In fact, I still have the problem on connecting the bluetooth headset, even I am using the lastest build which is shubCraft 1.5. However, I have found an another temporary solution out before the better driver for bluetooth come out. At this moment, Please unpair the bluetooth headset, then turn the bluetooth off before swiching the phone off. And repair the bluetooth headset every time when the phone boot. If you do that, I think the bluetooth headset would be operated properly. Hopefully, the way can be useful for anyone who has problem with the bluetooth headset.
worked for me...but with hyperdorid build
worked for me...but with hyperdorid build
thanks
dude, shubcraft has a thread already. post in his thread instead of opening a new one.
Related
hi ppl
i use an austrian mda2 w/ ROM 1.6.00GER and ExtROM 1.60.07 together with a parrot ck3000 handsfree in my car.
i use the original bt stack w/o ANY changes.
making calls and taking calls is no problem at all and works most of the times.
the problem is as follows: when i enter the car, bt turned on, and also profile says "BT Headset ist eingeschaltet (means bt headset is turned ON)", and the n i want to place a call, the call is not routed over the handsfree. explanation is simple: when i change back to "today" - bt is turned OFF !!!
so my conclusion: everytime bt is used for the first time after disconnetion from the handsfree, it just turns OFF when it should connect. after i turn bt on by hand again it works w/o any problem. ('till i come back to the car of course - and everything starts again)
this is very annoying....
so has anyone any hint what to do? i wouldn't really mind updating to an english rom - if i just knew that that does work.
thanks,
servus ize|man
when i use this one
http://bluetooth.i-networx.de/index_e.html
my device turn bluetooth on when i call even though i dont have a bluetooth headset maybe it'll help you
thanks rudegar
i know that stack by TOWA. unfortunately that does not work at all here
i'd love to use it, but w/ this stack my handsfree is reconized sometimes, sometimes i have to pair the devices every time i start my car, and i can NEVER place calls with the combination mda2 with networx bt manager installed.
maybe someone has the same experiences and can report them
servus ize|man
Hey guys,
I just upgraded to radio stack 1.21. I still have bluetooth problems.
I've been reading up on this forums, and it seems that people all over are complaining about the bluetooth stack.
Basically, i can only get the 'connectected headset' icon, if i pair the headset again (removing it from the devices list).
It seems rediculous that it won't reconnect as soon as I turn on my bluetrek!
Is there someone with some experience that knows the proper procedure to connect easily??
Many thanks!
funny but I seem to have a similar problem only I am using Rom Version 1.01.00 wwe - radio version 1.00.10
Pairing my BT headset works perfect, the BT headset works great, all is fine until at some point - usually after a soft reset - the BT icon disappears and does not come back even if I click on the connect button on my BT headset.
The only way to bring my BT headset to life with the MDA is to delete the headset from the BT menu and rediscover it and repair it...
This of course is extremely annoying.
Anyone? any solution?
So... I've been very hesitant to post this here.
I originally updated to the Haykuro sapphire port some two weeks ago; I have since then tried the "Dude" mod, and the JF ADP 1.5 mod as well.
They all have exactly this same problem: My Lubix LC1 stereo bluetooth headset no longer works properly with the G1. The phone //says// it is connected with both the A2DP (music) and the HSP (phone) protocols; and the A2DP connection works perfectly. But the HSP connection is essentially non-existent, despite the phone saying it is connected under "Bluetooth Settings".
When I try to call someone w/ the phone, the audio is routed to and from the phone itself. There is no way to route the call to the bluetooth headset at all. This problem has persisted through all three versions; I have flashed and re-flashed, etc.
I have gone through two LC1 bluetooth headsets (a mishap with a rather large, rather bored dog.) They both behave in exactly this same way.
The bluetooth is working w/ my wife's Jabra 855 headset. And it worked perfectly fine in the 1.1 and 1.0 firmwares.
So... what's the deal? I'm not enough of a "computer-person" to know how to hack this myself, but if there were a way to port the 1.1 firmware's bluetooth profile to the 1.5 software, that would be awesome.
Much as it's nice to listen to music through the G1, that's not useful at the expense of the headset.
Is my only choice, if I want the 1.5/cupcake firmware, to //REALLY// purchase a new bluetooth headset thanks to the reversion/breaking caused by the Cupcake update itself?
Please help!
each new major upgrade version also comes with a matching radio firmware.
you only upgraded the system image - leaving the device unsynced with the radio image. Its a known issue. once you will upgrade your radio image most of your problem will go away.
radio image for Cupcake 1.5 can be downloaded from official HTC website.
No, I updated the radio. It had no effect on this problem whatsoever. I've done a clean downgrade/upgrade with each of the various 1.5 mods.
This is a problem with the 1.5 software. Even w/ the 1.5's radio and the JF 1.42 mod the LC1 worked perfectly.
No Devices Found
I have the most recent firmware, baseband, etc, but when I search for devices, it never finds any Bluetooth Devices.
Silly question -- but have you been putting those devices into pairing mode?
I am having the same exact problem with my BlueAnt V1 bluetooth headset. With the latest 1.5 builds across the board with the exception of the UK version that released a week ago I cannot use my bluetooth headset at all. It goes through the pairing as normal and shows connected (I even get the jazzy blue outline in the dial screen) but no audio to the headset what so ever same with my Car kit. What changed in the latest builds to the bluetooth profile?
you are not alone, same problem here with German G1 and Cupcake. It does pair with my navigation system and/or Motorola HF800. My navigation system can access the phone, read phone book and dial - but I do have no sound. Incoming calls do ring on the navigation system/headset, but if I pick up the call there is no audio connection. Any idea what to do?
Actually I consider to root and flash e.g. JF firmware hoping that this will bring any change. On the other site I am afraid that this is just waste of time and risk. Strange thing is that there are obvioulsy not many people with same problem, though they do exist and report same problem in various forums.
I have the same exact problem as well. My car radio has bluetooth HSP and A2DP. The A2DP works perfectly but when I dial a call, the HSP doesn't work. However, when I receive a call, it works. Also, I discovered if I disconnect the A2DP profile in the bluetooth settings on the phone, HSP works correctly.
opposite problem- HSP good but A2DP no good
I have the opposite problem as testing567. Phone shows it is paired for voice and media and so does my car (2009 Mazda6). AFAIK when I select AUX on my stereo; it should automatically start the music player on the phone, but it doesn't. When I manually open Music and play a song; it does not output on the phone's speaker nor the car stereo. Weird thing is that when the song is playing; the progress bar shows it playing very fast like it is skipping every 2-3 seconds. As soon as I turn the car off and the bluetooth disconnects; the song automatically resumes playing through the phone's speaker at a normal speed. I do not have another bluetooth audio device to test this with, so I am not sure if it is the car or the phone. No problems with bluetooth phonecalls. My cupcake is the official OTA release and as far as I can tell the radio is up to date (Baseband Version 62.50S.20.17H_2.2219.26I).
Im having the same problems, my bluetooth is paired and when i get a call my bluetooth rings, if i press it once to answer it goes straight to the phone, but if i press it twice i get the audio on my bluetooth. It sucks that you have to press twice just to be able to use your bluetooth. (Try it. Pair your Bluetooth, call yourself with another phone, and answer it by pressing twice on your bluetooth answer button.)
I had the same issue exactly as you describe.
I downloaded the 1.5 Radio version off HTC's website and everything works again
HTH
Smiffy.
Lordsmiff said:
I had the same issue exactly as you describe.
I downloaded the 1.5 Radio version off HTC's website and everything works again
HTH
Smiffy.
Click to expand...
Click to collapse
what's your radio (baseband) version?
mine is Baseband Version 62.50S.20.17H_2.22.19.26I and it takes 5-10 minutes for my already-paired parrot evo 3k to connect when my car turns on.
Hey, is anyone using the bluetooth headset Jabra BT8040, When I first bought the headset, I had no problems using it. But I've noticed a few months ago, that whenever I use the device, the person I'm calling wont be able to hear me but I can hear them. Anyone have any ideas to solve this problem?
Similar problems
I've got the same earpiece and I've had some problems with it, including: unable to pair (or saying it's paired when it really isn't), unable to connect the BT on a call, and sometimes the earpiece will just disconnect from the phone (but the call will still remain active).
That last one is the closest I've come to your issue. I usually have to put the phone in discovery mode (and the earpiece) and try repairing them from scratch.
I've heard from others with this earpiece that they haven't had problems, but I don't know anyone who has this earpiece and the Raphael. Also, I've got the Motorola S9 bt headphones and I haven't had any problems with them. So, I'm not 100% it's the earpiece but then again it could be.
i have this jabra for about 6 months and had no problem at all with Raphael!
Changed ROM
I've just changed the ROM on my phone (as in signature line) so that may change things for me with the Jabra BT.
BPB21 said:
I've just changed the ROM...
Click to expand...
Click to collapse
Please post your results with your new ROM...David.
Updated ROM & BT
Black C5 said:
Please post your results with your new ROM...David.
Click to expand...
Click to collapse
I'm using the updated ROM and radio in my signature line with the Jabra BT8060 (wasn't it? whatever the one we were talking about in this post is) as well as a Motorola S9 and I pair it with my laptop for internet access that way. So far I have not had the same troubles with the Jabra BT as I used to. It could be due to updated drivers for the BT or the fact that I'm not using TF3D (just the new WM6.5 interface).
Either way, I'm having good results so far.
I spoke too soon on BT...
I've spoken too soon on BT. I was trying to get my Motorola S9 working so I could listen to music from my phone. No luck at all - it shows the S9 connected for both the calls and the the music, but it only works on calls and the music plays on the device with the speaker. And it was working just fine this morning. Bluetooth in general is so frustrating to me that I would literally remove it from every costom ROM I use EXCEPT for "Internet Sharing" (on an Acer laptop and netbook) over bluetooth and activesync with a PC. Not just with this phone, but seriously, with BT 2.0 it should work A LOT BETTER than it does.
I have similar issues with several different Moto H700's. I can hear them but they can not hear me. Possibly the BT drivers from HTC need a fix????
Hello.
I have just bought a Dell Streak in Dubai. It was android 2.1 and I was able to immediately update it to 2.2. It works beautifully, is fast and does everything I throw at it and more.
Problem:
Bluetooth audio simply does not work. I have tried pairing it with my car kit, a nokia headset, a jabra headset and a generic bluetooth headset. It pairs fine with the headsets and phone calls seem to go to the headset but there is no audio in the headset. The person on the other side also cannot hear anything. And after i press the bluetooth button during the call to bring the call back to the phone, the headset(or car kit) seems "locked" and only gets free when I switch off bluetooth on the streak.
Bluetooth file transfer works fine and I have tested it with a samsung galaxy s. But it doesnt work for phone calls. It is a major problem as it is difficult to use the device without the bluetooth on a regular basis and especially in the car.
I would appreciate any help in this matter as I love the device but as I spend considerable amount of my time driving, it is getting very annoying.
I had originally posted this on the Dell support forum and I was recommended to post it in the XDA forum.
Thanks
Babar Malik
I use my dell streak with my motorola s10 bt headset and my car bt handsfree system and have no issues at all.
Maybe try un-pairing all devices and repairing them and testing then one at a time and see is that helps. Askari when a device is connected go to settings, wireless, bluetooth and see if you can tap and hold on the connected bt item and see if you can adjust its settings.
Sent from my Dell Streak using XDA App
Thanks for the assist but i tried unpairing and pairing but it did not work. Not too many options in the menus to change so I am pretty much stuck here.
As I have updated to android 2.2 from 2.1 which came with the phone, would a factory reset send the system back to 2.1 and then i can check whether bluetooth works or not? I mean, I cant think of anything else to do.
Is it possible that something i have downloaded or installed on the sd card is causing audio conflict with the bluetooth audio?
Thanks