[Q] Clear Storage Effects on HTC p3300 - Hero, G2 Touch General

I use clear storage function in HTC p3300, thinking everything goes to factory re-settings but i got some trouble because of the functions
Now the Mobile does not open,
It just shows windows background and then says to tap the screen and when done
it takes to another screen with align screen and one cursor but nothing else and no matter how long you wait or how many times you tap nothing changes .....
the system info is
i pl :-3.13.0001
spl :-3.13.000
gsm :-02.94.90
os :-3.13.0.0
how can i take it back to the normal usable stage ...
how can i fix my problem with this, ???
please help

Wrong section pal.

Related

arte 100 stays on start-up screen

Hello to everybody!
this is a great job you are doing here!
there is a bit of a problem.
i had wm6 arte 100 with:
IPL:3.13.0001
SPL:3.13.0000
GSM:02.94.90
OS:3.13.00
and after running uspl :
SPL:1.11.0000 (I'm sure)
OS:3.13.0.0 (I think)
after a soft reset and a full restart all were running properly.
i took out sim card and sd card connected properly to pc and started the
o2 premium 2.0 full
the procedure went well i made some setup regarding appearence and tried a restart (not soft) for the sim and sd cards to mount.
the ppc boots i see the htc moving start-up screen and then stays in the usual green "windows mobile" screen.
is there any case it can be fixed or should i start trying to see if it can fly?
thank you very much at least for chance to see something different in my artemis screen!
keep walking
after trying several kind of restart here is what,
i pressed both selection keys and at the same time pressed the soft reset button and i kept pressing the selection keys untill a msg in black backround informed about a proccedure that would take place and erase all data etc,etc
i presssed the green key and after 10 sec i was working again full.
i proceded to further settings regarding touch flo and soft reset for the settings to apply, all well also!!!!!
i really do not how but i think i did it !!!!!!!!

Touch Malfunction

My Phone's screen suddenly not responding correctly to touch. I press at one place the phone respond erratically. I tried hard reset but I am stuck on Align Screen, it is not moving further even after repeated touch. PLease help.
Thanks
Amit
amit200465 said:
My Phone's screen suddenly not responding correctly to touch. I press at one place the phone respond erratically. I tried hard reset but I am stuck on Align Screen, it is not moving further even after repeated touch. PLease help.
Thanks
Amit
Click to expand...
Click to collapse
What happened? Did you flash a new rom to your phone? Did you drop it? Did it get any water damage? It sounds like something is wrong (mechanically / electronically)
I DID FLASH MY blackstone to 1.56 just change from german to french
the phone stucks on align
i cant align the screen , impossible to make a hard reset and all the RemoteCalibration doesnt support the blac100
the tric welcome.not doesnt work also
it works well in german now i cant flash it because invalid vendor id
radio 1.13.25.24
G52.62.25.34U
D.1.56.00.00
BLAC100 32 M
SPL-1.54.0000
ANY IDEA HOW TO FIX???
HOW TO EDIT THE REGISTRY VIA EXPLORE THE PHONE VIA ACTIVESYNCRO???
Hi manouba,
please try the following, if possible:
(1) Connect your Phone to your PC using Activesync (it works even when you are stuck at alignment screen).
(2) Download this Remote Screen Alignment program.
(3) Install and run this program from your PC.
(4) Choose SKIP to avoid the Align Screen Wizard. This program has a few features that you might want to use in the future.
(5) Restart the phone and you are done.
Let me know if this works or not.
Note: Incase your screen is badly aligned (if touch screen works); you can start the alignment wizard from settings and do few taps. You will not come out of the loop, so press any key like screen off button, Windows or restart the phone.
Best Regards.
Try using mobile registry editor: http://handheld.softpedia.com/get/Desktop-and-Shell/Windows/Mobile-Registry-Editor-10636.shtml

[Help] Start menu Tool bar appears earlier than it should

so i have been using my X1 for about 1 week now
i restarted the phone for a couple of occasion
and i used to see the Windows Mobile 6.1 loading screen just before we enter the today screen right..
usually during the Loading Screen of the WM 6.1, there shouldn't be a Start menu bar appearing right..
it should only appears when the WM 6.1 loading screen are finished and when we are on the today's screen, that is when the start menu bar appears
but idk, earlier today, i had to close my phone because the battery was low, and when i get back home, i start charging it, and then i turn my phone again.. and what i notice is that, the "start" menu now appears along with the loading screen of WM 6.1
is that normal.. or?
maybe this info will help, but i doubt it's the cause
i started using SKTools ( www.s-k-tools.com ) like around 3 days ago
and i do the Clean! and registry clean up.. never restarted my phone ever since 3 days ago.. but i dont think that is the cause for this?
i only want to think that perhaps, now my system are a bit lighter after i remove some useless junk using the SKTools, so the start menu bar loads faster.. hopefully that is the case?
but i doubt.. any help?
That is a problem? Please explain how?
yes, because if i remember correctly, the start menu never appears before on WM6.1 loading screen
im sure all of your X1 also have a full WM6.1 loading screen without a start menu bar on the top?
It is perfectly normal.
I really don't see the point in your question. Is your phone having an issue, a problem?
no.. nothing is wrong. but why was it not loaded in the WM screen before?
there must have been something to make the start menu appear faster, and i see this as not normal
that's all i wanted to know
thanks anyway for answering
TweFoju said:
no.. nothing is wrong. but why was it not loaded in the WM screen before?
there must have been something to make the start menu appear faster, and i see this as not normal
that's all i wanted to know
thanks anyway for answering
Click to expand...
Click to collapse
happens to me to - its really nothing - i think its always been there for me - i just see it as part of the boot up phase - dont worry about it

Elf does not load

Hi all,
My HTC Touch doesn't load. The blue "Windows Mobile" screen comes up - then nothing else happens.
I've tried pressing the red and green buttons while inserting the stylus into the reset button - the screen goes black while the stylus is in, then I get that blue screen again. The only way I can switch it off is to remove the battery.
I've tried removing & reinserting the battery. I've tried a new battery.
It was working fine, but wouldn't sync with my comp. I switched it off & on again so Windows would detect the connection, and this happened!
It's about 30 degs Celsius in here - don't know if that makes a difference ...
HEEEELP!
Thankyou.
Never mind ... it just started working again after 60 mins of not working ... note to self, don't keep anything vital on there ...
*edit* and now it's not working again. I think something's close to dying in there ... Okay, I still need help please!
And now it's not working again. It seems once I get it working, I can't switch it off for ANY reason, or the problem crops up again.
How can I fix it once and for all please?
Thanks.
Hopeful bump?
Hi Kettie
You have to convince ppl here that you tried to solve your problem and then ask for help in the appropriate thread Did you read this http://forum.xda-developers.com/showthread.php?t=406721 ?
Thanks for replying ... I thought this was the right place cos I found these forums on google when searching for answers to my problem.
I had been through the docs, but I'm still hugely confused. I'm not sure that my Elf's problems count as 'bricked', and not sure what the Bootloader menu is or if it would even be helpful for my problems, but I'll post in that link you gave and maybe some kind soul will take pity on me!
*edit* I've posted in a new place, but I'm fairly certain it's yet another WRONG place. The thread is called "[REF]Recover / Revive your dead / bricked HTC ELF or ELFIN[ONLINE]" which seems right, cos the phone is partly dead, but that thread is in the " Elf upgrading etc." section, and I wasn't trying to upgrade, just to use the thing. Also, the last 2 people to post there never got any help.
Where should I be posting please?
Thanks!
First try to hard reset:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
Thank you, I had tried that following information on these forums. When the Elf is stuck in the blue Windows screen startup mode, all that happens when I try to hard reset is that the screen goes black until I take the stylus out of the reset button, then it goes back to the blue screen.
I hadn't tried it when the unit is working, but just did ... all that happened was that it successfully rebooted ... but it didn't ask me if I wanted to delete all my data, and it didn't delete in fact delete anything.
Great news, good Elfing
Why "great news"? I've still got the same problem I had. If I turn the PDA off, then it'll take several hours of turning the machine on, then pulling the battery out to turn it off, then turning it on again, to get it to go through the bootup process.
Plus now it looks like I can't hard-reset even if I want to ...
The unit's only good once I've got it up and running ... I still have my original problem ...
Sorry, I thought you solved the prob
I read something about chinese elf clones, one of the signs is they don't hard reset like normal elf http://forum.xda-developers.com/showthread.php?t=548277&highlight=chinese+elf+clones
Can you run this app http://forum.xda-developers.com/showthread.php?t=418892&highlight=chinese+elf+clones ?
I'm going to bed, we'll see tomorrow
I think it might be a clone, but the hard reset thing used to work in the past (done it a couple of times previously when ActiveSync stopped working on my XP machine - in the end, upgrading to Vista fixed that problem).
Hard reset stopped working around the time that it also stopped wanting to start up after being switched off...
I'll try the program when I'm back on that Vista computer, will post the results here later.
Thanks!
Okay, I tried running the app, but it didn't work. So I tried installing the two cab files onto the Elf, THAT worked, but the app still didn't. Which I guess means it's a clone (either that, or I'm doing something wrong in running these apps).
Basically, it told me:
HTC Touch device information - by dsixda
Touch version : Unknown
Device ID : Unknown
CID : Unknown
IPL : ÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
SPL : Unknown
ROM Version : Unknown
ExtROM Version : None
Operator Version: None
AKU Version : 0.5.0
Page Pool (MB) : Unknown
RAM Size (MB) : Unknown
ROM Size (MB) : Unknown
Model No. : Unknown
Part Number : Unknown
MCC+MNC : Not found
IMEI (private) : Unknown
Serial Number (private): Unknown
MAC Address (private) : Unknown
I guess this doesn't help you help me much ... but still, any other clues about how I can get this thing to switch on first time, every time, and get past the blue (not green) Windows Mobile screen?
Thanks so much!
same problem is the with my elfin also ... i cant reboot my ppc. it takes 20 to 30 mins to get completely loaded and back to normal. did u check if ur air plane mode and the phone mode are working fine. i was not working in my case. ive given it for service.have to wait till i get it back.
I'm not sure what "airplane mode" is ... but I can send/receive calls just fine, send/receive texts just fine, and turn the phone on and off in the 'connectivity' window ... when the thing is working, it's just great.
The only problem I have with it is that if I turn it off, I might not be able to turn it on again.
Maybe it's a software issue ... if it were a computer, I could use 'safe mode' to boot with minimal apps and see what the problem is. Is there anything like that for Windows Mobile?
there is no specific safe mode boot in wm as far as i know. try changing ur mother board.. if u r still in warrenty its well and gud.
Nope, it's not. And I wouldn't know where to get another motherboard, or how to change it. :/
Hi Kettie
From your device info, or lack of it, it seems you have a clone. Now in order to see if your problem is software related, you have to try hard reset this will set it back to factory defaults. Copy paste " chinese elf clone " in the general search and read what others say, you'll also find what are the other combinations for hard reset.

[Q] screen trouble

Hello you all
I've got a strange problem with my HDmini :
Sometimes, the screen stops responding !
I can touch any button, the screen in any place, nothing happens.
I only have to remove the battery ( because thre is no reset ).
After strated again, when PIN code is asked, if a tap on "3" for exemple, it is like if i have tapped on "6" ; if i tap on "erase", i see "cancel" highlighted !
And after a few minutes, everything becomes normal again.
An idea ?
Did you install any cab or custom settings?
Yes, i'm using throttlelauncher with WP7 theme but when the screen is stuck, i have two choices :
Remove the battery to start again, without throttlelauncher started .
Restart the HTC with Mymobiler if the HDmini is connected.
At the end, the problem stays on.
I only have to wait for some time and then the touchscreen works again... by itself !
I haven't tried Throttlelauncher yet. I don't know if that can be the possible culprit.
Bart3385
For example, yesterday and today everything was OK and 5 minutes ago, the screen has stuck again !
Nothing possible to do on the screen neither with the 5 keys at the bottom !
I have to connect the HDmini to the PC and reboot it with my mobiler;
then i can use the screen interface.
It seems that the problem is the touch screen !
francois64 said:
Bart3385
For example, yesterday and today everything was OK and 5 minutes ago, the screen has stuck again !
Nothing possible to do on the screen neither with the 5 keys at the bottom !
I have to connect the HDmini to the PC and reboot it with my mobiler;
then i can use the screen interface.
It seems that the problem is the touch screen !
Click to expand...
Click to collapse
Try to ask for a new device (if it's still under warranty )
bart3385 said:
I haven't tried Throttlelauncher yet. I don't know if that can be the possible culprit.
Click to expand...
Click to collapse
Maybe your device is blocking so hard that your keys and screen both don't work anymore. I have had that too once Maybe Trottle causes this?
Madmatt
The problem is to be sure that a software is the problem origin; before i ask for the PDA to be replaced by my operator.
Try to do hard reset. Install only the basic stuff. (Minus Throttlelauncher.) See if the phone goes back to normal.
_Madmatt said:
Try to ask for a new device (if it's still under warranty )
Click to expand...
Click to collapse
That's a possible option.
Somehow, i'm not allowed to make that kind of suggestion anymore. Someone keeps on following me and make a mockery whenever i mention anything like that.
Anyway, try to check software problem first. As i first did on my own device. Before i've ascertained it is defective hardware.
francois64 said:
Hello you all
I've got a strange problem with my HDmini :
Sometimes, the screen stops responding !
I can touch any button, the screen in any place, nothing happens.
I only have to remove the battery ( because thre is no reset ).
After strated again, when PIN code is asked, if a tap on "3" for exemple, it is like if i have tapped on "6" ; if i tap on "erase", i see "cancel" highlighted !
And after a few minutes, everything becomes normal again.
An idea ?
Click to expand...
Click to collapse
It is normal, sometimes, it doesn't respond, lame htc hd mini. I have this problem long ago.
Thank's for your suggestions.
Today, the phone is completly stuck.
That's why i don't think it is a software problem.
I can' even entry the PIN code.
i've tried a Hard reset, to flash back to Original Rom = nothing more.
So i've asked Orange for an exchange under garanty...
That's a good move.
In some areas, a high percentage of units need replacement.

Categories

Resources