Guys,
I own an HTC Touch 3G.The Touch Screen suddenly stoped working.I tried Hard Reset,then it went into the Known loop of Align Screen.I somehow managed by skipping the Align Screen using the Remote Screen Alignment Tool.
But to make my Touch Screen to work, I need the Calibration Data File which by using Remote Screen Alignment Tool i can put the alignment for my Phone (Hopefully,Not Sure)
Any Tips & Suggestions are always welcome !!!
Plz help me to save my phone ...
Thanks,
Bala
t3232 help!
i have bought a htc clone t3232.i have problem with the touchscreen,works complete wrong!i have done soft/hard reset but i cannot resolve the problem.
i cannot enter to my phone because i cannot enter my password!
i have tried many times to calibrate the screen but every time the problem remains!please help i have the phone 2 days!
Guys,
Anybody can create the calibration file using Remote Screen Alignment Tool & provide me...
It will make my Touch screen to work...
Thanks,
Bala
ulvergr said:
i have bought a htc clone t3232.i have problem with the touchscreen,works complete wrong!i have done soft/hard reset but i cannot resolve the problem.
i cannot enter to my phone because i cannot enter my password!
i have tried many times to calibrate the screen but every time the problem remains!please help i have the phone 2 days!
Click to expand...
Click to collapse
I got problems with the touch screen also, when i press something on the screen it highlights above or below my selection, writing SMS was nightmare.So i went to htc service and they replace the "touch digitizer" and now my problems are history, everything works like charm.I think you should try that.
Related
Hello
i've got en elf but it is stuck at the align screen.
i searched the forum for many day's and i found out that the digitizer probably is broken.
So i bought an new one an installed it with this manual
http://forum.xda-developers.com/showthread.php?t=407323
great manual by the way
I also installed a new housing
I installed one of the new roms
But it is still stuck on the align screen$
I have a constant loop
first middle cross, then the 4 corners and then back to the middle
i installed a program to override the align screen and then the i can use the phone but when i tap the touch screen it is not the place i tapped that opens because it is not aligned
What can i do because i am all out of answers
ps there is no warrenty anymore
Greetz Hatchy
it could be the touchscreen
LCD and touchscreen are not the same
some models heve them separated,some not
as i could see elf has
touchscreen pic1
LCD pic2
so try replacing the touchscreen they are few dollars on ebay
Or if you want, you can have somebody cook a ROM for you that bypasses the screen alignment part.
kareem9nba said:
Or if you want, you can have somebody cook a ROM for you that bypasses the screen alignment part.
Click to expand...
Click to collapse
i doubt it's the software,because he said he tried some roms
and bypassing screen align can make phone unuseable,so....
farukb said:
i doubt it's the software,because he said he tried some roms
and bypassing screen align can make phone unuseable,so....
Click to expand...
Click to collapse
Yea, but even though, he can still use the phone without the touch screen before he gets it replaced.
kareem9nba said:
Yea, but even though, he can still use the phone without the touch screen before he gets it replaced.
Click to expand...
Click to collapse
well if it was artemis...he could (arte has a mouse pointer)
but elf lacks the buttons,so using it without touch will be tricky
Hello
i replaced the touch screen because the old one had the same problems
but the new has the same problem
hatchy said:
Hello
i've got en elf but it is stuck at the align screen.
i searched the forum for many day's and i found out that the digitizer probably is broken.
So i bought an new one an installed it with this manual
http://forum.xda-developers.com/showthread.php?t=407323
great manual by the way
I also installed a new housing
I installed one of the new roms
But it is still stuck on the align screen$
I have a constant loop
first middle cross, then the 4 corners and then back to the middle
i installed a program to override the align screen and then the i can use the phone but when i tap the touch screen it is not the place i tapped that opens because it is not aligned
What can i do because i am all out of answers
ps there is no warrenty anymore
Greetz Hatchy
Click to expand...
Click to collapse
When your PPC is at the alignment part of the start up process simply plug it into your computer and let activesync run. You do not need to set up a partnership at this time to do this.
Explore your PPC and go to the windows folder and then to the startup folder and delete the welcome file in there.
Soft reset your PPC and you are good to go!
I had an IPAQ for years that had a bad spot in the middle of the screen and this is the only way I have found to bypass the alignment.
I am stuck on the align screen in a loop as well. What program did you write to skip the screen. I am not able to use the phone because of that. I am really terribly stuck. Please help. Thanks.
I hear placing a blank text file named "welcome" with the extension ".not" on the root of your SD card after hard resetting will bypass the Windows Mobile setup. And until you get your screen repaired (if ever) and if you have a working DPAD, then you can download a free, configurable mouse cursor here. Just go the the third post and click on the attachment I posted.
Dave
Well,
For what it's worth,
I found out on my brother's Qtek S200 that was also in a loop, that it automatically passed the align screen after some 15 times.
Later I found this in the registry:
HKLM\Hardware\Devicemap\Touch\MaxCallError(=16)
So I assume you can tick the align screen 16 times before it continues?
it works!!
Hi boyz!
I have a problem friends. My Trinity is broken by the surface of the touch, but it display the screen itself is not reached. The problem is that: I have performed a Hard reset and I'm stuck at the calibration of the screen as it is broken! Please if there is a way to pass the stage of calibration, please tell me because i'm lost! Thank you in advance
Try msp remote alignment
With this program you can preform or bypass the alignment from your pc
http://www.codefactory.es/en/downloads.asp?id=43
(the program is halfway the page)
Arjan
WaveMaster1406 said:
Hi boyz!
I have a problem friends. My Trinity is broken by the surface of the touch, but it display the screen itself is not reached. The problem is that: I have performed a Hard reset and I'm stuck at the calibration of the screen as it is broken! Please if there is a way to pass the stage of calibration, please tell me because i'm lost! Thank you in advance
Click to expand...
Click to collapse
hello wavemaster,i suggest to get your touch screen replaced asap & calibrate your screen when it's been replaced,because i'm sure it'll be impossible 4u still to calibrate it.and even if you passed the calibration,you will find it hard to use your device because the touch has lost its precision,it'll be same as useless.believe me coz i've been there.ΓΌ
My Phone's screen suddenly not responding correctly to touch. I press at one place the phone respond erratically. I tried hard reset but I am stuck on Align Screen, it is not moving further even after repeated touch. PLease help.
Thanks
Amit
amit200465 said:
My Phone's screen suddenly not responding correctly to touch. I press at one place the phone respond erratically. I tried hard reset but I am stuck on Align Screen, it is not moving further even after repeated touch. PLease help.
Thanks
Amit
Click to expand...
Click to collapse
What happened? Did you flash a new rom to your phone? Did you drop it? Did it get any water damage? It sounds like something is wrong (mechanically / electronically)
I DID FLASH MY blackstone to 1.56 just change from german to french
the phone stucks on align
i cant align the screen , impossible to make a hard reset and all the RemoteCalibration doesnt support the blac100
the tric welcome.not doesnt work also
it works well in german now i cant flash it because invalid vendor id
radio 1.13.25.24
G52.62.25.34U
D.1.56.00.00
BLAC100 32 M
SPL-1.54.0000
ANY IDEA HOW TO FIX???
HOW TO EDIT THE REGISTRY VIA EXPLORE THE PHONE VIA ACTIVESYNCRO???
Hi manouba,
please try the following, if possible:
(1) Connect your Phone to your PC using Activesync (it works even when you are stuck at alignment screen).
(2) Download this Remote Screen Alignment program.
(3) Install and run this program from your PC.
(4) Choose SKIP to avoid the Align Screen Wizard. This program has a few features that you might want to use in the future.
(5) Restart the phone and you are done.
Let me know if this works or not.
Note: Incase your screen is badly aligned (if touch screen works); you can start the alignment wizard from settings and do few taps. You will not come out of the loop, so press any key like screen off button, Windows or restart the phone.
Best Regards.
Try using mobile registry editor: http://handheld.softpedia.com/get/Desktop-and-Shell/Windows/Mobile-Registry-Editor-10636.shtml
Hi guys,,,
My gf asked me if I can fix her fone, she said her phone's touch screen is unresponsive. Yesterday, she gave me the phone so I can work with it. Here're the symptoms:
- The screen is unresponsive
- Softreset doesn't solve the problem
- The hardware buttons are work. (I still can operate the fone with hw buttons)
I normally suggested her to do a hard reset, but she refused unless I can back up the text messages,,,
so, what are you guys suggest to solve the problem? I have downloaded three back up softwares, but I would like to fix the problem before I hard reset it, and to understand that hard reset might not solve the problem,,, it can be a hardware failure.
and oh, her father bought the Gene online, so no warranty,,,
thx in advance guys!
no one? wew,,, the gene forum is surely quiet,,,
use PIM backup (google for it)
and after taking the backup do a hard reset
Try Screen Alignment
Hi,
Please try to do screen alignment....
Start - > Settings - > System -> Screen - > Align Screen
The touch screen may have stopped responding because of the pressure and filger threshold values may have corrupted. Plaese try above option and it may work again.
Also the touch hardware or driver could be the problem.
tq for the replies
screen alignment didn't work. it fail to interpret touch input.
the driver and value corruption theories seem logical, and if it is, hard reset would solve the problem.
I have backed up the phone with SPB BackUp. Great piece of software. I will hardreset the fone after I get her permission.
awww, hard reset didn't solve the problem,,,
are there any explanations for unresponsive touch screen except hardware failure?
Hi,
i have HTC Jade 10 (t3232) with me from last three weeks i am having some touch screen (Calibration) issues, like it is not pointing out exactly when i try to calibrate
so i did hard reset, after that on first startup , it was going on and on looping on screen alignment screen, somehow i manage to skip or bypass that screen by using Remote Alignment Screen tool
i also tried and install new ROM by doing HardSPL and now screen alignment works fine on first boot
but after using my phone 5 to 10 minutes my cell phone calibration got out or changes its coordinates in registry, than i search for the calibration data of HTC JADE 100 and manually enter it in phone's registry
( Can anyone post the exact and correct values or data of Calibration for HTC JADE 100 (t3232), may be it will work. )
after inserting calibration values that i took from forum in the registry, it works fine on middle portion of phone except top and bottom portion, and this thing is going on and on
after that i research on XDA forums about this issue and came to know that i might have an issue with my screen digitizer, if i change my screen digitizer it might work again
but i am not sure whether it is a digitizer issue, touch screen issue or any software issue or what, i am very upset from last 3 weeks , any one can tell me after reading the above mentioned problems that what happened to my phone and what should i do,
your help is appreciated.
Thanks.
I have the same problem, I need the touch calibration data to insert the cell regedit
Any body please???? I have the same problem aloso
looking for this too!
OOOOOH Yeaaaaah, I found the HTC Touch 3G (Jade) CalibrationData = "520,387 201,800 208,141 832,146 826,788"
Is ur problem fixed after inserting these values.
Sent from my HTC Desire using XDA App
Touch 3g caliberation details.
salmansaeed said:
Hi,
i have HTC Jade 10 (t3232) with me from last three weeks i am having some touch screen (Calibration) issues, like it is not pointing out exactly when i try to calibrate
so i did hard reset, after that on first startup , it was going on and on looping on screen alignment screen, somehow i manage to skip or bypass that screen by using Remote Alignment Screen tool
i also tried and install new ROM by doing HardSPL and now screen alignment works fine on first boot
but after using my phone 5 to 10 minutes my cell phone calibration got out or changes its coordinates in registry, than i search for the calibration data of HTC JADE 100 and manually enter it in phone's registry
( Can anyone post the exact and correct values or data of Calibration for HTC JADE 100 (t3232), may be it will work. )
after inserting calibration values that i took from forum in the registry, it works fine on middle portion of phone except top and bottom portion, and this thing is going on and on
after that i research on XDA forums about this issue and came to know that i might have an issue with my screen digitizer, if i change my screen digitizer it might work again
but i am not sure whether it is a digitizer issue, touch screen issue or any software issue or what, i am very upset from last 3 weeks , any one can tell me after reading the above mentioned problems that what happened to my phone and what should i do,
your help is appreciated.
Thanks.
Click to expand...
Click to collapse
Calibration Coordinates for Touch 3g T3232
527,519 209,847 219,159 831,188 839,848
To bypass screen alignment create Welcome.not file at the root of SD card,