hi friends
is there any crossbow rom that work on CID locked device ?
There is no crossbow rom for the artemis as of now,if you mean the pdaviet edition,my suggestion would be to wait,read the amount of posts of bricked devices.
Hi,
I've a new HTC Tytn from Vodafone Portugal that came with WM5 and was thinking to upgrade to WM6 with the original ROM from HTC will this be possible or this phone is locked to the Vodafone rom (CID) ? Is it possible to read the current CID?
Thk's
You need to flash the HARD-SPL bootloader regardless of your CID status... It helps prevent bricks and also CID unlocks the phone. Please use the search....
Ok SH4YD33, thanks for your answer. But without flashing the Rom, is it possible to read the CID directly from the phone?
Thanks.
Hard spl is not a OS or RADIO Flash. It is the bootloader. It will not effect anything you have saved in your phone.
if that is what you're concerned with.. I'm unaware of a way to read the CID.. Maybe Olipro can chime in on that subject..
http://forum.xda-developers.com/showthread.php?t=296722
Grab the files from there..
crisman said:
Hi,
I've a new HTC Tytn from Vodafone Portugal that came with WM5 and was thinking to upgrade to WM6 with the original ROM from HTC will this be possible or this phone is locked to the Vodafone rom (CID) ? Is it possible to read the current CID?
Thk's
Click to expand...
Click to collapse
USE MTTY. http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
TASK 32 will tell you if you're superCID or not and
INFO 2 will tell you the which CID you're locked to (if any).
hi i have one HTC p3300 with french language how can i install wondows mobile 6 english can write anyone step by step because this is the first time try to install windows mobile in smart phone ..........(and one question-HTC P3300 or Nokia N95 8GB is better) thnx......
hey
first about your question about which are better you can see this
http://my-symbian.com/s60v3/review_n95_artemis.php
and for flashing your mobile.. you have to do the following:
1. unlock your mobile by USPL [don't flash any rom without this step]
2.pick a rom you think it's the best for you
and finally while sycronizing run the update utility which are in the folder of the rom you picked.
and that's all
y_bother said:
hey
first about your question about which are better you can see this
http://my-symbian.com/s60v3/review_n95_artemis.php
and for flashing your mobile.. you have to do the following:
1. unlock your mobile by USPL [don't flash any rom without this step]
2.pick a rom you think it's the best for you
and finally while sycronizing run the update utility which are in the folder of the rom you picked.
and that's all
Click to expand...
Click to collapse
i not understand this (1. unlock your mobile by USPL [don't flash any rom without this step] can you write where to download this and how to unlock???
see this
http://forum.xda-developers.com/showthread.php?t=311403
y_bother said:
see this
http://forum.xda-developers.com/showthread.php?t=311403
Click to expand...
Click to collapse
Now i have one question is logically to unlock cid in my device because my device work with every sim card's can i only update rom without cid unlocking with uspl......my device: Ipl 3.13.0001, spl 3.13.0000, gsm 02.94.90, os .13.0.0.0 wich rom you prefer without cid unlocking...thnx.....
svchost said:
Now i have one question is logically to unlock cid in my device because my device work with every sim card's can i only update rom without cid unlocking with uspl......my device: Ipl 3.13.0001, spl 3.13.0000, gsm 02.94.90, os .13.0.0.0 wich rom you prefer without cid unlocking...thnx.....
Click to expand...
Click to collapse
you can only flash original htc rom if you don't unlock the device
cid unlocking is not sim unlocking and has nothing to do with sim or provider,it just removes some locks regarding the operating system
generally there are hard spl (uspl) and jump spl (or soft)
hard spl - cid unlocks the device permanently
jump spl - enables you to flash only one rom (for further usage you have to do the process again...but it doesn't matter right now)
only hard spl (uspl) is developed for artemis and is working like charm
i flashed few artemises many times and all works great
i found this rom http://forum.gsmhosting.com/vbb/showpost.php?p=3863781&postcount=70, can i flash with this rom without cid unlocking , my device Ipl 3.13.0001, spl 3.13.0000, gsm 02.94.90, os .13.0.0.0 , this rom 3.13.405....thnx...and this is a windows mobile 6.1 or ????
it's wm6
i'm affraid that you'll have to unlock it because unlocking is NOT required only for flashing original rom provided by htc specially for your device... in your case htc can provide you only FRE rom
so to flash WWE rom you'll have to unlock it
don't be afraid of doing that...thousands did it before you without any damage to the phone
unlocking is far better than bricking ( state where your device is unusable because of flashing other rom than the original ---bricking is in most cases reversible ,but don't play with it)
still i have to say "use at your own risk"
which flash(englissh) you prefer for my device htc p3300 wich is new version....
svchost said:
which flash(englissh) you prefer for my device htc p3300 wich is new version....
Click to expand...
Click to collapse
i used...my dad still uses artemis 4.02 rom by meschle...very good rom,has everything needed and lot of free memory...
i can't recommend any newer rom because i haven't tested any but you can always test it yourself
can you write me any link whre to download (english-rom), and tell me now i understanding good or no how to install rom??? first unlock cid with uspl and second updute rom, thnx for everything...............
can you write me any link where to download this artemis 4.02 rom by meschle (english-rom), and tell me now i understanding good or no how to install rom??? first unlock cid with uspl and second updute rom, thnx for everything...............
Hej I have some problems with my p3300
it just freezes sometimes and after half a minute or something
the display slowly becomes black
I want to install wm6 on it and hoped this might help something but
when i run the uspl and it starts running my device freezes again I think
(it gives a weird red green display) and is disconnected from my pc
I have no idea what is wrong or what I can do about it
so please help
thnx
...
forum.xda-developers.com/showthread.php?t=838044
thanks to pof for this tool
I was having problems with it on windows 7 and my xda orbit it was due to having the p3300 rom update utility so i have changed it to the arte200 rom update utility and now the error 260 dose not appear and update completes
http://www.woofiles.com/dl-206170-bvSkedSY-ArtemisUSPLart200.7z
please could you confirm if it works for you cheers
shane
http://forum.xda-developers.com/attachment.php?attachmentid=401511&d=1284549546
After trying for 4 days now , you have solved my problem thank you it works!
I really hope someone can help me.
I got this phone from a friend of mine, so i wanna pimp it without breaking it.
I am still not totally clear on the Hard-SPL and USPL.
I got the Elf 64/128.
original SPL: : 1.11.0000
I want to flash to Onyx WM 6.5
I read somewhere on this forum that i need to use the USPL first.
I already got the ELF USPL patched 1.19.0000SPL now ready to be installed.
Is this correct?
And can i install an Hard-SPL after that? or isnt that really necessary?
If so, does it matter wich one i use for HARD-SPL?
for example the 2.27.0000 i think it was.
I know, a lot of questions, but it would really help me out here
Thanx in advance
Hi
If you read this carefully http://forum.xda-developers.com/showthread.php?t=408637 you have to use first Uspl 1.xx then upgrade to Uspl 2.xx and then Hard Spl from here http://forum.xda-developers.com/showthread.php?t=445666.
Good luck