hello
i have here 02 nova.. i try to update the ROM to this file (RUU_Elfin_hTC_Asia_India_3.07.720.03_4.1.13.71_03.34.90_BLUE_Ship.exe)
and also i try to unlock CID
but its stop in 3%
now only 02 appers on screen and its off..
is there any solution of my problem????
thanks in advance
Please read the the stickies. You likely flashed an Elf ROM on an Elfin, which may likely have resulted in a brick. Only way to fix is to use the shipped ROM from O2 Nova, or the gold card method.
Since the Wiki page is currently down, the page for gold card method is not viewable.
Related
good day,
that I always try to make an update in the 9100 it stops to the 98%, restarts in the screen of tres colors.
I have IPL/SPL 1.xx
help !!!!!
gildp said:
good day,
that I always try to make an update in the 9100 it stops to the 98%, restarts in the screen of tres colors.
I have IPL/SPL 1.xx
help !!!!!
Click to expand...
Click to collapse
What rom are you trying to put on? If you have the problem i think you have, i would not go around asking everyone cus you will get smoked! As its on here like a million times!
First off take your storage card out.. .. send off, flash back to original carrier rom... leave storage card out and flash again..
....
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
where can i find th original t-mobile 1.08 rom for the mda....
i cant seem to find it nowhere....
i had the same problem wen i was upgradin to wm6
I guess it does offend the moderators because I just posted the same question after searching and searching for weeks on resolution on this issue. They toasted my thread, probably this one too and I hope they don't because after reading 100+ posts on this topic, there was no resolution. Of course I tried without the SD card. I tried the 1.05 ROM as well as xenin's T-Mobile 2.26 ROM with built in CID unlock and both froze at 98%. By the way is your QTEK 9100 from the factory because mine is and I think this is the common denominator in this problem. Please someone help cause I'm probably new to this forum (not to howardforums) but I know my phone stuff so this is a real issue! Thanks in advance and pls do not delete this thread. Thanks.
sunycheeba416 said:
... T-Mobile 2.26 ROM with built in CID unlock ...
Click to expand...
Click to collapse
You better start re-reading the 100+ posts!
First of all your WIZ needs to be CID unlocked - a 'build-in' CID unlock in a ROM you're trying to flash will not help!
I understand that. That was my second way of trying to resolve it. I originally followed the "The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards" post and followed it word for word (and read all 36 pages). I tried flashing buttons 1.05 ROM (http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html) and got the 98%. The second time I thought I'd give it a shot and tried xenin's T-Mobile ROM with built-in CID and it froze at 98% too! My suspicion is that there is something different about factory phone than SP branded phones. Anyone else?
I also rebooted my PC and phone. Deleted all my session temp files. Tried 3 different computers. Tried without SD card. Everytime I it froze at 98% and had to revert back to the original QTEK 9100 ROM (2.17). And just for kicks I tried installing T-Mobile's original 2.26 ROM and it gave me a "vendor match" error, meaning it's still CID locked.
Umm, if you bought it straight from HTC/Qtek, wouldn't it already be unlocked? From your last post, it seems you do not have a branded or locked phone...
It is SIM unlocked which means I can use an SIM card. BUT it is not CID unlocked meaning that I can't flash the ROM to another maker's ROM (like QTEK to T-Mobile or QTEK to Cingular or QTEK to Custom ROM).
I wsa thinking that HTC and QTEK have tight bonds and was wondering if I can make the jump to an HTC ROM and CID unlock it from there. Not sure if that makes a difference. Kinda stuck
gildp said:
good day,
that I always try to make an update in the 9100 it stops to the 98%, restarts in the screen of tres colors.
I have IPL/SPL 1.xx
help !!!!!
Click to expand...
Click to collapse
You must flash a FULL carrier 2.xx rom before flashing any custom rom from this site (other than the ones used for CID unlocking)
You will have issues if you skip step 17 of the Definitive guide to Unlocking and Upgrading G3 Wizards (Sticky in this forum).
Trying to recover a bricked g4 wizard stuck at the splash ( radio section reporting version at boot so assume it's not a CID / security area issue) and I can only find the shipped rom to try flashing via bootloader which it rejects as being too old.
Anyone got a rapidshare link for v2.21.4.101 please? Searching on the boards points to o2 and o2 in their infinite wisdom no longer host it, or rapidhsare with out of date files.
Thanks.
M.S
Mysterious Stranger said:
Trying to recover a bricked g4 wizard stuck at the splash ( radio section reporting version at boot so assume it's not a CID / security area issue) and I can only find the shipped rom to try flashing via bootloader which it rejects as being too old.
Anyone got a rapidshare link for v2.21.4.101 please? Searching on the boards points to o2 and o2 in their infinite wisdom no longer host it, or rapidhsare with out of date files.
Thanks.
M.S
Click to expand...
Click to collapse
What were you trying to do when this happened,were you trying to flash another rom ? which rom you were trying to flash ? what IPL/SPL it displays now.well if it gets into bootloaders its certainly not bricked.
You can download the official O2 v2.21.4.101 from here :-
http://www.megaupload.com/?d=BTSJK5C0
zabardast_1 said:
What were you trying to do when this happened,were you trying to flash another rom ? which rom you were trying to flash ? what IPL/SPL it displays now.well if it gets into bootloaders its certainly not bricked.
You can download the official O2 v2.21.4.101 from here :-
http://www.megaupload.com/?d=BTSJK5C0
Click to expand...
Click to collapse
Thanks. A collegue had tried wm6 and botched it so gave it to me to try to fix as 'i know about these phones' apparently ;-)
The only rom I could find from o2( unit isn't CID unlocked as it's a g4) to reflash with to try to recover gave the error' this update is too old for this device' etc as it was the launch rom.
Thanks, I'll post if the device recovers!
M.S
Sorted, thanks, has booted up fine with the update rom.
Thankyou.
M.S
Thanks !
Grrrrr8 you got it working
Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
nauman said:
Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
Click to expand...
Click to collapse
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
farukb said:
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
Click to expand...
Click to collapse
I have the original ship ROM "P800w_SEA_ENG_WM6_Upgrade_20070713", even that fails with the same error message.
My device is already unlocked using the artemis uspl and I have used several ROMs earlier!!!!
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
corepda said:
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
Click to expand...
Click to collapse
I sent my device to HTC service center and go it resolved. That is the only thing which worked for me after a couple of weeks searching in the forums and no solution. But the HTC SC buggers replaced my device entirely and gave me back an old **** device . So also keep this in mind. you won't be sure, if you get your original device back after the so called repair. HTC SC in India is super *****y, had a bitter experience!
Now I have moved to TD2, know that I was at loss, but am happy to have a shiny new TD2
Service Centre at Mumbai Sucks Big Tym....
HTC service centre at mumbai sucks big time....
they said they can't replair my cell n it has a HARDWARE ISSUE!!!
stupid lasses....
What can we do here getting the same error....
Tried MMC method, nothing!
HOW CAN THERE BE NO SOLUTION TO THIS PROBLEM??????????
no have solution this problem ???
stupid ! CID area !!! STUPID HTC ---
Hi,
I have HTC x7500.
As far as i understand i can find the ROM and Radio version from boot loader screen.
But Boot loader screen shows alot of information.
For example
M 0A
S 02
G 00
B 06
1.25.01
R 1.38.00.00
G 32
I assume my Rom version is 1.25.01.
Can you someone please confirm this before i brick up my HTC x7500.
Thanks for help
Best Regards
your radio is the one after R in your case 1.38
you can also find them both in start>setting>system> device informaion
mine is
ROM verson: 2.35.110.4
ROM date: 10/09/07
Radio version: 1.57.00.00
dont forget to use AthenaUnlocker befor you start
Thanks Mate for getting back to me.
How can i check if i need to use the AthenaUnlocker.
because i have tried using different network sims and tehy seem to be working OK.
http://forum.xda-developers.com/showthread.php?t=429013
rizzir said:
Thanks Mate for getting back to me.
How can i check if i need to use the AthenaUnlocker.
because i have tried using different network sims and tehy seem to be working OK.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=429013
have you read this?
Thanks lakeman,
I have read it now.
I thought unlocker was for removing Network Sim lock like mobile.
I guess I have to unlock it If I want to use any unoffical ROM.
it will sim unlock it but it cid unlocks it also, you will have all kind of problems if you dont
if you would like me to upload what i have to rapid share with a how to step by step just give me a shout,
beta still ill upload the unlocker and radio rom 1.57 with the updater program aswell,
ill have the link up in a bit eastenders is on
http://rapidshare.com/files/165780072/radio_upgrade.rar.html
that has the unlocker and radio rom 1.57 with the update program,
dont forget to use the unlocker all 3 steps,
to upgrade the rom just click on ROMUpdateUtility and follow the on screen steps, and make shore you battery is at least 80%
hope all go's well
Thanks bow9487
you been very helpfull.
I have managed to Unlock and upgrade the Radio.
Is there anyway to check these details from the windows mobile 6.00 instead of reboot screen.
yep
you can also find them both in start>setting>system> device informaion
it will display it all there
glad it went well, every time i do it with one phone or another in shaking like hell, lol
True,. It is expensive toy to have
or an expensive paper weight if you get it wrong
hello all i have dj steve's 2.2 rom and having trouble putting my unlock code in that i just got i put a non 02 sim in me streak but it wont show the unlock screen can any one help me out please thanks.
Hi. Can you boot directly into the Home Screen with your new SIM card in the phone? If you can, then maybe it's already network-unlocked. Just a maybe.
This happened to me as well and I had to flash stock rom so that the unlock screen would show.... As far as I know there is no other way to do it.
thanks but the phone wasnt unlocked before i dj steved it but yes it boots to the home screen i spose i will have to put stock rom on it i have spent ages updateing this to 2.2 as i can not run comand lines from my computer any one know where i can find a 1.6 or 2.1 02 offical zip thanks
Not Android Development
Please Post in the Correct Forums
Moving to General