I was installing a new rom and my laptop shut down at 98% done. Now my 8125 will only come on in boot loader. PLEASE HELP!!! ASAP
Try to reflash your current ROM, start the flashing thru the Bootloader Screen..you're still lucky you still got the bootloader UP.Hehehe
Goodluck
I'm trying that. it started to work once but then my fing laptop shut down again at 98% again. I think there is something with that rom. Now I'm trying to flash with original rom but it is telling me that it is not connected now.
Ok, try to re-download the ROM installer again..if still fails, try to load the ROM thru MiniSD, that would be the last option you got if all still fails.
ya u can try to download also a dif rom installer or try it on a dif computer
da_mayhem said:
Try to reflash your current ROM, start the flashing thru the Bootloader Screen..you're still lucky you still got the bootloader UP.Hehehe
Goodluck
Click to expand...
Click to collapse
How do you flash thru the bootloader screen ????
once u get the phone in bootloader mode by pressing the camera button and press on..plug the phone into your computer..active sync might not conect but it doesnt need to..then just flash ur phone
keith1569 said:
once u get the phone in bootloader mode by pressing the camera button and press on..plug the phone into your computer..active sync might not conect but it doesnt need to..then just flash ur phone
Click to expand...
Click to collapse
Flash it how .... Details please ... Thanks in advance ....
PURESKILLZZZ said:
Flash it how .... Details please ... Thanks in advance ....
Click to expand...
Click to collapse
Download the RUU ( ROM Update Utility ), just execute the EXE and follow instructions.
da_mayhem said:
Download the RUU ( ROM Update Utility ), just execute the EXE and follow instructions.
Click to expand...
Click to collapse
I cant flash it as phone doesnt turon on pass 1st boot screen...
PURESKILLZZZ said:
I cant flash it as phone doesnt turon on pass 1st boot screen...
Click to expand...
Click to collapse
I don't think you're in the bootloader mode when you try. The screen should be three colored and when connected to USB it should say USB at the bottom of the screen.
As mentioned before. You get to bootloader mode by pressing the camera button when turning device on.
OK, I think there's been a miscommunication.
1.) Download the RUU
2.) Get into bootloader mode (You get to bootloader mode by pressing the camera button when turning device on.)
3.) Connect your phone to your Laptop or PC
4.) Execute the EXE ON YOUR LAPTOP OR PC and follow instructions.
That's what we're trying to say. Hope it helps!
PURESKILLZZZ said:
I cant flash it as phone doesnt turon on pass 1st boot screen...
Click to expand...
Click to collapse
Remove your battery. Reinsert you battery. Holding camera button press the On button. That should put you in bootloader mode. Everytime I've been this bad (and it happens every so often with the weird ROM's I screw with) I have to use the 1.05, nothing else works.
Good luck!
Dr Puttingham said:
Remove your battery. Reinsert you battery. Holding camera button press the On button. That should put you in bootloader mode. Everytime I've been this bad (and it happens every so often with the weird ROM's I screw with) I have to use the 1.05, nothing else works.
Good luck!
Click to expand...
Click to collapse
blazoner said:
OK, I think there's been a miscommunication.
1.) Download the RUU
2.) Get into bootloader mode (You get to bootloader mode by pressing the camera button when turning device on.)
3.) Connect your phone to your Laptop or PC
4.) Execute the EXE ON YOUR LAPTOP OR PC and follow instructions.
That's what we're trying to say. Hope it helps!
Click to expand...
Click to collapse
vippie said:
I don't think you're in the bootloader mode when you try. The screen should be three colored and when connected to USB it should say USB at the bottom of the screen.
As mentioned before. You get to bootloader mode by pressing the camera button when turning device on.
Click to expand...
Click to collapse
Thanks fellas ... That was all I needed was that simple routine to get to bootloader mode...
Related
Hi..
Yesterday, i where to flash my Touch with a new ROM. But before the flashing was done, the Touch frooze completely, and now when i power it on, it stays on the "smart mobility" screen.
So... anyone know's if it's possible to fix this or what?
Please help me
BazookaAce said:
Hi..
Yesterday, i where to flash my Touch with a new ROM. But before the flashing was done, the Touch frooze completely, and now when i power it on, it stays on the "smart mobility" screen.
So... anyone know's if it's possible to fix this or what?
Please help me
Click to expand...
Click to collapse
Better to post this in the ELF forum mate
Good luck!
Hold the red and green button down and press and hold the power/reset button on top and wait until a screen pops up.
ludester said:
Hold the red and green button down and press and hold the power/reset button on top and wait until a screen pops up.
Click to expand...
Click to collapse
I've done that. It dosn't help.. I don't think i've got a ROM in my device now.. How can i flash it then?
BazookaAce said:
I've done that. It dosn't help.. I don't think i've got a ROM in my device now.. How can i flash it then?
Click to expand...
Click to collapse
Typically you put it in bootloader mode and then reflash as normal. Are you not able to get in to bootloader mode?
blazingwolf said:
Typically you put it in bootloader mode and then reflash as normal. Are you not able to get in to bootloader mode?
Click to expand...
Click to collapse
I can on a good day.. The phone is very unstable for the moment.. But when i try to flash a new ROM from Bootloader, Active Sync can't detect the device. Is that normal?
The phone is unlocked, and it shows "USB" on the screen when i plug the USB in Bootloader..
BazookaAce said:
I can on a good day.. The phone is very unstable for the moment.. But when i try to flash a new ROM from Bootloader, Active Sync can't detect the device. Is that normal?
The phone is unlocked, and it shows "USB" on the screen when i plug the USB in Bootloader..
Click to expand...
Click to collapse
Yes. All you have said above is absolutly normal. When you see the "USB" just flash it. Have you ever flash your device before?
cronexy said:
Yes. All you have said above is absolutly normal. When you see the "USB" just flash it. Have you ever flash your device before?
Click to expand...
Click to collapse
Jepp, i have! So thank you so much! I'll keep you updated!
Hello everyone.
I have a little problem now, my phone freez at bootup.
I think i have that one that have the 3buttons disabled becous i can enter recovery mode or download mode.
I havent done anything whit my firmware more than one click root and downloaded mybackup to the phone.
Any one that can help me?
Best reg Johnny
what does it shows on screen when you phone boots up?
maybe use a camera to take a pic to show us
AllGamer said:
what does it shows on screen when you phone boots up?
maybe use a camera to take a pic to show us
Click to expand...
Click to collapse
Dont have any camera
When i bootup the phone the Samsung Galaxy S logo comes up.
After then animated S whit the sound comes, stays for a long time, then the screen becomes black. If i touch the touchbuttons they start to light but no more.
okay, then that means your phone is ON
the problem is either a bad flash, or you might just need to go into RECOVERY MODE to clean up the data, and clean up the cache
Wiki
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/Vibrant_GT-I9000M
AllGamer said:
okay, then that means your phone is ON
the problem is either a bad flash, or you might just need to go into RECOVERY MODE to clean up the data, and clean up the cache
Wiki...
Click to expand...
Click to collapse
Yeah, but thats the problem. I cant come in to Recovery mode
i have tryed and tryed but it wont bootup there
you can not enter download mode either?
try the USA version key combo
hold volume up + volume down + power
see if that helps
AllGamer said:
you can not enter download mode either?
try the USA version key combo
hold volume up + volume down + power
see if that helps
Click to expand...
Click to collapse
Dosent work, and no i cant come in to downloader either
Nothing works for me
there is maybe another hope
it will require to use a ADB on a batch file
open notepad
copy and paste this into notepad
:retry
adb.exe reboot recovery
GOTO retry
save it as
fixsgs.bat
but before you can run it, you will need to download ADB if you don't already have it
instruction are similar to this
http://forum.xda-developers.com/showpost.php?p=7538723&postcount=2
the idea is to hook up your partially disabled phone to the USB turn it on and hopefully
the looping adb.exe reboot recovery can kick in when windows detects it for a fraction of a second when you plug in the USB device.
AllGamer said:
there is maybe another hope
it will require to use a ADB on a batch file
open notepad
copy and paste this into notepad
:retry
adb.exe reboot recovery
GOTO retry
save it as
fixsgs.bat
but before you can run it, you will need to download ADB if you don't already have it
instruction are similar to this
the idea is to hook up your partially disabled phone to the USB turn it on and hopefully
the looping adb.exe reboot recovery can kick in when windows detects it for a fraction of a second when you plug in the USB device.
Click to expand...
Click to collapse
Only says Error: Device not found
****
Hello,
I got SGS from o2 same issue tried every trick mentioned on internet but still stuck at same point (After Galaxy logo then animation and S sign.... Freezeeee)
Is there any hope?
Or any other way?
Help!
I know this isnt what you wanted to hear.
But if you've tried ADB and it still comes up with Device Not Found
I'm afraid you're only hope may be to take it back to retailer and claim ELF (Early Life Failure). Tell them you were upgrading firmware and it bricked and your phone doesn't have three button boot functionality.
Good luck
agree, if you can't get into the download mode, then the only fix is to send it back to the repair shop for an exchange
I have changed my GSII rom to 2.3.4. and would like to root the GSII again, finally I disconnect the odin, then the GSII can't reboot and the battery become very hot.
Who can help me or how can I do with my GSII? Thank you very much
kyman said:
I have changed my GSII rom to 2.3.4. and would like to root the GSII again, finally I disconnect the odin, then the GSII can't reboot and the battery become very hot.
Who can help me or how can I do with my GSII? Thank you very much
Click to expand...
Click to collapse
Try to get out the battery for 2-3 minutes, let the heat to disapear, put the batt back and power on. Hope will work
No, it doesn't work and I think the rom get problem so is there any solution? Thank you very much
kyman said:
No, it doesn't work and I think the rom get problem so is there any solution? Thank you very much
Click to expand...
Click to collapse
Well, I suggest you to try VillainROM 2.1. You will have to flash cf-root (the version of it has to be the same as the version of your current f/w), connect your phone to pc and get the VR 2.1 into your sd card then power off your phone, volume up + power + home button - do a full wipe - choose to install a zip from sd, flash villain and you will be fine..hope so. If you get stuck @ any point, you can scream for help cuz I will be here to support you mate
Forgot to get you this: http://forum.xda-developers.com/showthread.php?t=1103399 It might help you though.
The main problem right now is I can't reboot my GSII so I can't do anything now.
Do you have any suggestion?
kyman said:
The main problem right now is I can't reboot my GSII so I can't do anything now.
Do you have any suggestion?
Click to expand...
Click to collapse
Just tell me one thing: is your phone powered on and is stuck? You can't do anything? Even if you pull out the battery and get it back, wont boot or what exactly?
yes, it is power on and stuck and it can't open. I pull out the battery and put is back and it won't boot.
kyman said:
yes, it is power on and stuck and it can't open. I pull out the battery and put is back and it won't boot.
Click to expand...
Click to collapse
Try to enter download mode (volume down + power button + home button) and flash with odin a stock rom.
The main problem now is I can power on my GSII so I can't enter any download mode and recovery mode.
I don't know how to do now and please help me, thank you.
Just power off your phone. If doesn't work by the power button, pull out the battery. When the phone is powered off, press the 3 buttons same time and you will enter download mod.
Sorry for my typo mistake, now I can't power on my GS2 so I don't know how to enter to download mode
kyman said:
Sorry for my typo mistake, now I can't power on my GS2 so I don't know how to enter to download mode
Click to expand...
Click to collapse
You dont have to power on your device to enter download mode. Just push VOLUME DOWN BUTTON, POWER BUTTON and HOME BUTTON in the same time. Then, push volume down to enter odin mode. After that, connect your cable to your device and press start in odin (before that, dont forget to put the stock f/w into PDA in Odin)
My GSII still no response and I think the row is dead and can't bootup so how can I do? Tks brother
So after your flashing width odin did odin say pass or complete?
You may still be able to get into download mode but just not see it,
When you hold the key combination then plug it into odin and see if it comes
Up with the yellow box that tells your if your device is connected.
edit : so you hold power, volume down and home then you have to press up to enter download mode, after this plug it in to odin and see if you can see the phone.
There is no response after boot my phone and it hasn't say pass or complete.
Then the phone can't open again and I don't know how to do now, please help.
kyman said:
There is no response after boot my phone and it hasn't say pass or complete.
Then the phone can't open again and I don't know how to do now, please help.
Click to expand...
Click to collapse
try to press the 3 buttons for the download mode until it again .... wait up to 1-1.5 minutes, while holding the 3 keys..... if does not work,I think that the bootloader could be damaged
If the bootloader has been damaged, is there any solution? Tks
kyman said:
If the bootloader has been damaged, is there any solution? Tks
Click to expand...
Click to collapse
I hope isn't bootloader ..... if so, only to samsung service center
kyman said:
If the bootloader has been damaged, is there any solution? Tks
Click to expand...
Click to collapse
however, explain the procedure you have done well to flash the rom and what files have you used for flash rom with Odin
To Force the Phone into Download mode Without a USB Jig, Just Pull The Battery,
Press VOL up+Cam+Power on, Holding the keys pressed, Insert The battery. The phone will be forced to boot into download mode,and you will be able to see the Yellow triangle with the Exclamation Mark. Then you can go ahead and flash.
great,
this seams to be a very valuable piece of information,
will keep it just in case
many thanks for sharing
^^ You're Welcome!!
^^ You're Welcome!!
micki9559 said:
To Force the Phone into Download mode Without a USB Jig, Just Pull The Battery,
Press VOL up+Cam+Power on, Holding the keys pressed, Insert The battery. The phone will be forced to boot into download mode,and you will be able to see the Yellow triangle with the Exclamation Mark. Then you can go ahead and flash.
Click to expand...
Click to collapse
Cumbersome to achieve, but confirmed.
Thanks, the info goes on the wiki!
EnderPsp said:
Cumbersome to achieve, but confirmed.
Thanks, the info goes on the wiki!
Click to expand...
Click to collapse
That would be great!! Hope To Help as many people as possible. Surefire Way of forcing it into download mode. But my phone is still DEAD!! Help Needed...
Check my other Thread.
micki9559 said:
That would be great!! Hope To Help as many people as possible. Surefire Way of forcing it into download mode. But my phone is still DEAD!! Help Needed...
Check my other Thread.
Click to expand...
Click to collapse
Did you tried the goldcard method,
here is a link for the best and easiest way to do it
http://forum.xda-developers.com/showthread.php?t=1597837
give it a try, I'm optimistic for possitive results
but don't forget to use samsung stuffs instead of htc
good luck
micki9559 said:
To Force the Phone into Download mode Without a USB Jig, Just Pull The Battery,
Press VOL up+Cam+Power on, Holding the keys pressed, Insert The battery. The phone will be forced to boot into download mode,and you will be able to see the Yellow triangle with the Exclamation Mark. Then you can go ahead and flash.
Click to expand...
Click to collapse
Will this work on LG Optimus G ?
Should work.
alexthelionheart99 said:
Will this work on LG Optimus G ?
Click to expand...
Click to collapse
Should work for any windows phone 7 upto 7.5 devices, Tested on my LG quantum as working.
micki9559 said:
Should work for any windows phone 7 upto 7.5 devices, Tested on my LG quantum as working.
Click to expand...
Click to collapse
even f it is hard bricked ?
alexthelionheart99 said:
even f it is hard bricked ?
Click to expand...
Click to collapse
Are you tested with your LG Optimus G?
not working
micki9559 said:
To Force the Phone into Download mode Without a USB Jig, Just Pull The Battery,
Press VOL up+Cam+Power on, Holding the keys pressed, Insert The battery. The phone will be forced to boot into download mode,and you will be able to see the Yellow triangle with the Exclamation Mark. Then you can go ahead and flash.
Click to expand...
Click to collapse
well I flashed a dsixda rom... basically stock rom redone a few things now my device shuts down after Samsung logo n cant boot into download mode or recovery...
johnanne said:
Are you tested with your LG Optimus G?
Click to expand...
Click to collapse
Yeah it didn't work on mine . I contacted At&t and played dumb saying that I was downloading flappy bird and then the phone turned off. they sand me a new one after a week. I successfully rooted and Unlocked the phone the next day I recived it.
What Is CAM button exactly? Thanks.
i cant switch on my samsung gt-s7392 mobile bcoz one time when i am doing flash via odin at that time re-partition option is checked so mobile just off since that time can you please help me to switch on it
hello i am from chile, so my english it's not the best
I accidentally installed a firmware to L7 on my L5 (e612) this are the problems:
- the screen goes white (its always "in" white)
the phone reset ramdomly so i cant use the kdz or the LG support tool (when the programs are looking for the phone it resets)
and also i cant get in to download mode.
PLEASE HELP ME!!!!
You tried a hard reset ? (-) and power button ?
And for the download mode you tried with more ports from your pc? I ask because i had this problem on my device, i couldn`t ente rin download mode because of my port from pc.
If you can go in download mode just install another kdz and all will be fine, but install a good one.
Sabyn said:
You tried a hard reset ? (-) and power button ?
And for the download mode you tried with more ports from your pc? I ask because i had this problem on my device, i couldn`t ente rin download mode because of my port from pc.
If you can go in download mode just install another kdz and all will be fine, but install a good one.
Click to expand...
Click to collapse
i tried that, and every 1 minute mi cellphone reset by it self, so i the program don't have the necesary time to recognize the phone and fix it.
i cant get in to dowload mode. hard reset doesn't work.
diegfire said:
i tried that, and every 1 minute mi cellphone reset by it self, so i the program don't have the necesary time to recognize the phone and fix it.
i cant get in to dowload mode. hard reset doesn't work.
Click to expand...
Click to collapse
I had the same problem,Solved it with removin the battery,then put back on.Next i pluged the USB n then ive pressed vol down n power button n i was in download mode.But it took me to another problem.I had instaled custom JB n when the download finished it stayed on that custom ROM.The problem is that my phone is not rooted now and i cant get into CWM.Rooting tools doesnt work so idk what to do next.
bokimm said:
I had the same problem,Solved it with removin the battery,then put back on.Next i pluged the USB n then ive pressed vol down n power button n i was in download mode.But it took me to another problem.I had instaled custom JB n when the download finished it stayed on that custom ROM.The problem is that my phone is not rooted now and i cant get into CWM.Rooting tools doesnt work so idk what to do next.
Click to expand...
Click to collapse
you have e610? because i can give you a nice version of JB, pre rooted and without the useless apps
Sabyn said:
you have e610? because i can give you a nice version of JB, pre rooted and without the useless apps
Click to expand...
Click to collapse
Problem is i dont have root and CWM recovery.How can i flash it?
bokimm said:
Problem is i dont have root and CWM recovery.How can i flash it?
Click to expand...
Click to collapse
you can flash in download mode with the kdz updater
Sabyn said:
you can flash in download mode with the kdz updater
Click to expand...
Click to collapse
can i have the JB?
eeintd hath
the biggest problem: when i turn on the phone its that the screen don't show me anything,looks all white whit and a black frange downside, and it reset like every 1 minute
@Sabyn I found the JB n flashed it,flashed CWM and all is gd n runnin ty bro.
diegfire said:
the biggest problem: when i turn on the phone its that the screen don't show me anything,looks all white whit and a black frange downside, and it reset like every 1 minute
Click to expand...
Click to collapse
reflash the software
Sabyn said:
reflash the software
Click to expand...
Click to collapse
i cant do that because the cellphone reset, and y cant get in to download mode, also the screen its all white, i cant see anithing, i just listen the music of LG boot
take ur battery off,put it back on,hold volume down n plug the USB in,that worked for me.then u shud be in download mode.start KDZ n set it up n click start download
Sent from my LG-E610 using xda app-developers app
yeah, be sure you take out the battery, wait a few seconds and after put it again, after hold + and - and plug the usb to phone ( which is already connected to pc) and it will enter in download mode, after flash the kdz
Sabyn said:
yeah, be sure you take out the battery, wait a few seconds and after put it again, after hold + and - and plug the usb to phone ( which is already connected to pc) and it will enter in download mode, after flash the kdz
Click to expand...
Click to collapse
he can enter in download mode only with holdin volume down and plug in USB
bokimm said:
he can enter in download mode only with holdin volume down and plug in USB
Click to expand...
Click to collapse
nop , that is a hard reset, for download mode you need to hold both + and -
Sabyn said:
nop , that is a hard reset, for download mode you need to hold both + and -
Click to expand...
Click to collapse
Hmm.I got in download mode only with vol down,why is so diffrent from one device to another device?
EDIT: With vol+ n vol- m gettin into fastboot i guess
https://www.dropbox.com/s/bemrahs8kn1c3i4/CAM00006.jpg
diegfire said:
i cant do that because the cellphone reset, and y cant get in to download mode, also the screen its all white, i cant see anithing, i just listen the music of LG boot
Click to expand...
Click to collapse
Did you try emergency mode? (volume up + volume down + power button)
If not, turn off your phone and unplug it. Then enter emergency mode as described. Then wait 1-2 minutes to see if your phone is restarting. If not, continue flashing with Software update [KDZ] 1.0.4.4 (KDZ-Flasher).
hi.. i have install the cyanogenmod 10... after that the device don't read the sim. I search on the internet how to fix it and resut that I have to flash v10 baseband. I flash it and now the phone don't enter in download mode and kdz don't identify it..it has a white screen.. how can I fix it? help me please : Pianto:: Pianto:
sergioarce1 said:
hi.. i have install the cyanogenmod 10... after that the device don't read the sim. I search on the internet how to fix it and resut that I have to flash v10 baseband. I flash it and now the phone don't enter in download mode and kdz don't identify it..it has a white screen.. how can I fix it? help me please : Pianto:: Pianto:
Click to expand...
Click to collapse
go in cwm, flash again cm, and btw, if is cm10.1 or .2, you need to flash v20baseband