I've tried updates 19 through 22 so far, and still everytime after I setup everything and then do the last normal reboot/soft reset... My phone gets thrown into the safe mode reboot loop prompt, even when following the prompt and trying to boot into safe mode I still get stuck in the loop everytime... I don't know what I'm doing wrong since I'm following the steps and installing the cabs in or of 1 through 9 as they're named...
If anybody has any better ways or alternate modes of installing M2D/TF2D please tell, as I'd like to use this but keep getting stuck...
Thanks
and what phone do you have?
locked?
radio?
ROM?
the more info the more we ccan help
I've got a Mogul..
Locked... What do ya mean?
I'm not sure how do I find that out?
And WM6 Pro, it's flashed to metroPCS
it seems that we have the same problems, my nike wouldnt boot in less than a day after installation.
WM 6.0, rom 1.31.707.09, radio 1.58.16.27
it used to be fine using m2d 19b (all devices) and m2d 0.07, any suggestion?
i suggest putting a custom rom with manila 2d on it and you phone will run just fine. Heres my phone running a custom rom with manila 2d built into the rom. http://www.youtube.com/watch?v=BKSx9DRvc0M
Had the same Problem on my Herald (with custom rom).
Try to boot without a SD in slot...worked here.
Related
Hi,
I've got 2 Hermes (HERM100 from Orange):
The first, HERM100 (alias HERMA) all is ok
The second, HERM100 (alias HERMB), i make some action on this phone :
-CID Unlock
-Hard-SPL (i try with 2.10, 2.30 and 2.60)
-Change ROM : the same as HERMA or the other WM6.1 WWE (i've already test on HERMA)
But sometimes HERMB freeze when :
-it's booting : SubSplash
-After a long call (15minutes)
-Try to install some apps
This HERMB, make ALONE a hard-reset after :
-DeviceUpdate (apps)
-Try to launch somes apps (freeze first and HR after)
Someone knows this problem and can solve it?
Install stock rom 1st then re-install the rom you are using.
If you are trying to use a BS rom then installing the stock rom should stabilize the BS install.
Cheers...
ultramag69 said:
Install stock rom 1st then re-install the rom you are using.
If you are trying to use a BS rom then installing the stock rom should stabilize the BS install.
Cheers...
Click to expand...
Click to collapse
What is BS?
When i tried to install a ROM, my HERMB have a bug at 100% (don't restart alone) i must soft-reset it.
It's Bull**** like crappy roms.
I've test to upgrade the Original ROM (Orange) and after the newest Orange ROM = No problem
But after with a 6.5 ROM, the problem is not solved...
I've downgrade SPL from 2.60.Olipro to 2.30.Olipro. It seems be better
wont boot
i got this problem after i installed a rom, my phone froze i remove the battery thingking it would solved the problem but now it wont BOOT !!!pls help
Actually Leva, its "Big Storage"... The usual method of stopping this problem is to install the stock rom, minus the radio, let it go through a setup then install the BS rom.
If you think the ROM's are bull****, you don't need to use them...
BS Roms, need to reset everytime
Hi,
My problem is solved with a downgrade of Hard-SPL to 2.30-Olipro...
hey guys, just wanted to ask if somebody has experienced something similar..
i had jacxhero running on my 32a without problems. tonight i had the phone on the charger, and in the morning it turns off everytime after the first splash screen. i can access the bootloader mode etc normally, just loaded cyans rom and it works. but...why this sudden inusability? i havent added any program or changed settings for the last 2 days or something...
I had the same problem but with a different ROM. It was the TIM ROM which can be found in the Sapphire Android Developement section here at Xda-Dev. I'm not quite sure if it's a nandroid backup or if it's an Update.zip, but as I had it installed it seemed to be the exact same ROM my device has been shipped with and it read the same numbers in the About-System dialog thingie and so on, it was like if it was the shipping ROM.
Always after about a day of usage or so it suddenly froze though, then the device reset itself and then endlessly looped at the bootscreen. Very annoying. It didnt happen with any other ROM since then...
Mineee..
That's weird..
But, you had any data connection?.. maybe it tried to update something!
Mine started rebooting after entering on suspend mode(not on the splash screen)! The program settings from the overclock just was pulled after I run out of battery (with the "forced" reboot) and started making conflict with the specs of the myhero rom.
Whats the developmental aspect of this thread??
None.........so please post in General.
Warning given.
seems like i got more problems since this "crash"
after reflashing to cyan after this startup error and then reflashing jacheroski 1.4, im able to load hero roms like jacheroski 1.4 on my magic and they work fine, but im not able anymore to load any roms without hero kernel it seems..
i tried with several roms like different versions (working before versions!!) of cyanmod, hofo,..they all loop at the last splash screen or stay black when it should come to the actual os(one step after the last splash).
am i "doomed" to stick to hero roms forever?^^
im using eng spl .2005...should i try to reflash something? or have you guys got any other ideas?
Can anyone tell me if this will wipe any updates etc that have been done to the phone by the phone company?
my phone forgot the lock code so i had to do a hard reset, since then the phone has been freezing quite often, mainly when sending/recieving texts if you change the orientation while typing.
at the moment its either wait 2 minutes for it to sort itself out or just restart sense which is now becoming annoying.
any help appreciated
it also wont play the h.264 recordings i have made on the phone, i just get a black screen that says loading :/
well i have figured out it is definately related to the orientaion of the phone, i cannot turn the phone on its side when sending texts or using the web browsers or it will just lock up or slow to a crawl.
p.s. somone just please reply so i know i aint getting ignored cos my posts seem to be lol
Hmmmm...
Is the issue only occuring since you performed the hard reset and not before?
Have you tried reinstalling any updates you had before the reset?
Do you have a lot of msg's in your inbox?
updates are usually stored in root of phone
have you installed any new cabs or roms ??
if you've not installed anything new another hard reset may be in order just to re-syncronize phone
only help I can give at mo
spookywillow said:
Can anyone tell me if this will wipe any updates etc that have been done to the phone by the phone company?
my phone forgot the lock code so i had to do a hard reset, since then the phone has been freezing quite often, mainly when sending/recieving texts if you change the orientation while typing.
at the moment its either wait 2 minutes for it to sort itself out or just restart sense which is now becoming annoying.
any help appreciated
Click to expand...
Click to collapse
Yeah it will. it is like doing a windows system restore using the restore discs that came with your pc. Personally i would look at updating to a newer rom if you haven't already got a 1.66 or 1.72 based stock rom. You could always look at a custom rom. I use energy 23569 and i haven't had any problems with it. Also the energy roms include a newer version of sense that is included with the new TMOUS roms and it appears to be less buggy
thanks for the replies guys,
it was fine before the reset but it did slow a little in landscape mode but nothing anywhere near what its like now, key presses had a slight delay and now they are like a 5 second delay....portrait mode is perfect.
i always delete messages so my inbox is empty, i never applied any updates prior to the reset, i assumed virgin did it all for me.
i have only installed a few tweaks but the main change is bsb tweaks, i'm now using the latest version where as i was using the prior version before the hard reset but this has only started happening about a week after i installed it.
rom version is 1.66.351.1 (76641) WWE
rom date 03/03/10
manilla version 2.5.19211619.0
OS version 5.2.21869
radio version 2.07.51.22_2
i want to use a custom rom or atleast update to newer one but how will i put it back to the stock rom? the phone has some locked items from virgin installed, they will know if those are not there.
No they won't. Just say you removed them by hand because they were of no purpose to you.
If you install a custom rom on your unbranded, unlocked (the phone virgin supplied you is exactly the same as what you would pay for standalone except for the software extras) Leo it will be easy to install a stock rom. just flash it and then remove HSPL3 in favour of the stock spl (1.42 i think).
Your manilla/sense version is actually very old. There are newer versions about (2015 and 2016) that have been developed for the TMOUS devices but as HTC neglect the UK we haven;t been given the officially yet but most of the new custom roms include them.
If you do stay stock try installing LeoCPUSpeed V4 and chainfire's 3D Driver Patch V2. They will improve the speed of the phone in general and you may find the typing lag goes away completely
Hi guys
I'm a NRG rom user, com5 build and suddenly I'm experiencing the wierdest problem, which I can't solve by myself. Let me explain what happened.
I flashed the latest rom but also went back a couple of versions. I always flash with the flash util which has the task29 feature build in. What happens is that when I flash a rom, all goes well, the complete process including the XDA_UC auto install process. After that everything is okay and everything works. But when I restart the phone all processes are starting to fail loading. Strange thing is that when I remove the storage card and reboot the phone everything is back to normal again. But as soon as I boot the phone with the storage card in everythings fails. I even had white screens of death when booting with a storage card mounted. I also tried dutty's latest rom and mirri's latest, all have the same problem. This problem appeared all of a sudden, all the cabs etc worked like a charm before, so the problem doesn't lie in the cabs or the files autoinstalled during the xda_uc.
A weird solution to this problem is to flash the latest dutch official stock 1.66 rom which is available for the hd2. With that one everything works, also after a reboot. So I can't use a custom rom anymore. Could this be due to a hardware problem? And if so, how can I explain this to HTC if I want to try to send it to them for repair?
Ow and of course I tried it with several other microsd card, all having the same error, so it's not a sd card issue.
I would relock and the re-unlock your hspl and see what happens. That is indeed a weird problem (that you can't send your phone in for).
Good luck
TheWizzard2203 said:
Hi guys
I'm a NRG rom user, com5 build and suddenly I'm experiencing the wierdest problem, which I can't solve by myself. Let me explain what happened.
I flashed the latest rom but also went back a couple of versions. I always flash with the flash util which has the task29 feature build in. What happens is that when I flash a rom, all goes well, the complete process including the XDA_UC auto install process. After that everything is okay and everything works. But when I restart the phone all processes are starting to fail loading. Strange thing is that when I remove the storage card and reboot the phone everything is back to normal again. But as soon as I boot the phone with the storage card in everythings fails. I even had white screens of death when booting with a storage card mounted. I also tried dutty's latest rom and mirri's latest, all have the same problem. This problem appeared all of a sudden, all the cabs etc worked like a charm before, so the problem doesn't lie in the cabs or the files autoinstalled during the xda_uc.
A weird solution to this problem is to flash the latest dutch official stock 1.66 rom which is available for the hd2. With that one everything works, also after a reboot. So I can't use a custom rom anymore. Could this be due to a hardware problem? And if so, how can I explain this to HTC if I want to try to send it to them for repair?
Ow and of course I tried it with several other microsd card, all having the same error, so it's not a sd card issue.
Click to expand...
Click to collapse
sounds like a defective phone!!!!
Yeah, that was my idea too. I tried relocking and reunlocking it with HSPL, but that doesn't matter.
But the problem is, how do I explain this to HTC if I want to send the phone to them for repair? I can't tell them that the problem only occurs when I install a custom made rom.
Pfff okay, I found the solution. It wasn't a hardwareproblem after all. I went through a terribly long trial and error procedure but finally pinned the problem down to only one cabfile, named HD2MemTweak found in the registry tips and tricks section of the general forum of the HD2.
I'd installed the lastest official 3.14 rom and installed all the cabs I was used to. But noticed, after several reinstalls, that when I installed that specific cab and rebooted the phone, everything went wrong. So I installed it without that cabfile and allw as working fine again. Then reinstalled HSPLv3 and installed the latest NRG Cookie Classic rom, which works fine again.
So that was the problem indeed. But one thing is strange of course, is that the mentioned cabfile used to work and suddenly stopped working. Could this maybe have something to do with the fact that the latest roms were build on the new 3.14 official rom? Who knows.....
Hello everyone on XDA
I write because I need your help as myself can not find the cause of my problem or the original forum rom
I always use Onix currently Rom Realise 13 when flashing the rom and do not install anything, everything works fine
but I would like to use the M2D 2.0 and in the same forum of the Onix is a link where is the recommended manila
I do not install anything apart from M2D, do not install or use a program that normally and still gives me the error when you start the phone, it takes a lot more compared to the time of initiation of the newly installed rom
I apply a hard reset, do not install the M2D, install my normal programs, including Mobile Shell ... everything works OK for a while
in the course of a couple of days, having turned off the cel a few times and couple of starts the same startup problem
when I start talking about the error is that installing the manila or not, I always end up with boot error, when the phone does not start one and only displays a message saying k
"The device can not start just because they turn off the device incorrectly ....."
I think more than anyone knows that startup error ...
I use the rom Onix because they are the only ones that give me problems with my simcard STK service
I hope someone takes the time to give me an idea as me and I ran ...
and even restore the original rom for my P3452, reverted to the CID unlock, flash rom again realize Onix 13 and still gives me the exact same problem
please need help here ... they would appreciate much
Greetings to all