Database Users

Rogue Data Connection while BLANK apn is selected

Hi everyone. I have a problem that makes NO sense at all - but it's still a problem. Here goes:
As per recommendation of a number of people around here, and because I do not have a data plan, I have had two APNs for a while now: one was the real orange UK apn I use (let's call this "real") and the other, named "null" was empty (let's call this "fake"), so that I could switch between them and avoid paying most of the time. This worked perfectly up to...
The day I received an sms (perhaps mms? not sure) from 1550. As far as I know that's the number Orange UK spams its users from. There was the text "RockCorps" and a very small attachment (15kb I think). I accidentally pressed the "download" button but did cancel right after. I'm not sure if anything downloaded at all, but I didn't actually notice anything different, except...
My data connection was suddenly on. I could see the GPRS icon, and NetSentry also reported transmitted data. I checked the apn selection screen, which confirmed that my apn was still set to the fake one. But data was being transmitted!
So while I am using a fake, blank APN, gprs goes on and off as it pleases and transmits data.
I find this very alarming (and costly). I have tried to fix the issue by:
*selecting only 2G networks (to be safe)
*turning off always on mobile data
*turning off pretty much any phone setting that have to do w/ mobile data/GPRS.
*deleting ALL apns and re-creating them
*restoring apn list to blank factory setting and then reentering both apns.
NOTHING has worked. The phone still acts as if I have the real apn selected although the fake one is selected.
The ONLY method I've found so far for the phone to stop rogue GPRSing is to delete the real APN from the list. But whenever I add it again, without selecting it, the phone exhibits the same behaviour I describe above.
I'm clueless and a bit worried here. This is not making any sense, and the exact same settings I'm using now were working perfectly exactly up to the minute I opened the aforementioned message. Can anyone please help?
---further phone info----
HTC Magic, w/ cupcake, bought in Greece fully unlocked, with NO settings/added applications added by the carrier. NOT rooted.
Using it in the UK, on Orange mobile pay-as-you-go.
I had to enter mobile data settings myself: only entered GPRS apn (I'm not sure if that's a choice or up to the provider, but I've never seen any edge/3g icons up there).

been using Fido 3G for 1 week, now hasn't worked for a day

I've had a new smart phone (HTC magic from rogers) on Fido for a week now and it's been working great. I got a data plan and i've been using the data for a week, no problem.
Today I go to turn my data on, and no matter how many times i turn the phone on and off, or turn the 3G toggle on and off, it won't connect. The little 3G symbol at the top of the phone won't appear and I can't get a connection.
I updated to the cyanogen 2.1 rom (the newest fully stable one) and I haven't had any problems, and it's still working great other than the 3G.
Any idea how to fix this? I'm using the APNdroid widget to toggle 3G on and off.
name: Fido internet
APN: internet.fido.ca
proxy: non set
Port: 8080
Username: fido
passworkd: fido
server: not set
mmsc: not set
mms proxy: not set
mms port: not set
mcc: 302
mnc: 370
authentication type: none
apn type: non set

It's what rogers does to people who dont update to their 911 update. They block unotherized devices. Call them and ask them to enable you data and ask them to remove you from the block list. Sometimes it takes a while for the system to find you and thats why you had your data for a week.

im having the exact same issue. did you ever figure it out. i just got the phone and everything was great then after a few days the 3g etc stopped working. i was messing with the apn settings and at the same time talking to fido. they reset it or something on there end and it started working. now a few days later and the same things happened again. its been off for a few days now. my radio version is 6.35.08.29 is that a problem with the 911 thing?

can anyone help. seems after fido reset it for me im ok again but after a few days i assume its gonna happen again. can anyone with rogers htc magics on fido chime in and let me know if they have any issues and what rom etc there using. thx

i havent expierenced this, ill think abt wut to do

its because i didnt have the 911 update. ****s up rogers and fido. updated and no more issues however i cannot root the phone anymore and am stuck on 1.5 now. **** you rogers

I think keeping your rooted ROM and signing the Waiver here www.rogers.com/htcwaiver would have worked just as well...

yea oviously however if you read the post above we are using fido and they have no such thing

Hi blazinlow,
Were you able to get your data back? I'm also Fido customer using a rooted HTC Magic and suddenly today lost internet connectivity (no 3G or EDGE) after a week. I called Rogers and the CSR doesn't seem to know what I'm talking about as he can't even find my number. He did, however know about the 911 bug and the mandatory update but insisted that I call Fido as they have control over the network?!! I wonder if I would have to get the issue escalated to their Tier 2.

well you can try with fido i had no luck. i updated my phone and now have no issues aside from no custom rom and being stuck on 1.5 meaning no navigation

I have FIDO as well and i have had my data connection dropped 3 times now. Im using a magic with 2.1. Every time that it happens I have to call in and get them to reset the connection on their end :/. Anyways they can't give me a straight answer on that either, its frusterating. What exactly is THE 911 update ? a radio update ? or firmware based.

Same issue - update?
Has anyone come up with a solution here. I've come across the same issue.
The phone worked fine on Rogers with no problem getting shut down, it is just now when I use a fido sim that we are getting the data shut down happening.
Unfortunately the 911 form provided above doesn't like my IEMI ("please enter a valid serial number") so I am left being not sure where to go next. A brief discussion with Fido tech support gave me the impression they don't have a clue how do anything other than a profile reset, which makes the problem go away for a few days.
A fall back to Android 1.5 is obviously not an option.
As I understand there may be a way to flash the base band and have an affect? Right now I am on base band 62.525.20.18H_3.22.20.17.
Any assistance would be much appreciated.
Thanks.

paulheth said:
Has anyone come up with a solution here. I've come across the same issue.
The phone worked fine on Rogers with no problem getting shut down, it is just now when I use a fido sim that we are getting the data shut down happening.
Unfortunately the 911 form provided above doesn't like my IEMI ("please enter a valid serial number") so I am left being not sure where to go next. A brief discussion with Fido tech support gave me the impression they don't have a clue how do anything other than a profile reset, which makes the problem go away for a few days.
A fall back to Android 1.5 is obviously not an option.
As I understand there may be a way to flash the base band and have an affect? Right now I am on base band 62.525.20.18H_3.22.20.17.
Any assistance would be much appreciated.
Thanks.
Click to expand...
Click to collapse
So after a long conversation wit Fido I have confirmed that they have no way (or perhaps interest) in utilizing the 911 waiver from Rogers and put invoking a 'stop reset' function.
They eventually fall back to the party line of, not our phone can't help you.
Again, anyone know if anything other than a fall back to ancient unusable versions of Android as a fix here?
Any help much appreciated.

[Q] Data connection

I havnt activated the Live services yet but does that stop the data connection. i have singal etc but cannot get onto websites etc. If im connected to wireless then it works fine.
Im on orange and have my APN details all blank wich is what i gather is needed.
My questions is, is there something i havnt done or do you have to activate live services before your data connection will work.

I started using WP7 without Live services, too. But I didn´t face your problem.
Maybe it´s still an APN setting issue.

Am i right in thinking that for Orange UK the APN fields are all blank ?
I may be wrong

I briefly checked a setting info page. It said the name for the APN is orangeinternet, user and password empty.

Ok cool i will try that, i'll give me phone a reboot just to make sure as well.

Hmm ok that didnt work either

I had the same problem tommy but just put orangeinternet in apn name & left the other 2 blank. It worked! like the chap above us said. Thanks!

50$ by paypal - if you SOLVE this problem! - Atrix internet

Atrix 4G internet is not working outside the USA (in Kuwait)
Hey there,
I have unlocked my Atrix,
I have a problem with the internet data connection
- wifi is okay
- voice calls are okay also
- I have set the access point parametes according to the local carrier (ZAIN KW, this parameters work on android version 1.6 w/o any problems)
- apn = pps
username = pps
passwword = pps
server = not set
proxy = not set
port = not set
mmsc = not set
mms proxy = not set
MCC = 419
MNC = 02
Authenication type = PAP or CHAP
APN type = default
- In phone info window (*#*#4636#*#*):
- Ping IpAddr: Fail IP addr not reachable
- Ping host name google.com: Fail: host unreachable
- HTTP: Client test: Fail IOException
- GSM Service: In Service
- GPRS Service: Disconnected
- Network type: HSDPA
- Data attempts: 0
- Data successes: 0
GSM Disconnects: ======DATA=======
StateCInactivateState
disconnected with last try at 3pm
fail because No error
- The H+ is seen on the status and sometimes E
- I have choosed the preferred network type to WCDMA preferred (which is supposed to work in Kuwait AND GSM Auto PRL
- However I can not access the net completely
I will paypal 50$ for who help me to solve this problem!

Call your provider and ask for them to push the network settings. They'll have you check the APN settings and likely do a battery pull.
I don't know exactly what it is that they do, but it's some sort of re-provisioning by the sound of it. I've had to call in and have this done and it's worked like a charm. It's worth a shot.

seems like signal problem try again with your apn and make sure its right. and use "default" instead "Default" sometimes some keyboards capitalize the first letter.
re check APN its right i guess its the problem.
did you freeze any service? or do something weird??? try a backup with thenfar recovery and flash again SBF and check if works, maybe you delete or freeze a service, after that if still not working try replace SIM card to see if this solve the problem.

Try these apn settings:
apn: pps
> username: annyway
> password: online
> *
> server = not set
> proxy = 176.0.0.65
> port = 8080
> mmsc = 176.0.0.21
> mms proxy = not set
> mcc = 419
> mnc = 02
> authentication type = not set
> apn type = default
Sent from my MB860 using XDA App

h8rift said:
Try these apn settings:
apn: pps
> username: annyway
> password: online
> *
> server = not set
> proxy = 176.0.0.65
> port = 8080
> mmsc = 176.0.0.21
> mms proxy = not set
> mcc = 419
> mnc = 02
> authentication type = not set
> apn type = default
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
thanks for the reply, these are old settings, i am using the updated one above

zen kun said:
seems like signal problem try again with your apn and make sure its right. and use "default" instead "Default" sometimes some keyboards capitalize the first letter.
re check APN its right i guess its the problem.
did you freeze any service? or do something weird??? try a backup with thenfar recovery and flash again SBF and check if works, maybe you delete or freeze a service, after that if still not working try replace SIM card to see if this solve the problem.
Click to expand...
Click to collapse
- signal bar is full
- apn is correct default in small letters
- have rechecked apn many times!
- did factory reset, rooted device and now on 1.5.7
- will try to change sim and see
(if thats works I will donate the 50$ to you!)

bongd said:
Call your provider and ask for them to push the network settings. They'll have you check the APN settings and likely do a battery pull.
I don't know exactly what it is that they do, but it's some sort of re-provisioning by the sound of it. I've had to call in and have this done and it's worked like a charm. It's worth a shot.
Click to expand...
Click to collapse
thanks for the reply, i will try that and see, will call them now

Q8Doctor said:
thanks for the reply, i will try that and see, will call them now
Click to expand...
Click to collapse
Good luck. Don't worry about the reward though, I just hope this works because I always have a third party device and know how much of a nuisance this can be!

bongd said:
Good luck. Don't worry about the reward though, I just hope this works because I always have a third party device and know how much of a nuisance this can be!
Click to expand...
Click to collapse
Checked w provider
Apn settn has to be entered manually they don't push it

Q8Doctor said:
Checked w provider
Apn settn has to be entered manually they don't push it
Click to expand...
Click to collapse
They don't push the APN but they can usually reset the network connection from their end. It's industry jargon my old provider had used. Not sure what it alludes to but it definitely helps.
Sorry I don't have the appropriate term.

bongd said:
They don't push the APN but they can usually reset the network connection from their end. It's industry jargon my old provider had used. Not sure what it alludes to but it definitely helps.
Sorry I don't have the appropriate term.
Click to expand...
Click to collapse
Did you go to "Data Manager"
then choose "Data Delivery"
make sure "Data Roaming" is turned on.
Without it, my Atrix will not connect to the internet either.
This is the solution, I think.

I realize you are half-way around the world from me, but I thought I would share with you what I am experiencing right now in northern Michigan.
I got my Atrix about 2 weeks ago and had absolutely no problems with it until last Friday, when I suddenly would get only Edge connectivity. My HSPA+ was gone. This lasted all Friday night. I had placed Gingerblur on my phone at roughly the same time this began to happen, so I thought this might be the issue. But after talking to some folks on he, I was informed that Gingerblur didn't change the radios. So, I flashed back to SBF 1.2.6 and reloaded my Atrix to 1.5.7, but I still got only Edge service.
On Saturday, I did see HSPA+ for a while, but speeds were slooooow. My buddy has a iPhone 3GS and an iPad 3G. Both of those were connecting at 3G and were pulling good speeds. My phone would only get Edge. (BTW, where I am at, we have only 3G, not officially HSPA+).
Yesterday, I spent an hour on the phone with AT&T tech support and got no-where, so I drove the 20-miles to my AT&T store. When I got there, I found that the in-store Atrix as well as the Inspire 4G were both only connecting at Edge service. So, the issue is not my phone, it is something going on with AT&T in my area.
I was back at the AT&T store today and they have no information to help me, but are talking to engineering to see what is going on. The 4G in-store phones again showed only an Edge connection when I was there today. All of the 3G phones were working great.
I don't know if this is related to your issue, but I thought it was similar enough to say something.
Fowldogs

bongd said:
They don't push the APN but they can usually reset the network connection from their end. It's industry jargon my old provider had used. Not sure what it alludes to but it definitely helps.
Sorry I don't have the appropriate term.
Click to expand...
Click to collapse
I have tried both, nothing worked
I have brought the donation up to 100$

fowldogs said:
I realize you are half-way around the world from me, but I thought I would share with you what I am experiencing right now in northern Michigan.
I got my Atrix about 2 weeks ago and had absolutely no problems with it until last Friday, when I suddenly would get only Edge connectivity. My HSPA+ was gone. This lasted all Friday night. I had placed Gingerblur on my phone at roughly the same time this began to happen, so I thought this might be the issue. But after talking to some folks on he, I was informed that Gingerblur didn't change the radios. So, I flashed back to SBF 1.2.6 and reloaded my Atrix to 1.5.7, but I still got only Edge service.
On Saturday, I did see HSPA+ for a while, but speeds were slooooow. My buddy has a iPhone 3GS and an iPad 3G. Both of those were connecting at 3G and were pulling good speeds. My phone would only get Edge. (BTW, where I am at, we have only 3G, not officially HSPA+).
Yesterday, I spent an hour on the phone with AT&T tech support and got no-where, so I drove the 20-miles to my AT&T store. When I got there, I found that the in-store Atrix as well as the Inspire 4G were both only connecting at Edge service. So, the issue is not my phone, it is something going on with AT&T in my area.
I was back at the AT&T store today and they have no information to help me, but are talking to engineering to see what is going on. The 4G in-store phones again showed only an Edge connection when I was there today. All of the 3G phones were working great.
I don't know if this is related to your issue, but I thought it was similar enough to say something.
Fowldogs
Click to expand...
Click to collapse
It is really annoying problem tha you are having, mine is more! because there is no net at all!
thanks for sharing your problems with us

I could really use that $100 :/ when you bought the phone did you activate it for the first time in the USA? In the IRC chat, a guy named shadowfalx has the exact same problem and the only difference between his phone running on the softbank JP network (with broken data) and mine running on Vodafone Australia (with working H+) is that he activated his phone for the first time in the USA with an AT&T SIM card, while I used a vodafone SIM in Austraila. I'm not sure about the technics but he thinks it has something to do with the SID being screwed over. I would get in contact with the person/place that sold you the phone and ask for a replacement and when/if you do get a replacement, ask specifically for it not to be turned on ever before, as you will have to turn it on for the first time with your ZAIN KW SIM card inserted.
Hope this helps, shadowfalx will have his replacement in a few days, we'll know for sure if thats the problem when he gets his new one and activates it in Japan not in the US
- DarkRyoushii

Out of curiosity, have you tried another SIM?

I fired off an email to a buddy in KW and had him compare his setting to the settings listed on their website. The only difference was
APN Type = default,spul
where you listed
APN Type= default
He is using a Nexus one not an Atrix but it is an Android.

try this do a factory reset to make sure all your setting are correct and the previous owner didnt uninstall something he shouldnt have, heres how. With the phone off, hold the Volume Down button while pressing Power. A Fastboot screen should appear. Press Volume Down to navigate to the Android Recovery selection. Press Volume Up. A yellow triangle and Android logo will appear. Tap the bottom-right corner of the screen until a menu appears. Tap wipe data/factory reset then tap OK. Tap Yes then OK. it will take a minute or so for the factory reset then hit ok when done. then during the motoblur sign in press settings button and then select APN to enter a new one. try these and good luck
APN: pps
Username: annyway
Password: online
MMSC: 176.0.0.21
Proxy: 176.0.0.65:8080
and also try
Name: MI
APN: pps
Username: pps
Password: pps
and this one
APN: hspps
Username: hspps
Password: hspps

the apn type should be: default,dun,agps,tether,fota,supl. After putting the apn, you actually need to CLICK it to enable it (a dot will appear inside the circle).
You wouldn't believe how much time i wasted before figuring this out

Any news or already fixed
How u solved the problem.

hyper drive rom not automatically connecting

Hello so I've installed the hyper drive rom http://forum.xda-developers.com/showthread.php?t=2520418
Rom works beautifully and I love it. Only problem is it isn't staying connected to the network. If I go to network settings and hit choose automatically it connects and work's. Also if I'm on it for a minute or so it will connect by its self but if I just unlock the phone there's not network there. I can't figure out why thus us happening like this.
I wiped, wiped cache, wiped Dav cache then installed as instructions stated. Also installed the TWO as I'm on bell
Any ideas?

burn all said:
Hello so I've installed the hyper drive rom http://forum.xda-developers.com/showthread.php?t=2520418
Rom works beautifully and I love it. Only problem is it isn't staying connected to the network. If I go to network settings and hit choose automatically it connects and work's. Also if I'm on it for a minute or so it will connect by its self but if I just unlock the phone there's not network there. I can't figure out why thus us happening like this.
I wiped, wiped cache, wiped Dav cache then installed as instructions stated. Also installed the TWO as I'm on bell
Any ideas?
Click to expand...
Click to collapse
I have a similar problem to the above, and the hyperdrive tweaks app doesn't open for me, either.

burn all said:
Hello so I've installed the hyper drive rom http://forum.xda-developers.com/showthread.php?t=2520418
Rom works beautifully and I love it. Only problem is it isn't staying connected to the network. If I go to network settings and hit choose automatically it connects and work's. Also if I'm on it for a minute or so it will connect by its self but if I just unlock the phone there's not network there. I can't figure out why thus us happening like this.
I wiped, wiped cache, wiped Dav cache then installed as instructions stated. Also installed the TWO as I'm on bell
Any ideas?
Click to expand...
Click to collapse
I am having a similar problem. I flashed RL15, ATT comp, then modules. Everything seemed to be woking fine, but I can't connect to the internet over mobile data. Also, the mobile network comes in and out, and although I can send texts and and make calls, I can't receive either. MY GPS is working fine. I checked the APN settings, and it matches what I thought its suppose to. I can't figure it out. Maybe these issues are related... Love the ROM and really hope I can figure it out so I can continue to use it.

I also really like HD15. And I also had a ton of trouble getting it to settle down and be stable. Like you, I posted some questions. I recieved some tips and some questions never received a reply. My issues were with email mainly and a disappearing account. I tried Stock slot, slot-1 for me no difference--in fact I run it out of slot-1 as my daily driver--go figure? I installed it there by accident and it's worked every since.
Back to your problem. Unfortunately, I do not have a magic bullet. I'll just list a few things I did. 1. Be careful about debloating this one. 2. I stopped installing the add-on "S-Note" It seems everthing would be fine then I'd install that and BAM! 3. Watch what apps install to system/app. 4. And this one (I'm guessing) is really important: after a clean wipe and reboot let that thing set there for a long while! I waited at least 20 minutes! before you even breath on it!
Finally, APN Settings (remember to save) AT&T Phone, phone, http://mmsc.mobile.att.net, proxy.mobile.att.net, 80, default,mms,supl,hipri (SAVE) then delete all others.
Choose Network Mode> GSM/WCDMA/LTE (auto connect). Next, check Airplane Mode box--wait a minute then uncheck. Goto: More》About Phone》Status: check type and mobile network state (should be LTE and connected respectively) note: make sure wi-fi is off.
I hope it works. Let me know if you need clarification.
oh yeah, I'd really read up on NB1 kit kat before I took the plunge--especially with no root yet
Guedeaux said:
I am having a similar problem. I flashed RL15, ATT comp, then modules. Everything seemed to be woking fine, but I can't connect to the internet over mobile data. Also, the mobile network comes in and out, and although I can send texts and and make calls, I can't receive either. MY GPS is working fine. I checked the APN settings, and it matches what I thought its suppose to. I can't figure it out. Maybe these issues are related... Love the ROM and really hope I can figure it out so I can continue to use it.
Click to expand...
Click to collapse

numbR7 said:
Finally, APN Settings (remember to save) AT&T Phone,
I hope it works. Let me know if you need clarification.
oh yeah, I'd really read up on NB1 kit kat before I took the plunge--especially with no root yet
Click to expand...
Click to collapse
So I was dumb and used the wrong APN settings. Finally got it working and its awesome. Thanks.
I think I am just going to wait on the NB1 until a root is available. I like being able to keep my stock rom slot unmolested for now until I get more savvy in the ways of The Root. I still have not tried anything with ODIN, so until I get the courage to go that far, I am going to stick with safestrap.
Thanks, again, for all your help
---------- Post added at 12:33 PM ---------- Previous post was at 12:20 PM ----------
burn all said:
Hello so I've installed the hyper drive rom http://forum.xda-developers.com/showthread.php?t=2520418
Rom works beautifully and I love it. Only problem is it isn't staying connected to the network. If I go to network settings and hit choose automatically it connects and work's. Also if I'm on it for a minute or so it will connect by its self but if I just unlock the phone there's not network there. I can't figure out why thus us happening like this.
I wiped, wiped cache, wiped Dav cache then installed as instructions stated. Also installed the TWO as I'm on bell
Any ideas?
Click to expand...
Click to collapse
Have you figured out the problem yet? Which network are you having trouble connecting to? Data or wifi?

Guedeaux said:
So I was dumb and used the wrong APN settings. Finally got it working and its awesome. Thanks.
I think I am just going to wait on the NB1 until a root is available. I like being able to keep my stock rom slot unmolested for now until I get more savvy in the ways of The Root. I still have not tried anything with ODIN, so until I get the courage to go that far, I am going to stick with safestrap.
Thanks, again, for all your help
---------- Post added at 12:33 PM ---------- Previous post was at 12:20 PM ----------
Have you figured out the problem yet? Which network are you having trouble connecting to? Data or wifi?
Click to expand...
Click to collapse
Really glad I could help--I've been on the receiving end of help more times than I can count! LOL. BTW, I think you're waiting is a smart choice--with SS and a bunch of good guys (ROM dev, etc...) on xda we're doing pretty good right now. I would read up on Odin before you need it. Make sure to know about the different versions. It is a really, really great tool to have in your box. And if you're not scared bad becuase your phone is bricked it's really pretty simple. Have a good one...

numbR7 said:
I also really like HD15. And I also had a ton of trouble getting it to settle down and be stable. Like you, I posted some questions. I recieved some tips and some questions never received a reply. My issues were with email mainly and a disappearing account. I tried Stock slot, slot-1 for me no difference--in fact I run it out of slot-1 as my daily driver--go figure? I installed it there by accident and it's worked every since.
Back to your problem. Unfortunately, I do not have a magic bullet. I'll just list a few things I did. 1. Be careful about debloating this one. 2. I stopped installing the add-on "S-Note" It seems everthing would be fine then I'd install that and BAM! 3. Watch what apps install to system/app. 4. And this one (I'm guessing) is really important: after a clean wipe and reboot let that thing set there for a long while! I waited at least 20 minutes! before you even breath on it!
Finally, APN Settings (remember to save) AT&T Phone, phone, proxy.mobile.att.net, 80, default,mms,supl,hipri (SAVE) then delete all others.
Choose Network Mode> GSM/WCDMA/LTE (auto connect). Next, check Airplane Mode box--wait a minute then uncheck. Goto: More》About Phone》Status: check type and mobile network state (should be LTE and connected respectively) note: make sure wi-fi is off.
I hope it works. Let me know if you need clarification.
oh yeah, I'd really read up on NB1 kit kat before I took the plunge--especially with no root yet
Click to expand...
Click to collapse
humm i have the right APN settings set it GSM/WCDMA auto.
APN settings are
Name: Bell
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC: 5778154 mms.bell.ca/mms/wapenc ( i cant post links so imamge http infront of mms)
MMSC proxy: web.wireless.bell.ca
MMS port: 80
MCC: 302
MNC: 610
Authentication type: <Not set>
APN type: <Not set>
i'm going to try re flashing it with more bloatware to see if that maybe helps perhaps i stripped too much bloat ware off

also i noticed at the end of installing it said
"
file_getprop:failed to stat"/tmp/aroma/kernel.prop": No such file or directory
"
would that cause issues?

burn all said:
humm i have the right APN settings set it GSM/WCDMA auto.
APN settings are
Nam it GSM/WCDMA: Bell
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC: 5778154 mms.bell.ca/mms/wapenc ( i cant post links so imamge http infront of mms)
MMSC proxy: web.wireless.bell.ca
MMS port: 80
MCC: 302
MNC: 610
Authentication type: <Not set>
APN type: <Not set>
i'm going to try re flashing it with more bloatware to see if that maybe helps perhaps i stripped too much bloat ware off
Click to expand...
Click to collapse
I'm not familiar with those APN settings for AT&T. Check your status to see if your connected LTE becuse you have GSM/WCDMA selected. Also, I don't understand how it is that there is no "type" (I.e. default,mms,supl,hipri) must be a different animal...

numbR7 said:
I'm not familiar with those APN settings for AT&T. Check your status to see if your connected LTE becuse you have GSM/WCDMA selected. Also, I don't understand how it is that there is no "type" (I.e. default,mms,supl,hipri) must be a different animal...
Click to expand...
Click to collapse
thats what i copied off the website, on the phone under apn it says "default,supl,mms"
and i'm on bell not ATT
essentially the problem is that the phone dosent auto connect to the network for my to send messages make calls or use data, if i toggle airplane mode or tell it to automatic search for a network it connects and works fine, till it gose into standby then when it comes out its lost the connection again, the strangest thing is i still get text and phone calls normally.

burn all said:
thats what i copied off the website, on the phone under apn it says "default,supl,mms"
and i'm on bell not ATT
essentially the problem is that the phone dosent auto connect to the network for my to send messages make calls or use data, if i toggle airplane mode or tell it to automatic search for a network it connects and works fine, till it gose into standby then when it comes out its lost the connection again, the strangest thing is i still get text and phone calls normally.
Click to expand...
Click to collapse
OK. bell is a different animal. I remember someone having a similar or maybe the same problem. It was a while ago. I'll try to find it. But I might be in the dark on Bell stuff. Just for the heck of it add hipri to "type" and choose the auto connect option that includes all three (i.e. includes LTE).
I read a little about this--again, awhile ago it might have an effect as I believe it has to do with priority.

I tried that with no effect good suggestion though. It has

burn all said:
I tried that with no effect good suggestion though. It has
Click to expand...
Click to collapse
Bump for help please