[Q] Need Calibration Data For HTC Jade 100 (T3232) - Touch 3G General

Hi,
i have HTC Jade 10 (t3232) with me from last three weeks i am having some touch screen (Calibration) issues, like it is not pointing out exactly when i try to calibrate
so i did hard reset, after that on first startup , it was going on and on looping on screen alignment screen, somehow i manage to skip or bypass that screen by using Remote Alignment Screen tool
i also tried and install new ROM by doing HardSPL and now screen alignment works fine on first boot
but after using my phone 5 to 10 minutes my cell phone calibration got out or changes its coordinates in registry, than i search for the calibration data of HTC JADE 100 and manually enter it in phone's registry
( Can anyone post the exact and correct values or data of Calibration for HTC JADE 100 (t3232), may be it will work. )
after inserting calibration values that i took from forum in the registry, it works fine on middle portion of phone except top and bottom portion, and this thing is going on and on
after that i research on XDA forums about this issue and came to know that i might have an issue with my screen digitizer, if i change my screen digitizer it might work again
but i am not sure whether it is a digitizer issue, touch screen issue or any software issue or what, i am very upset from last 3 weeks , any one can tell me after reading the above mentioned problems that what happened to my phone and what should i do,
your help is appreciated.
Thanks.

I have the same problem, I need the touch calibration data to insert the cell regedit

Any body please???? I have the same problem aloso

looking for this too!

OOOOOH Yeaaaaah, I found the HTC Touch 3G (Jade) CalibrationData = "520,387 201,800 208,141 832,146 826,788"

Is ur problem fixed after inserting these values.
Sent from my HTC Desire using XDA App

Touch 3g caliberation details.
salmansaeed said:
Hi,
i have HTC Jade 10 (t3232) with me from last three weeks i am having some touch screen (Calibration) issues, like it is not pointing out exactly when i try to calibrate
so i did hard reset, after that on first startup , it was going on and on looping on screen alignment screen, somehow i manage to skip or bypass that screen by using Remote Alignment Screen tool
i also tried and install new ROM by doing HardSPL and now screen alignment works fine on first boot
but after using my phone 5 to 10 minutes my cell phone calibration got out or changes its coordinates in registry, than i search for the calibration data of HTC JADE 100 and manually enter it in phone's registry
( Can anyone post the exact and correct values or data of Calibration for HTC JADE 100 (t3232), may be it will work. )
after inserting calibration values that i took from forum in the registry, it works fine on middle portion of phone except top and bottom portion, and this thing is going on and on
after that i research on XDA forums about this issue and came to know that i might have an issue with my screen digitizer, if i change my screen digitizer it might work again
but i am not sure whether it is a digitizer issue, touch screen issue or any software issue or what, i am very upset from last 3 weeks , any one can tell me after reading the above mentioned problems that what happened to my phone and what should i do,
your help is appreciated.
Thanks.
Click to expand...
Click to collapse
Calibration Coordinates for Touch 3g T3232
527,519 209,847 219,159 831,188 839,848
To bypass screen alignment create Welcome.not file at the root of SD card,

Related

I cannot go past the 'align screen' setup!

Scaphs 4.20 is the 3rd ROM i have tried, and my phone will not align itself!!!!
I tap the target firmly and accurately like it blady tells me at each location 5 times, then the process just repeats itself!!
There is no dust or dirt on my screen.
What's next? Throw this phone against the wall?!
STUCK IN align screen window - -HELP
kastro said:
Scaphs 4.20 is the 3rd ROM i have tried, and my phone will not align itself!!!!
I tap the target firmly and accurately like it blady tells me at each location 5 times, then the process just repeats itself!!
There is no dust or dirt on my screen.
What's next? Throw this phone against the wall?!
Click to expand...
Click to collapse
I suddenly have the same problem - no one else? My problem is more specific. Screen alignment seems normal until the 4th (last) corner is reached. Then no response x2. By third try it jumps back to center to start again - no way out!
I have reflashed to TMobile WM5 V2, Love, and several WM6 ROMS - all same issue. I can read my phone fine though active synch - al software is there ...
IS THE DIGITIZER GONE BAD - ? just in one corner? How can I be sure? Any way around the required align screen to test further? PLEASE HELP!
Same issue,follow here:
http://forum.xda-developers.com/showthread.php?t=285062
HELP!!!!!!!!!
My 8525 could not pass the alignment screen so I bought I new digitizer and I installed it and I still get the same thing. What else can it be???
Disable Touchflo.... that should work if you have that enabled. Also Transcriber WONT work with Touchflo enabled. Cheers
HELP!!!!!!!!!
The Touchflo was never enabled on the phone. What else can it be???
thanks
Solutions for all of You : http://www.codefactory.es/downloads/mobile_speak_pocket/release/MSP_RemoteAlignment.zip
Same thing happened to me last week. I did a hard-reset because I was having a different problem and then I couldn't get past the screen alignment. I brought it to an AT&T Device Support Center and they couldn't figure it out so they swapped it out for me
jas_pik said:
Solutions for all of You : http://www.codefactory.es/downloads/mobile_speak_pocket/release/MSP_RemoteAlignment.zip
Click to expand...
Click to collapse
this just what i need since my touchscreen did not work thanks a milllion
And in case you want a little more info on that codefactory remote alignment application, see here:
http://forum.xda-developers.com/showthread.php?t=347539
Mike

Stuck at align screen

Hello
i've got en elf but it is stuck at the align screen.
i searched the forum for many day's and i found out that the digitizer probably is broken.
So i bought an new one an installed it with this manual
http://forum.xda-developers.com/showthread.php?t=407323
great manual by the way
I also installed a new housing
I installed one of the new roms
But it is still stuck on the align screen$
I have a constant loop
first middle cross, then the 4 corners and then back to the middle
i installed a program to override the align screen and then the i can use the phone but when i tap the touch screen it is not the place i tapped that opens because it is not aligned
What can i do because i am all out of answers
ps there is no warrenty anymore
Greetz Hatchy
it could be the touchscreen
LCD and touchscreen are not the same
some models heve them separated,some not
as i could see elf has
touchscreen pic1
LCD pic2
so try replacing the touchscreen they are few dollars on ebay
Or if you want, you can have somebody cook a ROM for you that bypasses the screen alignment part.
kareem9nba said:
Or if you want, you can have somebody cook a ROM for you that bypasses the screen alignment part.
Click to expand...
Click to collapse
i doubt it's the software,because he said he tried some roms
and bypassing screen align can make phone unuseable,so....
farukb said:
i doubt it's the software,because he said he tried some roms
and bypassing screen align can make phone unuseable,so....
Click to expand...
Click to collapse
Yea, but even though, he can still use the phone without the touch screen before he gets it replaced.
kareem9nba said:
Yea, but even though, he can still use the phone without the touch screen before he gets it replaced.
Click to expand...
Click to collapse
well if it was artemis...he could (arte has a mouse pointer)
but elf lacks the buttons,so using it without touch will be tricky
Hello
i replaced the touch screen because the old one had the same problems
but the new has the same problem
hatchy said:
Hello
i've got en elf but it is stuck at the align screen.
i searched the forum for many day's and i found out that the digitizer probably is broken.
So i bought an new one an installed it with this manual
http://forum.xda-developers.com/showthread.php?t=407323
great manual by the way
I also installed a new housing
I installed one of the new roms
But it is still stuck on the align screen$
I have a constant loop
first middle cross, then the 4 corners and then back to the middle
i installed a program to override the align screen and then the i can use the phone but when i tap the touch screen it is not the place i tapped that opens because it is not aligned
What can i do because i am all out of answers
ps there is no warrenty anymore
Greetz Hatchy
Click to expand...
Click to collapse
When your PPC is at the alignment part of the start up process simply plug it into your computer and let activesync run. You do not need to set up a partnership at this time to do this.
Explore your PPC and go to the windows folder and then to the startup folder and delete the welcome file in there.
Soft reset your PPC and you are good to go!
I had an IPAQ for years that had a bad spot in the middle of the screen and this is the only way I have found to bypass the alignment.
I am stuck on the align screen in a loop as well. What program did you write to skip the screen. I am not able to use the phone because of that. I am really terribly stuck. Please help. Thanks.
I hear placing a blank text file named "welcome" with the extension ".not" on the root of your SD card after hard resetting will bypass the Windows Mobile setup. And until you get your screen repaired (if ever) and if you have a working DPAD, then you can download a free, configurable mouse cursor here. Just go the the third post and click on the attachment I posted.
Dave
Well,
For what it's worth,
I found out on my brother's Qtek S200 that was also in a loop, that it automatically passed the align screen after some 15 times.
Later I found this in the registry:
HKLM\Hardware\Devicemap\Touch\MaxCallError(=16)
So I assume you can tick the align screen 16 times before it continues?
it works!!

Screen No Response but Occasional Response HELP

Hey I have an elf the T mobile version 64/128mb , phone has been working for 8 months now all of a sudden it wont respond but the call and end call buttons work fine the 4 way navigation key only work when lets say you go into the call records by pressing the green call button. You cannot do anything besides change time, answer calls and hang up. Please Help Tried hard reset soft reset, and the phone is unlocked to all networks using the network key method.
this looks a hardware problem may be the LCD or the digitizer
Is it fixable by software or maybe opening it up to fiddle ?
It is not the LCD, it is only the digitizer (the thing that is responsible for the 'touch') I recently had the same problem, until 1 week ago I purchased a new digitizer off eBay for $15.
Do not get LCD and Digitizer, just the digitizer to save money.
If there is no cracks or damage to the screen (bad cracks, pixel damage etc) you only need a digitizer.
I have a video I made of me changing mine which I'm editing atm. I do have photos.
This is the correct response. It is not software if it started to work occassionally and then stop, this is what happened to mine. 99% it is digitizer!
Thats cool please email me link [email protected] for your video I will order one now.
http://www.google.com/search?hl=en&...nge+digitizer+htc+touch+youtube&aq=f&oq=&aqi=
See the 3rd result.
Hey I read its going to ttake 14 days for my digitizer to come , in the mean time is there a way I can bypass the touch the screen alignment page when you first boot up?
you can get www.mymobiler.com
Cheers.
Tried it but requires you to accept the installation on the phone any other ideas?
Thats weird, mine doesnt.
it will auto install.
It says on the little status box installing mymobile to the phone then it dissappears saying not connect. this message comes up everytime you try and run it.
Sorry, I ran out of brain juice.
You have to stick with this for a while than, and bear the bitter pill.
MyMobiler should be able to install onto the phone itself.
But I really wonder why this doesnt work.
Hey thanks anyway found this whiel browsing aroudn on the internet fixed the problem it aligns the screen for you http://216.139.221.18/downloads/mobile_speak_pocket/release/MSP_RemoteAlignment.zip
varyjam said:
Hey thanks anyway found this whiel browsing aroudn on the internet fixed the problem it aligns the screen for you http://216.139.221.18/downloads/mobile_speak_pocket/release/MSP_RemoteAlignment.zip
Click to expand...
Click to collapse
and it does auto install its the part where it asks you to accept remote.exe and you have to tap yes or no for it to run on your device, havent bypassed that yet but atleast I can just accept calls and check texts but let me know if you have a solution for the whole remote.exe thing
varyjam said:
and it does auto install its the part where it asks you to accept remote.exe and you have to tap yes or no for it to run on your device, havent bypassed that yet but atleast I can just accept calls and check texts but let me know if you have a solution for the whole remote.exe thing
Click to expand...
Click to collapse
Can you use the d-pad to do that?
Thanks you guys just come back from florida fitted the new digitizer everything works super and the digitizer i bought came with a new screen attached to it. best £7 spent lol
jeremy89632 said:
Can you use the d-pad to do that?
Click to expand...
Click to collapse
tried but d pad just initiates what ever is highlighted on the today screen
^^ A digitizer is a screen Its the touch screen part with htc logo at the bottom... right? (with a little ribbon comin out).. this IS the digitizer! (screen included).

Require HTC Touch 3G Calibration File

Guys,
I own an HTC Touch 3G.The Touch Screen suddenly stoped working.I tried Hard Reset,then it went into the Known loop of Align Screen.I somehow managed by skipping the Align Screen using the Remote Screen Alignment Tool.
But to make my Touch Screen to work, I need the Calibration Data File which by using Remote Screen Alignment Tool i can put the alignment for my Phone (Hopefully,Not Sure)
Any Tips & Suggestions are always welcome !!!
Plz help me to save my phone ...
Thanks,
Bala
t3232 help!
i have bought a htc clone t3232.i have problem with the touchscreen,works complete wrong!i have done soft/hard reset but i cannot resolve the problem.
i cannot enter to my phone because i cannot enter my password!
i have tried many times to calibrate the screen but every time the problem remains!please help i have the phone 2 days!
Guys,
Anybody can create the calibration file using Remote Screen Alignment Tool & provide me...
It will make my Touch screen to work...
Thanks,
Bala
ulvergr said:
i have bought a htc clone t3232.i have problem with the touchscreen,works complete wrong!i have done soft/hard reset but i cannot resolve the problem.
i cannot enter to my phone because i cannot enter my password!
i have tried many times to calibrate the screen but every time the problem remains!please help i have the phone 2 days!
Click to expand...
Click to collapse
I got problems with the touch screen also, when i press something on the screen it highlights above or below my selection, writing SMS was nightmare.So i went to htc service and they replace the "touch digitizer" and now my problems are history, everything works like charm.I think you should try that.

Align touchscreen after replacing

The touchscreen of my HTC Diamond Touch 2 had a "Newton Rings" problem. So i decided to replace it. Found a new touchscreen on E-bay and replaced it in a hour or so.
But after rebooting the alignment of the touchscreen is not correct.
After trying "Remote screen Aligment" form Code factory, the screen aligment program in my HTC keeps on looping.
Even tried to use "Mymobiler", so i could remotely use my HTC from a pc and start the screen alignment program, but that also keep looping.
Also used "CeRegistryEditor" to change the registry of my HTC from a pc, to change the calibration Data of m touchscreen. But i dont have the correct data code. Does someone got the correct code for me?
You can find it here:
HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH:CalibrationData
This is my code: (and not working correctly)
511,558 182,889 187,217 847,216 850,892
Here you go man.
I exported the whole Touch registry just in case.

Categories

Resources