Database Users

Smart dialling

Smart dialling is gone after BigStorage upgrade. Please - how can I get it back. I have installed the IntelliDialer, but it did not help...

Did you soft reset after installing?
V

Yes I did, no sign of Smart dialling...
I saw some screenshots somewhere with an options menu where you can turn smart dialing on, but I could not find such a menu...
The bigstorage is a good thing, but the smart dialling was better

afaik Smart dialing is a seperate application. I might be wrong though
Get your most recent cab here:
http://www.dmmh.nl/xda/files/sort/?device_id=1&category_id=9&submit=submit

Thank you so much. I saw your Rom indexing site before, but somehow could not find cabs for magician...
Great work!!!

many thanks dmmh, sorted my smart dialing too.
Thank you :lol:

Thanks, I went for SmartDialing_Magician_Generic_WWE_RC13.CAB
Is there anything else missing other than GPRS (i dont use it) after bigstorage?
Thanks

check out this post
hth
H4rry

thanks h4rry
i have a problem installing the file i downloaded.
i put the cab on the device and ran it from device.
i get: <the file "\windows\iacontacts.dll" is in use or is in rom...> error....
any advice on what i am doing wrong?
i run wisbar but tried it without wisbar and got same.

welcome people

@ sainthalo:
unfortunately I'm a total noob at this. So dunno the answer. But I presume you've tried soft reset and then installing the cab imediately. The cab I used was "Default_SmartDialing_Magician_RC13.CAB". This cab worked fine for me, no probs.
Other than that you'll have to wait for one of the experts round here to help you out. Sorry.
@ dmmh:

Arhh what is smart dialing?

hi dmmh,
ur link
http://www.dmmh.nl/xda/files/sort/?device_id=1&category_id=9&submit=submit
is not working. previously i remember downloading the smartdialing cab from this link. i need that cab. can u pls provide me a fresh link that works?
cheers...

Yep no luck with the link here either

[B]xHelp how do i I unlock "Sufficient System Permissions" [/B]

Hi,
I have a cingular 8525 with the default cingular ROM ( will change it later want to wait a litle while)
I am trying to install a Cab and i get this notification:
the installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions
I know this is a simple registry hack and i seen a couple but I have not seen anything specific to hermes.
Please give me a link to directions
Thank You

Here... Install this CAB to the phone

This did not help
I installed the Remove Security Cab and it installed with no problem, but when i try to install: CommButton-Toggle-Vibrate-Fix.CAB
I still get the same notification.
Thanks

Did more searching still cant solve it
I read some more posts and found that making sure processes are not running might solve the problem.
I went to memory and stoped all programs and I sitll can't install the: CommButton-Toggle-Vibrate-Fix.CAB
Are there like system processes which are not showing up in memory - running programs ? Maybe I need to get into those and stop them?
Any other sugestions?
Please point me into the right direction.
Thank You

medmenz said:
I read some more posts and found that making sure processes are not running might solve the problem.
I went to memory and stoped all programs and I sitll can't install the: CommButton-Toggle-Vibrate-Fix.CAB
Are there like system processes which are not showing up in memory - running programs ? Maybe I need to get into those and stop them?
Any other sugestions?
Please point me into the right direction.
Thank You
Click to expand...
Click to collapse
Purely on the point of running processes - these will not show up in programmes in memory (except in very broad terms). An application such as sktools will show running processes.
(I am not saying this will solve your problem though)
Mike

ok i will try getting a prog and stoping more stuff to see if i can install?
Any other sugestions?

Tried using SKtools to stop everyhing possible still cant install the CommButton-Toggle-Vibrate-Fix.CAB
Is there anyone out there that knows how to fix this problem???
Please Help
thanks

Is there a way maybe to instead of installing this cab file to do it manualy??
Can I somehow modify registry to do the same as this cab is doing?
thanks

As a general rule, if I have an "unstoppable" process, I power cycle the phone and then execute the cab without opening ANYTHING else (like the comm manager in this case). Give it a shot.

I just tried that turning it off and on and trying to install, also doing soft reset and trying to install. Nothing works as soon as I click on it in a second i get "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions."
Please tell me what else I can try??

Finaly got what I wanted
I never got the stupid cab to install, but I found a different cab which let you assign vibrate to anything ( http://www.8525software.com/)utilities so when i hold PTT button it switches to Vibrate
Thanks for all that tried to help me.

Diamond block screen while phone call

Hi all!
You sure notice that the diamond normally lock the screen after very short time while performing phone call!
please let me know how can i dismiss or reduce that operation
b.t.w
I can not record phone call with the diamond becouse every time the diamond lock during phone call the voice recording application stop working and cut the call recording when the diamond lock it self!!!
thanks!!!

you could have searched. but your new so ill be nice. welcome to xda-dev and here is what you need!

Thanks but I installed that file and didnt see any progra that I can execute, where is the executable file of the program and how can I use it?
Thanks again!

Genesis 44:12

Folks!!!!
I can not see where is the executable of that installed file!!!
please please please tell me EXACTLY how to find it
THANKS!!

alon111 said:
Folks!!!!
I can not see where is the executable of that installed file!!!
please please please tell me EXACTLY how to find it
THANKS!!
Click to expand...
Click to collapse
there's no executable, the cab probably adjusted some registry settings.
check and see (after a soft reboot) if it works when making a call...

works fine,thanks

How can I remove that application / registry if i want?

Unsuccessful Installation of NoSleep!!.cab
Why i cant install ? Easily getting message Installation of NoSleep!!.cab was unsuccessful ... Any suggestions ????

Same here
Hi all, I've got my jewel for 2 days so... thanks very much for your utstanding work.
I have the same question: It works ok, but if I need to unistall it how can I do it.
Thanks in advance for your help.

[rel][i780] More configurable HW buttons...

Hello...
A small app in attachment. It SHOULD add possibility of configuring 3 more buttons
of any WM6.1 Samsung SGH-i780...
Unfortunately, only application shortcuts may be assigned (namely no <command> commands)

any chance to change the hold red button? ive been wanting to remove the keypad lock and change it into s2u2.. so far no software can do that

patch does not work

Well, it works in my case

edited a few things in cab to allow installing.. now it works!
thanks _TB_TB_.. this is a great addition
still asking if its possible to also change the keylock on the red hold button?

None I'm aware of...yet. Patience

It's great stuff, work fine BUT
"Start Hold" is not working on my BKHE1

can't install this on my J2/I2 version i780.. something about system permission in the installer cab.

_TB_TB_ said:
Hello...
A small app in attachment. It SHOULD add possibility of configuring 3 more buttons
of any WM6.1 Samsung SGH-i780...
Unfortunately, only application shortcuts may be assigned (namely no <command> commands)
Click to expand...
Click to collapse
Good Work!

ejoya said:
edited a few things in cab to allow installing.. now it works!
thanks _TB_TB_.. this is a great addition
still asking if its possible to also change the keylock on the red hold button?
Click to expand...
Click to collapse
Hello.
Can You post that changed cab (of course with TB_TB_ premission)? I have also problem with installation (lack of permission). Maybe it`s a problem with my official I1 WM6.1 ROM?
I have found that Your CAB can be installed, but there is some conflict with RealVGA, becouse without RealVGA it instals and run properly, but after instaling RealVGA system don`t permit to install it.. Weird..

WM 6.0
How to install on WM 6.0?
Best regards.

thank u for this fantastic hacks!

never try this patch to russian layout+EFN 5.0 - cos u you will need to hardreset.

Nice Hacks
Thank you, for the hacks

I'm also getting the permission error whenever I try this. I'm using EFN's 96DPI 5.0 Standard ROM. How do we fix that? I would really love to be able to change the End Key Hold short cut to point to the regular task manager 'cause the Samsung Task Manager looks funny when used on a 96 DPI ROM.
Thanks!
*nevermind - problem solved*

Can someone please post solution for the permission problem? How did u fix it?

Author please post solution to fix permission issue.
Thx

Please Vote : http://forum.xda-developers.com/showthread.php?t=923045
and reply too ! thanks

HELP with Diamond TF3D

Okay, I put the cad file on my phone and then installed it. It wouldn't work so I deleted the tweak.xml. Now it works but when I click the tweaks tab nothing shows up. Could somebody help me fix this?
Rom version 1.10.661.41 if that helps... sry just got it today and don't really get all of this yet

cant anyone help me?

You can't expect an answer within the hour, man You are using a Diamond? What kind of cab did you install? If you have a diamond, you have TF3D (also known as Manila) preinstalled and you're not supposed to install anything...

so what where you trying to do? and can you post the link of the page that has the cab file you loaded?
we have to know more in detail you just cant say. i installed something on my car and now it wont start.
you installed a cab ( i installed something on my car )
now it wont start ( you delteded the xml file and now nothing happens )
just give us more in detail what you where trying to do. what program or cab was it and what was it for. what carrier do you have?