mounts and Storage - format /system; format /boot; format /data
Advanced - Wipe Dalvik
Then continue on to the following screen shot on the page, with "Installing zip from SD Card".
Click to expand...
Click to collapse
Let me look through your links.. I have already done unrevoked and am S-OFF. I had flashed CM7 but when back to stock looking to flash that OTA that was "suppose" to come out. I'm tired of waiting and Nils ROM looks more of what I am looking for then CM7. But there just seems to be a lot more steps. I am not sure what the latest CWM means? Also not positive on which LCD screen I have.
jamala00 said:
Let me look through your links.. I have already done unrevoked and am S-OFF. I had flashed CM7 but when back to stock looking to flash that OTA that was "suppose" to come out. I'm tired of waiting and Nils ROM looks more of what I am looking for then CM7. But there just seems to be a lot more steps. I am not sure what the latest CWM means? Also not positive on which LCD screen I have.
Click to expand...
Click to collapse
CWM is ClockworkMod Recovery, which is where you go to flash/backup ROMs. You can update it by downloading the zip and putting it onto the root of your SD card, renaming it PB31IMG.zip, booting into the bootloader (phone off, hold volume down and power buttons), and installing it that way.
You can also open ROM Manager to flash a recovery too. Easier that the PB31IMG.zip way, but they both get the same thing done. If you have an SLCD screen and you have the wrong recovery, when you go into recovery the screen will be black with two white lines down the sides, from what I remember.
RMarkwald said:
CWM is ClockworkMod Recovery, which is where you go to flash/backup ROMs. You can update it by downloading the zip and putting it onto the root of your SD card, renaming it PB31IMG.zip, booting into the bootloader (phone off, hold volume down and power buttons), and installing it that way.
You can also open ROM Manager to flash a recovery too. Easier that the PB31IMG.zip way, but they both get the same thing done. If you have an SLCD screen and you have the wrong recovery, when you go into recovery the screen will be black with two white lines down the sides, from what I remember.
Click to expand...
Click to collapse
AH.... .. OK... Don't know why I didn't catch that CWM... I think I have what I need, hopefully tonight after work I can try this out. If I recall I can see what LCD I have by the model number of the phone... I'll google that quick.
Ok so from what I am reading CWM 3x is not required for flashing ROMs on the Inc... I have it installed but it is version 2.x.. Do I have to have version 3x to flash Nil's 3.0 ROM?
It's not, well not necessarily...but for the 2.1/3.0 Sense ROMs ClockworkMod Recovery does need to be at 3.x.
You can go here to download 3.0.0.8, rename it to PB31IMG.zip, put it on the root of the SD card, and with phone powered off hold down volume down + power buttons to get to HBOOT and flash it that way.
There may be a flashable zip for this somewhere to update, but doing this through HBOOT is pretty simple too.
RMarkwald said:
It's not, well not necessarily...but for the 2.1/3.0 Sense ROMs ClockworkMod Recovery does need to be at 3.x.
You can go here to download 3.0.0.8, rename it to PB31IMG.zip, put it on the root of the SD card, and with phone powered off hold down volume down + power buttons to get to HBOOT and flash it that way.
There may be a flashable zip for this somewhere to update, but doing this through HBOOT is pretty simple too.
Click to expand...
Click to collapse
thx.. but can you tell me how I know which screen I have so I do not install the wrong version? From what I am reading there is a version for AMOLED and SLCD??
Forget it.. I see it is for both 3.0.0.8.. thx...!!
jamala00 said:
thx.. but can you tell me how I know which screen I have so I do not install the wrong version? From what I am reading there is a version for AMOLED and SLCD??
Click to expand...
Click to collapse
The green text of version 2.5.1.2 will change to orange for 3.0.0.8.
Got it.. thx...!! Ok just one more question I think.. In step 3
3. Download the 7.07 leaked radio; download the ROM; download the updated OTA kernel from a few days ago. Link is here.
If I go to your link that is the link for the OTA 7.07 Radio. The ROM I know where to get, but what about the kernel? Does that link install both the radio and the kernel? and then I just need the ROM?
jamala00 said:
Got it.. thx...!! Ok just one more question I think.. In step 3
3. Download the 7.07 leaked radio; download the ROM; download the updated OTA kernel from a few days ago. Link is here.
If I go to your link that is the link for the OTA 7.07 Radio. The ROM I know where to get, but what about the kernel? Does that link install both the radio and the kernel? and then I just need the ROM?
Click to expand...
Click to collapse
If you're running a GingerSense ROM (NilsP's Ginger Business Sense is), then go here. The thread for this is here. It's a zip file, you flash in CWM like you did the ROM. Wipe Cache and Wipe Dalvik before flashing a kernel.
If you're running a Froyo 2.2 Sense ROM, you'll need a Sense kernel. An AOSP ROM needs an AOSP kernel. Kernel threads will tell you what version of Android it is compatible with. Flashing an AOSP to Sense won't work, and vice versa. I ran Tiny's Beta5 kernel with NilsP's ROM (here), and it worked great.
The radio link is only for the radio, so it only installs the radio. The kernel link/thread I am linking you to here is for only the GingerSense kernel, compatible with 2.3 GingerSense ROMs.
OK, I think I have it then. I was going to flash Nils •Nils Business GingerSense 3.0 so the link you provided for the kernel should be the one I need right? I have CWM 3.0.0.8 flashed now. I have the correct HBOOT, I also downloaded the OTA Radio, so I think I have everything I need.
One last question if you don't mind... If I use CWM to backup my current system, does it backup, (ROM, radio, and kernel) or if I wanted to go back at anytime would I have to flash the radio and kernel seperate? Have not used CWM to do backup and restore yet.
jamala00 said:
OK, I think I have it then. I was going to flash Nils •Nils Business GingerSense 3.0 so the link you provided for the kernel should be the one I need right? I have CWM 3.0.0.8 flashed now. I have the correct HBOOT, I also downloaded the OTA Radio, so I think I have everything I need.
One last question if you don't mind... If I use CWM to backup my current system, does it backup, (ROM, radio, and kernel) or if I wanted to go back at anytime would I have to flash the radio and kernel seperate? Have not used CWM to do backup and restore yet.
Click to expand...
Click to collapse
Yes, that link is the download for the kernel zip file. It'll prompt you to save it somewhere.
A ROM backup backs up the entire ROM and kernel, radio doesn't get backed up as it is completely separate from the ROM/kernel. Don't need to back up the radio. So if you needed to restore a backup, you'd do the wiping of user data and everything like you do before flashing a new ROM. Then when you go to Backup and Restore - Restore, you select your backup, and it brings it back to the point you made the backup (ROM and kernel).
So keep up to date backups, as if you have say a two month old backup that you'd restore, any texts/app info would restore to the point the two month old backup was made. Does that make sense?
Yep... thx for all the info and taking the time...
No problem! Glad to help!
just curious... do you know if the Clock App that is in the stock Android 2.2... Is that still in Nil's ROM? I had tried CM7 and it was not in there. I use that app all the time, so was just curious if it is in there. I like the Time, Alarm, Timer, Stopwatch all in the same App...
I believe it is, since the ROM uses HTC Sense. It also has the HTC Clock widget.
Related
Got Rom Premium, CWM, and AmonRa on N1.
Playing and trying to learn about the manual (green) recovery screens.
Q1: What is the Apply Update:Update.Zip for?
Q2: When in those screens, no buttons I try can take me back to previous screen, like vol- does in AmonRa.
Thanks for any help and I read dozens of search results without really understanding Apply Update and no luck on going back on screens.
I am not expert yet, so please keep replies at a for dummy level.
Ken
If your using Clockword Recovery then Ill help ya out.
1: Thats used if you have the rom or update on the root of your sd card and have it named update.zip. This is how we used to flash roms on the old recovery menus on the G1, they just left it in. Now you can just search your sd card for the rom you want.
2: The power buttom will go back, and if your on the main screen the power button will turn off the display to save power.
What do you mean when you say manual recovery screen? Do you mean the stock recovery or are you talking about a custom? With the stock recovery it will only install files named update.zip signed with google keys. If you are talking about a custom recovery that means that it will search for a file named update.zip and flash that.
Thanks a lot,
1. I thought the zip wasn't needed anymore based on my research.
2. Got it, I swore I tried that.
When on main screen how do you exit it?
Ken
rugmankc said:
Thanks a lot,
1. I thought the zip wasn't needed anymore based on my research.
2. Got it, I swore I tried that.
When on main screen how do you exit it?
Ken
Click to expand...
Click to collapse
1: It isn't, they kind of just left it in as a fast way of flashing without having to look for it.
2: Just hit the reboot option at the top.
One more question, at least for now.
Is going back and forth between recoveries, as easy as just "flashing alternate recovery" from that selection. I.E. CWM to AmonRa and vice versa?
Your help is greatly appreciated
rugmankc said:
One more question, at least for now.
Is going back and forth between recoveries, as easy as just "flashing alternate recovery" from that selection. I.E. CWM to AmonRa and vice versa?
Your help is greatly appreciated
Click to expand...
Click to collapse
Yup. Tho id recommend Clockwork, since im a little bias.
And no prob, I was an android noob at one time.
Ninja Edit:
A warning tho, if you use nandroid, the 2 recoveries don't play nice with each others nandroids.
Thanks McFroger3,
I like what CWM offers just heard some problems with it and AmonRa is rock solid, but more manual and doesn't allow for quick flashes of the CM6 nightlies I am on.
Ken
evilkorn said:
What do you mean when you say manual recovery screen? Do you mean the stock recovery or are you talking about a custom? With the stock recovery it will only install files named update.zip signed with google keys. If you are talking about a custom recovery that means that it will search for a file named update.zip and flash that.
Click to expand...
Click to collapse
I am just talking about the green screens where you do your backup/restores, flash roms etc. Bad semantics on my part. It's where you go when you select Reboot into Recovery on the CWM main screen.
I think I am good to go,
Thanks,
Ken
Ninja Edit:
A warning tho, if you use nandroid, the 2 recoveries don't play nice with each others nandroids.
Right, I am assuming you are talking about Backup with CWM, restore with CWM and same for AmonRa.
Ken
rugmankc said:
Ninja Edit:
A warning tho, if you use nandroid, the 2 recoveries don't play nice with each others nandroids.
Right, I am assuming you are talking about Backup with CWM, restore with CWM and same for AmonRa.
Ken
Click to expand...
Click to collapse
Yea, if you back up with CWM, and try to restore with Amon, you will run into issues lol.
Thanks Again for the heads up,
I read that during my research to solve these issues which you quickly helped me with. I won't mix the two. If CWM works well for me, I will use it most if not all of the time. I got into this helping new rooters on the Nexus One forum when most used 1 click to root and started using Rom Mangager and CWM.
Got to call it a day!
Thanks,
Ken
OK,
I want CWM Recovery to work for me. I flashed the latest nightly from the list in ROM Manager. Followed all prompts and allowed the Google Addons to be downloaded also. OK'd backup. The backup and nightly went fined. But, the gapps hung on installing. Had to pull battery, reboot, and restore to previous backup. All Ok now, but it bothers me and not sure if I want to try again. Have been flashing roms, gapps etc with AmomRa for awhile.
Did I miss something? CWM did all the choosing of what to dl and flash. Something different on gapps? It was hdpi-frf91-2-signed.zip. I know that is not the latest. Latest is frf91-UP. Don't know if that matters.
If I have to copy that to sd and flash, what is the procedure? If I select the latest nightly, I have to tell CWM I don't want the gapps, then does it give me that opportunity to grab the gapps zip from sd card before it flashes the nightly. If not, I have no market on phone to dl anything like Titanium to get phone running.
What am I mising?
I copied latest gapps zip to sd card, did not rename. It has .zip on end. Playing around I selected Install Rom from SD Card and found the zip. Clicked on it. Options under Install Queue screen: Ok or Add Zip. Do I zip since it has one. And this allowing me to queue it and go back and add another rom. Didn't see those choices when I did the procedure from the Download Rom choice on Rom manager main screen.
Easier question may be:
If I want to flash latest nightly and a gapps zip I copied to sd card, the latest. What is the procedure?
It seems CWM won't let me install latest nightly without installing gapps, not the latest. Don't know if that is my problem.
Seems I would need to flash latest nightly again and if ok, just flash latest gapps, no wipe, over the just installed nightly.
And if gapps don't install, I can go back and flash my latest gapps from the sd card.
Any thoughts.
Had to flash my latest .zip fromsd card after the gapps attached to lastest nightly failed to install again.
Resolved
I am running Cyanogen 6.0.0-Heroc. I have been for about 6 months but it has some quirks (locks up sometimes, etc) that may be better with a newer version (I hope). Can somebody please give me very explicit step by step instructions to load a new ROM. Also can you give me a link to the newer version of this ROM.
I was scared to death when I rooted my phone and am equally fearful now. I appreciate your help.
Whoops, accidentally clicked thank
Anyway, I can only speak for what I have done. I have heard that updating to gingerbread takes a slightly different approach. (But I haven't tried it yet)
What I do:
Download the rom and put it on my sd card
Reboot into recovery
NANDROID BACKUP
wipe data/cache/factory reset
wipe davlik
wipe battery stats
flash rom
flash gapps
reboot
Flashing a rom is very easy. I suggest the app rom manager. What you do is you put the . Zip file on the root of your sd card (not in any folders) and re-name it * update* without the *. Now flash clockwork recovery mod and boot your phone into recovery mode via rom manager. It will take you into recovery mode (big surprise) now select install update.zip. this should install the mod right away. the phone will reboot and you have yourself a custom rom my friend.
READ THIS FIRST!!!
troubleshooting and other tips: i put this in because i had countless problems when i first flashed a rom...
if your .zip file won't flash because it says it isn't signed the go to options and disable the need for it to be signed.
so if you are given the option to backup your current mod i highly recomend that especialy if you aren't sure about the rom.
next i suggest getting a rom with gapps as you need that to sync your accounts. just boot to recovery mode then select an option to manually install programs or something like that. select gapps and you're gravy!
i see you need a rom update. i cannot give you the link but look for CM7 it is gingerbread and it looks classy. don't be afraid if it takes a long time to boot. that is natural. it should be in htc hero development forums.
backup everything you can. i suggest creating a folder labeled phone or sd card. copy and paste all files just in case.
if you need any more help I would be glad to help you.
Sent from my HERO200 using XDA App
pandadog11 said:
i see you need a rom update. i cannot give you the link but look for CM7 it is gingerbread and it looks classy. don't be afraid if it takes a long time to boot. that is natural. it should be in htc hero development forums.
Click to expand...
Click to collapse
I've been using that ROM, works great but GPS won't stay locked right now. It's very fast.
It doesn't get any more step-by-step than this:
http://wiki.cyanogenmod.com/index.php?title=HTC_Hero_(CDMA):_Full_Update_Guide
*Evil 4G-G2 v.2 rom
Im having trouble flashing this rom....
Backed up
Deleted portion.
Installed from SD
Then Reboot system
Then it gets stuck on MT4G boot screen.
I my mytouch is updated to the latest update through Tmobile(I dont know if this is the problem)
Its rooted 100% with S-off.
Please help out OH and Clockwork is V.3xx
azzeh3 said:
...OH and Clockwork is V.3xx
Click to expand...
Click to collapse
There's your problem.
ClockworkMod Recovery 3.0.0.5 is for Gingerbread-based (Android 2.3) ROMs. Evil 4G is a Froyo-based (Android 2.2) ROM. These different versions of Android use incompatible filesystems.
How to recover:
1. Download CyanogenMod 7, a Gingerbread-based ROM, to your PC. Choose the newest release candidate (RC2) or the most recently Nightly build.
2. Boot into CWM Recovery, select "mounts and storage" and make your SD card mountable via USB.
3. Copy the CM7 .zip file to your SD card.
4. Install the .zip after a full wipe / factory reset
5. If you want to stay with CM7, also download the Google Applications (Gapps) .zip to your PC, copy to your SD card and and install it after you complete the install of CM7.
6. Boot CM7.
7. If you want to install Evil 4G, run Rom Manager and have it flash CWM Recovery 2.5.1.2, then reboot into Recovery, full wipe / factory reset, and install Evil as previously planned.
Thanks Ill get on it....
So could I just get CM7 on there then get an older version of clockwork to use the backup I made for the Mytouch rom I had before?
Or is the backup I made pretty much lost because Im using Clockwork V3?
azzeh3 said:
Thanks Ill get on it....
So could I just get CM7 on there then get an older version of clockwork to use the backup I made for the Mytouch rom I had before?
Or is the backup I made pretty much lost because Im using Clockwork V3?
Click to expand...
Click to collapse
Your backup was made with an incompatible version of CWM Recovery. It may not be usable. That said, some people have reported in the some of the many many threads on this subject that they have been able to restore a Froyo backup made with V3, while running V2. Your results might match theirs. The steps I show above let you stop at CM7 or continue on to Evil 4G, and do not include restoring your Stock ROM.
azzeh3 said:
Thanks Ill get on it....
So could I just get CM7 on there then get an older version of clockwork to use the backup I made for the Mytouch rom I had before?
Or is the backup I made pretty much lost because Im using Clockwork V3?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=944681
this gets you running with the 2 versions of recovery, one for froyo, one for gingerbread. whichever backup you want to restore, just use the matching recovery so your old backup is fine
I neglected to mention CWMR 3.0.0.6, that camrs73 just posted about, with a link to its main thread. This is a custom version of CWM Recovery built by option94 that supports both Froyo and Gingerbread filesystems. In order to install it, you need to have a functioning Android system first. You can install it =after= you get CM7 or Evil 4G up and running.
Ok thank God lol
Thanks for the Input guys Ill flash CM7 then download that Clock work and let you know how it went.
* Update im running Cm7 and getting CW installed.
azzeh3 said:
* Update im running Cm7 and getting CW installed.
Click to expand...
Click to collapse
From here if you install 3.0.0.6 Clockwork recovery image (link in my signature) you can flash between 2.2 and 2.3 ROMS w/o any problems.
Yes!!! Im saved!!!
Thanks jggimi ,camrs73 and of coarse neidlinger for your clockwork mod!!
One more question...can I have more than one backup saved on Clockwork?
you can have as many as storage space allows and flash whichever one you feel like at the time (with the appropriate recovery of course)
Well, flashing a custom ROM on our beloved Iconias became quite easy now thanks to developers on xda. Most of you are quite familiar with the procedure but there are still people that ask basic things all over the ROM developement threads. This is just a beginner's guide, an attempt to collect all the procedures and tools in one thread. Nothing of this is my work and I would like to say THANK YOU to sc2k, thor2002ro, Euclid's Brother, Chainfire, monki-magic, drellisdee, ezterry, Skrilax_CZ, gersma and all A500 developers for making this possible.
You will need the following: external SD card, root rights, unlocked bootloader (if you're on stock ICS), custom recovery and a custom ROM of your choice.
Well lets start by placing an SD card in the SD card expansion slot. Its file system should be FAT32!
*This is optional: To be sure it is recognized later in CWM, format it first with SD Formatter - a tool that can be downloaded from here. Use your home computer / notebook with a card reader for this procedure. Alternatively you can do this using an ANDROID phone.
1.ROOT
Root for Honeycomb 3.0.1 by monki-magic
original thread by Slowie911 here
1. Make sure usb debugging is turned on and unknown sources is selected in Applications settings.
2. Have a micro sd card inserted and turn the tablet on portrait mode and lock it with the switch to fix it in portrait.
3. Download and execute the attached apk. (i had to download from my comp and transfer to the tablet for it to work).
4. Once the apk is installed run the root procedure within the app which was installed
5. Wait and you will receive full root access.
Download Gingerbreak 1.20
Root for Honeycomb 3.1 by sc2k thread here
1. Goto Settings->Applications and enable "Unkown sources"
2. Download the attached APK file
3. Copy the file to your Iconia
4. Install the APK & start the tool
5. Click "root"
6. Enjoy
/IconiaRoot should work on both 3.0.x and 3.1/
Download Iconiaroot 1.3
Root for Honeycomb 3.2.x OTA
Unfortunately there's no dedicated rooting app yet developed for HC3.2. It also comes with a new bootloader. In order to get root you need to revert to an older version of Honeycomb first where Iconiaroot works. How to do that is explained in details in this thread
UPDATE: if you're on OTA HC 3.2.x then you can just update to ICS and use the method for rooting ICS - links posted below
Root for ICS 4.x.x OTA
Stock ICS Leak One-Click Root Tool by blackthund3r
or
Full root for A500 ICS 4.0.3 - Simple method, posted by ZeroNull
2. Bootloader
Since there are many new ICS custom ROMs and custom recoveries, please read in their dedicated threads if they require ICS bootloader. Some of the ROMs can recognize the version of your bootloader and load the proper boot.img during boot. In general - if you're on Honeycomb - you have HC bootloader. If you've updated OTA to ICS, then you have stock ICS bootloader, that is unusable for flashing custom ROMs and therefore you need the unlocked bootloader. A guide on how to install it read here - thanks civato. This thread links to a nice little piece of software (option 1) by gersma that can automatically do all the job for you - install ICS unlocked bootloader and custom recovery. Read and download here - AfterOTA by gersma
3.Custom recovery
original thread with clockworkmod recovery by thor2002ro here
1. Open Market app with your tablet and search for Acer Recovery Installer.
Acer recovery installer
2. Install it and then open it. It has ClockworkMod Recovery by thor2002ro rev1.3.4 built-in.
3. Select "ClockworkMod Recovery rev.1.3.4 by thor2002ro". Tap on install Recovery Image. A popup offering to backup current recovery image will appear. Surely, buckup! Thus you can restore your original recovery image in case of need. Then CWM will be installed. Once it is installed you can remove Acer Recovery Installer tool from your system if you want.
thor2002ro updated CWM to 1.7.3. You can download the zip from tegraowners.com. Later versions of his recovery does not meet GPL because of the "mini" kernel of his - sources not being released. It supports flashing both from internal memory and the external SD card. In order to update your CWM to this latest version, place the downloaded ZIP on your external sd card and update from your CWM by choosing install zip from sd card. Alternatively you can extract the recovery.img from the zip, place it on your external sd card and install it through Acer Recovery Installer by choosing Custom or Stock recovery.img from micro sdcard.
GPL compliant recoveries
RA Revamped for Iconia
TeamWin Recovery Project (twrp) - needs ICS bootloader
A500 Public Recovery
Since the creation of AfterOTA by gersma, you can use his software to install both the bootloader and CWM before flashing the ROM. Get it HERE
4. Flashing custom ROM
Download the ROM of your choice which should be a zip file. Place the zip on your EXTERNAL SD card. Power off your device. Now hold volume down and power buttons together until you see text appearing on the top left corner of the screen - you can release both buttons now. Wait until CWM loads. Volume keys (Up and Down) are used to navigate the CWM menu. Power button is uded as "Enter" i.e. to proceed with your selection. Before going on to install your ROM do a full backup of your system first. Navigate to "backup and restore" and then select Full Backup. Wait untill the operation completes.
Now do the following:
Wipe menu:
- wipe data/factory reset -> navigate to "Yes - delete all user data"
this should format you data partition and cache partition (dalvik cache is gone as well)
Mounts and storage menu
- Format System
this should format your system partition
The above commands are presented in thor's CWM. There are slightly different menus and sub-menus in the other custom recoveries but if you dig a little you'll find that they do the same things and you'll get the idea of what you're doing.
Now you're ready to install your ROM. Get back to the main CWM menu and select
- Install zip from sdcard -> choose zip from sdcard.
Navigate to your zip on the SD card and install it - choose "Yes" again to install. Wait untill installation is complete, return to the main CWM menu and choose "reboot system now".
You're done, enjoy your first custom ROM. Take time for its initial configuration.
5. Flashing custom KERNEL
Flashing custom kernel is as same as custom ROM. You place the zip (Kernels come in zip files as well) on your external SD card and:
- Install zip from sdcard -> choose zip from sdcard.
It is recommended before flashing a new kernel to wipe cache partition and dalvik cache. And of course first you flash the ROM and then the desired Kernel
6. UNBRICKING by flashing a stock ROM
thanks to vache we have full packages shared in his topic
vache said:
Once the desired file downloaded, you have to use Acer Update Decryter by thor2002ro to decrypt them.
After decrypting the file, you have to extract the update.zip from it, put it on an external SDCard (does not work on internal memory) and boot your tablet with Vol- & Power. The update will launch automatically.
Click to expand...
Click to collapse
p.s. Feel free to add stuff to this tutorial - video, pistures or anything you find useful or to correct me if I've made a mistake.
This is fantastic. Thank you. I have had my iconia for a month now and been looking at flashing a custom rom but kept backing out. Just a couple of questions for clarification:
(1). Does wiping data erase the internal sd?
(2). If by some stroke of bad luck a flash is unsuccessful and a boot loop or similar occurs, am I right in my understanding that you can just go straight back into recovery and re-flash?
(3). What are the chances of bricking the tablet?
Sorry for noon questions, please just wanna certain because my gf bought me this tablet under the condition I don't do anything risky like on my x10 that I flash almost daily haha
Thanks for replies
Sent from my A500 using XDA Premium App
kylec said:
This is fantastic. Thank you. I have had my iconia for a month now and been looking at flashing a custom rom but kept backing out. Just a couple of questions for clarification:
(1). Does wiping data erase the internal sd?
(2). If by some stroke of bad luck a flash is unsuccessful and a boot loop or similar occurs, am I right in my understanding that you can just go straight back into recovery and re-flash?
(3). What are the chances of bricking the tablet?
Sorry for noon questions, please just wanna certain because my gf bought me this tablet under the condition I don't do anything risky like on my x10 that I flash almost daily haha
Thanks for replies
Sent from my A500 using XDA Premium App
Click to expand...
Click to collapse
1. No, it doesn't.
2. Yes. You can do that. There's another option in mounts and storage -> format system - that will format even your system partition and leave your device bare with no ROM files on it. That would be a really clean install I guess
EDIT: I just saw that system is formatted during ROM installation. So no need to do that
3. Always read first what option you've selected and be sure you understand what it does. If you have CWM successfully installed, you have a powerfull tool to restore reflash, wipe, format etc. I've flashed my HD2 hundreds of times and now my Iconia is on the run Never ever had a boot failiure.
drkalo said:
1. No, it doesn't.
2. Yes. You can do that. There's another option in mounts and storage -> format system - that will format even your system partition and leave your device bare with no ROM files on it. That would be a really clean install I guess
3. Always read first what option you've selected and be sure you understand what it does. If you have CWM successfully installed, you have a powerfull tool to restore reflash, wipe, format etc. I've flashed my HD2 hundreds of times and now my Iconia is on the run Never ever had a boot failiure.
Click to expand...
Click to collapse
Thank you very much. I will click thanks when I'm on my computer :-D
Sent from my A500 using XDA Premium App
VERY good information here. Thank you very much for taking the time.
I've flashed ROMS on my last two "chinatabs" but haven't gotten into it with my A500 yet. (To be frank, I'm still thrilled with the prospect of OTA updates from a manufacturer after my last experiences.)
It looks like the process is very similar to my Rena3 tablet.
strider_mt2k said:
VERY good information here. Thank you very much for taking the time.
I've flashed ROMS on my last two "chinatabs" but haven't gotten into it with my A500 yet. (To be frank, I'm still thrilled with the prospect of OTA updates from a manufacturer after my last experiences.)
It looks like the process is very similar to my Rena3 tablet.
Click to expand...
Click to collapse
Thank you, that lays it out all nice and precise for us all. Like strider_mt2k, I have been holdng off on the custom ROMs, because my first tablet was a Gtab, and while it became a pretty awesome tablet, it had to be flashed with a custom ROM to be really usable. The OTA thing was holding me back. But I think that I may try to flash the thing this weekend if I get the chance.
Thanks. Glad it could be of use.
nice tutorial dude! thanks!!
could you please make another tutorial to return back to stock?
specially to return back to stock te kernel.
thanks!!!
As mentioned, best case is if you've backed up your device before flashing any ROM or Kernel. Thus you can restore to your country specific version.
Otherwise its pretty simple - its just like flashing any other ROM following the steps described.
Download the stock one that dr1337 shared from here:
http://forum.xda-developers.com/showthread.php?t=1154492
or choose the right full package - shared by vache:
decript it with Acer update decripter by thor2002ro
Of course they come with stock kernel
I am new in this with flashing and that kind of stuff.
Now is my question, how is it with updates from acer?
Greetz
distructor said:
How is it with updates from acer?
Click to expand...
Click to collapse
I'm not sure I understand your question. Could you be more specific?
if i put a custom rom on the device could i still use the build in update program of acer?
distructor said:
if i put a custom rom on the device could i still use the build in update program of acer?
Click to expand...
Click to collapse
Unfortunately I can not tell you for sure. I haven't tried all of the custom ROMs but in most cases - no you won't be able. I've tried Tabooney, Honeyvillain, Virtuous Picasso, Virtuous Galaxy. ROM developers usually update their ROMs to the latest base available. I think it depends on many things - base, kernel, stock apps removed etc.
Maybe someone who have succeeded with custom ROM updating would share his experience.
Can anyone tell me if there is a version of ROM manager that supports the version of CWM that there is for the Iconia. I would love to be able to simplify my ability to backup my ROM's before flashing.
synapses11 said:
Can anyone tell me if there is a version of ROM manager that supports the version of CWM that there is for the Iconia. I would love to be able to simplify my ability to backup my ROM's before flashing.
Click to expand...
Click to collapse
You can install a clockworkmod for Iconia no matter of the version of ROM manager. But it is much much easier to use Acer Recovery Installer. I recommend you using it instead of playing with recovery img files. It is a one time procedure after all
Anyway - here's what you need to do if you don't want to use Acer recovery installer, or you don't want to use ADB:
http://www.addictivetips.com/mobile/how-to-install-clockworkmod-recovery-3-using-rom-manager/
instead of CWM 3.x you will need to get CWM from thor2002ro In this guide you substitute the recovery that ROM Manager is about to flash with thor's CWM. I haven't tried this method myself but it should work.
With Acer Recovery Installer you can flash custom recovery as well. As long as you have it in IMG format you can be flashed from within the app - "install custom or stock recovery image from sd card".
great thread.
thanks!!!
Great Tutorial!!!
Just a couple of doubts:
First question: Backup files.
3. Flashing custom ROM
"...Before going on to install your ROM do a full backup of your system first. Navigate to "backup and restore" and then select Full Backup. Wait untill the operation completes. "
Where do the backup files go in the system? On internal or external SD card? Is it an *.img file extension?
Should i move it to my computer to keep it save, or just leave it where ever they are?
Second question: Kernel.
4. Flashing custom KERNEL
"Flashing custom kernel is as same as custom ROM. You place the zip (Kernels come in zip files as well) on your external SD card and:
- Install zip from sdcard -> choose zip from sdcard.
It is recommended before flashing a new kernel to wipe cache partition and dalvik cache. And of course first you flash the ROM and then the desired Kernel"
I am on Stock 3.1 ROM with original Kernel, if i want to try Virtuos Picasso, do i have to flash a new Kernel? And if yes, shouldn't i do it before flashing the ROM? Or just flash the ROM and then the Kernel? What happens if i just flash the Rom and use the stock kernel?
Thank you..
Your backup goes to your external SD card in a folder named clockworkmod\backup\2011-XX-XX.HH.MM.SS
As you can guess the name of the backup corresponds to the time it is created. This backup can be used to restore your system through CWM in case of need.
CWM does not backup /data/media folder. Additionally: you should also delete .android_secure.img from your backup set or a full restore will fail before it restores flexrom.
The last is an issue described by Euclid's brother:
http://forum.xda-developers.com/showpost.php?p=16467191&postcount=3
I am on Stock 3.1 ROM with original Kernel, if i want to try Virtuos Picasso, do i have to flash a new Kernel?
Click to expand...
Click to collapse
No, of course! Your custom ROM (Virtuous Picasso in your example) and any ROM comes with its Kernel. Its up to you to decide wheather to change it or not after that by flashing another Kernel. Follow every Kernel developer's notes for ROM compatibility. So, that answers the last part of your question - you cannot flash Virtuous Picasso and still think you're on stock kernel
drkalo said:
No, of course! Your custom ROM (Virtuous Picasso in your example) and any ROM comes with its Kernel. Its up to you to decide wheather to change it or not after that by flashing another Kernel. Follow every Kernel developer's notes for ROM compatibility. So, that answers the last part of your question - you cannot flash Virtuous Picasso and still think you're on stock kernel
Click to expand...
Click to collapse
Oh, i see...i thought that the flashing ROM procedure of a custom ROM, would just flash the ROM and not the Kernel...so in this case i just have to choose the ROM that i want to flash and do not have to pay attention about the Kernel compatibility...unless i flash a Kernel only. Right?
Thank you very much!!
That is correct
Got ICS, OTA (download) installed that no problem, downloaded the acer usb drivers and used ICS Root (blackthund3r). Now i want to install LightSpeed 4.4 (i know theres a newer version) I renamed it update.zip and did the power button + V- button but it says invalid image.
Now im a bit confused cause all this android stuff is new to me, I have the acer recovery installed but im not sure what to do with it. Tried renaming it to recovery.img it says it is flashing but nothing happens.
Kinda lost at what to do or how to get this rom working.... if someone could point me in the right direction it would be sweet
Fox
foxorroxors said:
I renamed it update.zip and did the power button + V- button but it says invalid image.
Fox
Click to expand...
Click to collapse
Yep. That was pretty n00b of ya (that little trick only works on signed official roms, and even then, only ify-ify)
Check this thread. It has the tools you need.
http://forum.xda-developers.com/showthread.php?t=1622425
You can skip the part about installing an ICS rom and rooting. You already did that. You need to do steps 1, 2, (partial 4) 5 or 6 basically.
Note after you rooted. Look at step 4 and delete the required file like it says, before going to steps 5 or 6. You have an option on which package to use. Personally, I like the exe package. But your choice.
This installs patched b-loader and CWM recovery so you can flash ICS only Roms.
Easy
As you've Acer Recovery why the difficult way ? Just choose "Download / Install Roms, tick Lightspeed 4.4 in the left column, hit download and then install.
(i've version 2.74)
Fast, easy and no problems. I flashed Flexreaper 14 (now replaced by Flexreaper ICS RF1) and i can recommend it, the Rom and the way of flashing it.
urbie47 said:
As you've Acer Recovery why the difficult way ? Just choose "Download / Install Roms, tick Lightspeed 4.4 in the left column, hit download and then install.
(i've version 2.74)
Fast, easy and no problems. I flashed Flexreaper 14 (now replaced by Flexreaper ICS RF1) and i can recommend it, the Rom and the way of flashing it.
Click to expand...
Click to collapse
Acer recovery is fine if it'll install the patched Bootloader.
However, it doesn't make a user get his UID number, which is essential in case something happens in the future. Without your UID, you're basically toasted Or you're in for the long haul in figuring out how to unbrick a tab.
help
I need help for boot loader.I tried to put ICS boot loader v3, I didn't success and now I can't put another rom(I have ICS for A500 but I use A501 and it doesn't work 3G modem).How I can put other rom?
Erasing cache before SD update...
SD update cmd recovery
--update_package=SDCARD:update.zip
Booting recovery kernel image
Recovery verified failed...
ores992 said:
I need help for boot loader.I tried to put ICS boot loader v3, I didn't success and now I can't put another rom(I have ICS for A500 but I use A501 and it doesn't work 3G modem).How I can put other rom?
Erasing cache before SD update...
SD update cmd recovery
--update_package=SDCARD:update.zip
Booting recovery kernel image
Recovery verified failed...
Click to expand...
Click to collapse
You can't run that update.zip like you did. You got the error message.
Can you still boot into the 500 Rom? If so, you need to install a CWM Recovery before you can flash custom Roms. Look at the link below for instructions for CWM installation.
If you can't boot into your System, then you will need to do everything again.
You should still have your UID number when you tried to NVFlash the ver3 bootloader (I hope you wrote that number down)
You need to probably re-install the ver3 bootloader again as your attempt to install an update.zip messed things up. You just can't do it that way. So go here;
http://forum.xda-developers.com/show....php?t=1622425
Only this time, follow the instructions. You need to install CWM recovery. This is how to flash Roms, not putting update.zips on the SD card. And BTW, you should delete that update.zip from Your EXT SD Card. It will cause problems.
Also note, in those instructions, if you installed the FULL 500 ROM, you must delete a certain boot-p file before you install CWM Recovery. Or else it will delete it when you reboot the tab. Again, read the instructions.
The above steps install a 500 rom. The 500 DOES NOT have 3g like a 501. This is why you had no 3g. You have to install a 501 ICS Rom after, through CWM Recovery, and, currently, I have the only ICS Rom for the 501. And... it's a Beta release from Acer. But it works ok mostly.
Read the instructions, and understand exactly what you are doing. Also remember, with ver3 ICS Bootloader, YOU CANNOT INSTALL HC BASED ROMS without going back to an HC based bootloader. ICS Roms only. (unless you want to go back to stock).
Moscow Desire said:
You can't run that update.zip like you did. You got the error message.
Can you still boot into the 500 Rom? If so, you need to install a CWM Recovery before you can flash custom Roms. Look at the link below for instructions for CWM installation.
If you can't boot into your System, then you will need to do everything again.
You should still have your UID number when you tried to NVFlash the ver3 bootloader (I hope you wrote that number down)
You need to probably re-install the ver3 bootloader again as your attempt to install an update.zip messed things up. You just can't do it that way. So go here;
http://forum.xda-developers.com/show....php?t=1622425
Only this time, follow the instructions. You need to install CWM recovery. This is how to flash Roms, not putting update.zips on the SD card. And BTW, you should delete that update.zip from Your EXT SD Card. It will cause problems.
Also note, in those instructions, if you installed the FULL 500 ROM, you must delete a certain boot-p file before you install CWM Recovery. Or else it will delete it when you reboot the tab. Again, read the instructions.
The above steps install a 500 rom. The 500 DOES NOT have 3g like a 501. This is why you had no 3g. You have to install a 501 ICS Rom after, through CWM Recovery, and, currently, I have the only ICS Rom for the 501. And... it's a Beta release from Acer. But it works ok mostly.
Read the instructions, and understand exactly what you are doing. Also remember, with ver3 ICS Bootloader, YOU CANNOT INSTALL HC BASED ROMS without going back to an HC based bootloader. ICS Roms only. (unless you want to go back to stock).
Click to expand...
Click to collapse
Thanks, but that link is dead
ores992 said:
Thanks, but that link is dead
Click to expand...
Click to collapse
Yeah, XDA did some cleaning up overnight. Try it now;
http://forum.xda-developers.com/showthread.php?t=1622425
MD