Please help me, I need ROM 1.11.0000 German. I can't boot to Windows Mobile, only see Logo O2 then XDA Orbit has a black screen. I only can run Boot Loader.
Thanks all.
help me, Pleae
When you get into BootLoader why don´t you flash with official HTC WM6 ROM?
I flashed Rom WM6 Ship German from HTC successful but it's only stop at O2 Logo and auto turn off screen to black. . Please help me. Thanks all.
The update was successfull?
Try a reflash?
yes, i tryed twice but can't boot to WM only stop at Logo O2 and atuo turn off. If you have ship rom German, you can help me, thanks you
You flashed your device with HTC WM6 ROM... and your Bootscreen shows the O2 Logo...
hm...so the update was not succesfull...
Have you tried the official O2 ROM?
http://www.o2online.de/nw/support/downloads/software/xda/xdaorbit/index.html
I Flashed rom from site O2 - Online German but it's only can boot to O2 Logo and auto turn off screen to black. Please, anybody can help me. (
hieupc said:
I Flashed rom from site O2 - Online German but it's only can boot to O2 Logo and auto turn off screen to black. Please, anybody can help me. (
Click to expand...
Click to collapse
just try and run USPL first then flash the Rom [NEW ROM]: Artemis Vanilla 1.0 WWE - 5.2.1908 (Build 1850)
this should solve your problems.
i only can run Boot Loader, so i can't use USPL to Unlock CID
help me, please
please help me (
hi i have one HTC p3300 with french language how can i install wondows mobile 6 english can write anyone step by step because this is the first time try to install windows mobile in smart phone ..........(and one question-HTC P3300 or Nokia N95 8GB is better) thnx......
hey
first about your question about which are better you can see this
http://my-symbian.com/s60v3/review_n95_artemis.php
and for flashing your mobile.. you have to do the following:
1. unlock your mobile by USPL [don't flash any rom without this step]
2.pick a rom you think it's the best for you
and finally while sycronizing run the update utility which are in the folder of the rom you picked.
and that's all
y_bother said:
hey
first about your question about which are better you can see this
http://my-symbian.com/s60v3/review_n95_artemis.php
and for flashing your mobile.. you have to do the following:
1. unlock your mobile by USPL [don't flash any rom without this step]
2.pick a rom you think it's the best for you
and finally while sycronizing run the update utility which are in the folder of the rom you picked.
and that's all
Click to expand...
Click to collapse
i not understand this (1. unlock your mobile by USPL [don't flash any rom without this step] can you write where to download this and how to unlock???
see this
http://forum.xda-developers.com/showthread.php?t=311403
y_bother said:
see this
http://forum.xda-developers.com/showthread.php?t=311403
Click to expand...
Click to collapse
Now i have one question is logically to unlock cid in my device because my device work with every sim card's can i only update rom without cid unlocking with uspl......my device: Ipl 3.13.0001, spl 3.13.0000, gsm 02.94.90, os .13.0.0.0 wich rom you prefer without cid unlocking...thnx.....
svchost said:
Now i have one question is logically to unlock cid in my device because my device work with every sim card's can i only update rom without cid unlocking with uspl......my device: Ipl 3.13.0001, spl 3.13.0000, gsm 02.94.90, os .13.0.0.0 wich rom you prefer without cid unlocking...thnx.....
Click to expand...
Click to collapse
you can only flash original htc rom if you don't unlock the device
cid unlocking is not sim unlocking and has nothing to do with sim or provider,it just removes some locks regarding the operating system
generally there are hard spl (uspl) and jump spl (or soft)
hard spl - cid unlocks the device permanently
jump spl - enables you to flash only one rom (for further usage you have to do the process again...but it doesn't matter right now)
only hard spl (uspl) is developed for artemis and is working like charm
i flashed few artemises many times and all works great
i found this rom http://forum.gsmhosting.com/vbb/showpost.php?p=3863781&postcount=70, can i flash with this rom without cid unlocking , my device Ipl 3.13.0001, spl 3.13.0000, gsm 02.94.90, os .13.0.0.0 , this rom 3.13.405....thnx...and this is a windows mobile 6.1 or ????
it's wm6
i'm affraid that you'll have to unlock it because unlocking is NOT required only for flashing original rom provided by htc specially for your device... in your case htc can provide you only FRE rom
so to flash WWE rom you'll have to unlock it
don't be afraid of doing that...thousands did it before you without any damage to the phone
unlocking is far better than bricking ( state where your device is unusable because of flashing other rom than the original ---bricking is in most cases reversible ,but don't play with it)
still i have to say "use at your own risk"
which flash(englissh) you prefer for my device htc p3300 wich is new version....
svchost said:
which flash(englissh) you prefer for my device htc p3300 wich is new version....
Click to expand...
Click to collapse
i used...my dad still uses artemis 4.02 rom by meschle...very good rom,has everything needed and lot of free memory...
i can't recommend any newer rom because i haven't tested any but you can always test it yourself
can you write me any link whre to download (english-rom), and tell me now i understanding good or no how to install rom??? first unlock cid with uspl and second updute rom, thnx for everything...............
can you write me any link where to download this artemis 4.02 rom by meschle (english-rom), and tell me now i understanding good or no how to install rom??? first unlock cid with uspl and second updute rom, thnx for everything...............
Hej I have some problems with my p3300
it just freezes sometimes and after half a minute or something
the display slowly becomes black
I want to install wm6 on it and hoped this might help something but
when i run the uspl and it starts running my device freezes again I think
(it gives a weird red green display) and is disconnected from my pc
I have no idea what is wrong or what I can do about it
so please help
thnx
...
forum.xda-developers.com/showthread.php?t=838044
for those of you having problems with the orbit uspl ive changed the rom update utility from the original rom for the art200 and not the p3300 for the cid and sim unlock. worked for me on windows 7
art200 uspl
http://www.woofiles.com/dl-206170-bvSkedSY-ArtemisUSPLart200.7z
might want to make this a sticky
riskyfuture
I really hope someone can help me.
I got this phone from a friend of mine, so i wanna pimp it without breaking it.
I am still not totally clear on the Hard-SPL and USPL.
I got the Elf 64/128.
original SPL: : 1.11.0000
I want to flash to Onyx WM 6.5
I read somewhere on this forum that i need to use the USPL first.
I already got the ELF USPL patched 1.19.0000SPL now ready to be installed.
Is this correct?
And can i install an Hard-SPL after that? or isnt that really necessary?
If so, does it matter wich one i use for HARD-SPL?
for example the 2.27.0000 i think it was.
I know, a lot of questions, but it would really help me out here
Thanx in advance
Hi
If you read this carefully http://forum.xda-developers.com/showthread.php?t=408637 you have to use first Uspl 1.xx then upgrade to Uspl 2.xx and then Hard Spl from here http://forum.xda-developers.com/showthread.php?t=445666.
Good luck
help this kind of strange problem......i hardspl this mobile spl 2.28 cmon and ipl 1.17.0002 and try update the rom...but same problem.....how can i repair this kind of problem....anything can guide me her....................but if i take out the simcard the phone working properly.....how can i use this with simcard....