Related
hi guys, i bought a new o2 xda2 from my friend. he also had a logitech hs02-v bluetooth headset working with it. i took the headset to try but it didnt communicate while the xda2 had paired it.
i tried other headsets but no one worked.
xda2 finds the headset, make a pairing(i enter the passkey 0000) and then nothing....
so please help me
Connect the headset to the PC using the utility provided and change the paskey to any other(Like 1234) and then try pairing it...
Most probably it should work fine...
---------------
Sanjeev K Purohit
Did you turn your "Bluetooth Profile ON"?
After you paired your bluetooth-device.
You need to turn bluetooth on (by click at bottom right at Bluetooth icon).
and To turn bluetooth headset on, You need to click at Bluetooth Profile to make it on.
The Bluetooth Profile is stay on your Today screen.
:?: :shock: I have exactly same problem, using latest official rom and stuff - no bt tools or something.
Update: Works with BTTools :idea: 8)
Update of update: It seems that headset needs pairing each time after you turn it off and on. :shock:
I just got the logitech one this morning, it works ok with the MS stack, but I prefer using the widcom stack.
When I use the widcom stack the icon saying that I have the bluetooth headset is there, but the calls dont get channeled to it.
Is it possible to use the widcom stack for headsets? Or is it simply an incompatability?
ok i simply hard reset the device and the profiler brought bluetooth profile. now its ok.
Hi all,
I have an MDA II and a Plantronics M2500 BT headset. So far so good....
I managed to connect them together, and after some work (bonding, etc.), I was able to phone using my headset.
However, I have the following problem:
If I switch on my BT headset and enable BT on MDA II (so BT 'on', BT headset mode 'enabled'), the 2 devices do not automatically connect.
I have to 'play around' a bit, e.g. by disabling/enabling BT headset mode, turning BT settings on/off/discoverable, turning on/off the BT headset, and try calling some numbers for testing before it works.
After a short while (and if I'm lucky , I can call and receive calls using my headset.
This is of course not the ideal situation. I'd like to have the devices work automatically as soon as I turn them on.
I have the suspicion that this is a bug.... Did anybody else have similar problems and does anyone have an idea how to get this fixed?
Oh yeah: I am using a BT GPS mouse as well for TomTom 5 and this device is also bounded to the MDA II.
Thank you very much in advance!
BTW: the quality of the BT headset (once I get it working) is pretty good, so no problems there...
Yep, one of the problems with (some) BT sets...
Didn't have is with a Sony Errocson HBHxxx, did with a Jabra, didn't with a Supertooth2 etc....
Try the famous BTtools, it often helps...
Or get another headset
Hi,
I have a Vodafone P3600 which I had unlocked and flashed to test both HTC WM5 and Faman WM6 3.3 and 3.4. I have a problem using it with my Parrot CK3100, and it's the following: devices pair perfectly, but when I leave my car and then return, most of times P3600 does not connect with handsfree. Sometimes, it does connect, but after a long time. This occurs with any OS version I have tested.
A problem with CK3100 is discarded because I have flashed it with latest software version, and it was tested with a HP RW6815.
I tried disabling power saving, setting bluetooth as discoverable, installing Jetware, but nothing made it work as it should.
I'm near to sell my P3600 and buy a new HTC Touch only to solve this problem, because I need much a handsfree working in my car.
Can any of you give a hint of what the problem could be?
Thanks.
I forgot to say that if I power on my HTC, it always connect to the Parrot. But when it's in standby sometimes connects and others no.
I have an SonyEricsson HBH-DS200 and this works unfortunately with the P3600 also in a from you described way. I tryed AWE and PDAVIET and also AX3L ROMs.
Other points and problems with BT HandsFree are:
1.) A litle icon to show that the BT HansFree is connected will be showed in the status only after the first paaring. After that, nothing shows you, that the BT HansFree is connected (and therefor can be used) or not.
2.) After a phone call the BT HandsFree will be disconnected.That meanns, that I can not hear the phone ring in the earpice. I only hear it from the P3600. I have 2 choises after that:
a.) If I push te Answer button on the P3600, the voice is on the P3600.
b.) If I push the Answer button on the BT HansFree then the voice is on the BT HansFree (but it will be disconnected after the call).
3.) The volume can not be changed if I use the BT HandsFree. That means, the volume slide bar can be moved/changed, but this has no effect to the volume in the BT HansFree.
In my opinion if the paaring is done and the BT HandsFree is switched on it should be always:
- connected
- an icon in the status line appear
- the voice in the BT HandsFree - independent if the answer button is pushed on the phone or on the BT HandsFree
For me is the BT HandsFree very imortant, and I am a litle bit disappointed, that a device for 500 Eur works that buggy with a technology that is almost 10 year old.
hello everyone!
i just got my first bt headset, its an anycom aris21.
the pairing with my blueangel worked like a charm, but after a day of useage, i noticed several issues i kinda dislike....
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- people seem to have problems hearing me! can i change the microfone volume of the bluetooth headset on the ba?
- how can i find out what BT stack i have?
- i have now helmi_c's WM06 installed, no changes to bluetooth made.
what recommended changes/updates/patches/... should i try for better performance?!
what to install for best results?!? is that BroadcomBT1.7 still the way to go? what cabs do I need?!
i know, that some issues have already been adressed, but things are changing so fast here, that i have problems being up to date about all issues! so forgive my ignorance and please help me!
i would be very thankful!!!
regards,
krz
Yeh, the Blue Angel is a bit strange with some bluetooth devices.
I have the following issues with WM6 on my BA, which did not exist with 2003SE:
1) When Bluetooth is active, the device turns on by itself every minute or so. I understand that this is a hacked "feature" to prevent the bluetooth from turning itself off. This is probably the most annoying thing about WM5/WM6. Is there any fix I am not aware of?
2) When I start from scratch and pair my carkit (Parrot), everything works OK, except that BA's sound putput, i.e. for Microsoft Voice Command, is coming from the BA instead of the car kit. This is too low a volume, to be clearly understandable in a car. With my Universal (also on WM6) this does not happen.
3) After pairing my Asus GPS, nothing works. If I delete all paired devices and just pair my Asus without being in range of the car kit, it will work. If both devices are turned on (car kit and GPS Receiver), none works properly.
I don't use my BA on a regular basis anymore, because I have my Universal, which works flawless. However, I see no paint in upgrading to WM5/WM6 if one ends up with LESS functionality than the original 2003SE.
The only feature I will be missing is the fact that no RAM memory is used, which means one does not loose everything when the battery drains.
Are there any tips to solve these three problems?
The WLAN "bug" is not really a problem: even with 2003SE I had to occasionaly start and restart the WLAN for it to work properly.
Cheers,
vma
@vma:
1. Well, not at the moment; maybe if someone who can play with the dll's can fix this.
2. I use a Logitech hands-free, and i have no problems.
3. No problem here using a NoBrand BT GPS receiver and the hands-free in the same time.
Overall, my BA work much better on WM6; its just my experience.
problems i still have:
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- how can i find out what BT stack i have?
- i installed that Boradcom stack 1.7 without having any succes in getting my headset to work. with or without patch1 and htcheadset! any ideas?!?
- what excactly is that HTC HEADSET ADDON ?
please answer soon, any help is very much appreciated!!!!
thx in advance,
krz
1. Same here; i think is my hands free set limitation.
2. I get the same using the Broadcomm stack; use the MS stack.
3. Depends; if you use Broadcomm/Widcomm, you have an "about" box; if you use MS, i don't know.
4. i get it working, but with audio in hands free AND speakers; annoying.
5. don't know, try Google.
DANDANA said:
@vma:
1. Well, not at the moment; maybe if someone who can play with the dll's can fix this.
2. I use a Logitech hands-free, and i have no problems.
3. No problem here using a NoBrand BT GPS receiver and the hands-free in the same time.
Overall, my BA work much better on WM6; its just my experience.
Click to expand...
Click to collapse
What Bluetooth Stack you use ?
First, I use the existing MS Stack on Helmi WM6. BT GPS and Handsfree couldn't run at the same time.
Second, I use Broadcomm Stack 1.71. BT GPS and BT Stereo could run at the same time, but Hands-free function didn't run at all.
Give me a light please.
your bluetooth headset
A few of your problems could be from the bluetooth headset you are using now-- such as when people can not hear you clearly. I currently have a sound id sm100 bluetooth headset and it works flawlessly....although i still can not activate voice calling from it(it activates it on my BA so i have to talk into my BA and not my headset). It could just be your headset.
shazzy84 said:
A few of your problems could be from the bluetooth headset you are using now-- such as when people can not hear you clearly. I currently have a sound id sm100 bluetooth headset and it works flawlessly....although i still can not activate voice calling from it(it activates it on my BA so i have to talk into my BA and not my headset). It could just be your headset.
Click to expand...
Click to collapse
Yeah, Bluetooth in BA really sux... you have to choose your bt handsfree wisely, make sure you try it on BA properly before buying it... currently I am using i clip II mini, and it is giving me the same behaviour as shazzy84's
KRZTF said:
hello everyone!
i just got my first bt headset, its an anycom aris21.
the pairing with my blueangel worked like a charm, but after a day of useage, i noticed several issues i kinda dislike....
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- people seem to have problems hearing me! can i change the microfone volume of the bluetooth headset on the ba?
- how can i find out what BT stack i have?
- i have now helmi_c's WM06 installed, no changes to bluetooth made.
what recommended changes/updates/patches/... should i try for better performance?!
what to install for best results?!? is that BroadcomBT1.7 still the way to go? what cabs do I need?!
i know, that some issues have already been adressed, but things are changing so fast here, that i have problems being up to date about all issues! so forgive my ignorance and please help me!
i would be very thankful!!!
regards,
krz
Click to expand...
Click to collapse
Well I found a way to solve the BTA2DP problem. It supports stereo & is just fantastic. you can find these by the following link http://www.teksoftco.com/index.php?section=freeware & this software works too http://www.trianglepowers.com/PPC/ViewApp.aspx?ID=52 (have to register to download). I prefer Teksoft freeware as I am using it. Sometimes it takes a while after a few toggle u get it right
Lost in China
I have a problem with a Chinese Dopod HS-01 BT Stereo Headset!!!
Phone works, but the Stereo Headset starts for a second or two and then it is gone!
Please, help!
Admire people who can bring an answer!
I myself only good in learning physical languanges. So need MP3 HeadSet!
Also using SuperMemo CE the most beautiful tool for language learnig!
Is there any other solution then to change the registry and the things?
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
No one to ask for help over here!
My MSN:
[email protected]
Skype:
janicic
MySpace:
www.myspace.cn/taijiyoga
Hi there,
Finally I assume I found out why some people have problems with their unit using BT and others not.
Those, who use BT headsets only (not stereo) and don't use the AD2P and AVRCP Profile don't have any problems. (I can confirm this - tested it with HBH-660 and Motorola without any troubles!)
And those people who have a stereo headset like the HBH-DS980 (which I own personally) and/or do own a car radio that can receive AD2P signals to transfer Stereo sound, face with the BT disconnections while listening to music and/or during a call or just right after...
So I think SE should solve this issue quickly as it seems to be a problem in WMP 6.1 in accordance to X1 hardware with AD2P / AVRCP profile devices.
So I start a poll for anyone who could confirm this or not !
BTW: I am using the Generic AT ROM but this BUG is affected through all other ROMs too, so that shouldn't matter -
Thanks,
Freako
My kenwood headunit uses avrcp and a2dp and works fine.
There was a discussion on this issue already and it does exist w/ my AT&T Tilt (Kaiser) as well w/ all the A2DP headsets I tried (SE DS220/205/980, JVC BT-1, ClipD R Radio, Jabra (forget what model)) so far
I believed the bluetooth issue that R2A fixed is another one where BT will turn itself off if not use for a while.
The 'turn off' issue is still there with mine! I had it only after 2,3 days but then continuously turn off by itself! Now, still happening! Generic_UK R2A
Generic Swedish R2A.
No problem for Bluetooth! But when I softreset x1 via spb mobile shell panell it crashes on boot.
jackleung said:
There was a discussion on this issue already and it does exist w/ my AT&T Tilt (Kaiser) as well w/ all the A2DP headsets I tried (SE DS220/205/980, JVC BT-1, ClipD R Radio, Jabra (forget what model)) so far
I believed the bluetooth issue that R2A fixed is another one where BT will turn itself off if not use for a while.
Click to expand...
Click to collapse
Yes absolutely Jackleung, you're right, the new firmware should have fixed the automatic turn off of BT only, but I belive what michaelthemage said, that it still exists after his UK firmware update so do I - today the BT icon dissapeared suddenly - so it was turned off automatically ... very curious...
Anyway, Jackleung, you say that this problem was present in earlier WM6 machines like the Kaiser? As far as I know I did not try a stereo BT headset on my previous Tytn II but you say it seems to be a bug in WM6.1 in general, right ?
Very interesting that trinode doesn't have these problems with it's Kenwood headset - maybe I give it a try if it isn't too expensive -
On the other way Persian Boy links it with the SPB Shell - I do have the standard SBP Panel that you can download from web. Maybe I should uninstall it and try again - maybe the SPB panel makes these troubles? Personally I can't imagine, but will try anyway -
So far,
Freako
trinode said:
My kenwood headunit uses avrcp and a2dp and works fine.
Click to expand...
Click to collapse
Can you please tell me the exact brand of this headunit by kenwood?
So you did try transferring music to the kennwood radio and there were no problems like sudden disconnections or so?
Thanks,
Freako
Freako said:
Yes absolutely Jackleung, you're right, the new firmware should have fixed the automatic turn off of BT only, but I belive what michaelthemage said, that it still exists after his UK firmware update so do I - today the BT icon dissapeared suddenly - so it was turned off automatically ... very curious...
Anyway, Jackleung, you say that this problem was present in earlier WM6 machines like the Kaiser? As far as I know I did not try a stereo BT headset on my previous Tytn II but you say it seems to be a bug in WM6.1 in general, right ?
Very interesting that trinode doesn't have these problems with it's Kenwood headset - maybe I give it a try if it isn't too expensive -
On the other way Persian Boy links it with the SPB Shell - I do have the standard SBP Panel that you can download from web. Maybe I should uninstall it and try again - maybe the SPB panel makes these troubles? Personally I can't imagine, but will try anyway -
So far,
Freako
Click to expand...
Click to collapse
The problem I am talking about is A2DP/Headset disconnected after phone call, and I have to re-connect it after that. I don't thinks it's WM6 or SPB panel issue since only HTC devices (X1, Kaiser w/ no SPB install) have this issue. My other device Asus P525 (WM6/6.1 w/ Widcomm bt stack) or Eten M600 (WM6 w/ MS BT stack) do not have this issue.
Is anyone with the Bluetooth problem running MS Voice Command? I'm still on R1A. I had no trouble at all using my Motorola T505 A2DP kit, but when I installed MSVC, the stupid thing would drop out as soon as I picked up a call. Uninstalling MSVC seems to have done the trick.
bedlam_au said:
Is anyone with the Bluetooth problem running MS Voice Command? I'm still on R1A. I had no trouble at all using my Motorola T505 A2DP kit, but when I installed MSVC, the stupid thing would drop out as soon as I picked up a call. Uninstalling MSVC seems to have done the trick.
Click to expand...
Click to collapse
Hi, yes I have Voice Command 1.6 on my device. It's working pretty well, but I know, what you're talking about -
Please try it with a usual BT headset (without the AD2P / AVRCP profiles!) if you have this possibility, - you'll see that it will work without any hassle.
I made this experience after I tried the HBH-660 and a Motorola headset.
Anyway - the new firmware R2A is recommended, even if the BT issue isn't solved.
But interesting to know that it seems to be a bug in HTC machines... so it will exist in further firmware updates... probably... I personally don't hope so....
No problems with the Sony HBH-IS800's and the bluetooth turning off randomly.
I have a problem with the WIFI randomly turning itself on during phone calls but no problems with anything turning off.
I have HBH-DS980 and I don't have any problems with disconnecting it on my X1 - not with R2A and not with R1A UK roms, also tested few modifided roms and there woudn't any problems too. I am also using SE MBW-150 watch and it also don't disconnect's with X1 (tested with R1A and R2A). I have BT turned on in my X1 all the time (previously in R1A rom and now in R2A) and after I turn on my HBH-DS980 headsets it will connect with them automaticly. Only sometimes I have to switch off and switch on againg BT to get connected with headsets but I think its headsets problem not the phone. But I never had a problem with suddenly disconnecting (not even once).
ell82 said:
I have HBH-DS980 and I don't have any problems with disconnecting it on my X1 - not with R2A and not with R1A UK roms, also tested few modifided roms and there woudn't any problems too. I am also using SE MBW-150 watch and it also don't disconnect's with X1 (tested with R1A and R2A). I have BT turned on in my X1 all the time (previously in R1A rom and now in R2A) and after I turn on my HBH-DS980 headsets it will connect with them automaticly. Only sometimes I have to switch off and switch on againg BT to get connected with headsets but I think its headsets problem not the phone. But I never had a problem with suddenly disconnecting (not even once).
Click to expand...
Click to collapse
Thank you very much ell82, but maybe I should describe more specifically - disconnections also happens after calls - for example, if you switch on your BT headset (in this case the DS-980), you see a symbol next to the BT symbol on the top of the phone, that indicates, that a BT headset is connected. Now, I figured out, that after calls this symbol dissapears and the BT headset dissconnects, so I have to push the button on the DS-980 again to get connected with the phone, you know? And when I get a call, the phone does not automatically transfer the call to the headset, I always have to push the button on it first, to be connected again...
And you also confirm that sometimes you have to switch the BT on and off again - this is absolutely the same with my phone.
You assume it is a problem with the specific headset DS-980 ? Maybe, but SE support told me that there is no firmware update or sth. similar for this type... what a pity -
Anyway I hope it is not a hardware bug of the phone - I haven't heard of any phone that was repaired or refurbished because of the Bluetooth bug.
Ok, so can we say that the HBH-DS980 will not work with X1 as it should do ?
This is very pity, because it is the top of thir line of headset products... and I liked it very much on my previous P1i and it worked perfectly on it...
Freako said:
Thank you very much ell82, but maybe I should describe more specifically - disconnections also happens after calls - for example, if you switch on your BT headset (in this case the DS-980), you see a symbol next to the BT symbol on the top of the phone, that indicates, that a BT headset is connected. Now, I figured out, that after calls this symbol dissapears and the BT headset dissconnects, so I have to push the button on the DS-980 again to get connected with the phone, you know? And when I get a call, the phone does not automatically transfer the call to the headset, I always have to push the button on it first, to be connected again...
And you also confirm that sometimes you have to switch the BT on and off again - this is absolutely the same with my phone.
You assume it is a problem with the specific headset DS-980 ? Maybe, but SE support told me that there is no firmware update or sth. similar for this type... what a pity -
Anyway I hope it is not a hardware bug of the phone - I haven't heard of any phone that was repaired or refurbished because of the Bluetooth bug.
Ok, so can we say that the HBH-DS980 will not work with X1 as it should do ?
This is very pity, because it is the top of thir line of headset products... and I liked it very much on my previous P1i and it worked perfectly on it...
Click to expand...
Click to collapse
This is exactly the same issue I am talking about and it's NOT specific to DS-980 alone. I tried DS-980, DS-205, DS-220, JVC BT-1, Clip-D Radio, and one Jabra model. And they all have the same issue on my X1 and Kaiser. (but not on my Asus P525 and Eten M600). The issue not happening 100% of the time but at least 80% which is enough to be frustrated.
jackleung said:
This is exactly the same issue I am talking about and it's NOT specific to DS-980 alone. I tried DS-980, DS-205, DS-220, JVC BT-1, Clip-D Radio, and one Jabra model. And they all have the same issue on my X1 and Kaiser. (but not on my Asus P525 and Eten M600). The issue not happening 100% of the time but at least 80% which is enough to be frustrated.
Click to expand...
Click to collapse
Yes, 80% of that time is ok, but the 20% lead to be very frustrated - ABSOLUTELY !!
In a time (2009) were bluetooth does exist several years and where all bugs should have been cleared over the years..., the truth shows that there still exist "minor/major?" bugs in current phones...
BT Headset problems
I can confirm that the problems with BT and HBH-DS970 are a fact - and it seems to drain the battery enormously. I have tested for a few days the PV 710 (Mono handsfree), no issue. Today with the 970 my battery was empty after 6 hours standby, and it was disconnected allthough the icon said "BT-Stereo-Headset connected! After switching it off, the icon remained. Strange, isn´t it?
I come from P1i and there was no such problem at all.
I experience the same problem. New NL firmware and a Volkswagen (Bury OEM) Bluetooth carkit. My Nokia 6500 and SE K850i work perfectly but terminating a call makes the BT connection disappear on a fairly regular base. If the other party terminates it usually stays connected
...very strange but anyway it seems that it is mainly affected with AD2P / AVRCP devices - I hope it is just a software/firmware bug that can be fixed easily and not caused by a hardware failure....
Sorry guys but again I have to say it doesnt effect on my X1 and DS-980, never and I'm using it a lot. Have you guys tried it on fresh phone, without any additional software?
ell82 said:
Sorry guys but again I have to say it doesnt effect on my X1 and DS-980, never and I'm using it a lot. Have you guys tried it on fresh phone, without any additional software?
Click to expand...
Click to collapse
The first thing after the purchase of the phone was to couple the device with the DS-980 headset and the bluetooth issue was really not expected and made me angry and at that time I didn't have any extra software on it...
When did you buy your headset ? I bought mine approx. 1 1/2 years ago...
Maybe the current items go better with the X1?? I don't know.
But we found out that this issue was also caused in other Windows Mobile devices like the Kaiser, TyTn etc.
The poll shows significantly that there are still some who have troubles with bluetooth, even after update-
AND now we can ask them if any of you have tried the headsets with clean and fresh install ? (Xperia X1 without any additional software, even without sbp panel, etc...! )
I am curious...
Freako