1.5/Cupcake HSP (Phone) Bluetooth Problem -- any suggestions? - G1 General

So... I've been very hesitant to post this here.
I originally updated to the Haykuro sapphire port some two weeks ago; I have since then tried the "Dude" mod, and the JF ADP 1.5 mod as well.
They all have exactly this same problem: My Lubix LC1 stereo bluetooth headset no longer works properly with the G1. The phone //says// it is connected with both the A2DP (music) and the HSP (phone) protocols; and the A2DP connection works perfectly. But the HSP connection is essentially non-existent, despite the phone saying it is connected under "Bluetooth Settings".
When I try to call someone w/ the phone, the audio is routed to and from the phone itself. There is no way to route the call to the bluetooth headset at all. This problem has persisted through all three versions; I have flashed and re-flashed, etc.
I have gone through two LC1 bluetooth headsets (a mishap with a rather large, rather bored dog.) They both behave in exactly this same way.
The bluetooth is working w/ my wife's Jabra 855 headset. And it worked perfectly fine in the 1.1 and 1.0 firmwares.
So... what's the deal? I'm not enough of a "computer-person" to know how to hack this myself, but if there were a way to port the 1.1 firmware's bluetooth profile to the 1.5 software, that would be awesome.
Much as it's nice to listen to music through the G1, that's not useful at the expense of the headset.
Is my only choice, if I want the 1.5/cupcake firmware, to //REALLY// purchase a new bluetooth headset thanks to the reversion/breaking caused by the Cupcake update itself?
Please help!

each new major upgrade version also comes with a matching radio firmware.
you only upgraded the system image - leaving the device unsynced with the radio image. Its a known issue. once you will upgrade your radio image most of your problem will go away.
radio image for Cupcake 1.5 can be downloaded from official HTC website.

No, I updated the radio. It had no effect on this problem whatsoever. I've done a clean downgrade/upgrade with each of the various 1.5 mods.
This is a problem with the 1.5 software. Even w/ the 1.5's radio and the JF 1.42 mod the LC1 worked perfectly.

No Devices Found
I have the most recent firmware, baseband, etc, but when I search for devices, it never finds any Bluetooth Devices.

Silly question -- but have you been putting those devices into pairing mode?

I am having the same exact problem with my BlueAnt V1 bluetooth headset. With the latest 1.5 builds across the board with the exception of the UK version that released a week ago I cannot use my bluetooth headset at all. It goes through the pairing as normal and shows connected (I even get the jazzy blue outline in the dial screen) but no audio to the headset what so ever same with my Car kit. What changed in the latest builds to the bluetooth profile?

you are not alone, same problem here with German G1 and Cupcake. It does pair with my navigation system and/or Motorola HF800. My navigation system can access the phone, read phone book and dial - but I do have no sound. Incoming calls do ring on the navigation system/headset, but if I pick up the call there is no audio connection. Any idea what to do?
Actually I consider to root and flash e.g. JF firmware hoping that this will bring any change. On the other site I am afraid that this is just waste of time and risk. Strange thing is that there are obvioulsy not many people with same problem, though they do exist and report same problem in various forums.

I have the same exact problem as well. My car radio has bluetooth HSP and A2DP. The A2DP works perfectly but when I dial a call, the HSP doesn't work. However, when I receive a call, it works. Also, I discovered if I disconnect the A2DP profile in the bluetooth settings on the phone, HSP works correctly.

opposite problem- HSP good but A2DP no good
I have the opposite problem as testing567. Phone shows it is paired for voice and media and so does my car (2009 Mazda6). AFAIK when I select AUX on my stereo; it should automatically start the music player on the phone, but it doesn't. When I manually open Music and play a song; it does not output on the phone's speaker nor the car stereo. Weird thing is that when the song is playing; the progress bar shows it playing very fast like it is skipping every 2-3 seconds. As soon as I turn the car off and the bluetooth disconnects; the song automatically resumes playing through the phone's speaker at a normal speed. I do not have another bluetooth audio device to test this with, so I am not sure if it is the car or the phone. No problems with bluetooth phonecalls. My cupcake is the official OTA release and as far as I can tell the radio is up to date (Baseband Version 62.50S.20.17H_2.2219.26I).

Im having the same problems, my bluetooth is paired and when i get a call my bluetooth rings, if i press it once to answer it goes straight to the phone, but if i press it twice i get the audio on my bluetooth. It sucks that you have to press twice just to be able to use your bluetooth. (Try it. Pair your Bluetooth, call yourself with another phone, and answer it by pressing twice on your bluetooth answer button.)

I had the same issue exactly as you describe.
I downloaded the 1.5 Radio version off HTC's website and everything works again
HTH
Smiffy.

Lordsmiff said:
I had the same issue exactly as you describe.
I downloaded the 1.5 Radio version off HTC's website and everything works again
HTH
Smiffy.
Click to expand...
Click to collapse
what's your radio (baseband) version?
mine is Baseband Version 62.50S.20.17H_2.22.19.26I and it takes 5-10 minutes for my already-paired parrot evo 3k to connect when my car turns on.

Related

Bluetooth car module not passing through calls

Just got a bluetooth module for my car's hand's free kit and while I can pair with it ok and use it to dial out and pick up calls, once the call connects it doesn't pass through the voice - it still comes out of the phone (XDA Exec). I've been through all the bluetooth settings and double-checked it's set up as a hands-free adapter, but I'm still getting nowhere.
Anyone got any clues before I bin this increasingly poor excuse for a phone and get something that works?
If you decide to "bin" your phone for cheap, let me know.
I have exactly the same problem with my exec and a Parrot bluetooth handsfree system. It worked perfectly well before I upgraded my phone to the latest ROM (1.30.107).
According to Parrot, I need to upgrade the ROM on my handsfree adapter. This is apparently an issue with Windows Mobile 5. You may need to do the same thing.
I haven't upgraded my Parrot system yet so can't comment if the update truely fixes the problem, but I was working perfectly before upgrading the ROM on my phone.
Ah nuts...
The bluetooth module for my hands-free kit has only just been released, so I can't see any ROM updates being available soon. Even then it will almost certainly require an expensive visit to the (probably clueless) dealers.

Bluetooth Problem with Handsfree Profile in Car

Hey Folks,
I have been reading some posts here about BT and/or BT Mute problems, but my issues seems to be a bit different, plust I didn't have it 1-2 Months ago, so I think it might be ROM/Radio upgrade related ...
Right now I am running udK Diamond R8 which works perfectly fine in general.
I got my phone hooked up via BT to my car BT handsfree (it's a Peugeot 207cc which uses some Parrot BT stuff I think). This used to work perfectly fine when I first started using the polaris in the car. I don't remember when the problem started to appear, but now, when I receive and accept an incoming call, it takes 4-5 seconds, till the polaris switches audio to handsfree, meaning after accepting the call, I can't hear the other party on my car speakers ... but I can hear sound from the regular polaris speaker, very quietly of course.
After those 4-5 seconds, everything is fine and the call is switched to the car handsfree set.
The BT connection to the car set is fine all the time ... no problems connecting or pairing.
Anyone experiencing similiar issues?
boba
Hi,
I have exactly the same problem with my C4 BT handsfree system (Parrot BT components) for some months ago. I have had a look at a lot of forum, but no answer and no solution.
Some days ago, I flash my HTC Polariswith the original WM6.1 Fre, but no improvement. I still have the same problem, 4/5 seconds before hearing the caller.
(PS : sorry for my poor english )
Bemi
Same for me, it worked fine before with the original ROM
ROM : 1.25.406.1 FRE dated 12/12/07
Radio : 1.58.21.23
Protocole : 25.65.30.04H
It happened suddenly.
I tryed a lot of modifications in the register, but no improvement.
I hoped to resolv this problem with the new original WM6.1 but no improvement.
Next week, Citroen will change the radio (it stops working many time a day).
I hope this will resolv the problem.
Bemi
I don't know excatelly the model, but it's the one with Bi-Tuner, BT, MP3 and without Navidrive.
Bemi
Same for me "and without Navidrive"
Probably the RD4
Bemi
Today, I tried several other mobiles (Samsung, Sony-Ericson, Eten, Alcatel) for my problem of delay with incoming calls.
All of them work properly and, as soon as I receive and accept an incoming call, the sound switches directly to the handsfree of the car.
So, what is the problem with my HTC Cruise ?
Any idea ?
Bemi
i'm having the same problem with a Sony DR-BT20NX headset
It has been working earlier.
But now , on incoming calls , the phone ring and later i ear a little signal in the bluetooth headset.
To accept the call , i've to use phone buttons ) .
The sound comes out the phone .I've to speak in the phone.
Otherwise i can listen music with the BT headset and make outgoing calls.
Rom : M-Amine 2.FRE
Radio : 1.59.42.15
( same problems with PDA viet Rom's V33 à V35 )
I don't remember if i've the problem since i've upgraded to radio 1.59.42.15 , sorry
Never had answers on differents forums ..
BT Joined Stereo
install advance config tool v3.3
go to BT setting
verify that your option is Joined stereo and not mono
I'm using udK Diamond R8. I had a lot of problems with my Parrot ck3100 carkit. It was finally resolved by installing the Murata 1.58.21.23 radio. With the for R8 recommended radio I had bad GSM reception, BT connection failure, random BT mute, Parrot displaying the call would continue when I in fact hang up etc.
Hi,
No change with Advanced Config Tools V3.3
Bemi
I have a different BT problem.
i am currently running Touch-IT m2d Beta. but i have always had this problem, even on the original official rom.
i pair my phone with a JVC KD-BT1 CD Head Unit in the car.
i sent this to HTC support (before i started flashing new roms to my cruise):
------------
HTC Touch Cruise. rom: 1.26.710.1 wwe radio: 1.58.21.23 protocol: 25.65.30.04h. bluetooth problem. when i have BT enabled on the htc, i get in the car and it pairs with my audio system. after i make the first call it disconnects (stops pairing) after the call is finished and then after 60 seconds, it pairs up again and i can make a call again. this happens after every call. i had a nokia and i-mate jasjam before with no problems whatsoever. any patch or update available?
------------
AND THIS WAS THEIR REPLY:
-------------
Bluetooth should be universal or is marketed as universal although it is far from the truth. Certain chipsets conflict or are incompatible with others. If a device is not fully compatible it will not offer all features or possibly not connect at all. I have included the below for current tested devices.
-------------
I DON'T think this is going to be fixed any time soon, so i'll live with it!
Hi every body.
I've got the same problem.
A Cruise Rev B, and a BT car's Kit (included in a peugeot, I thing a RD4/parrot stuff)
Actually my first call is ok, and then, heads phones are cutted (sometimes after 3 or 4 seconds), but my microphone still works.
My car's BT is still paired, and sometimes indicates that I'm still phoning, even if I've cutted it on my phone.
I'm happy to find some user's in the same "panade" than me, but I hope we will find a solution...
Who knows how it works and communicate?
It has to be radio problem.
Originally I had WM 6.0 Pro on my Polaris, and BT was working flawlessly.
Then I was stupid enough to upgrade to 6.1 WWE, and now I have all kind of trouble with BT connectivity. Downgrading back to 6.0 DID NOT help!
InSomNiaK said:
A Cruise Rev B, and a BT car's Kit (included in a peugeot, I thing a RD4/parrot stuff)
Actually my first call is ok, and then, heads phones are cutted (sometimes after 3 or 4 seconds), but my microphone still works.
My car's BT is still paired, and sometimes indicates that I'm still phoning, even if I've cutted it on my phone.
Click to expand...
Click to collapse
I have exactly the same problem, based on a slightly different configuration:
My car is a Citroen (with the RD4/parrot factory built in BT)...
My phone is a HTC TyTNII.... with WM6 I couldnt even pair the phone, so I upgraded to WM6.1
Actually I had to drive to the workshop to cut the power on the car, because the parrot BT unit wouldnt stop even tho my phone was off in the meantime.
I start to believe this is not a problem caused by my phone, but a fault SW version on the parrot unit.
I have pioneer deh-p7000bt and it works flawlessly with my polaris in handsfree and a2dp mode.
to have better quality i have to turn srs wow hd off.
in advanced config i set:
-use joint stereo: no
-bitpool: very high
-max bitpool: 64
-min bitpool: 32
-sample rate: 44100
-audio getaway: enabled
Is there anyone who solved this problem yet? I have the exact same problem. When someone calls me, I cannot hear the other party through my car speakers (Citroën C5 newest model without navidrive)
I just tried http://www.jetwaremobile.com/ and this seemed to solve my problems. I had to restart my TC after installing this and removed the relationship in my car. After I made a new relationship (pairing) everything seems to work fine. If this changes I'll let you know.
I am having the same trouble, which started after upgrading to WM 6.1. Am I right in understanding that the Bluetooth is controlled by the Radio ROM and if so is it possible to downgrade just the Radio ROM? I think mine originally came with 1.58.25.14 and the upgrade replaced it with 1.59.42.15, is there a procedure to do this, and has anyone had any success.
Sorry had a search and found http://forum.xda-developers.com/showthread.php?t=381600 which shows how to install just radio ROM, am just unclear as to whether you need to install Hard-SPL first as it is an official ROM and as to if changing radio clears all personal data from the phone.
I use to have a similar problem with the 4-5 second delay. i found that once the car is paired up with the phone, i ran bluetooth audio toggle, or other bluetooth audio program which makes all audio go through the vehicle all the time, including GPS navigation. This way when the phone rings, the ringtone can be heard through the speaker and when you answer it will be instantanious....... in theory.......... i mean, it worked for me anyway....
Then all you have to do is find some way to auto run the toggle everytime you pair your device to the vehicle...

Htc Hero Bluetooth Car Kit

Hello
I am trying to get my Hero to connect with my Lexus RX400h's bluetooth car-kit. I can pair the Hero with the car but it will not reconnect. Is there a way to authorize the Hero to alway reconnect without having to re-pair?
Any help would be great.
Thanks
Jon
It should remember it. I've never had a problem with my own bluetooth kit.
I get paired but not connected with my thb bury kit there are lots of posts on here about bluetoth issues 5 series bmws also have problems, htc support say they are waiting for an update from google
I'll add the Range Rover Sport to the list of cars with bluetooth issues.
I can connect OK, but as soon as the phone is connected it disables the phone keypad on the car dashboard so I can't use it to access voicemail and other menus.
Worked fine with my Diamond and Touch HD
Toyota TNS 510 carkit wont work either. It pairs ok, it even pairs the A2DP system. When pairing is finished a little message appears on the phone saying there was a problem with the bluetooth handfree thingy.
andy2111 said:
I'll add the Range Rover Sport to the list of cars with bluetooth issues.
I can connect OK, but as soon as the phone is connected it disables the phone keypad on the car dashboard so I can't use it to access voicemail and other menus.
Worked fine with my Diamond and Touch HD
Click to expand...
Click to collapse
What model year is your RRS ? My MY08 D3 works fine with the Hero... contact list navigation is far better than my 'old' Nokia N85. If your RRS is pre MY2008 there is an ECU update for the Bluetooth PTI I believe.
I'll add a Jaguar XF to the list. Hero will pair ok, then it will disconnect. it will disconnect a few times before it settles down. Whenever it tries to auto-connect, it will disconnect 2 or three times before it stays connected. sometimes it wont connect at all, a quick disable, then re-enable of bluetooh on the hero then gets it to connect again.
Didnt have any problems with any BlackBerry's, Touch Diamond, Nokia e52. Looks like we're waiting on Google for a fix. I wonder if their continual beta policy applies to updates as well as full blown applications?
Peugeot 407 SW ('07)- Pairing okay, connects okay too. On phone call the radio is muted, call picked up (on incoming), but the sound keeps coming through ear piece for 4-5 sec and then it eventually switches to speakers.
HTC cust support not very supportive... pointing me to go to the car manufacturer for support... :s
The Hero and/or Android does not support the bluetooth stack's remote Sim Access Profile (rSAP/SAP) required by many car kits (VAG, Lexus etc.). This might be the issue here.
http://en.wikipedia.org/wiki/Bluetooth_profile#SIM_Access_Profile_.28SAP.2C_SIM.29
Let your car do the pairing
Turn bluetooth on your phone and let your car discover and pair with the phone. Your carkit will suggest the passcode enter it in you phone and not the other way arround. That might work, It did for my Porshe.
How do you transfer bluetooth contacts??
Hi. I have my bluetooth car kit working fine, it is with a pioneer head unit. At first i would have to manually connect it, as the phone can only be made visible fo 120 seconds. Hoever after doing this 5 or 6 times, it then automatically conected every time. Just keep trying and see if it eventually does it.
Also.... How do you transfer your contacts lists to the bluetooth device?? I cannot find anyway!! please help!!
No Go on the Mazda 3
just bought a 2010 Mazda 3 sport and the bluetooth does not work with hero.
it pairs with the phone and then occasionally connects. however when you dial a number by voice or keypad the system in the car locks up completely for about 4 mins. tried other phones and works perfect.
Strange thing is it did work once for a day but then went all haywire after that.
would rooting the phone and installing a different rom open up the bluetooth any more so it can communicate better.
Dont want to get rid of the phone but unless i can find a remedy im gonna have to get a different phone.
I have Lexus ES350 2007, It's paired and auto connect with no issue! I have a tiny issue with incoming call in navi screen it display "not supported" instead of caller name!
Also it ringing in my Hero for 4 seconds then it ringing in my car?!
Thanks
Sorted
Well ive sorted th bluetooth problem.
once paired as long as i dont turn off bluetooth on the phone then it connects / reconnects just fine. if i do turn bluetooth profile off then when pairing i need to make phone visible before i get in the car and it picks it up again.
sorted.
2010 Mazda 3 and HTC Hero Bluetooth
Have the exact same problem as Wingy999 and if I leave the bluetooth switched on on the phone I have no problem.
But if I do switch it off/restart the phone, even if I make the phone visible when I get in the car, it does not connect and I have to delete and repair the phone to the car.
Can you help wingy999?
Yes/No
Well its a case of Yes it is and No it isnt.
Sometimes, for a few days i have no problems with phone. Then for no reason it decides to connect (picture of the phone on dash) but it cant communicate with the car. So when you dial it just hangs the system.
Got sick of pairing it to be honest so have left it for now. i wondering if rooting the phone might be a way forward.
yeah, no clue if rooting will help, but im def waiting for it to be possible. lots of cool things that can be done.
the bluetooth problem is to do with the android bluetooth api itself from what i understand. google haven't figured it out entirely yet and so only released it with basic functionality. even once modders are able to get inside the cdma hero, i dont think they can get at the low level bluetooth functionality and make changes. I could be wrong, but if it were the case, we'd see things like obex object transfer available on the GSM Hero's already.
I also have the same problem with my 2010 Mazda 3 and my sprint HTC hero.
I am probably going to have to return the phone. I was hoping for an update or a fix.
It is critical that the bluetooth feature works.
Another annoyance is that I cannot turn the bluetooth streaming audio. Even though the car and phone both have this feature, I do not want it on. I want to be able to turn on bluetooth for phone but not bluetooth streaming audio.
The HTC touch pro 2 (windows mobile) could turn each of the 2 bluetooth services off independently (and worked for both), the HTC Hero does not allow this (and doesn't work with the car anyway).
Huge thumbs down for an otherwise great phone.
My issue is with a Jabra SP700 Bluetooth speakerphone. My phone is paired, is detected and the phone even says 'Bluetooth Headset Connected'.
However, sound is not routed to the speakerphone, it just comes out of the phone speaker...
FYI I'm running MCR 2.8.
BMW 1 series 08 and HERO
Before I buy an HTC Hero does anyone know if it will work with my BMW 1 series

Bluetooth and S9 issues on 2.73 ROM

Hi
I have the T-Mobile G2 Touch and a Motorola S9 headphones. Using the Origianl Stock T-Mobile ROM i have had no issues with bluetooth.
BUT
using the generic 2.73 ROM i have issues with connecting to the headset
It will connect, then instantly disconnect, then try to connect again, at which point it fails to connect properly
To Reproduce:
Using a HTC Hero & 2.73 ROM
Pair your S9's with the Hero
then Turn off the S9's and Bluetooth
Then turn on Bluetooth, and the S9's with the Bluetooth Settings up
you will see it say "Connected with Media", "Paired but not Connected", then "Connecting......." at which point it will fail
I have tried all the different radio versions to make sure it isnt a issue with the radio, but the same problem prevails.
Does anyone have any ideas on how to fix this issue? or what is causing it?
I also had issues with an unlocked Hero and a Sennheiser MM200 headset. Worked perfectly on original rom, but very fiddly to setup with the 2.73 rom.
The only way I can get them to work properly with the phone is to:
1) Make sure headset is turned off, as well as bluetooth on phone
2) Turn on headset
3) Then turn on bluetooth on phone
Headset connects as normal - any other sequence doesn't work.
I have tried this, and it doesnt seem to work. I have been trying it for the last hour.
While in Bluetooth Settings it says its connected with media, then is disconnects, then it trys to connect again, and then it just says "Connecting.........." for ages
The Headset light flashes as if it was connected.
I also had problems connecting MM200. I could connect it, but then it kinda stuck when i was pressing play button.
But then i decided to check my old sony ericsson bluetooth headset - it was working normally. And after that the MM200 also was working. One wonders.
Still i've noticed some stuttering problems when song starts. And it seems to start with faster tempo and then slow down after 10 seconds to normal speed (could be related to that stuttering? Trying to compensate for the lost time or something). No issues when i'm listening to wired headphones - so it must either something with hero bluetooth or MM200.
I have to check how it works with my old headset, but i'm kinda afraid of having MM200 connection problems again.
Ok
i will keep playing around. i have some CX-300II coming next week so i have a backup plan if i cant get the bluetooth stuff working properly
Thanks for your help
raywiper said:
I also had problems connecting MM200. I could connect it, but then it kinda stuck when i was pressing play button.
But then i decided to check my old sony ericsson bluetooth headset - it was working normally. And after that the MM200 also was working. One wonders.
Still i've noticed some stuttering problems when song starts. And it seems to start with faster tempo and then slow down after 10 seconds to normal speed (could be related to that stuttering? Trying to compensate for the lost time or something). No issues when i'm listening to wired headphones - so it must either something with hero bluetooth or MM200.
I have to check how it works with my old headset, but i'm kinda afraid of having MM200 connection problems again.
Click to expand...
Click to collapse
I think the speeding up / slowing down and stuttering is more to do with the Hero - I have tried the headset connected to a laptop and there is no problem whatsoever. Hopefully the next Android update will improve the bluetooth problems.
not compatible with new mazda 3
Well the hero is probably the best phone ive had and ive had many many phones over the years including the jesus phone which was pants.
Well ive just bought a new mazda 3 and unfortunately the hero does not like connecting to the car via bluetooth. tried all sorts. sometimes it works but usually only for a couple of times and then manages to lock the car radio up.
So its bye bye hero for me as i need a compatable phone for my car. looks like its back to nokia...shame as i really love the phone

Bluetooth Audio Problem

Hello.
I have just bought a Dell Streak in Dubai. It was android 2.1 and I was able to immediately update it to 2.2. It works beautifully, is fast and does everything I throw at it and more.
Problem:
Bluetooth audio simply does not work. I have tried pairing it with my car kit, a nokia headset, a jabra headset and a generic bluetooth headset. It pairs fine with the headsets and phone calls seem to go to the headset but there is no audio in the headset. The person on the other side also cannot hear anything. And after i press the bluetooth button during the call to bring the call back to the phone, the headset(or car kit) seems "locked" and only gets free when I switch off bluetooth on the streak.
Bluetooth file transfer works fine and I have tested it with a samsung galaxy s. But it doesnt work for phone calls. It is a major problem as it is difficult to use the device without the bluetooth on a regular basis and especially in the car.
I would appreciate any help in this matter as I love the device but as I spend considerable amount of my time driving, it is getting very annoying.
I had originally posted this on the Dell support forum and I was recommended to post it in the XDA forum.
Thanks
Babar Malik
I use my dell streak with my motorola s10 bt headset and my car bt handsfree system and have no issues at all.
Maybe try un-pairing all devices and repairing them and testing then one at a time and see is that helps. Askari when a device is connected go to settings, wireless, bluetooth and see if you can tap and hold on the connected bt item and see if you can adjust its settings.
Sent from my Dell Streak using XDA App
Thanks for the assist but i tried unpairing and pairing but it did not work. Not too many options in the menus to change so I am pretty much stuck here.
As I have updated to android 2.2 from 2.1 which came with the phone, would a factory reset send the system back to 2.1 and then i can check whether bluetooth works or not? I mean, I cant think of anything else to do.
Is it possible that something i have downloaded or installed on the sd card is causing audio conflict with the bluetooth audio?
Thanks

Categories

Resources