Related
I was installing a new rom and my laptop shut down at 98% done. Now my 8125 will only come on in boot loader. PLEASE HELP!!! ASAP
Try to reflash your current ROM, start the flashing thru the Bootloader Screen..you're still lucky you still got the bootloader UP.Hehehe
Goodluck
I'm trying that. it started to work once but then my fing laptop shut down again at 98% again. I think there is something with that rom. Now I'm trying to flash with original rom but it is telling me that it is not connected now.
Ok, try to re-download the ROM installer again..if still fails, try to load the ROM thru MiniSD, that would be the last option you got if all still fails.
ya u can try to download also a dif rom installer or try it on a dif computer
da_mayhem said:
Try to reflash your current ROM, start the flashing thru the Bootloader Screen..you're still lucky you still got the bootloader UP.Hehehe
Goodluck
Click to expand...
Click to collapse
How do you flash thru the bootloader screen ????
once u get the phone in bootloader mode by pressing the camera button and press on..plug the phone into your computer..active sync might not conect but it doesnt need to..then just flash ur phone
keith1569 said:
once u get the phone in bootloader mode by pressing the camera button and press on..plug the phone into your computer..active sync might not conect but it doesnt need to..then just flash ur phone
Click to expand...
Click to collapse
Flash it how .... Details please ... Thanks in advance ....
PURESKILLZZZ said:
Flash it how .... Details please ... Thanks in advance ....
Click to expand...
Click to collapse
Download the RUU ( ROM Update Utility ), just execute the EXE and follow instructions.
da_mayhem said:
Download the RUU ( ROM Update Utility ), just execute the EXE and follow instructions.
Click to expand...
Click to collapse
I cant flash it as phone doesnt turon on pass 1st boot screen...
PURESKILLZZZ said:
I cant flash it as phone doesnt turon on pass 1st boot screen...
Click to expand...
Click to collapse
I don't think you're in the bootloader mode when you try. The screen should be three colored and when connected to USB it should say USB at the bottom of the screen.
As mentioned before. You get to bootloader mode by pressing the camera button when turning device on.
OK, I think there's been a miscommunication.
1.) Download the RUU
2.) Get into bootloader mode (You get to bootloader mode by pressing the camera button when turning device on.)
3.) Connect your phone to your Laptop or PC
4.) Execute the EXE ON YOUR LAPTOP OR PC and follow instructions.
That's what we're trying to say. Hope it helps!
PURESKILLZZZ said:
I cant flash it as phone doesnt turon on pass 1st boot screen...
Click to expand...
Click to collapse
Remove your battery. Reinsert you battery. Holding camera button press the On button. That should put you in bootloader mode. Everytime I've been this bad (and it happens every so often with the weird ROM's I screw with) I have to use the 1.05, nothing else works.
Good luck!
Dr Puttingham said:
Remove your battery. Reinsert you battery. Holding camera button press the On button. That should put you in bootloader mode. Everytime I've been this bad (and it happens every so often with the weird ROM's I screw with) I have to use the 1.05, nothing else works.
Good luck!
Click to expand...
Click to collapse
blazoner said:
OK, I think there's been a miscommunication.
1.) Download the RUU
2.) Get into bootloader mode (You get to bootloader mode by pressing the camera button when turning device on.)
3.) Connect your phone to your Laptop or PC
4.) Execute the EXE ON YOUR LAPTOP OR PC and follow instructions.
That's what we're trying to say. Hope it helps!
Click to expand...
Click to collapse
vippie said:
I don't think you're in the bootloader mode when you try. The screen should be three colored and when connected to USB it should say USB at the bottom of the screen.
As mentioned before. You get to bootloader mode by pressing the camera button when turning device on.
Click to expand...
Click to collapse
Thanks fellas ... That was all I needed was that simple routine to get to bootloader mode...
WARNING: "MASTER CLEAR" WILL WIPE YOUR BUILT-IN STORAGE!
I am not responsible for any damage caused to your device.
What is this?:
If you see the "phone+!+computer" screen, you need this! If you deleted something you shouldn't have and can't get it back on your phone, this is probably your best bet. This is the Odin3 One-Click Downloader for restoring your phone from a completely software bricked state, or for whatever purpose you see fit to use it for. You don't have to change any settings, it is all pre-packaged and ready to go.
If this has helped you out, please consider buying me a beer!
How to use:
Download and install the correct drivers below (mac and linux don't need drivers)
Plug in your usb cable to your phone and computer
Open Odin
Enter Download Mode (see below)
Click Start
Be Patient, the first boot will take a while
How to use Master Clear:
Boot your phone up normally with usb debugging on
Click Master Clear
How to enter download mode:
Method 1ADB - from recovery or normally booted with usb debugging on)
Open a cmd prompt/console/shell
adb shell
adb reboot download
Method 2KEY COMBO)
Remove the battery, sim card, sdcard if you have one
Insert the battery
Hold Volume Up + Volume Down + Power
Method 3KEY COMBO)
Remove the battery, sim card, sdcard if you have one
Insert the battery
Hold both Volume buttons (from i9000 just down, don't touch the power button)
Plug in the USB cable and continue holding both Volume buttons
Drivers:
Windows 64bit
Windows 32bit
I897UCJF6 - Odin3 One-Click Downloader:
http://www.mediafire.com/?0w2y31maz8mdom4
http://www.multiupload.com/XAZUYNXSC1
The internal beta's are NOT one-click, please read the linked threads
UPDATE: I897UCJH2 (Internal BETA)
You can get it here
UPDATE: I897UCJH3 (Internal BETA)
You can get it here
how do u use odin? i open it, i see start and master clear.
very good question, I have no idea... I wont have my phone back for a few days.
downloading right now...
hopefully this flashes stock captivate firmware?
UPDATE: just ran it on my captivate (which was actually flashed to vibrant firmware and rooted)
it really is one-click! very convenient. just plugged in my phone in download mode.
but IT REALLY DOES WORK i'm back onto my captivate stock firmware, though it did wipe user data.
i did lose root, but... yeah. no biggy.
VERY GOOD FIND
mcvert said:
downloading right now...
hopefully this flashes stock captivate firmware?
UPDATE: just ran it on my captivate (which was actually flashed to vibrant firmware and rooted)
it really is one-click! very convenient. just plugged in my phone in download mode.
but IT REALLY DOES WORK i'm back onto my captivate stock firmware, though it did wipe user data.
i did lose root, but... yeah. no biggy.
VERY GOOD FIND
Click to expand...
Click to collapse
Awesome!! Did you have to do anything special to get it to see your phone or did you just plug it in and click start?
designgears said:
Awesome!! Did you have to do anything special to get it to see your phone or did you just plug it in and click start?
Click to expand...
Click to collapse
just plugged in and hit start! it did it all on its own.
Did it stay on "File analysis" for a long time?
NM, did a restart of Odin, it's all good now.
can u give step/step directions? i'm having issues.
1. i put in downloading mode
2. i open odin
3. i plug in usb
4. and it just stays at file analysis, nothing else happens. how long do i need to wait?
i'm using win 7 x64. i have kies installed.
Croak said:
Did it stay on "File analysis" for a long time?
Click to expand...
Click to collapse
if you're getting that, quit and unplug the phone, take out the battery so it's completely dead (and take out the sim card while you're at it)
then put back just the battery and put the phone into download mode (volume down + power)
then run odin and THEN plug in the phone. you have to do it in the right order otherwise it gets stuck on file analysis. go figure.
ok i did that..now i'm stuck. i have a computer and phone icon with a yellow sign in between. nothing happens. did i just brick my phone?? HELP (((
This should be pinned!
Thanks for this!
ok i did that..now i'm stuck. i have a computer and phone icon with a yellow sign in between. nothing happens. did i just brick my phone?? HELP (((
Click to expand...
Click to collapse
No.
If you had a messed up original Captivate install, do this:
Unplug
Remove Battery
Reinstall Battery
Hold the DOWN volume button, THEN the power button.
Should go right into Download mode
Open the Odin flasher
Plug USB in
Wait for the connection.
If you're trying to recover from having Vibrant firmware installed, it's the same, but you need to hold the VOLUME UP button instead of DOWN.
i did exactly what u said, remove battery completely, insert battery, hold down first, then press power until it powers up. i get the same issue. a black screen with a graphic that looks like this:
(phone graphic)- - - yellow sign with "!" mark - - - (computer graphic)
Dear OP,
I f*%!kin love you.
Love,
spyz
sejin said:
i did exactly what u said, remove battery completely, insert battery, hold down first, then press power until it powers up. i get the same issue. a black screen with a graphic that looks like this:
(phone graphic)- - - yellow sign with "!" mark - - - (computer graphic)
Click to expand...
Click to collapse
I had the same exact issue while trying to flash the firmware. What you need to do is make sure your phone is off. Open Odin. Attach the phone to your PC. Hold down and press power and it will boot into downloading mode. ODIN MUST BE OPEN!
As long as its attached to the PC and Odin is open it will go into downloading mode, not the picture that you are seeing.
spyz88 said:
Dear OP,
I f*%!kin love you.
Love,
spyz
Click to expand...
Click to collapse
Glad I could help!!
1. i opened odin
2. i removed/inserted battery so phone is off
now comes the problems.
1. i put the usb cable into the phone, and the black screen with computer/phone/"!" sign shows up.
2. i hold down and power, the black screen with computer/phone/"!" sign shows up.
3. i hold down and power right when i insert the usb cable, the black screen with computer/phone/"!" sign shows up.
i cannot enter downloading mode. i really appreciate your assistance, but i cannot get into the yelllow digger
well, looks like the guy with his files where they shouldnt be removed the file.
Can someone mirror it? I downloaded it at work, dont have it at home.
designgears said:
well, I did some digging around and found this...
http://homepage.mac.com/abbydog3/.Public/I897UCJF6-final-OCD-REV0.exe
It is a pre-packaged Odin3 oneclick downloader...
CONFIRMED, STOCK SAMSUNG CAPTIVATE ODIN3 ONECLICK DOWNLOADER!!
Click to expand...
Click to collapse
I tried to download it but it says the link not found or something like that....can someone please reupload it...
jhernand1102 said:
I tried to download it but it says the link not found or something like that....can someone please reupload it...
Click to expand...
Click to collapse
Ditto here. A new link would be great.
hi guys... so i don't know how i got this vibrant soooooo far gone .. im afraid i have gotten it too far...
i was doing a odin back up and odin froze!... i did nothing for hours!!!! finally i shut off the program.... the phone rebooted into a screen with a picture of a phone with a triangle then dots to a computer!!!
omg!!! so im freaking out.. anyone know if there is a way back from this?? i can't even get back into recovery mode!!
please any help will do......
there was a thread about that issue, turn off your phone, unplug the usb cord, plug the usb cord. hold vol up and vol down and the power button. it will come on but when it goes off release the power button and keep holding down the vol up and vol down. should go into auto download mode. then u can reload it via odin.
xsilvercivicx said:
hi guys... so i don't know how i got this vibrant soooooo far gone .. im afraid i have gotten it too far...
i was doing a odin back up and odin froze!... i did nothing for hours!!!! finally i shut off the program.... the phone rebooted into a screen with a picture of a phone with a triangle then dots to a computer!!!
omg!!! so im freaking out.. anyone know if there is a way back from this?? i can't even get back into recovery mode!!
please any help will do......
Click to expand...
Click to collapse
this is normal just continue to download mode as normal.
http://forum.xda-developers.com/showthread.php?t=741027
you can save your device through odin, plug your phone in to your computer and try to go into download mode may take a couple tries, and flash the stock ROM you can find on these forums
i have already tried the sequence to get it into download mode... it doesnt work... tried adb and nothing registers....
anymore ideas? looks like im going to have to do a warranty exchange.
The only way I can reliably get to download mode is: power off, remove battery, replace battery, hold both vol buttons, plug in usb. works every time though.
Sent from my SGH-T959 using XDA App
update
ok so that actually worked!!!! i pulled the battery ... pluged the usb cable in and while holding volume up and down buttons i forced the battery in.. and now its in download mode!!!!
now here is my next road block.. whenever i tried to use odin i cant get pass that file analysis part and nothing happens..
any ideas? i looked it a thread and it said to reboot my computer into safe mode and disable digital driver sig.. still not working..
ideas on how to get pass the file analysis part?
Best way for us to help you, is for you to help yourself first, educate yourself and post this in the right forum please and we would all be more than gracious to help you out
sorry
hey guys thanks for all the help and suggestions... at first i just thought i would post in a development sections for some reason that made sense to me.. and im sorry if i posted in the wrong section....
xsilvercivicx said:
ok so that actually worked!!!! i pulled the battery ... pluged the usb cable in and while holding volume up and down buttons i forced the battery in.. and now its in download mode!!!!
now here is my next road block.. whenever i tried to use odin i cant get pass that file analysis part and nothing happens..
any ideas? i looked it a thread and it said to reboot my computer into safe mode and disable digital driver sig.. still not working..
ideas on how to get pass the file analysis part?
Click to expand...
Click to collapse
are you using a .pit file? and if so is it the right 512 .pit file?
if both those are yes, delete the one on your system and re-download it.
I had this same exact problem a few weeks back Odin would hang on the pit file, just redownloaded and it worked like a charm.
and just a quick reminder of everything out for the Vibrant right now
Only stock firmware use the 'PDA' option a pit file, and re-partition
froyo firmware use the 'PDA' option and a pit file, no re-partition
JACs kernels use the 'CSC' option and no pit file, no-repartition
i have a Bell Vibrant and all the methods don't work. i tried the 3 button (remove batt,place in batt, plug USB, wait for the the ''star" to appear, hold VOL+/- and POWER and wait for the screen to turn off, release POWER, but it just goes back to recharging screen. tried it 40 times
tried the power off, remove battery, replace battery, hold both vol buttons, plug in usb. no go as well.
ANything else? I'm stuck at the boot screen (the 'S' glowing part).
This is what always works for me.
Unplug your USB from your phone
Makes sure ODIN is ready to go on your PC
Hold down the Down Volume and Power until the download screen comes on
Then plug your USB back into the phone
fire up odin
pull your battery
connect phone to pc WITH THE BATTERY OUT
hold volume up+down and power
put battery in while still holding those buttons
the screen will light up with....something. Wait for the screen to blink and then release the buttons.
You are now in download mode!
i will try those methods. Thanks.
crap, still no. just keeps showing the battery charging. i remember rescuing my htc magic so many times, but no go on this guy.....
Odin all fired up when doing this......
Deliximus said:
i will try those methods. Thanks.
crap, still no. just keeps showing the battery charging. i remember rescuing my htc magic so many times, but no go on this guy.....
Odin all fired up when doing this......
Click to expand...
Click to collapse
Did you make sure that the USB was unplugged when you used my method of holding down the volume down button and power button together until the download screen came up?
If you are familiar with ADB. You can also power your phone on and then plug in the USB and then type in the command line:
adb reboot download
to get it to reboot into download mode.
You can also use this command from the recovery console if you are able to get to it.
mesajoejoe said:
Best way for us to help you, is for you to help yourself first, educate yourself and post this in the right forum please and we would all be more than gracious to help you out
Click to expand...
Click to collapse
Dude, the Vibrant is new to us all. None like it. So dev wise its harder to explain and understand when we are used to coming from a one press method, now were using Odin, and Thor's hammer to flash our phones, which is god awful, no pun intended.
Dont flame your fellow Vibrant user cause he doesent understand the 613 steps it involves, and every other way to do so. Help the kid.
I am also in this position, just using a finger in the socket method, if its on it'l shock me, know what i mean. Just try it all. I have a feeling its getting harder and harder to brick phones because the manufacture is not retarded, they fix them right back, and ship them back out to customers who need replacements. I know this as a friend works at an AT&T shipping warehouse.
So cant we all just hit a bong, or get a long? And help?
If someone could explain all this 512PIT, PDA, and CSC, and Phone. It would help so much, sometimes a picture is worth a thousand words. Just sayin.
"Oh man, I am so high right now, i have no idea whats going on."
-Towelie
aloxotls said:
Did you make sure that the USB was unplugged when you used my method of holding down the volume down button and power button together until the download screen came up?
If you are familiar with ADB. You can also power your phone on and then plug in the USB and then type in the command line:
adb reboot download
to get it to reboot into download mode.
You can also use this command from the recovery console if you are able to get to it.
Click to expand...
Click to collapse
Yeah man, i'll try it again!! And when do I start typing (sending out the adb command) when the power turns on? Thanks.
Question is: when i press power+vol Down, the boot splashscreen comes on (Galaxy S etc etc).....
I am sorry you have a Bell Vibrant, it is a little different than my phone. I found this hope this helps
HOWTO GET INTO DOWNLOAD-MODE:
- Turn off your Phone
- Hold VOLUME DOWN + HOME Buttons
- While holding VOLUME DOWN + HOME Buttons press POWER Button until you reach Download-Mode
- Release all Buttons
I also read that some of the Bell Vibrants had their Download/Recovery mode disabled.
http://forum.xda-developers.com/showthread.php?t=754673&highlight=bell
As far as the adb command I would start as soon as it powers on. It will say "error:device not found" at first, but just keep on hitting arrow up and hitting the enter in the command window until it accepts the command.
Good Luck
I must be doing something wrong here.
I have Odin 3 1.70.
I have the .tar file JJL4 thread in the development forum.
Samsung drivers are installed.
I take out the battery, then put it back in, then hold vol+/vol- and hit power and I'm in system recovery screen.
The last entry on the phone says installing muti-CSC.
I then connect the phone to the PC and it recognizes something on Com3. I then load the tar file in the pda section of ODIN. I'm not loading the PIT file.
When I click start, odin says file analysis, then setupconnection, then nothing else happens after that.
I don't need the .pit file, right? If I use the .pit file, does that erase the programs and data that I had stored on the phone?
Help?
I had a similar problem using the same version of Odin. Then I flashed it again using Odin 1.30 and it worked fine.
Sent from my SGH-T959 using XDA App
You need to get your phone in Download Mode, not Recovery. If you see a yellow Android with a shovel, you're in Download Mode. Check out the stickies and the Vibrant Bible.
Well, all of the instructions say to hold vol+/vol- and then power. When I do that it takes me into the recovery screen.
How do I get it into the download screen then?
I have never seen this posted here or anywhere but this is how I get into download EVERY time. I also don't go into every post though lol.
With the phone off hold the volume buttons down THEN plug in the usb to the phone it will go straight to download mode. USB needs to already be plugged into PC too if that wasn't obvious.
I think the way it's actually posted though is Volume +, Home button, and Power not both volumes. I have never gotten it to work that way and I stumbled onto the above way by accident.
blizzard1017 said:
I have never seen this posted here or anywhere but this is how I get into download EVERY time. I also don't go into every post though lol.
With the phone off hold the volume buttons down THEN plug in the usb to the phone it will go straight to download mode. USB needs to already be plugged into PC too if that wasn't obvious.
I think the way it's actually posted though is Volume +, Home button, and Power not both volumes. I have never gotten it to work that way and I stumbled onto the above way by accident.
Click to expand...
Click to collapse
Wow, you think that would be in the guides somewhere.
Phone off, holding both vol+/vol- and then plugging usb cable into the phone put my in downloading mode.
Was I doing something completely wrong before? Why wasn't it going into download mode?
Thank you much!
Flashing now, fingers crossed.
Turn off your phone, plug your phone in and when you see the green charging. Hold the. Volume up and
Down keys and the power key until you see the download mode.
Ok, so ODIN succeeded. It rebooted and got hung at the S.
I went into recovery mode, cleared the cache and rebooted again and I'm still stuck at the S?
What now?!
EDIT: Went into recovery and cleared cache again and I'm back up now.
great news! now you know how to odin. but majority of the time you will have to use a back up like titanium backup or nandroid from cwm to restore your apps and stuff. when using t-backup make sure not to select missing apps plus system data cause that can cause some force closes!
Z4 mod isn't working for me on this. Should it be?
What else will root this version?
lexluthor said:
Well, all of the instructions say to hold vol+/vol- and then power. When I do that it takes me into the recovery screen.
How do I get it into the download screen then?
Click to expand...
Click to collapse
Ur doing all right but holding power its only volume don't hold power for download mode.
Sent from my SGH-T959 using XDA App
I have changed my GSII rom to 2.3.4. and would like to root the GSII again, finally I disconnect the odin, then the GSII can't reboot and the battery become very hot.
Who can help me or how can I do with my GSII? Thank you very much
kyman said:
I have changed my GSII rom to 2.3.4. and would like to root the GSII again, finally I disconnect the odin, then the GSII can't reboot and the battery become very hot.
Who can help me or how can I do with my GSII? Thank you very much
Click to expand...
Click to collapse
Try to get out the battery for 2-3 minutes, let the heat to disapear, put the batt back and power on. Hope will work
No, it doesn't work and I think the rom get problem so is there any solution? Thank you very much
kyman said:
No, it doesn't work and I think the rom get problem so is there any solution? Thank you very much
Click to expand...
Click to collapse
Well, I suggest you to try VillainROM 2.1. You will have to flash cf-root (the version of it has to be the same as the version of your current f/w), connect your phone to pc and get the VR 2.1 into your sd card then power off your phone, volume up + power + home button - do a full wipe - choose to install a zip from sd, flash villain and you will be fine..hope so. If you get stuck @ any point, you can scream for help cuz I will be here to support you mate
Forgot to get you this: http://forum.xda-developers.com/showthread.php?t=1103399 It might help you though.
The main problem right now is I can't reboot my GSII so I can't do anything now.
Do you have any suggestion?
kyman said:
The main problem right now is I can't reboot my GSII so I can't do anything now.
Do you have any suggestion?
Click to expand...
Click to collapse
Just tell me one thing: is your phone powered on and is stuck? You can't do anything? Even if you pull out the battery and get it back, wont boot or what exactly?
yes, it is power on and stuck and it can't open. I pull out the battery and put is back and it won't boot.
kyman said:
yes, it is power on and stuck and it can't open. I pull out the battery and put is back and it won't boot.
Click to expand...
Click to collapse
Try to enter download mode (volume down + power button + home button) and flash with odin a stock rom.
The main problem now is I can power on my GSII so I can't enter any download mode and recovery mode.
I don't know how to do now and please help me, thank you.
Just power off your phone. If doesn't work by the power button, pull out the battery. When the phone is powered off, press the 3 buttons same time and you will enter download mod.
Sorry for my typo mistake, now I can't power on my GS2 so I don't know how to enter to download mode
kyman said:
Sorry for my typo mistake, now I can't power on my GS2 so I don't know how to enter to download mode
Click to expand...
Click to collapse
You dont have to power on your device to enter download mode. Just push VOLUME DOWN BUTTON, POWER BUTTON and HOME BUTTON in the same time. Then, push volume down to enter odin mode. After that, connect your cable to your device and press start in odin (before that, dont forget to put the stock f/w into PDA in Odin)
My GSII still no response and I think the row is dead and can't bootup so how can I do? Tks brother
So after your flashing width odin did odin say pass or complete?
You may still be able to get into download mode but just not see it,
When you hold the key combination then plug it into odin and see if it comes
Up with the yellow box that tells your if your device is connected.
edit : so you hold power, volume down and home then you have to press up to enter download mode, after this plug it in to odin and see if you can see the phone.
There is no response after boot my phone and it hasn't say pass or complete.
Then the phone can't open again and I don't know how to do now, please help.
kyman said:
There is no response after boot my phone and it hasn't say pass or complete.
Then the phone can't open again and I don't know how to do now, please help.
Click to expand...
Click to collapse
try to press the 3 buttons for the download mode until it again .... wait up to 1-1.5 minutes, while holding the 3 keys..... if does not work,I think that the bootloader could be damaged
If the bootloader has been damaged, is there any solution? Tks
kyman said:
If the bootloader has been damaged, is there any solution? Tks
Click to expand...
Click to collapse
I hope isn't bootloader ..... if so, only to samsung service center
kyman said:
If the bootloader has been damaged, is there any solution? Tks
Click to expand...
Click to collapse
however, explain the procedure you have done well to flash the rom and what files have you used for flash rom with Odin