Has anyone noticed if you press on the glass that it moves? Is this normal?
It seems far more pronounced at the top left of the glass screen.
rashlan976 said:
Has anyone noticed if you press on the glass that it moves? Is this normal?
It seems far more pronounced at the top left of the glass screen.
Click to expand...
Click to collapse
This has already been Talked about HERE Mate
lufc said:
This has already been Talked about HERE Mate
Click to expand...
Click to collapse
Thanks but that thread is on about the movment of the plastic. On my Streak the glass moves if pressed and i'm just worried that it's going to start getting bits under the screen.
rashlan976 said:
Thanks but that thread is on about the movment of the plastic. On my Streak the glass moves if pressed and i'm just worried that it's going to start getting bits under the screen.
Click to expand...
Click to collapse
To true getting tired i need a holiday, but anyway what i notice is when i put my back on and press down on the back to slide it up i can hear the screen creaking as if is popping up and down on the glue
i think its a joke how the forum seems to have a "it will do" attitude. I think its pathetic how these things are built! I shouldnt have to pay £400 for something thats built poorly. Yes the screen not being flush with the plastic or the screen moving or making creaking sounds may "not bother you" but it will when three months down the line things stop working like the phone speaker which has happened to a few already. Im sure by then because they wont see this as a MAJOR fault dell will just say..you dropped it and broke it.
Need a petition because I have real OCD with this phone and i want it PERFECT!.
sottyc said:
i think its a joke how the forum seems to have a "it will do" attitude. I think its pathetic how these things are built! I shouldnt have to pay £400 for something thats built poorly. Yes the screen not being flush with the plastic or the screen moving or making creaking sounds may "not bother you" but it will when three months down the line things stop working like the phone speaker which has happened to a few already. Im sure by then because they wont see this as a MAJOR fault dell will just say..you dropped it and broke it.
Need a petition because I have real OCD with this phone and i want it PERFECT!.
Click to expand...
Click to collapse
I must admit that i totally agree and i'm already on my fourth Streak. Problems with them so far have ranged from the screen not turning on, loose ear piece and one with a constant flickering screen. I'd like to send this back but with so much time having passed the best i could hope for is a refurb
sottyc said:
i want it PERFECT!.
Click to expand...
Click to collapse
Nothing will ever be perfect, what a childish request. Considering how thin the Streak is, of coarse it will wear under any semi-hard conditions like sliding the battery cover on if not held properly. You may even be flexing the screen on accident in your pocket or while using.
Sent from my Dell Streak using XDA App
Muo said:
Nothing will ever be perfect, what a childish request. Considering how thin the Streak is, of coarse it will wear under any semi-hard conditions like sliding the battery cover on if not held properly. You may even be flexing the screen on accident in your pocket or while using.
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
No I dont even put it in my pocket. Iv kept it at home in its little case, reason being I use a normal phone when out and about untill I get 2.2 on there.
Fair enought I dont want it perfect but its still a ISSUE...it wont be untill people realise that all these phones mess up in a years time due to this little issue. The side can only get more and more raised it wont fix itself magically.
Its like you going to buy a brand new car and finding the front bumper is slightly out of line...are you going to just put up with it?
Its even been mentioned on some forums as maybe the reason its not released in the US. I mean people over the pond dont have the ****ty "it'll do attitude" they have the "if I dont get what I pay for I will sue" attitude which a much more prefer!
Its a HUGE defect for the screen to be dodgey and the top plastic half to be pealing off!
How are people on their 4th streak? What the hell are you doing to them?
I've had my streak for about 2-3 weeks now. No creaks, no loose fittings, no non-working speakers. not sure why i'm bothering listing things as everything about this phone is brilliant (except the camera )
Best build quality of any phone i've ever had. Good job dell i say.
Its inevitable that a phone so big and so thin will get bent and twisted and will wear as a result. With regards to the quality issue its mostlikely due to the mass production of the phone as cheaply as possible. Although I agree the quality of the streak is fantastic it's also inevitable that some will be defective
Sent from my Dell Streak using XDA App
No problems here thus far all good
I've just watched that video where the streak is taken apart and i've come to the conclusion that its probably the glass and screen moving as one inside the case on the back. Hopefully this is the case as it would mean that the glue between the glass and screen is fully intact and could also explain the cracking the other poster was experiencing.
what the people with the "good" phones dont seem to understand is the difference between wear and just coming out of the box. These problems with the screen being flush have been since opening the box and not after use...
In a previous thread I stated how overpriced I thought the dell polyurethane case was and it is however one unexpected side effect it seems to have is the way it grips the streak seems to strengthen the device as it adds an extra rigidity to it so and it will be less likely to flex.If you carry yours in your pocket I would suggest you consider the case as it does provide protection from potential movement and flex
Related
I'm starting this thread as a central database for CDMA Hero owners to share defects and bugs in Hardware and Software.
My apologies if this has been addressed else-where.
Found with my Girlfriend's and my "with Google" Heros that we both have a noticeable amount of dust under the screen (glass). I thought this was addressed with rev. 2 of the phone?
Anyone one else with the same issue?
paint on case is VERY easy to chip...
I agree the finish seems a little delicate. I've been using a cheap hard plastic case since I got mine in dec. Helps alot with wear and tear, and isn't too bulky or hard to get out of my pocket.
i agree with the paint issue.
my end button is totally red not silver and red
I had a dust issue with my first (unbranded).
The first thing I did with my replacement (with google) hero was to apply an invisible shield to it. I have not noticed any dust under the screen whatsoever.
Also, although it isn't exactly pretty, I found while applying the invisible shield that it did not cover the gap between screen and button pad. As a quick fix to this I cut a thin piece of invisible shield material that was left over and applied it over the crack/screen protector/button pad protector. Just for some extra protection.
For shocks, I have the phone in the HTC silicone case. My phone has taken a number of falls/skids across the ground and stuff and this combo has protected it completely.
Edit:
Almost forgot, my original also seemed to develop a wear mark on the metal button pad finish. It was as if a part of the layer had rubbed off and tarnished in a circular pattern.
about the dust under the screen...
i contacted htc about before. the person who i emailed replied to me saying that htc has a permanent fix for the problem, so you can send it in and they'll replace/clean the screen and apply some fix to it. catch is, you have to pay for S&H and you'll go without a phone for a bit
justinisyoung said:
about the dust under the screen...
i contacted htc about before. the person who i emailed replied to me saying that htc has a permanent fix for the problem, so you can send it in and they'll replace/clean the screen and apply some fix to it. catch is, you have to pay for S&H and you'll go without a phone for a bit
Click to expand...
Click to collapse
I have a ridiculous amount of dust in the lower left hand corner of my screen... so much so that part of the screen isn't visible anymore. Do you think Sprint would just let me exchange it for a new one? Or would I still have to go through HTC?
mrinehart93 said:
I have a ridiculous amount of dust in the lower left hand corner of my screen... so much so that part of the screen isn't visible anymore. Do you think Sprint would just let me exchange it for a new one? Or would I still have to go through HTC?
Click to expand...
Click to collapse
well i e-mailed htc about this twice. the first time they said that if the dust got bad enough, i could send it to HTC and they'd repair it. they also said this:
I understand how frustrating it can be for dust to collect under the screen of your device. We have recently learned that Sprint has a process in place to resolve this issue. Please contact Sprint for the location of your nearest Sprint Service and Repair facility. They are equipped to clean your device, and in doing so will be able to keep the issue from recurring in the future. I apologize for any inconvenience you may have experienced.
Click to expand...
Click to collapse
which pretty much means that the sprint store should be able to repair it for free.
justinisyoung said:
well i e-mailed htc about this twice. the first time they said that if the dust got bad enough, i could send it to HTC and they'd repair it. they also said this:
which pretty much means that the sprint store should be able to repair it for free.
Click to expand...
Click to collapse
That's great to hear! Nice to know it's not like my Mogul was. They just kept giving me broken phones until I bought my hero....
I had heard about the dust problem before, and was glad that I didn't have that problem yet... After reading this thread, I decided to look again.... Now I do have dust in the bottom right
It seems to me that the problem is dust entering between the keypad and the screen, and then getting up underneath of the digitizer which doesn't seem to be against the LCD, which is strange, I think. Most handhelds I've taken apart have the digitizer glued around the edges directly to the LCD. Thank god that HTC and Sprint are actually addressing this problem. If someone does know how and where this seal is applied, I'd love to know. I might be taking mine back before too long, and I always would like to know what they're going to do beforehand.
beyondinferno said:
That's great to hear! Nice to know it's not like my Mogul was. They just kept giving me broken phones until I bought my hero....
Click to expand...
Click to collapse
OMG i loved the mogul till I realized the CPU was slow the whole thing was slow and in my 2 years i went through 8 of them. That was the best money ever spent on TEP
Seriously you guys should have no problem exchanging that phone in warranty without TEP IF you take it to the shop and they cant resolve your dust issue they will ship you a remanufactured phone.
justinisyoung said:
well i e-mailed htc about this twice. the first time they said that if the dust got bad enough, i could send it to HTC and they'd repair it. they also said this:
which pretty much means that the sprint store should be able to repair it for free.
Click to expand...
Click to collapse
This is 100% inaccurate. I'm a Sprint tech and there is no process in place for repairing Hero's with dust in the screen. Sure I can take your phone apart and blow the dust out, but it will come back.
clamknuckle said:
This is 100% inaccurate. I'm a Sprint tech and there is no process in place for repairing Hero's with dust in the screen. Sure I can take your phone apart and blow the dust out, but it will come back.
Click to expand...
Click to collapse
ffffffffffffuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu-------------
So is HTC actually 'fixing' the problem?
brian2220 said:
i agree with the paint issue.
my end button is totally red not silver and red
Click to expand...
Click to collapse
Same here. Otherwise no issues.
The stock roms sucks.
But seriously, same as everyone else
-Dust under screen
-Button paint chipping off
At least it isn't near as bad as the Touch Pro. My buddy and I both had one; he still has his... His volume buttons literally fell off, and all of the chrome stripping is held on with scotch tape. The sliding screen has a slight swivel to it. And, thanks to Microsoft, all of his texts are from 1016.
Actually, I'm considering taking my Hero apart and trying to figure out a fix on my own. I think I'll wait just a little longer... just to make sure nothing fails and I can't take it back. Or, is there anywhere I can buy those black stickers for the screw-heads?
I'm surprised none of you guys have seen this yet.
http://androidforums.com/sprint-htc-hero/22036-sprint-htc-hero-disassembly-diy.html
chococrazy said:
I'm surprised none of you guys have seen this yet.
http://androidforums.com/sprint-htc-hero/22036-sprint-htc-hero-disassembly-diy.html
Click to expand...
Click to collapse
OMG they murdered a Heroc!!!
thematrixkid17 said:
At least it isn't near as bad as the Touch Pro. My buddy and I both had one; he still has his... His volume buttons literally fell off, and all of the chrome stripping is held on with scotch tape. The sliding screen has a slight swivel to it. And, thanks to Microsoft, all of his texts are from 1016.
Click to expand...
Click to collapse
Interesting, I loved my Touch Pro, the only flaking or issues with the aesthetics I had were from where it met pavement once...there's also a .cab file your friend can download that will fix the date issue...I'd post a link but I'm not sure of XDA's linking policies to other sites, just google ".cab fix for touch pro sms date," it's one of the first results.
As far as bugs and manufacturer defects with my Hero go, I've had the phone for a little over a month now and haven't anything to report...it does lag a little at times but I've yet to find a rooting process that works for my Hero for whatever reason, it's the newest version with the "with Google" branding. The "one touch root" or whatever it was titled from unlockr didn't work, nor did the one I found on android forums.
I didn't get stuck in a bootloader or anything for either process, it's simply that neither one had any affect; I did follow both process to a "T." I'll get around to trying the tutorial I found on here (XDA) one day when I have time, although I must say, I kind of prefer the hacks and tricks of WinMo at this point.
Aridon said:
Same here. Otherwise no issues.
Click to expand...
Click to collapse
same, i just removed the foil completely. just have a red button now.
http://www.engadget.com/2010/06/13/htc-evo-suffering-from-glass-separation-issues/
I just read that and looked at mine. The glass is separating in the lower left corner.
Thank God I have 30 days to return.
I love this phone. I can get past the 16 bit resolution. The 30 fps cap is a little hard to swallow. But now this? Sigh..
Nothing wrong with mine.
If you have it, return it for a new one. No need for drama. There is a one year warranty for defects and 30 days risk free from sprint. Pick one or the other.
Most n1's have the same issue. I checked mine when I first got it. You can check if it really is separating by pressing on the corner of the screen and if you hear clicking then you need to use a hair dryer and get the glass hot. Then press down on the screen for 1 to 2 mins. I fixed both of my n1's this way.
Comrade P said:
Nothing wrong with mine.
Click to expand...
Click to collapse
Since yours is fine. Does the light leak at the bottom at all? Mine has all 4 buttons leaking but the lower left brighter, since its separation there is more pronounced.
bsanti said:
I just read that and looked at mine. The glass is separating in the lower left corner.
Thank God I have 30 days to return.
I love this phone. I can get past the 16 bit resolution. The 30 fps cap is a little hard to swallow. But now this? Sigh..
Click to expand...
Click to collapse
yeah, 1 yr manufaterer's warranty will fix this everytime, no charge to you, so I really would not sweat it . . .
or go pull out your hair dryer
Not having a phone for 2 months while waiting for htc to fix your phone is not going to work for me. Thats why I fixed my n1's myself.
I have this also... Slightly on the bottom corner... ugh. That iPhone is looking better and better.
Same issue here, glass is now raised above the bezel, any idea if they let you keep your sd card when you return the phone, not a big deal if not, but it'd be easier.
when you take a phone to sprint for manufaterer's warranty, they typically do not take your phone from you to repair it, they order in a replacement (typically refurbished) and you keep your phone while awaiting it's arrival. when it comes in to the store, they call you, and you bring your phone in for a swap.
wasn't knocking the blow dryer, I would probably try that before getting a replacement.
psufan5 said:
I have this also... Slightly on the bottom corner... ugh. That iPhone is looking better and better.
Click to expand...
Click to collapse
It sure does.
This happened to me once with my iPhone 3GS and I pushed it on the left corner like what its happening to the Evo, and it did the EXACT same thing. If not more.
I honestly never find out about these defects until I surf a tech site. Now I'm all paranoid. -_-;
Just like those who had the dust under the glass issue with hero's I'm sure this will be fixed in the upcoming batches.
Hope so anyway.
Checked mine and it seems not to move under pressure, possibly a tiny bit... The light only leaks if I tilt the phone and I stare down under the black towards the buttons, not sure if this is what you guys are referring to as the light leaking. No button shines more than the other either.
Damnit... I guess I'll attempt to have my phone replaced.
ReFLeX135 said:
Checked mine and it seems not to move under pressure, possibly a tiny bit... The light only leaks if I tilt the phone and I stare down under the black towards the buttons, not sure if this is what you guys are referring to as the light leaking. No button shines more than the other either.
Click to expand...
Click to collapse
This is how mine is too. If i look at the screen from a top down angle i can see light on the displays. I also see i can move the screen a fraction of a millimeter if press down near the 4 home buttons, but i would have never thought it was a defect. Just seems like enough movement for a sensor to feel it or something.
I have access to two Evos and neither one of these are leaking light around the bottom left corner (or any corner). They do give in the corners a little, not anymore than my iPhone 3G, however.
Has anybody actually talked to Sprint or HTC? I want to know what they plan on doing about this. My screen also is coming loose not that much light leakage though. Also the battery cover doesn't snap on tight. I have a Google I/O phone, hardware version 2. I had problematic with the battery but once I changed it to cdma I have had no issues thus far. I hope they(sprint OR HTC) plans on doing something. Also, if you do take it back to Sprint you'll probably get a new. I doubt they have refurbished phones already. And if they did I think that would worry me. Good luck to all having issues. BTW I still love this phone.
WOW everyday an issue comes up on the EVO,what is goin on?
Mine apparently is doing it also I didnt notice it until I looked in the dark. Mines mild right now, but its def coming up...
http://www.engadget.com/2010/06/13/htc-evo-suffering-from-glass-separation-issues/
psufan5 said:
Mine apparently is doing it also I didnt notice it until I looked in the dark. Mines mild right now, but its def coming up...
http://www.engadget.com/2010/06/13/htc-evo-suffering-from-glass-separation-issues/
Click to expand...
Click to collapse
not a big surprise. probably exactly the same crappy screen adhesion problems that were leading to all the dust under the nexus screens... :/
mine is starting to do it as well, I can feel it slightly raised above the bezel
What problems will manifest due to this problem?
regards
qu1nn
What problems will manifest due to this problem?
regards
qu1nn
Click to expand...
Click to collapse
Dust under the screen. And you can see light leaking out of the bottom of the phone
-------------------------------------
Sent via the XDA Tapatalk App
Wow this is totally sh*tty
I just placed my order for the Evo and should be receiving it sometime this week.
I am wondering if maybe keeping the phone in a tight-fitting silicone case might help to reduce any possible "DISPLACEMENT" of the screen
glad to see this is getting media attention. i'm sick of htc and their crappy quality control. i went through this whole thing with my hero already...
and yes, my screen is coming apart too. it definitely wasn't like that when i got it last week.
redrazr7791 said:
Wow this is totally sh*tty
I just placed my order for the Evo and should be receiving it sometime this week.
I am wondering if maybe keeping the phone in a tight-fitting silicone case might help to reduce any possible "uprising" of the screen
Click to expand...
Click to collapse
Yeah can't have the screen gathering up and revolting
mrono said:
Yeah can't have the screen gathering up and revolting
Click to expand...
Click to collapse
I couldn't think of another word to use
If HTC continues to mass produce phones that fall apart because of faulty manufacturing...then the customers just might revolt
Dang it!!! mine starting to raise up as well I love this phone and Sprint service but I'm afraid the problem will worsen up as the time passes. I'm not the type to switch devices after every new released and perfer to hang to something until I feel it's not doing what I ask it to (still have HTC Uni, 8525, Treo 750 and Axim x51v).
This and the 30 fps capped is my only main concern about this phone, especially this screen separation (more light leakage or dust problem). The rest of the problem doesn't really bother me much such as the laggy touch input, improperly grounded screen and other problem doesn't apply to my device.
Is it worth the hassel of exchanging it hoping to get one without the screen separation or do they all have this problem? I'm hoping the newer hardware version (version 3) doesn't have this sort of problem, mine is hardware version 2. What you guys think?
I have been noticing more and more light leaking. I thought at first I was maybe just getting paranoid (still possible) but I saw a line about 1.5 cm long along the lower left side last night... That was definitely not there before.
What should I do? Would getting the TEP plan be prudent at this point, to cover this issue if/when it gets worse? Or would be the kind of thing HTC would be more... lenient about replacements?
Think the hairdryer method will work like it did on the Nexus? My nexus had this issue and the hairdryer method fixed it up permanently.
booloobunny said:
Think the hairdryer method will work like it did on the Nexus? My nexus had this issue and the hairdryer method fixed it up permanently.
Click to expand...
Click to collapse
Doesn't hurt to try. If it worked on the NX-1, it might work again
redrazr7791 said:
Wow this is totally sh*tty
I just placed my order for the Evo and should be receiving it sometime this week.
I am wondering if maybe keeping the phone in a tight-fitting silicone case might help to reduce any possible "DISPLACEMENT" of the screen
Click to expand...
Click to collapse
I know this is off topic but...
How are you getting yours that fast? Where did you order from
booloobunny said:
Think the hairdryer method will work like it did on the Nexus? My nexus had this issue and the hairdryer method fixed it up permanently.
Click to expand...
Click to collapse
Yeah I actually just tried this and it worked pretty well only a little of leakage left, I figure I'll seal it up some more when I have the time and Im pretty sure I did not hold it down long enough to let it cool effectively. but the parts that are still down work like a charm. way better than having to go back, lose all your apps, headaches of customer service, etc.
BigBallin said:
Dust under the screen. And you can see light leaking out of the bottom of the phone
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
--------------
So this is the reason I see light under the buttons when their off and the screen is off, and its dark in the room? because my screen seems to be holding up well, and I have it in my pocket all day, no case or screen protectors. then again, I haven't been messing with it, trying to apply things or mods to it.
Hair dryer, bubble gum, tape and what else?! These are high-end devices (Evo Nexus One, etc) and they should NOT need a MacGyver handbook to keep them together after days of ownership. HTC needs to do right by us from the design stage period!
Dear Babies,
This is a site about hacking phones. Stop *****ing and use your brains for a change. Get some black silicon caulk from Lowes. Rub a small small amount in the crack where the buttons meet the case where the light leaks. Congratulations, your phone can now be left in the desert for 10 years and nothing will get through that seam including light... I swear, you guys can spend all day rooting phones but cant use some damn common sense to fix the hardware itself. I had tons of light leakage when i got the phone. Zero now, and you cant tell i did anything to it.
AshMa said:
HTC needs to do right by us from the design stage period!
Click to expand...
Click to collapse
This is very true, but there seems to be a gray area when it comes to (S*** HAPPENS and a bug that can be fixed)... And it seems to get grayer everyday.....
hair dryer seems to have worked fine on my evo
So I just noticed a decent sized scratch on my fascinates screen.
It's in the middle of the screen, and I can feel it with a fingernail. The phone spends all day in my pocket, and I baby it, so I'm surprised. Never been dropped or anything.
Though I know it's morally ambigious, I was thinking about returning it to verizon under the guise of faulty GPS/not getting a lock so I could get a new one with a clean screen.
Anyone know of any reason this wouldn't work?
If I do this or not though, will def be getting a screen protector.
reasons it wouldn't work would be if the rep there knows the gps problem affects all fascinate units so they may only offer swapping to a different model. Also, the devilish giggling sounds you make as you try to scam them might give you away.
good luck!
Worth a shot. I'll have to return to stock and see. Nothing really to lose beyond having to re root if they say no.
Sent from my SCH-I500 using XDA App
Let me know if that works lol
Sent from my SCH-I500 using XDA App
UPDATE:
Returned under the guise of malfunctioning GPS, no problem at all.
She checked to see if the update had been applied though, and it was.
If I do this or not though, will def be getting a screen protector.
Click to expand...
Click to collapse
On a related subject, whats the best screen protector? I would like one that covers the entire front. Also, I thought these screens were hard to scratch except with sand? I have no scratches yet.
I find this hard to believe....these phones have gorilla glass....same as iphone.....go google it and watch some youtube videos of people stabbing their phones. I will never use crappy screen protector again.....i swear they are a scam. Just my two cents.
Sent from my SCH-I500 using XDA App
umm teeharding... gorilla glass isn't indestructable :/ I'd like to see a youtube video of someone rubbing sand paper on a display and then we'll talk.
how are screen protectors a scam when they tend to the need for which you bought them? sure we can say they are costly, but thats just one of those inequalities in life we should learn to deal with in a capitalistic society. :/
I can assure you that it is possible to scratch Gorilla Glass, as I did it.
What exactly did it? Couldn't tell you, but I was careless and overconfident in the GG, and had it in my pocket with keys and my headphones, and it was scratched up in a few weeks, though only one scratch was deep enough to feel with a fingernail.
Since I've gotten the new phone I decided to order the realook screen protector from amazon, and it has its own pocket, free of anything else. besides my wallet (leather, no metal or edges).
Trust me, I don't need to google the greatness of GG, I've had my own real life test done, and it failed. Phone was never dropped or handled roughly.
Yikes. Glad I got an Invisible Shield installed. So how is the new GPS? I'm considering returning mine as I also have GPS issues. It scared me when I read that it may be a hardware issue on these forums today.
poisonousjuice said:
reasons it wouldn't work would be if the rep there knows the gps problem affects all fascinate units so they may only offer swapping to a different model. Also, the devilish giggling sounds you make as you try to scam them might give you away.
good luck!
Click to expand...
Click to collapse
If its a known issue with the unit it specifically means they will NOT exchange the device. And def not for another one, given its the 1st one.
You will be told to wait for them to release an update that "fixes" the issue, and at which point, it doesn't, THEN the device is swapped out, for another identical model.
You can try returning the phone at that point, and depending who you get or what not, they may waive the restock fee, especially if you point out that you're returning a phone for an issue thats CLEARLY not your problem, and mention that the rep who sold you the phone didn't point it out.
@ [OP] How did the realooks do for you?
good day.
A simple question: is there any possible way to tighten the slide on the DVP? Basically, my top face is a little loose when the phone is in the closed position at the bottom right hand corner. I think it got a little loose when I was prying off the Otterbox case.
I'm guessing not, but I just wanted to know if someone might have figured out a way. I'm getting some screen burn-in anyway, so I might exchange the phone for that.
I'd be intersted to know as well as the screen on mine has gotten pretty loose over time. The screen moves noticeably when pressing on the bottom when closed. This happened just from everyday use.
I'm surprised that you mention burn-in as I didn't think that was possible with an OLED screen.
Not sure on the slider, but slight burn-in is normal on OLED screens. It will go away as you let it sit on the new screen for a while, but it is a part of the organic nature.
http://en.wikipedia.org/wiki/Organic_LED#Disadvantages
my dvp was crappy from day one.
the slider mechanism is cruddy. ive even try to talk some sense into people about how the quality was poor.
everyone just blew me off as if it was fine.
thing is, it was probably loose all a long, you probably just didnt notice it.
most people dont notice these things until something happens to it, then they blame THAT instead.
look at my threads ive created .
I have to disagree, mostly because I remember not having any problems with the slider mechanism at first.
And then I tried to pry the case off to show it to a friend, and did it in a rush, and thus, remember noticing how much it was shifting irregularly.
Everyone's not in a conspiracy to prove you wrong, lemonspeakers. We're just not all going to have the same experience.
Frazzell, I know a certain amount of burn-in is normal, but I have mine set to black out after a minute anyway. A phone conversation with Dell revealed that they do, in fact, cover AMOLED burn in for replacement anyway, so might as well take advantage of it.
Desynthesis said:
A phone conversation with Dell revealed that they do, in fact, cover AMOLED burn in for replacement anyway, so might as well take advantage of it.
Click to expand...
Click to collapse
If you do exchange it, be sure to test the replacement to make sure it's stable. I had gotten a replacement due to dust and the loose slider, but the replacement locked up like crazy. I ended up keeping the original for now. I am beginning to think the dust and loose slider are inevitable.
pjfan75 said:
If you do exchange it, be sure to test the replacement to make sure it's stable. I had gotten a replacement due to dust and the loose slider, but the replacement locked up like crazy. I ended up keeping the original for now. I am beginning to think the dust and loose slider are inevitable.
Click to expand...
Click to collapse
Of course--it's the reason I'm not doing it immediately. Really, I think I made the mistake of wrenching the thing with my hands as I tried to pry off the Otterbox case, which is why I think this has happened.
In your first post, you pretty much exactly describe what I noticed (that is, if I close the phone and push the bottom right corner, there's some looseness clearly apparent). However, it's only in one corner. I'll have to give it some thought.