I must be doing something wrong here.
I have Odin 3 1.70.
I have the .tar file JJL4 thread in the development forum.
Samsung drivers are installed.
I take out the battery, then put it back in, then hold vol+/vol- and hit power and I'm in system recovery screen.
The last entry on the phone says installing muti-CSC.
I then connect the phone to the PC and it recognizes something on Com3. I then load the tar file in the pda section of ODIN. I'm not loading the PIT file.
When I click start, odin says file analysis, then setupconnection, then nothing else happens after that.
I don't need the .pit file, right? If I use the .pit file, does that erase the programs and data that I had stored on the phone?
Help?
I had a similar problem using the same version of Odin. Then I flashed it again using Odin 1.30 and it worked fine.
Sent from my SGH-T959 using XDA App
You need to get your phone in Download Mode, not Recovery. If you see a yellow Android with a shovel, you're in Download Mode. Check out the stickies and the Vibrant Bible.
Well, all of the instructions say to hold vol+/vol- and then power. When I do that it takes me into the recovery screen.
How do I get it into the download screen then?
I have never seen this posted here or anywhere but this is how I get into download EVERY time. I also don't go into every post though lol.
With the phone off hold the volume buttons down THEN plug in the usb to the phone it will go straight to download mode. USB needs to already be plugged into PC too if that wasn't obvious.
I think the way it's actually posted though is Volume +, Home button, and Power not both volumes. I have never gotten it to work that way and I stumbled onto the above way by accident.
blizzard1017 said:
I have never seen this posted here or anywhere but this is how I get into download EVERY time. I also don't go into every post though lol.
With the phone off hold the volume buttons down THEN plug in the usb to the phone it will go straight to download mode. USB needs to already be plugged into PC too if that wasn't obvious.
I think the way it's actually posted though is Volume +, Home button, and Power not both volumes. I have never gotten it to work that way and I stumbled onto the above way by accident.
Click to expand...
Click to collapse
Wow, you think that would be in the guides somewhere.
Phone off, holding both vol+/vol- and then plugging usb cable into the phone put my in downloading mode.
Was I doing something completely wrong before? Why wasn't it going into download mode?
Thank you much!
Flashing now, fingers crossed.
Turn off your phone, plug your phone in and when you see the green charging. Hold the. Volume up and
Down keys and the power key until you see the download mode.
Ok, so ODIN succeeded. It rebooted and got hung at the S.
I went into recovery mode, cleared the cache and rebooted again and I'm still stuck at the S?
What now?!
EDIT: Went into recovery and cleared cache again and I'm back up now.
great news! now you know how to odin. but majority of the time you will have to use a back up like titanium backup or nandroid from cwm to restore your apps and stuff. when using t-backup make sure not to select missing apps plus system data cause that can cause some force closes!
Z4 mod isn't working for me on this. Should it be?
What else will root this version?
lexluthor said:
Well, all of the instructions say to hold vol+/vol- and then power. When I do that it takes me into the recovery screen.
How do I get it into the download screen then?
Click to expand...
Click to collapse
Ur doing all right but holding power its only volume don't hold power for download mode.
Sent from my SGH-T959 using XDA App
Related
Well I've had my Vibrant for about a month now but have not been in a rush to root because there aren't really any ROMS available yet. I've donated so I'm excited to see what comes about. Any way I decided to go ahead and root today because frankly the bloatware was getting on my nerves. So I rooted the phone basically just flashing the upsate.zip and then flashing recovery via rom manager. Now I'm a bit frustrated because immediately after rooting:
1. My Vibrant is laggy as all hell!
2. Google apps crashes repeatedly
3. My damn market no longer works! Can't download apps via market anymore
4. My Sync is now broken, it says synced but definitely does not sync anything any time anymore.
What gives? Others have obviously had no problems and I'm certain I didn't do anything wrong, I've been rooting and flashing since the days of G1 and have had a Mytouch and most recently a Nexus One. I'm not fantastically versed but I'm no n00b all the same.
Also what's up with the radio? My phone rings and the ringer is low then a few seconds later gets loud also the delay between the time I dial a number and the number rings is pretty big, I've taken two phones and called one to check.
Any way I'm frustrated and unroot is not working, I attempted to unroot but yet remain rooted with all the same headaches.
Some help would be appreciated.
Go ahead and use odin to get back to stock. Yes you will lose your data.
http://forum.xda-developers.com/showthread.php?t=734475
You should be back to stock at this point. Then use this file to get root.
http://forum.xda-developers.com/showthread.php?t=723479
There really isnt much else to do. You dont even need the recovery, yet, but use clockwork through market to get it. Choosing Vibrant as the recovery option. Download the busybox app from market to get the newest one.
unfortunately my phone does not boot into download mode. I've tried holding volume down and power, no dice it just boots up normally. ive also tried holding volume up and power to the same result....And I don't know of any other way to use Odin without download mode. After rooting my phone nothing works properly.
justanothergirl said:
unfortunately my phone does not boot into download mode. I've tried holding volume down and power, no dice it just boots up normally. ive also tried holding volume up and power to the same result....And I don't know of any other way to use Odin without download mode. After rooting my phone nothing works properly.
Click to expand...
Click to collapse
You have to hold volume up and down while holding power. Once the screen goes black release power and continue holding volume up and volume down.
Your other option is with adb to do "adb reboot download" and it will reboot into download mode.
Once you get the hang of holding the volume up and down it's a piece of cake.
try installing one of eugene's ROMs through Clockwork, and see if that fix's anything.
Make sure you have the samsung drivers installed on your computer.
Odin can be tricky, here's my sure fire way that i get into Odin every single time.
DO NOT HAVE YOUR USB PLUGGED IN YET
1) Start odin load your .pit file and rom into PDA
2) Go into stock recovery
3) Now plug in the USB cable, Odin should recognize a phone is connected
4) In recovery select Reboot System
5) Immediately press the Volume Up/Down Button all the way in, (2 clicks)
6) should load the yellow triangle and say download mode plus Odin should recognize it immediately
Okie doke, thanks guys, I went ahead and used Odin to return to get back to stock so I'm going to just root again, I have no idea why things got so screwed up when I rooted and flashed before. Getting into download mode was annoying but this is what worked for me:
1. Turn off phone
2. Plug USB in
3. Wait for green charging screen
3. Hold Volume Up, Volume down, and Power.
5. Let go of power as soon as the screen goes black.
Open Odin and load files then hit start....and back to stock I went.
Thanks again!
hi guys... so i don't know how i got this vibrant soooooo far gone .. im afraid i have gotten it too far...
i was doing a odin back up and odin froze!... i did nothing for hours!!!! finally i shut off the program.... the phone rebooted into a screen with a picture of a phone with a triangle then dots to a computer!!!
omg!!! so im freaking out.. anyone know if there is a way back from this?? i can't even get back into recovery mode!!
please any help will do......
there was a thread about that issue, turn off your phone, unplug the usb cord, plug the usb cord. hold vol up and vol down and the power button. it will come on but when it goes off release the power button and keep holding down the vol up and vol down. should go into auto download mode. then u can reload it via odin.
xsilvercivicx said:
hi guys... so i don't know how i got this vibrant soooooo far gone .. im afraid i have gotten it too far...
i was doing a odin back up and odin froze!... i did nothing for hours!!!! finally i shut off the program.... the phone rebooted into a screen with a picture of a phone with a triangle then dots to a computer!!!
omg!!! so im freaking out.. anyone know if there is a way back from this?? i can't even get back into recovery mode!!
please any help will do......
Click to expand...
Click to collapse
this is normal just continue to download mode as normal.
http://forum.xda-developers.com/showthread.php?t=741027
you can save your device through odin, plug your phone in to your computer and try to go into download mode may take a couple tries, and flash the stock ROM you can find on these forums
i have already tried the sequence to get it into download mode... it doesnt work... tried adb and nothing registers....
anymore ideas? looks like im going to have to do a warranty exchange.
The only way I can reliably get to download mode is: power off, remove battery, replace battery, hold both vol buttons, plug in usb. works every time though.
Sent from my SGH-T959 using XDA App
update
ok so that actually worked!!!! i pulled the battery ... pluged the usb cable in and while holding volume up and down buttons i forced the battery in.. and now its in download mode!!!!
now here is my next road block.. whenever i tried to use odin i cant get pass that file analysis part and nothing happens..
any ideas? i looked it a thread and it said to reboot my computer into safe mode and disable digital driver sig.. still not working..
ideas on how to get pass the file analysis part?
Best way for us to help you, is for you to help yourself first, educate yourself and post this in the right forum please and we would all be more than gracious to help you out
sorry
hey guys thanks for all the help and suggestions... at first i just thought i would post in a development sections for some reason that made sense to me.. and im sorry if i posted in the wrong section....
xsilvercivicx said:
ok so that actually worked!!!! i pulled the battery ... pluged the usb cable in and while holding volume up and down buttons i forced the battery in.. and now its in download mode!!!!
now here is my next road block.. whenever i tried to use odin i cant get pass that file analysis part and nothing happens..
any ideas? i looked it a thread and it said to reboot my computer into safe mode and disable digital driver sig.. still not working..
ideas on how to get pass the file analysis part?
Click to expand...
Click to collapse
are you using a .pit file? and if so is it the right 512 .pit file?
if both those are yes, delete the one on your system and re-download it.
I had this same exact problem a few weeks back Odin would hang on the pit file, just redownloaded and it worked like a charm.
and just a quick reminder of everything out for the Vibrant right now
Only stock firmware use the 'PDA' option a pit file, and re-partition
froyo firmware use the 'PDA' option and a pit file, no re-partition
JACs kernels use the 'CSC' option and no pit file, no-repartition
i have a Bell Vibrant and all the methods don't work. i tried the 3 button (remove batt,place in batt, plug USB, wait for the the ''star" to appear, hold VOL+/- and POWER and wait for the screen to turn off, release POWER, but it just goes back to recharging screen. tried it 40 times
tried the power off, remove battery, replace battery, hold both vol buttons, plug in usb. no go as well.
ANything else? I'm stuck at the boot screen (the 'S' glowing part).
This is what always works for me.
Unplug your USB from your phone
Makes sure ODIN is ready to go on your PC
Hold down the Down Volume and Power until the download screen comes on
Then plug your USB back into the phone
fire up odin
pull your battery
connect phone to pc WITH THE BATTERY OUT
hold volume up+down and power
put battery in while still holding those buttons
the screen will light up with....something. Wait for the screen to blink and then release the buttons.
You are now in download mode!
i will try those methods. Thanks.
crap, still no. just keeps showing the battery charging. i remember rescuing my htc magic so many times, but no go on this guy.....
Odin all fired up when doing this......
Deliximus said:
i will try those methods. Thanks.
crap, still no. just keeps showing the battery charging. i remember rescuing my htc magic so many times, but no go on this guy.....
Odin all fired up when doing this......
Click to expand...
Click to collapse
Did you make sure that the USB was unplugged when you used my method of holding down the volume down button and power button together until the download screen came up?
If you are familiar with ADB. You can also power your phone on and then plug in the USB and then type in the command line:
adb reboot download
to get it to reboot into download mode.
You can also use this command from the recovery console if you are able to get to it.
mesajoejoe said:
Best way for us to help you, is for you to help yourself first, educate yourself and post this in the right forum please and we would all be more than gracious to help you out
Click to expand...
Click to collapse
Dude, the Vibrant is new to us all. None like it. So dev wise its harder to explain and understand when we are used to coming from a one press method, now were using Odin, and Thor's hammer to flash our phones, which is god awful, no pun intended.
Dont flame your fellow Vibrant user cause he doesent understand the 613 steps it involves, and every other way to do so. Help the kid.
I am also in this position, just using a finger in the socket method, if its on it'l shock me, know what i mean. Just try it all. I have a feeling its getting harder and harder to brick phones because the manufacture is not retarded, they fix them right back, and ship them back out to customers who need replacements. I know this as a friend works at an AT&T shipping warehouse.
So cant we all just hit a bong, or get a long? And help?
If someone could explain all this 512PIT, PDA, and CSC, and Phone. It would help so much, sometimes a picture is worth a thousand words. Just sayin.
"Oh man, I am so high right now, i have no idea whats going on."
-Towelie
aloxotls said:
Did you make sure that the USB was unplugged when you used my method of holding down the volume down button and power button together until the download screen came up?
If you are familiar with ADB. You can also power your phone on and then plug in the USB and then type in the command line:
adb reboot download
to get it to reboot into download mode.
You can also use this command from the recovery console if you are able to get to it.
Click to expand...
Click to collapse
Yeah man, i'll try it again!! And when do I start typing (sending out the adb command) when the power turns on? Thanks.
Question is: when i press power+vol Down, the boot splashscreen comes on (Galaxy S etc etc).....
I am sorry you have a Bell Vibrant, it is a little different than my phone. I found this hope this helps
HOWTO GET INTO DOWNLOAD-MODE:
- Turn off your Phone
- Hold VOLUME DOWN + HOME Buttons
- While holding VOLUME DOWN + HOME Buttons press POWER Button until you reach Download-Mode
- Release all Buttons
I also read that some of the Bell Vibrants had their Download/Recovery mode disabled.
http://forum.xda-developers.com/showthread.php?t=754673&highlight=bell
As far as the adb command I would start as soon as it powers on. It will say "error:device not found" at first, but just keep on hitting arrow up and hitting the enter in the command window until it accepts the command.
Good Luck
So I tried Odin and was going back to stock. Odin was going for over an hour and no progress was being shown. So what I read is to restart the process. So I took out the battery and went to get into Download Mode again. So my guess is the something was actually still writing even after an hour...or Odin wrote something bad at the beginning and then died.
Well now my phone only goes to the Screen showing a Phone --- ! ---- Computer. I have tried many tricks listed on this site. Take out the battery, hookup the USB, hold down up and down volume, and then put the battery back in...nothing. Tried many things like this.
ADB doesn't see the device.
Any thoughts?
Umbricking
If you can get into samsung recovery try wiping user data.
AaronMFeld said:
If you can get into samsung recovery try wiping user data.
Click to expand...
Click to collapse
For the Vibrant is that up+down+power? I have tried so many combos.
Thanks.
Take Out The USB Cord
Hold The Volume Up And Down Buttons
Plug In USB While Holding The Buttons
If You See Download Mode Again
Restart ODIN
Erickomen27 said:
Take Out The USB Cord
Hold The Volume Up And Down Buttons
Plug In USB While Holding The Buttons
If You See Download Mode Again
Restart ODIN
Click to expand...
Click to collapse
Still have the Phone --!-- PC image only. Comes right up immediately.
Try
1) pull the battery
2) plug in micro usb
3) hold down both vol buttons
4) pop in battery
I am having the exact same problem. When I tried to odin back to stock, it got stuck on cache.rfs. So i took out the battery, and get back into download mode, , but odin didn't see the phone after I plug the USB back in. So i restart odin, and it assign a com port. When I click start after specifying the pit and tar file. It would just get stuck at cache.rfs again.
I am not able to get into recovery, and I just see the <computer ! phone>. or I can get into download mode with the key combinations. but odin wouldn't flash, and i can't boot regularly. Please help.
This is happened to me as well. I was trying for hours to get ODIN to flash the tar file but it would either freeze or fail. Eventually I tried another computer and started from scratch by downloading the USB Drivers, ODIN, the PIT and TAR file again. In my case it turned out to be my computer, using another computer successfully flashed teh stock rom and later the manual ota update.
Is Your Vibrant Hardware Locked?
Sounds Like it, If It Is, Your Screwed..Sorry
nvm, i finally got it to flashed back to stock. it wouldn't work until I finally found the odin v1.52. it flashed as soon as I use that version of odin. btw..I don't think mine is hardware locked, since i am normally able to get into recovery or download mode by using the key combination. Thanks
Moving up from an Eris to the Fascinate. Rooted the phone successfully via reboot, SuperUser Icon.
Went to install Clockworkmod, put phone in Download mode, ran Odin said failed first try so I tried it again, didn't attempt to install clockwork phone rebooted and immediately went to the phone, triangle pc icon (bad right).
So I can't get the phone back into download mode. I can only get recover via battery pull, plug in usb cable, power on phone and then hold up volume and power button and I'll get to recovery. Reboot in recovery does nothing, update.zip comes up with an error and factory reset and clear cache do nothing. PC will not recognize phone via USB so I don't know what to do...
$20 Paypal to the first poster that can get me back on track. Detailed instructions/ideas please.
TIA
Have you tried the same steps that you use to get into recovery, but with the down volume button instead?
Sent from my SCH-I500 with Dirrk's LV 1250 voodoo lagfix installed.
Yes, it goes from the battery charging Icon (once I first plug it into the usb and power on).
If I hold up volume and power it goes to recovery.
If i hold down volume and power it goes to phone, triangle, pc icons.
Hokay.
Pull your battery and usb cable.
Leave your battery out.
Hold DOWN VOLUME and plug in usb cable, while odin is running in background.
Welcome to download mode.
Insert battery.
Continue with Odin madness.
OK, that worked, now my PC is recognizing the device a serial item and it's not coming up in Odin?
re-open odin.
Nothing still, feels like a PC, driver issue now....
tmoneyr007 said:
Nothing still, feels like a PC, driver issue now....
Click to expand...
Click to collapse
32-bit = wikifilez (replace with .com) /root%20files/epic4g/SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
64-bit = wikifilez (replace with .com) /root%20files/epic4g/usb_drivers_GalaxyS_x64.zip
As you have obviously had it working before, have tried restarting your computer....can you use adb when in recovery mode?
I got you back to download mode, what do I win
Whats the update after rebooting?
adrynalyne said:
I got you back to download mode, what do I win
Click to expand...
Click to collapse
I'm all good, rooted, clockwork, super clean rom. Thanks Forum
Beer money in your Paypal, I honor my offers!
Thanks
You need to post what fixed your problem so others can be helped in the future
Tried a friends computer, installed 32 bit drivers (my PC is Win 7 64bit and it didn't like recongizing the phone).
Run Odin
Pull Battery
Hold Down Volume button
Plug-In USB Cable
Download mode began
Installed Battery
Ran clockwork via Odin PDA
Installed, rebooted correctly
Happy Ending, Beer money for the help and I got my phone squared away!
Just for future reference, if you have the correct drivers installed win7 64 bit works fine....that is what I have as welll...glad you got it
adrynalyne said:
I got you back to download mode, what do I win
Click to expand...
Click to collapse
Victory!!!!
I had this problem before. Odin didnt want to do its job if I put the phone in download mode with the data cable plugged in.
You could try unplugging the data cable.
Pull the battery.
Put the battery back in.
Hold volume down and do a short press of power maybe like 1 second long.
wait till it goes into download mode.
Open Odin.
Plug in phone.
That should work. It would fail every time for me if I didnt do those steps.
Hope it helps!
Sent from my SCH-I500 using XDA App
guys my phone had that triangle of death, but after doing the instructions here i got it into download mode and downloaded all the files from the odin thread and did the reset and now it's just stuck at the samsung screen flashing over and over... can someone help me?
itzjonjon69 said:
guys my phone had that triangle of death, but after doing the instructions here i got it into download mode and downloaded all the files from the odin thread and did the reset and now it's just stuck at the samsung screen flashing over and over... can someone help me?
Click to expand...
Click to collapse
Did you use odin3 one click back to stock?....if so either flash again or download again. Sometimes things get corrupted.
newter55 said:
Did you use odin3 one click back to stock?....if so either flash again or download again. Sometimes things get corrupted.
Click to expand...
Click to collapse
i used odin3, i re downloaded everything like 5x's and its still stuck on the samsung screen and just reboots over and over... I think i really ****ed this one up :/ called verizon should get a replacement here tomorrow
yes I majorly effed up. installed a rom or at least attempted to. Rbooted device then got thrown into the endless boot and reboot mode. powered off device then back on. same deal. put my phone into download mode by pressing the volume up and down combo and it worked. okay went into odin and went to flash and effed up once again. now Im stuck on the |PHONE--/!\--PC| logo. read up on all posts in here about it people have had success but i am not one of them. my phone isnt hardware locked since I was able to get into download mode via key the three key press. what on earth have i done? shoul I call it in and have it replaced or try something elese. oh and wehen I plug my phone into pc it downloads th drivers it needed but doesnt show as connected. ugh what am I doing wrong?
The phone pc logo is the download mode. Odin away back to stock. Just press start on Odin.
how? which buttons should I nnot check off and how to i flash to stock? im a effen noob and played with fire when I shouldnt have
odin will not detect my phone.
jaquaslife said:
odin will not detect my phone.
Click to expand...
Click to collapse
1. Power your phone off all the way.
2. Unplug the cable.
3. Fire up ODIN (as admin if you have vista/7)
4. Hold vol. up and down, and plug USB into phone.
5. ODIN should now detect your phone, and you will be in download mode.
Longcat14 said:
1. Power your phone off all the way.
2. Unplug the cable.
3. Fire up ODIN (as admin if you have vista/7)
4. Hold vol. up and down, and plug USB into phone.
5. ODIN should now detect your phone, and you will be in download mode.
Click to expand...
Click to collapse
Plus pull the battery and take out the sim and the sd card then do the above Read up on the sticky in the Gen section S15274N did the posting has all the info for you there
i did get back in AND ROOTED WITH BIONIX 1.3.1.
jaquaslife said:
i did get back in AND ROOTED WITH BIONIX 1.3.1.
Click to expand...
Click to collapse
First time that happened to all of us, I'm sure we all freaked out for a bit, but now you know how to pretty much fix any soft brick, not so scary now.
This phone is damn near impossible to brick...glad things worked out!
I was up till 330 am. Was definetly a scare. But thanks for the help now off to enjoy it
Sent from my SGH-T959 using XDA Premium App