hey guys im having a problem flashing the hard spl when ever i try it tells me i have a bad usb connection please help thanx!
VoLoDaR1 said:
hey guys im having a problem flashing the hard spl when ever i try it tells me i have a bad usb connection please help thanx!
Click to expand...
Click to collapse
Are you right clicking and running as administrator? Try a different USB port, preferably one that's on the back.
yeah thanx but i figured it out it was very very simple after i got the error message i just tried it again and it worked lol simple fix
Related
hi guys
i have problems with my cingular 8125, i had problems with touchscreen so I opened it cos i thought i'd clean it and resolve the problem.. but I wasnt able..
anyway, I put all pieces together and now it wont recognize on my pc.. i tried reinstalling activesync but it didnt work.. since I need to perform a ROM update, i dont know how can i make it now.. I checked once more the miniusb plug, and its okay... did i bricked smthg in it? when i load bootload mode and connect USB I see USB icon on the bottom of lcd screen, but when i try to run RUU, i get error 260...
how can i flash this friggin ppc? I have no warranty and i still have problems with touchscreen, now even USB...
any help appreciated..
thx
l8r
Try reinstalling the standard Cingular/HTC ROM. I had a similar problem, searched tips, and this worked for me, and I could once more go to any ROM I wanted.
i tried that.. tried hard reset dozen times... tryed unchecking all usb connections in AS and than plug in but it wont help...
it gives me USB device not recognized... cmon guys, help me....
im out of ideas...
ive tried reinstaling AS many times, doesnt help..
sell it to me for $20
hiimcliff said:
sell it to me for $20
Click to expand...
Click to collapse
Wow... that was useful comment...
You could try booting into Safe mode, open up device manager and it will show you all your USB devices, even the ones that are disconnected, uninstall all the activesync/wizard ones and then reboot. Worth a try.
hiimcliff said:
sell it to me for $20
Click to expand...
Click to collapse
sure I'll do, if u r willing to pay for shipping around the globe...
I couldnt flash Hardspl any more.
I couldnt install either cooked rooms or original one.
All I see is the tri color screen with the following informaiton:
PLA100
SPL-1.25.0000
CPLD-2
Can you please help?
osama966 said:
I couldnt flash Hardspl any more.
I couldnt install either cooked rooms or original one.
All I see is the tri color screen with the following informaiton:
PLA100
SPL-1.25.0000
CPLD-2
Can you please help?
Click to expand...
Click to collapse
please search before posting a new thread!
http://forum.xda-developers.com/showthread.php?t=425922
nicandris said:
please search before posting a new thread!
http://forum.xda-developers.com/showthread.php?t=425922
Click to expand...
Click to collapse
I saw this yesterday, and I give it a try, the only issue I have is I have windows vista, so there is no active sync.
I tried to kill the process using ctrl Alt Del in order to see the USB port but I couldnt managed to do that.
Under windows Vista its called 'Windows Mobile Device Center' (wmdc.exe).
I tried everything
Dear All : I tried almost every thing mentioned in this subject over 4 or 5 threads ,I'm still not able to connect through USB ,I tried MTTY and also I can't see the USB in the available ports ,I tried with winXP and killed the activesync processes and tried with Win Vista and also killed the WMDC process BUT no way I failed.
At the boot screen I have the following
Pola100 MFG
SPL-2.20.oliNex
CPLD-2
Anyone have a solution please I use my Polaris in managing my business and now I;m in deep ****
hamed_marie said:
Dear All : I tried almost every thing mentioned in this subject over 4 or 5 threads ,I'm still not able to connect through USB ,I tried MTTY and also I can't see the USB in the available ports ,I tried with winXP and killed the activesync processes and tried with Win Vista and also killed the WMDC process BUT no way I failed.
At the boot screen I have the following
Pola100 MFG
SPL-2.20.oliNex
CPLD-2
Anyone have a solution please I use my Polaris in managing my business and now I;m in deep ****
Click to expand...
Click to collapse
i can see that hardspl is installed. did you tried flashing from sdcard?
i have had problems with stuck in bootloader (3 color) mode and also the prob with mtty in win vista...i try it on winxp and wow...it goes...
You use it to manage your business? Next time, dont mess with the ROM on your phone then
You seem to have SPL on the device. Try a different USB cable perhaps for connectivity.
nicandris said:
please search before posting a new thread!
http://forum.xda-developers.com/showthread.php?t=425922
Click to expand...
Click to collapse
i have the same problem and i tried this and tried almost all other bootlaod related threads and nothing worked, i have win xp and i can use the software advised but after everything works and the devise restart nothing happen and here we go to the same bootload three color screen.
what is shows is the following:
POLA100
SPL-1.28.0000
CPLD-2
the funny and wierd thing is that this happened without any notice and not during flashing or upgrading, i left the phone on the table and came back to see it stuck in the bootload screen
please help guys ..i spent till now 6 hrs with no benefit .... im a normal user
nicandris said:
i can see that hardspl is installed. did you tried flashing from sdcard?
Click to expand...
Click to collapse
I tried flashing from SD card and I had only the tri color screen with the data mentioned before and nothing happens,I tried use MTTY and I could never have the USB port listed in the drop list.
Thanks for your concern and in advance
wesram said:
i have the same problem and i tried this and tried almost all other bootlaod related threads and nothing worked, i have win xp and i can use the software advised but after everything works and the devise restart nothing happen and here we go to the same bootload three color screen.
what is shows is the following:
POLA100
SPL-1.28.0000
CPLD-2
the funny and wierd thing is that this happened without any notice and not during flashing or upgrading, i left the phone on the table and came back to see it stuck in the bootload screen
please help guys ..i spent till now 6 hrs with no benefit .... im a normal user
Click to expand...
Click to collapse
guys please helpppppp
up
hey ım usıng touch cruıse
pola100
spl 3.13.00
cpld-2
my cruıse not oen ower.always bootloader trı color .usb ok but ofıcıal rom ınstallıng problem yüzde1 later shuttıng.what must ı do?
Hi guys,
my touchscreen seems to be broken and I wanted to restore the original spl from my polaris. Well, I connected my device to active sync and all went fine. I have used the originalspl3.13.0000.zip, but everytime I tried this it ends up with an connection error while activeSync successfully connected to the device.
Thanks for your reply
Tom
Kreon said:
Hi guys,
my touchscreen seems to be broken and I wanted to restore the original spl from my polaris. Well, I connected my device to active sync and all went fine. I have used the originalspl3.13.0000.zip, but everytime I tried this it ends up with an connection error while activeSync successfully connected to the device.
Thanks for your reply
Tom
Click to expand...
Click to collapse
Hi Try it with SD method..that sould do the trick you find here how to
Succes
Greetz from Holland
jojo464 said:
Hi Try it with SD method..that sould do the trick you find here how to
Succes
Greetz from Holland
Click to expand...
Click to collapse
thanks for your quick reply. I'll try it out this evening.
greets,
Tom
hello i am new to this form if anymistake than forgive mee
i ahve updated my 02 xda exec it has not updated but i am stuck in bootloader screen i have used the tips given but i am not getting usb option in mtty utility and in other tool plz help i am using windows 7 plz help meee
plz help mee
i am gettion usb on top when i am connecting and i am getting v2.01 below plz help
Akthar4u said:
i am gettion usb on top when i am connecting and i am getting v2.01 below plz help
Click to expand...
Click to collapse
Try taking out the memory and sim card. That usually allows it to show up in mtty for you to restore it.
i have already done that
Try hard reset. If not returning you to the regular startup - reboot your computer, disable the USB option in AS and try flashing again.
did every thing but nothing is happing when i am trying hard rest it then nothing is happing plz help me out when i connect it is showing usb in xda its showing connected in my pc through removable disks plz help...
Sounds like you need reflash. Download some WM6.x rom found on this forum and follow the instructions. If you get stuck at some point try reading the wiki.
tell me how to reflash....
Akthar4u said:
tell me how to reflash....
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Uni_ROM_Upgrade
hey guys i need help i recently flashed to cloudyfa 2.3 rom and im having problems with it. so i decided to switch over... but in unable to do so because whenever i connect my device in SPL mode to flash rom... i hear the attachment of usb sound but the serial on bottom of screen doesnt change to USB and so forth i cannot flash any rom....
i have HSPL 1.56 .....
hispeedworm said:
hey guys i need help i recently flashed to cloudyfa 2.3 rom and im having problems with it. so i decided to switch over... but in unable to do so because whenever i connect my device in SPL mode to flash rom... i hear the attachment of usb sound but the serial on bottom of screen doesnt change to USB and so forth i cannot flash any rom....
i have HSPL 1.56 .....
Click to expand...
Click to collapse
hmmmm maybe a strange thing but could you try a usb port that is directly connected to youre mobo like one of them on the back of youre computer and if that doesnt help try a differnet cable on that port
miniterror said:
hmmmm maybe a strange thing but could you try a usb port that is directly connected to youre mobo like one of them on the back of youre computer and if that doesnt help try a differnet cable on that port
Click to expand...
Click to collapse
hey chris... glad to see you here... but unfortunately i tried both... different ports and different cables.... the problem still remains... and the worse part is that the current rom im using its not working on my cell at all... cell freezes more than randomly and doesnt even restart. i have to take the battery out wait 10 secs than reinsert to start it again and it keeps messing up my clock time to plus 1 hour even though daylight saving is turned off in this rom
EDIT: Fixed the problem...somehow my htc driver on windows 7 had gotten corrupt... deleted it and reinstalled the drivers and its working fine now... thanks alot for the help CHRIS