Phone Problem: incoming and outgoing call - HD2 General

Hello,
this is the problem with my HD2:
Sometimes, i can't receive the incoming calls (while on the caller-side, it seems that the phone is ringing), it doesn't appear anything; besides, in that occasions, I can't do any calls: if I try the bottom "phone" it happens anything.
I can resolve the problem after few shutdown (and taking off and replacing the battery).
It is a very annoying problem; i've tried to solve it with original Rom, hard-resetting and with new unofficial rom.
What i Could try to solve the problem?
Thank you so much!

What rom do you have installed on your device ? An original rom or custom one ? Please give us some more informations , aboit programs , or anything else installed on your device . After that maybe somebody can help you .

I've got always the Original Italian Rom.
Today i've tried the Elegancia Rom 3.0 with radio 2.10.50.08_2 and i haven't installed any other thing but... the problem has happened....

your device is new, or did you acchieved as second hand ? If it is a second hand device, it may been tested before with many custom roms, so if it that you should try to do a task 29 , and after that install an original rom from HTC site .

Related

phone hangs at incoming call

Hi Guys,
Need urgent help!!
I am using HTC Gene for around 8 months now. All of a sudden my phone got this problem of getting hanged at incoming call.
I have uninstalled all the softs (Skype, photo contacts) i have installed. But of no avail; problem still persists.
However, no problem at all with outgoing calls.
Kindly help me suggesting a way to solve this problem.
Thanks in advance.
Did you installed any dialer? Could be the problem. If yes, try to deinstall it. Try a hard-reset too.
hi dude,
thanks for the reply.
i hav never installed any dialer...however as i said uninstalled every software i have installed earlier.
tried both soft n hard reset, but of no avail.
any other possible solution for this??
Did you installed any custom rom? If yes try to install another rom. Try to change your sim chip too (could be the problem). If even this way it doesn't work, I think you'll have to send your gene to repair.
murthy_asn said:
hi dude,
thanks for the reply.
i hav never installed any dialer...however as i said uninstalled every software i have installed earlier.
tried both soft n hard reset, but of no avail.
any other possible solution for this??
Click to expand...
Click to collapse
try to upgrade your rom to another version and good luck
Hi man,
Even I am also facing the same issue. From where we can pick another rom version.
I really appreciate abt gene hang at incoming call
I really appreciate abt hang this p3400 at incoming call yes but there is a solution just change the ROM
I suggest you to change your ROM to Karanz Loadded rom is just best for you.........!!
plz read the forum carefully before upgrading ur gene with any cooked roms.......it has some risk.......
i had similar problem before but with only certain call, and i noticed that the call that tend to hang is the one with ringtone file located in sd card. after i change the location of ringtone file to main memory, no more hanging call

Phone muted after flashing

Since I HSPL and started flashing my phone will get muted automatically after making 1 call ie on my second call the other party will not be able to hear me whereas I am still able to hear the other party. However when I received calls there is no such problem ie.the other party is able to hear me and the phone is performing normally. It only happens when I make the 2nd call onwards.
After soft resets or reflash to other roms or stock rom 1.66.707.1 the same thing recur.
I have to overcome it when I make the 2nd and subsequent calls by pressing the mute icon twice. I do not have this problem with the original rom 148. when I bought the phone
Any assistance from anyone to overcome this problem will be very much appreciated
Might be a radio issue. Which one are you running now?
mazzarin said:
Might be a radio issue. Which one are you running now?
Click to expand...
Click to collapse
My original stock rom 148. with the original radio the phone had no problem.
I started having this problem with radio rom 2.06.51.07
I shall take your advise and maybe flash the radio to radio rom 2.07.50.27_2 and then see as to whether the problem still remain or is overcome..Thank You for your advise
After flashing to radio 2.07.50.27.2 it is still the same situation ie the same problem with the phone as mentioneded above
still the same auto mute issue
Recently I flashed to Miri V3.2 Build 5.2.23529 with radio 2.07.50.27_2 and the same proble existed.
I had hard reset and still had the same problem.
Any idea anyone to overcome this problem would be much appreciated....thanks
Not Rom issue
Recently I flashed Miri V7 and after flashing no issue.
However upon restoring through spb rom upgrade rstore( unticking overwriting files) the same issue recurs again. other than this issue which is personal only to me Miri rom V7 is smooth fast and snappy.
Found the solution to muting problem
Initially I thought is the radio problem
Then I thought it is the software programs problem
Next I thought it is due to the custom rom.
Finally I found the problem is due to "activating the auto recording phone" in resco audio recorder V4.62.
Deactivate it and the MUTE problem is gone

Stuck in phonecall

Hello,
I was using multiple ROMs with RADIOs 2.05 and 2.08 and everywhere was this problem - when I calling to someone and press End Call (HW or SW button), phone doesn't end calling, only button get grayed, but it is still ringing.
Please, do you know what could help? Thank you.
bluetooth?
the only time I get this is when it connects to my in car bluetooth it never disconnects the call properly any rom!
DJGurth said:
the only time I get this is when it connects to my in car bluetooth it never disconnects the call properly any rom!
Click to expand...
Click to collapse
i get that issue sometimes as well.. i found it worked ok after i made sure the in car bluetooth was automatically allowed to connect to anything it needs.. followed by a soft reset.. should only be the once though
Ok this is interesting. I had never had this problem but now I have flashed to Flashmores latest and the ROM is great and fast (and yes I did hard reset after flashing) but now I have this problem.
When I'm in a call none of the touch keys work. Cant access the keypad or anything. Really annoying.
I have to use the hard key to kill the call.
Any thoughts?
Oh and I dont have a bluetooth headset!
GG
It's independent on Bluetooth and same problem is with hardware- and software- keys (buttons).
I have the same problem...Which ROM versions do you have? mine problems started after flashing ROMs from TMOUS...so versions 1.7 to 2.10...I will revert back to older ROMs...
I think this problem was also in stock ROM about 1.42..
Hi guys,
For those problems, I advice you to do these steps in order whenever you want to flash a ROM (stock,shipped,cooked ROM). If you want the stable ROM for daily usage... just flash the shipped ROM
-Choose Clear Storage in you current ROM.
-Take out your SD card and Format it by (FAT32)
-Connect your Device to PC and do a MTTY... You can read this for more details (do it in careful way)
-Then Flash the Shipped ROM 1.66 I suggest the 1.66.405.2 WWE.
-Do not hard reset after flash... I mean let your device through the "Customization" first then just skip all setting and Reset the device. While the device is getting reboot... Do a hard reset
-Setting up all things.
Hope this help
it doesn`t work I think this problem is according to radio ROM. I will flash another...
i had this problem yesterday and have fixed it
ceratin roms are only compatible with certain radios
for example yesterday i installed SONE 2.5 and i couldnt make calls, it would freeze
i looked at the ROM requirements and i was using a radio not supported by the ROM
simply change the radio respectively to the ROM
This problem, which I'm describing, is something other. RADIO patch is okay (I think), but phone is "slow" during phonecall and phonecall cannot be hanged out..

Problem with touchscreen on my HD2

Hello all o/
I recently installed EnergyROM on HD2 in order to get some enhancements in interface, and everything works perfect, except that sometimes my HD2 blocks any kind of input, and it happens totally randomly. Left 3/4 of my touchscreen wont respond, so basically only part of screen that reponds to touch is right 1/4. I beleive this is not software problem, as it blocks exactly when I use dialer to call someone (+ blocks that happen randomlly). Phone usually unblocks by itself after 5-10 mins or after soft reset.
I have tried installing different version of NRG ROMs, tried even flashing back to original HTC rom, still same problem. So I though "it may be radio rom thats causing this?", so tried installing different versions of radio ROM aswell, but it didnt helped.
I have HSPL 2.08 and I am flashing in this order:
1. Flash with Task29
2. Flash ROM
3. Hard reset
4. Boot
Did anyone experienced similar problems, and if so, is there solution for this ?
Thanks in advance!

Onix Rom Problem on P3452

Hello everyone on XDA
I write because I need your help as myself can not find the cause of my problem or the original forum rom
I always use Onix currently Rom Realise 13 when flashing the rom and do not install anything, everything works fine
but I would like to use the M2D 2.0 and in the same forum of the Onix is a link where is the recommended manila
I do not install anything apart from M2D, do not install or use a program that normally and still gives me the error when you start the phone, it takes a lot more compared to the time of initiation of the newly installed rom
I apply a hard reset, do not install the M2D, install my normal programs, including Mobile Shell ... everything works OK for a while
in the course of a couple of days, having turned off the cel a few times and couple of starts the same startup problem
when I start talking about the error is that installing the manila or not, I always end up with boot error, when the phone does not start one and only displays a message saying k
"The device can not start just because they turn off the device incorrectly ....."
I think more than anyone knows that startup error ...
I use the rom Onix because they are the only ones that give me problems with my simcard STK service
I hope someone takes the time to give me an idea as me and I ran ...
and even restore the original rom for my P3452, reverted to the CID unlock, flash rom again realize Onix 13 and still gives me the exact same problem
please need help here ... they would appreciate much
Greetings to all

Categories

Resources