Database Users

[Q] Restoring my mt4g

I rooted my phone. I flashed it. and i was attempting to put in iced glacier. I messed up one of the steps -.-
On the clockworkmod recovery i backed up my phone.
I restored it then hit reboot now.
I've waited for a while.. But all i'm getting is the mytough 4g screen >.<
Any ideas?

boot back into recovery and clear cache, advanced>dalvik cache, and data

cybereclipse said:
boot back into recovery and clear cache, advanced>dalvik cache, and data
Click to expand...
Click to collapse
I think I am in the same boat as the OP.
I rooted the Mt4g, backed up stock Sense Froyo with Clockworkmod 3, then installed Cyanogenmod 7 with Clockworkmod 3.
I want to revert back to the stock Sense Froyo. I simply did a restore in Clockworkmod 3 to my Sense Froyo backup, and now all it shows is the white Mt4g screen.
Will clearing the cache and data before restoring the Sense Froyo be my fix too?
Thanks. OP, didnt mean to take over your thread but I think we are having the same issue so didnt want to make another thread.

The version of ClockworkMod Recovery you are using MATTERS. It MATTERS VERY MUCH.
Froyo based ROMs, including Stock and Iced Glacier, must be backed up, restored, and installed with CWMR Version 2. Gingerbread based ROMs such as CM7 must be backed up, restored, and installed with CWMR Version 3.
A higher number does not mean better. There are filesystem differences between Froyo and Gingerbread that require the correct tools.
There is a custom version of CWMR for the MT4G that can handle both types of filesystems (assuming you haven't already used the wrong tools) -- it is called version "3.0.0.6" -- you can look for it on the Development Sub Forum.

Thanks for your reply. Unfortunately I did not know that information at the time when I created the restore file.
When restoring with Clockworkmod 3 failed, I flashed Clockworkmod 2 and restored the recovery made by 3 using 2. Its working so far... It did show one or two errors when I restored.

cybereclipse said:
boot back into recovery and clear cache, advanced>dalvik cache, and data
Click to expand...
Click to collapse
So i'm new to all of this.
I don't want to make the wrong move.
I've got CWMR v3.0.0.5
Just to be clear. I go into CWMR. Do i wipe cache partition, then wipe dalvik cache, wipe data.. then restore again? or reboot system now?
OR do I need to flash CWMR 2 or 3.0.0.6? If so. How do i do that without going through rom manager? I'm noob.
Thanks!

Frankasaurus said:
So i'm new to all of this.
I don't want to make the wrong move.
I've got CWMR v3.0.0.5
Click to expand...
Click to collapse
That is incompatible with Iced Glacier. You can't use 3.0.0.5 with Iced Glacier, or with the Stock ROM. Ever.
In addition, clearing /cache and /data and the Dalvik cache (which is inside of the /data partition, so won't actually do anything if /data is also reformatted) will not solve your problem. Because ....
The partition with the problem is /system -- which is where the ROM lives. That partition is now in EXT4 format, which a Froyo-based ROM cannot access. The Froyo kernel boots (from the /boot partition) and gets errors when it looks in /system.... and reboots. Hence, your boot loop.
Your easiest fix would be to install CM7 so that you have a functional Android OS on your phone. THEN ..... after getting CM7 running, flash a version 2 image of CWMR from ROM Manager (included in CM7), then boot it, and install Iced Glacier.

jggimi said:
Your easiest fix would be to install CM7 so that you have a functional Android OS on your phone. THEN ..... after getting CM7 running, flash a version 2 image of CWMR from ROM Manager (included in CM7), then boot it, and install Iced Glacier.
Click to expand...
Click to collapse
Sounds like that's the course of action. Any threads leading to how to install CM7 in my situation? I'm watching youtube videos on different things trying to learn the best option. But I don't really want to trust tho

From Recovery 3.0.0.5, mount your SD card for use with USB (in the mounts and storage menu) and transfer a CM7 .zip to the card. Get it from http://mirror.teamdouche.net/?device=glacier
Factory wipe / System Reset from the main menu of Recovery, and install the .zip as you did Iced Glacier.
----
CM7 does not include Google Apps. If you were intending to actually =use= the ROM instead of using it temporarily as part of a rescue process, you will likely want them. The .zip can be found at http://android.d3xt3r01.tk/cyanogen/gapps/gapps-gb-20110120-signed.zip -- install from Recovery after installing CM7.
----
Boot CM7. You'll find ROM Manager in the App drawer. Use it to Flash a version 2.x CWM Recovery -- look under "All ClockworkMod Recoveries" at the bottom of the ROM Manager main screen.
Long press the power button. Select Reboot. CM7 will prompt you for what kind of boot. Select Recovery.
Do another full wipe/factory reset. Install Iced Glacier .zip as you did previously, and reboot.

jggimi said:
CM7 does not include Google Apps. If you were intending to actually =use= the ROM instead of using it temporarily as part of a rescue process, you will likely want them. The .zip can be found at ... -- install from Recovery after installing CM7.
Boot CM7. You'll find ROM Manager in the App drawer. Use it to Flash a version 2.x CWM Recovery -- look under "All ClockworkMod Recoveries" at the bottom of the ROM Manager main screen.
Click to expand...
Click to collapse
So the second zip is only if I want to keep the CM7 ROM? If I do, then I use that zip to get Google Apps?
Also, before I look under "All ClockworkMod recoveries" will I have to install CWM recovery 3.0.0.6 or 2.x first?
In that case. I'll do some research on CM7 too. Idk if iced glacier is better or CM7. Maybe it just depends on preference?

Frankasaurus said:
So the second zip is only if I want to keep the CM7 ROM? If I do, then I use that zip to get Google Apps?
Click to expand...
Click to collapse
Correct.
Also, before I look under "All ClockworkMod recoveries" will I have to install CWM recovery 3.0.0.6 or 2.x first?
Click to expand...
Click to collapse
3.0.0.6 could be used instead of a 2.x version. But it requires its own manual install. Based on the questions in this thread, I'm not recommending CWM Recovery 3.0.0.6 at this point, as you folks do not have a functioning Android system and would have to modify the 3.0.0.6 install procedures. There's only so much knowledge a person can absorb at once. Get your phones working, first.
In that case. I'll do some research on CM7 too. Idk if iced glacier is better or CM7. Maybe it just depends on preference?
Click to expand...
Click to collapse
It is =entirely= a matter of personal preference. There are plenty of people who prefer one over the other. There are also those who prefer neither, and are using yet again another ROM. Poke around in the forum threads here to get a feel for what people think.

jggimi said:
3.0.0.6 could be used instead of a 2.x version. But it requires its own manual install. Based on the questions in this thread, I'm not recommending CWM Recovery 3.0.0.6 at this point, as you folks do not have a functioning Android system and would have to modify the 3.0.0.6 install procedures. There's only so much knowledge a person can absorb at once. Get your phones working, first.
Click to expand...
Click to collapse
sweet. So i'll go with the 2.x version then. In that case, I won't have to install it? it'll just be there?
I'm not at home so I can't try any of it out yet. Just trying to learn as much as i can first

ROM Manager should be able to pull the image from the Internet. CM7, even without Google Apps, should automagically connect your phone and its number and its data plane to T-Mobile's network.

zomg. this is sweet. Thanks for all your help!!! I'm gonna keep CM7 for now. I installed the google app zip. Any suggestions on where to start exploring? The main thing that i wanted to root my phone for was to take screenshots. threads? Bah. so much to explore!

So if on 3.0.0.6 and wanting to go from CM7 to IG, you recommend going into "all clockworkmod recoveries", switching over to a 2.0 version (does it matter which?), and then doing backup, wipe, install?

No. 3.0.0.6 is a unique, one-off version that supports both ext3 and ext4 file systems, and deals correctly with both Froyo and Gingerbread ROMs.
If you were on 3.0.0.5, and wished to install a Froyo ROM, you would back up first, before flashing a 2.x Recovery. Think about it.
HTC Glacier CM7 #5

jggimi said:
No. 3.0.0.6 is a unique, one-off version that supports both ext3 and ext4 file systems, and deals correctly with both Froyo and Gingerbread ROMs.
HTC Glacier CM7 #5
Click to expand...
Click to collapse
So I can just go directly into recovery from Rom Manager and backup/wipe/install Iced Glacier?

Yep. Please see the threads on it in the development sub forum.
HTC Glacier CM7 #5

jggimi said:
Yep. Please see the threads on it in the development sub forum.
HTC Glacier CM7 #5
Click to expand...
Click to collapse
Been reading them, but there is 371 pages in the nighlies thread, and 54 pages in the RC7 thread...I'm bound to miss a thing or two, I'm human
But thank you!

The 3.0.0.6 threads. Much lighter reading.
HTC Glacier CM7 #something

[Q] Help Please recovery problems rooted stock rom

Okay, so where to start...
I have a MT4G (of course) i love it dont get me wrongand wanted to mess around with it. i permarooted it via VISONary + and everything was working fine. i wanted to flash a different kernal and wanted to do a nandoird backup before i did anything else. but i needed clockwork to do this (correct me please if im wrong) so i downloaded rom manager flashed it. and went to boot into recovery and it does this icon with a phone and a "!" on the screen...it cant boot into recovery. and i dont know why, and now i just want to go back to my stock recovery but i cant cause i dont know how. ive tried terminal commands... and i tried to learn adb and fastboot but am very lost. basically i want a nandroid of my rooted stock ROM... any help would be much appreciated

The reason is because you need to turn s=off for any of those to work.
Sent from my LogicPD Zoom2 using Tapatalk

how do i do that?

drpepper4lf said:
how do i do that?
Click to expand...
Click to collapse
Read the guides.

1. The phone with the red triangle icon is from the stock Recovery program. Stock recovery does nothing except show you that screen, unless a special file is found on the SD card, used for a complete system restore. Your flash of ClockworkMod Recovery was unsuccessful.
2. When you do go get past the S=Off phase, and are ready to once again attempt to install CWM Recovery, be sure you install the CORRECT version. CWMR 3.0.0.5 is for Gingerbread (Android 2.3) based ROMs only! Don't install 3.0.0.5 expecting it to function properly for the Stock ROM, for Iced Glacier, or any other Froyo (Android 2.2) based ROMs. Those all require CWMR 2.x. A higher version number does not mean better. For example, if you are planning to install CM7, back up with CWMR 2.x, then flash CWMR 3.x before installing CM7.
(There is a special, unique to MT4G version of CWMR that handles both Froyo and Gingerbread ROMs, called "3.0.0.6". You can find threads on it in the Development subforum.)

[Q] Stock ROM->Cyanogen Via Androot and RomManager?

Is it possible to go from Stock ROM to CyanogenMod via this path:
1. Using Universial Androot to root
2. Install RomManager from the market
3. Install Clockworkmod recovery 3.0.6 from Rom Manager
4. Install CyanogenMod from RomManager
That would be very easy compared to using adb. And it does not require a PC like the various one click root methods.
It should work?

I am asking because these optiions are already in the cyanogenmod wiki (some of them put there by me)
And if it works without problems, it should probably be the recommended update path.
I might try it out myself, but it requires me to go back to stock rom, which I haven't done before. If I understand correctly, it is not possible to flash a 1.6 ROM from a new Clockworkmod recovery, I would have to go back to maverick or amon ra recevery?
I am running Cyanogenmod nb 12, and clockworkmod recovery 3.0.6 at the moment.

to get back to stock rom, you just have to connect your phone to the PC, and double click the .exe of the ROM

I am not using windows, and do not have a rom exe file. I rooted and flashed my phone via adb on linux. I do have a nandroid backup of my stock room after it was rooted though.

Then flash back the old amonra recovery, before restoring your backup because it won t work with the latest clockworkmod

christick said:
Then flash back the old amonra recovery, before restoring your backup because it won t work with the latest clockworkmod
Click to expand...
Click to collapse
Ok thanks, I just heard from some one at cyanogen that using RomManager to flash the recorvery on a rooted stock rom won't work. So I guess the update path in the first post is not valid...

finnk said:
It should work?
Click to expand...
Click to collapse
Uhm... I think not: is missing the "insmod tattoo-hack.ko" and it will fail the "remount" operation (and then the flash).
IMHO.
Bye
Diego

diego72 said:
Uhm... I think not: is missing the "insmod tattoo-hack.ko" and it will fail the "remount" operation (and then the flash).
IMHO.
Bye
Diego
Click to expand...
Click to collapse
Yes, I think you are right. Stock rom needs the tattohack loaded before flashing a recovery.

finnk said:
Yes, I think you are right. Stock rom needs the tattohack loaded before flashing a recovery.
Click to expand...
Click to collapse
Well, i had a CyanogenMod "installed" on my tatto, and i flashed it back to the stock 1.6 rom without installing anything, without problem.
i guess that's the question, isn't it?

I used the method you're saying, Androot+Flash Recovery from Rom Manager to the latest ClockworkMod and unfortunately it's not working.
I don't know if it is because the new clockworkmod but my advice is don't use this method. I posted some questions in other threads but nobody could help me.
I reflashed Clockwork several times even to 3.0.6, but the startup recovery menu still the same.

brick Nexus S

Hello. i am new to the android family
i have a nexus s GT-9020T
i have rooted my phone but without setting the clockworkmod reovery.
today i was playing with the rom manager and downloaded one of the rom from the list. after installation i was unable to start the phone only seeing the google logo with the unlock logo.
i went back into the recovery by typing flash recovery recovery.img etc.
run a restore and restart the phone but still not work
my nexus s is 2.3.4 by the way.
please assist

What "restore" did you run?
Go here: http://forum.xda-developers.com/showthread.php?t=1056062
And download the full rom:
Model: i9020T
Full Rom: GRJ22, KD1
That'll revert your Nexus S to the latest completely stock 2.3.4
Then you can flash recovery again and go back to clockwork mod and go flash another rom or whatever.
Remember when you're flashing a new rom you need to wipe data and cache and dalvik cache.

i run an restore from the backup that i made before installing the new rom using clockwork mod recovery, its part of the option when installing the rom using the rom manager * click box - backup * etc something like that

sheunghko said:
i run an restore from the backup that i made before installing the new rom using clockwork mod recovery, its part of the option when installing the rom using the rom manager * click box - backup * etc something like that
Click to expand...
Click to collapse
Next time don't use Rom Manager to make backups or flash roms. It's stupid and can get you issues like you're having.
Anyways, try wiping data and cache then restoring the backup, do it in Clockwork Recovery.
Let it boot, first boot always takes a while, 5-10 minutes. If you see the boot animation freeze, stop and restart, then yeah it's screwed up, otherwise, just let it is.
If still not working from your backup, do what I said in previous reply, just restore to stock 2.3.4 then re flash clockwork mod and start over with the rom you want to flash.

thank your nxt. i have found the real problem. it was not my backup problem or the rom that u provided. it was the version of my clockwork mod recovery. i was using an 2.x.x.x to restore the phone which is why it doesn't work. everything work fine now after i flashed with an 3.x.x.x and restore the phone. one question thou, where can i always find the newest clockwork mod recovery release ? thank you very much

sheunghko said:
thank your nxt. i have found the real problem. it was not my backup problem or the rom that u provided. it was the version of my clockwork mod recovery. i was using an 2.x.x.x to restore the phone which is why it doesn't work. everything work fine now after i flashed with an 3.x.x.x and restore the phone. one question thou, where can i always find the newest clockwork mod recovery release ? thank you very much
Click to expand...
Click to collapse
http://mirrorbrain.cyanogenmod.com/cm/recoveries/
Or just use ROM Manager to get the latest.
That's the only thing I use ROM Manager for... getting the latest Recovery.

thanks again nxt. if you don't mind really ...i have one more question. i know the phone intend to uninstall clockwork mod recovery once its restarted. i know there is command type into the cmd to avoid the phone uninstall the clockworkmod reovery and make it permanent in another word. I didn't run those command when i root my phone because i don't know if its good to make it permanent like.... hmmm like if there will be a 2.3.5 coming next month..just saying ok... with a permanent unofficial recovery will cause a problem?

sheunghko said:
thanks again nxt. if you don't mind really ...i have one more question. i know the phone intend to uninstall clockwork mod recovery once its restarted. i know there is command type into the cmd to avoid the phone uninstall the clockworkmod reovery and make it permanent in another word. I didn't run those command when i root my phone because i don't know if its good to make it permanent like.... hmmm like if there will be a 2.3.5 coming next month..just saying ok... with a permanent unofficial recovery will cause a problem?
Click to expand...
Click to collapse
Are you running custom ROM? If you are, it's already made to not revert back to stock recovery. If you leave it stock recovery you'll get notifications for firmware updates by Google, but remember that applying those to a rooted phone might screw things up too.

the blue one is stock recovery right?

sheunghko said:
the blue one is stock recovery right?
Click to expand...
Click to collapse
Don't remember. It should only have like 3-4 options.

thanks again nxt. no i am not running an custom rom. i mean not yet. i planed to try one from the rom manager download section then my phone couldn't start after installation and now i have restored my phone from my backup using the clockwork mod recovery 3.x.x.x.

Links

Can somebody update this list with the actual links to what you saying to download? I would like to give this a try, but not sure where all these links are.
Assuming you are comfortable with the issues and concepts associated with rooting (terms like bootloader, recovery and ROM's), I suggest you do the following:
1. Go to unrevoked.com and root the Incredible; also run unrevoked-forever to secure S-OFF status.
2. Go to dougpiston.com and get the latest CWM for the phone; 3.0.0.7 if it's Amoled display (Hardware version 2) or SLCD (Hardware version 3). (BTW, note that this ROM erroneously reports Amoled Incredibles as the wrong hardware version). Flash that from hboot. Remove the file from the root directory of the SD card afterwards.
3. Download the 7.07 leaked radio; download the ROM; download the updated OTA kernel from a few days ago.
4. Flash away (I would do ROM, kernel, then radio. Remember to flash dalvik/cache before flashing a kernel; and remember that the radio is flashed in hboot.)

jamala00 said:
Can somebody update this list with the actual links to what you saying to download? I would like to give this a try, but not sure where all these links are.
Assuming you are comfortable with the issues and concepts associated with rooting (terms like bootloader, recovery and ROM's), I suggest you do the following:
1. Go to unrevoked.com and root the Incredible; also run unrevoked-forever to secure S-OFF status. unrevoked.com
2. Go to dougpiston.com and get the latest CWM for the phone; 3.0.0.7 if it's Amoled display (Hardware version 2) or SLCD (Hardware version 3). (BTW, note that this ROM erroneously reports Amoled Incredibles as the wrong hardware version). Flash that from hboot. Remove the file from the root directory of the SD card afterwards. I just ran the Unrevoked tool, and CWM 2.5.1.2 was installed. I installed ROM Manager and updated to 3.0.0.8.
3. Download the 7.07 leaked radio; download the ROM; download the updated OTA kernel from a few days ago. Link is here.
4. Flash away (I would do ROM, kernel, then radio. Remember to flash dalvik/cache before flashing a kernel; and remember that the radio is flashed in hboot.) Doug Piston's site
Click to expand...
Click to collapse
Is that what you're looking for?
EDIT: In your Step 4, when you go to Doug Piston's site for the ROM flashing tutorial, after the screen shot to "Wipe Cache Partition", I also do the following:
Mounts and Storage - format /system; format /boot; format /data
Advanced - Wipe Dalvik
Then continue on to the following screen shot on the page, with "Installing zip from SD Card".

RMarkwald said:
Is that what you're looking for?
EDIT: In your Step 4, when you go to Doug Piston's site for the ROM flashing tutorial, after the screen shot to "Wipe Cache Partition", I also do the following:
Mounts and Storage - format /system; format /boot; format /data
Advanced - Wipe Dalvik
Then continue on to the following screen shot on the page, with "Installing zip from SD Card".
Click to expand...
Click to collapse
Let me look through your links.. I have already done unrevoked and am S-OFF. I had flashed CM7 but when back to stock looking to flash that OTA that was "suppose" to come out. I'm tired of waiting and Nils ROM looks more of what I am looking for then CM7. But there just seems to be a lot more steps. I am not sure what the latest CWM means? Also not positive on which LCD screen I have.

jamala00 said:
Let me look through your links.. I have already done unrevoked and am S-OFF. I had flashed CM7 but when back to stock looking to flash that OTA that was "suppose" to come out. I'm tired of waiting and Nils ROM looks more of what I am looking for then CM7. But there just seems to be a lot more steps. I am not sure what the latest CWM means? Also not positive on which LCD screen I have.
Click to expand...
Click to collapse
CWM is ClockworkMod Recovery, which is where you go to flash/backup ROMs. You can update it by downloading the zip and putting it onto the root of your SD card, renaming it PB31IMG.zip, booting into the bootloader (phone off, hold volume down and power buttons), and installing it that way.
You can also open ROM Manager to flash a recovery too. Easier that the PB31IMG.zip way, but they both get the same thing done. If you have an SLCD screen and you have the wrong recovery, when you go into recovery the screen will be black with two white lines down the sides, from what I remember.

RMarkwald said:
CWM is ClockworkMod Recovery, which is where you go to flash/backup ROMs. You can update it by downloading the zip and putting it onto the root of your SD card, renaming it PB31IMG.zip, booting into the bootloader (phone off, hold volume down and power buttons), and installing it that way.
You can also open ROM Manager to flash a recovery too. Easier that the PB31IMG.zip way, but they both get the same thing done. If you have an SLCD screen and you have the wrong recovery, when you go into recovery the screen will be black with two white lines down the sides, from what I remember.
Click to expand...
Click to collapse
AH.... .. OK... Don't know why I didn't catch that CWM... I think I have what I need, hopefully tonight after work I can try this out. If I recall I can see what LCD I have by the model number of the phone... I'll google that quick.

Ok so from what I am reading CWM 3x is not required for flashing ROMs on the Inc... I have it installed but it is version 2.x.. Do I have to have version 3x to flash Nil's 3.0 ROM?

It's not, well not necessarily...but for the 2.1/3.0 Sense ROMs ClockworkMod Recovery does need to be at 3.x.
You can go here to download 3.0.0.8, rename it to PB31IMG.zip, put it on the root of the SD card, and with phone powered off hold down volume down + power buttons to get to HBOOT and flash it that way.
There may be a flashable zip for this somewhere to update, but doing this through HBOOT is pretty simple too.

RMarkwald said:
It's not, well not necessarily...but for the 2.1/3.0 Sense ROMs ClockworkMod Recovery does need to be at 3.x.
You can go here to download 3.0.0.8, rename it to PB31IMG.zip, put it on the root of the SD card, and with phone powered off hold down volume down + power buttons to get to HBOOT and flash it that way.
There may be a flashable zip for this somewhere to update, but doing this through HBOOT is pretty simple too.
Click to expand...
Click to collapse
thx.. but can you tell me how I know which screen I have so I do not install the wrong version? From what I am reading there is a version for AMOLED and SLCD??

Forget it.. I see it is for both 3.0.0.8.. thx...!!

jamala00 said:
thx.. but can you tell me how I know which screen I have so I do not install the wrong version? From what I am reading there is a version for AMOLED and SLCD??
Click to expand...
Click to collapse
The green text of version 2.5.1.2 will change to orange for 3.0.0.8.

Got it.. thx...!! Ok just one more question I think.. In step 3
3. Download the 7.07 leaked radio; download the ROM; download the updated OTA kernel from a few days ago. Link is here.
If I go to your link that is the link for the OTA 7.07 Radio. The ROM I know where to get, but what about the kernel? Does that link install both the radio and the kernel? and then I just need the ROM?

jamala00 said:
Got it.. thx...!! Ok just one more question I think.. In step 3
3. Download the 7.07 leaked radio; download the ROM; download the updated OTA kernel from a few days ago. Link is here.
If I go to your link that is the link for the OTA 7.07 Radio. The ROM I know where to get, but what about the kernel? Does that link install both the radio and the kernel? and then I just need the ROM?
Click to expand...
Click to collapse
If you're running a GingerSense ROM (NilsP's Ginger Business Sense is), then go here. The thread for this is here. It's a zip file, you flash in CWM like you did the ROM. Wipe Cache and Wipe Dalvik before flashing a kernel.
If you're running a Froyo 2.2 Sense ROM, you'll need a Sense kernel. An AOSP ROM needs an AOSP kernel. Kernel threads will tell you what version of Android it is compatible with. Flashing an AOSP to Sense won't work, and vice versa. I ran Tiny's Beta5 kernel with NilsP's ROM (here), and it worked great.
The radio link is only for the radio, so it only installs the radio. The kernel link/thread I am linking you to here is for only the GingerSense kernel, compatible with 2.3 GingerSense ROMs.

OK, I think I have it then. I was going to flash Nils •Nils Business GingerSense 3.0 so the link you provided for the kernel should be the one I need right? I have CWM 3.0.0.8 flashed now. I have the correct HBOOT, I also downloaded the OTA Radio, so I think I have everything I need.
One last question if you don't mind... If I use CWM to backup my current system, does it backup, (ROM, radio, and kernel) or if I wanted to go back at anytime would I have to flash the radio and kernel seperate? Have not used CWM to do backup and restore yet.

jamala00 said:
OK, I think I have it then. I was going to flash Nils •Nils Business GingerSense 3.0 so the link you provided for the kernel should be the one I need right? I have CWM 3.0.0.8 flashed now. I have the correct HBOOT, I also downloaded the OTA Radio, so I think I have everything I need.
One last question if you don't mind... If I use CWM to backup my current system, does it backup, (ROM, radio, and kernel) or if I wanted to go back at anytime would I have to flash the radio and kernel seperate? Have not used CWM to do backup and restore yet.
Click to expand...
Click to collapse
Yes, that link is the download for the kernel zip file. It'll prompt you to save it somewhere.
A ROM backup backs up the entire ROM and kernel, radio doesn't get backed up as it is completely separate from the ROM/kernel. Don't need to back up the radio. So if you needed to restore a backup, you'd do the wiping of user data and everything like you do before flashing a new ROM. Then when you go to Backup and Restore - Restore, you select your backup, and it brings it back to the point you made the backup (ROM and kernel).
So keep up to date backups, as if you have say a two month old backup that you'd restore, any texts/app info would restore to the point the two month old backup was made. Does that make sense?

Yep... thx for all the info and taking the time...

No problem! Glad to help!

just curious... do you know if the Clock App that is in the stock Android 2.2... Is that still in Nil's ROM? I had tried CM7 and it was not in there. I use that app all the time, so was just curious if it is in there. I like the Time, Alarm, Timer, Stopwatch all in the same App...

I believe it is, since the ROM uses HTC Sense. It also has the HTC Clock widget.