Hello everyone on XDA
I write because I need your help as myself can not find the cause of my problem or the original forum rom
I always use Onix currently Rom Realise 13 when flashing the rom and do not install anything, everything works fine
but I would like to use the M2D 2.0 and in the same forum of the Onix is a link where is the recommended manila
I do not install anything apart from M2D, do not install or use a program that normally and still gives me the error when you start the phone, it takes a lot more compared to the time of initiation of the newly installed rom
I apply a hard reset, do not install the M2D, install my normal programs, including Mobile Shell ... everything works OK for a while
in the course of a couple of days, having turned off the cel a few times and couple of starts the same startup problem
when I start talking about the error is that installing the manila or not, I always end up with boot error, when the phone does not start one and only displays a message saying k
"The device can not start just because they turn off the device incorrectly ....."
I think more than anyone knows that startup error ...
I use the rom Onix because they are the only ones that give me problems with my simcard STK service
I hope someone takes the time to give me an idea as me and I ran ...
and even restore the original rom for my P3452, reverted to the CID unlock, flash rom again realize Onix 13 and still gives me the exact same problem
please need help here ... they would appreciate much
Greetings to all
Related
i installed wm6 the other day on my spvc500 and everything went well.
the phone started, but when i gave it a restart, it just wouldnt connect to my network...
it stays in NO service state and does nothing...
i really dont know what to do...please, help me...
i'm freakin for not knowing what to do....
WM6 problem & SPVC 500
HI,
I had the same problem and I know explanations.
Problem is in software which you installed after flashing WM6 to your SPV.
When you installing software everything is working on 100% ,but after restaring mobile
phone starting very long time ,doesn't have signal and time on main screen.
You have only one option ,re-flash WM6 again ![/COLOR]
Uninstall software hasn't influence!!!
be carefully with installation new software, I don't know where is problem exactly >
Here is list of software which is working without problems on my phone:
Extreme agenda 3.02
Smart explorer 2.1.4.553
SP Task Manager 2.1.1.315
Slovo ED
Adobe reader
Don't install :
profile switcher
cele task
If you are using different software you have only one way how to find "good" and "wrong" software.
After reflashing WM6 install only one program and restart the phone if everything will be working program is OK.
But if no you have to reflash WM6 again !!!
Be careful, all your data will be lost.
I got the same problem, after installing some software i got no network anymore.
Also the menue did not respond anymore on pressing 'Start'-button
I had to flash my Amadeus again, because also a hard-reset didn't help.
Now i think i have installed all the software again and it works still well
edit: 10 minutes after i rebooted my amadeus and BANG, nothing works anymore.
Crap.
I think the problem is 'facade', a tool to show a schedule on the homescreen.
it all works now
well, i managed to solve my problem...
the thing was to flash this WM6 and now everything works jut fine...
i can finally say that i am pleased with my c500!
Before I try this Version of WM6: Do you use Facade?
I flashed my Amadeus with WM5, installed Facade, rebooted and nothing worked. After that I flashed WM 6, did not install Facade and everything is ok
I got the same problem, but after hard reset everything was ok, so reflashing WM6 was not necessary.
I've tried updates 19 through 22 so far, and still everytime after I setup everything and then do the last normal reboot/soft reset... My phone gets thrown into the safe mode reboot loop prompt, even when following the prompt and trying to boot into safe mode I still get stuck in the loop everytime... I don't know what I'm doing wrong since I'm following the steps and installing the cabs in or of 1 through 9 as they're named...
If anybody has any better ways or alternate modes of installing M2D/TF2D please tell, as I'd like to use this but keep getting stuck...
Thanks
and what phone do you have?
locked?
radio?
ROM?
the more info the more we ccan help
I've got a Mogul..
Locked... What do ya mean?
I'm not sure how do I find that out?
And WM6 Pro, it's flashed to metroPCS
it seems that we have the same problems, my nike wouldnt boot in less than a day after installation.
WM 6.0, rom 1.31.707.09, radio 1.58.16.27
it used to be fine using m2d 19b (all devices) and m2d 0.07, any suggestion?
i suggest putting a custom rom with manila 2d on it and you phone will run just fine. Heres my phone running a custom rom with manila 2d built into the rom. http://www.youtube.com/watch?v=BKSx9DRvc0M
Had the same Problem on my Herald (with custom rom).
Try to boot without a SD in slot...worked here.
Hi,
I've got 2 Hermes (HERM100 from Orange):
The first, HERM100 (alias HERMA) all is ok
The second, HERM100 (alias HERMB), i make some action on this phone :
-CID Unlock
-Hard-SPL (i try with 2.10, 2.30 and 2.60)
-Change ROM : the same as HERMA or the other WM6.1 WWE (i've already test on HERMA)
But sometimes HERMB freeze when :
-it's booting : SubSplash
-After a long call (15minutes)
-Try to install some apps
This HERMB, make ALONE a hard-reset after :
-DeviceUpdate (apps)
-Try to launch somes apps (freeze first and HR after)
Someone knows this problem and can solve it?
Install stock rom 1st then re-install the rom you are using.
If you are trying to use a BS rom then installing the stock rom should stabilize the BS install.
Cheers...
ultramag69 said:
Install stock rom 1st then re-install the rom you are using.
If you are trying to use a BS rom then installing the stock rom should stabilize the BS install.
Cheers...
Click to expand...
Click to collapse
What is BS?
When i tried to install a ROM, my HERMB have a bug at 100% (don't restart alone) i must soft-reset it.
It's Bull**** like crappy roms.
I've test to upgrade the Original ROM (Orange) and after the newest Orange ROM = No problem
But after with a 6.5 ROM, the problem is not solved...
I've downgrade SPL from 2.60.Olipro to 2.30.Olipro. It seems be better
wont boot
i got this problem after i installed a rom, my phone froze i remove the battery thingking it would solved the problem but now it wont BOOT !!!pls help
Actually Leva, its "Big Storage"... The usual method of stopping this problem is to install the stock rom, minus the radio, let it go through a setup then install the BS rom.
If you think the ROM's are bull****, you don't need to use them...
BS Roms, need to reset everytime
Hi,
My problem is solved with a downgrade of Hard-SPL to 2.30-Olipro...
I have the phone for almost an year without having any problems at all.
Approximately 1 month ago i installed a theme (from this forum) and it worked perfectly untill i decided to change it with another one (also taken from the this forum).After the restart the main screen froze and the touch flo was not active.I could only scroll the menu and acces it.
Also, i could't change the wallpaper.
After this, i tried a hard reset and apparently everything came back to normal EXCEPT: the internet connection didn't work at all no matter the settings i've made and from time to time a "dont send" error popped up. The error was : AudioManager_eng.exe.
After this, i updated my rom (from the htc official website) and had another hard reset and still NOTHING.
In fact i noticed other errors as well.When i tried to acces the mussic tab - audioManager_eng.exe error appeared, when i open wm another wm error appeared.
PS: i also had the storage card formated hopping to solve the audiomanager_eng.exe error (no result)
What should i do now? I feel like i tried everything ...
PS2: i am sorry for the possible mistakes
english is not my mother tongue. Also please try explainig a sollution in simple terms so i can understand step by step what i am supposed to do
thanks
please help....
Have you tried a hard reset to restore everything to default? Or removing theme which started all problems? When you flashed a new rom you may have added more problems, especially if you didn't follow this guide. Depending on what rom you flashed your SPL may not match causing incompatibilities. Does the screen look distorted when you start/boot up phone? Does this discolourization go away when you press power on/off? If so you have a mismatching SPL. Read and follow the dummies guide to see if this fixes some of your issues.
I didnt flash the rom.I had an upgrade .This one: http://www.htc.com/europe/SupportDownload.aspx?p_id=179&cat=2&dl_id=533
And YES, i also had not one hard reset but 4 or so.Can that harm the phone?
Hi guys
I'm a NRG rom user, com5 build and suddenly I'm experiencing the wierdest problem, which I can't solve by myself. Let me explain what happened.
I flashed the latest rom but also went back a couple of versions. I always flash with the flash util which has the task29 feature build in. What happens is that when I flash a rom, all goes well, the complete process including the XDA_UC auto install process. After that everything is okay and everything works. But when I restart the phone all processes are starting to fail loading. Strange thing is that when I remove the storage card and reboot the phone everything is back to normal again. But as soon as I boot the phone with the storage card in everythings fails. I even had white screens of death when booting with a storage card mounted. I also tried dutty's latest rom and mirri's latest, all have the same problem. This problem appeared all of a sudden, all the cabs etc worked like a charm before, so the problem doesn't lie in the cabs or the files autoinstalled during the xda_uc.
A weird solution to this problem is to flash the latest dutch official stock 1.66 rom which is available for the hd2. With that one everything works, also after a reboot. So I can't use a custom rom anymore. Could this be due to a hardware problem? And if so, how can I explain this to HTC if I want to try to send it to them for repair?
Ow and of course I tried it with several other microsd card, all having the same error, so it's not a sd card issue.
I would relock and the re-unlock your hspl and see what happens. That is indeed a weird problem (that you can't send your phone in for).
Good luck
TheWizzard2203 said:
Hi guys
I'm a NRG rom user, com5 build and suddenly I'm experiencing the wierdest problem, which I can't solve by myself. Let me explain what happened.
I flashed the latest rom but also went back a couple of versions. I always flash with the flash util which has the task29 feature build in. What happens is that when I flash a rom, all goes well, the complete process including the XDA_UC auto install process. After that everything is okay and everything works. But when I restart the phone all processes are starting to fail loading. Strange thing is that when I remove the storage card and reboot the phone everything is back to normal again. But as soon as I boot the phone with the storage card in everythings fails. I even had white screens of death when booting with a storage card mounted. I also tried dutty's latest rom and mirri's latest, all have the same problem. This problem appeared all of a sudden, all the cabs etc worked like a charm before, so the problem doesn't lie in the cabs or the files autoinstalled during the xda_uc.
A weird solution to this problem is to flash the latest dutch official stock 1.66 rom which is available for the hd2. With that one everything works, also after a reboot. So I can't use a custom rom anymore. Could this be due to a hardware problem? And if so, how can I explain this to HTC if I want to try to send it to them for repair?
Ow and of course I tried it with several other microsd card, all having the same error, so it's not a sd card issue.
Click to expand...
Click to collapse
sounds like a defective phone!!!!
Yeah, that was my idea too. I tried relocking and reunlocking it with HSPL, but that doesn't matter.
But the problem is, how do I explain this to HTC if I want to send the phone to them for repair? I can't tell them that the problem only occurs when I install a custom made rom.
Pfff okay, I found the solution. It wasn't a hardwareproblem after all. I went through a terribly long trial and error procedure but finally pinned the problem down to only one cabfile, named HD2MemTweak found in the registry tips and tricks section of the general forum of the HD2.
I'd installed the lastest official 3.14 rom and installed all the cabs I was used to. But noticed, after several reinstalls, that when I installed that specific cab and rebooted the phone, everything went wrong. So I installed it without that cabfile and allw as working fine again. Then reinstalled HSPLv3 and installed the latest NRG Cookie Classic rom, which works fine again.
So that was the problem indeed. But one thing is strange of course, is that the mentioned cabfile used to work and suddenly stopped working. Could this maybe have something to do with the fact that the latest roms were build on the new 3.14 official rom? Who knows.....