Database Users

Please Help. Can't get past white Samsung Vibrant Screen.

I followed the instructions from here ( http://forum.xda-developers.com/showthread.php?t=743769 ) up until flashing the actual zip and forgot I put the zip on my external sdcard rather than "internal" sdcard. Now my phone won't get past the initial white Samsung Vibrant screen. Also, I can only get into stock recovery. After clicking "reinstall packages" it just reboots and brings me back to stock recovery. Please help. Thank you.

You will need to flash back to stock then you will have access to your phone again.. you will have to start over to flash that rom. after you flash back to stock using odin
use this thread
http://forum.xda-developers.com/showthread.php?t=734475
You will need the right windows drivers so Odin will see your phone pick them up here.
Windows 64bit
Windows 32bit
Directions posted by setzer715
1. Put your phone in download mode by plugging it in and then holding Vol Up+Down and Power. As SOON as the screen goes black release power but NOT Vol Up+Down.
2. Launch Odin
3. Unplug your phone.
4. Load the pit and pda files into odin.
5. Plug your phone back in. You should now see one of the small blocks turn yellow and show you the com port. If not, something is wrong with your drivers.
6. Click start. If it flashes, great. If it hangs at File analasys then repeat 1-5.
6a. If Odin hangs at cache.rfs then move on to 6b.
6b. Unplug your phone (Odin will say it was removed) and remove the battery. DO NOT SHUT DOWN ODIN!!!!!!
6c. Put the battery back in and plug it back into your computer and put it back into download mode using step 1.
6d. Press start on Odin and it should now flash.
Also if you continue to hang at cache.rfs I found that if you delete s1_odin_20100512.pit then copy a new copy of the file over to your odin directory it seems to work fine after that.

Damn it.Thanks....

vol dn+up should get you to the stock recovery util right? the yellow and blue one?
edit: nvm, scare is over lol

On step 6d, where it says to press start again on odin, odin does not let me do this. The start, reset, pit, pda, etc... buttons are grey and will not let me press them. Help!
EDIT: also gives me a message in the upper left corner that says "CACHE" if that helps (in the far upper left box above where the yellow COM3 thing was.

bumpbumpbump

$iMoney said:
On step 6d, where it says to press start again on odin, odin does not let me do this. The start, reset, pit, pda, etc... buttons are grey and will not let me press them. Help!
EDIT: also gives me a message in the upper left corner that says "CACHE" if that helps (in the far upper left box above where the yellow COM3 thing was.
Click to expand...
Click to collapse
You need to delete your s1_odin_20100512.pit file and then extract a new copy to the odin folder then flash again. happened to me and that is all I did to fix it. step 6d did not work for me has well.

Hmmmm it's still not working. Would it help if i made a video showing what i'm doing then you can look it over and tell me if I'm doing something incorrectly? Also maybe I should be more clear. There is no way for me to start the flash again after removing my device as per step 6 without having to completely restart odin, thus restarting the process.

Update: Still not working. Really need a fix for this. Is there another way to un-brick my phone?

EDIT: To clarify, my problem was getting stuck as Cache.rfs and never going past that. I did try the previous steps listed in this article, as well as trying to reinstall all drivers and even using different Odin copies from other threads (even though they were all the same Odin 3). No .pit file seemed to work for me. Also, I'd like to point out that I have this issue with my netbook, but my work computer where I've done all my Odin flashing before did not have this issue, and I could use the .pit files perfectly fine.
First off, I'm not anyone special (I guess depends on the meaning of special), I don't dev... I play around. That's all. So take this all with a grain of salt.
I had the same issue, and have spent all night trying to fix it. Just now I didn't use the .pit file at all. Just the .tar in the PDA slot. Immediately went through and reflashed everything and I am fully up and running.
I can't guarantee that I don't have some kind of issues now but I am now back at my home screen and the phone seems to be operating fine.
The files I used are as follows:
Stock 2.1 firmware for the Vibrant: http://forum.xda-developers.com/showthread.php?t=739091
Samsung studio 7 (seemed to get Odin to recognize the phone without having to disconnect and reconnect, thought it might have something to do with the issue, though not sure): http://www.4shared.com/file/117435710/3d286573/Samsung_PC_Studio_72249.html
And the Samsung USB Drivers: http://forum.xda-developers.com/showthread.php?t=728929
Now, if a real dev can tell us what happens when you don't use the .pit file, we can know if there is any longterm repercussion from this. Short term though, working like a dream. I hope this helps, because being stuck without a working Vibrant sucks!

ODIN is a pain but I've found a way to get it work pretty consistently for me. Whenever you flash a ROM or back to stock, always make sure you enable USB debugging, and have adb working on your computer.
Open up your command console, plug in your device, open up ODIN, and type "adb reboot download". ODIN should recognize your phone when it restarts and a COM will light up.
From my experience, ODIN recognizes the devices better this way and hasn't hung for me so far (granted it's only 3 times). When I was booting into download manually and then plugging in the USB, it would hang at cache.rfs. If you don't have USB debugging enabled, then only thing you can do is keep retrying over and over. Took me like 15 tries once before it finally ran.

Can't thank you guys enough. Phone is back to normal! As soon as I didn't use the pit file it worked like a charm.

hey...i'm in the same situation as you...i can't get it to work...i'm trying to do just the tar file right now but it still hangs on cache.rfs how long did you have to wait?

$iMoney said:
Can't thank you guys enough. Phone is back to normal! As soon as I didn't use the pit file it worked like a charm.
Click to expand...
Click to collapse
which firmware did you use? did you use the true stck 2.1 firmware?

tq745 said:
hey...i'm in the same situation as you...i can't get it to work...i'm trying to do just the tar file right now but it still hangs on cache.rfs how long did you have to wait?
Click to expand...
Click to collapse
It should go right away. If it's hanging at cache.rfs, then it's not working. I really think its a drivers issue with ODIN. Just keep restarting your phone and ODIN and retrying.

I used the tar file that is linked to from the second post on this thread. I didn't even download what you linked me to, I just didn't use the pit file, like you told me and it worked with the files I already had.

My phone will absolutely not go into download mode. Is this a sign of some other problem or am i just out of luck?

ahhduy said:
My phone will absolutely not go into download mode. Is this a sign of some other problem or am i just out of luck?
Click to expand...
Click to collapse
how are you trying to get into download mode?

skater4690 said:
how are you trying to get into download mode?
Click to expand...
Click to collapse
Holding down + power when turning on, tried other varients like volume up instead of down, usb connected or usb not connected etc.

ahhduy said:
Holding down + power when turning on, tried other varients like volume up instead of down, usb connected or usb not connected etc.
Click to expand...
Click to collapse
ok try this...
1)plug into a usb with power
2)wait for the battery to show up
3)hold power and both volume buttons
4)wait for the vibrant screen to flash twice it will go once then seem like it turns off but then pops up agian
5)after it turns off the second time release the power button but still hold the volume buttons and you should be in download mode now
REMEMBER TO HAVE THE USB PLUGGED INTO THE COMPUTER AND YOUR PHONE!!!

did lag fix now stuck on black screen!

ok..im new to the galaxy and android phones .. i bought the phone rooted..not sure all what it had but i was running i believe a different rom on the phone, 2.1 update 1 i believe, it had rom manager and clockwork recovery on it, anyway .. i tried doing the lag fix and now the phone just turns on and stays on black screen.. keys at the bottom stay lit up also.. i can get into recovery but not really seeing anything in there that is helping.. can i factory reset or something from this recovery screen? like i said im not real familiar with these phones but im good with directions so if someone can explain how to fix this that would be great! thanks!

Hi, did you try using odin to flash back to stock?
the files you need to flash are in this thread
forum.xda-developers.com/showthread.php?t=734475
Also make sure you have samsung drivers installed on your computer. Which can be located here forum.xda-developers.com/showthread.php?t=728929
A stable version of odin is in this thread
forum.xda-developers.com/showthread.php?t=790026
steps
1. you will need to download odin..open it
2.Make sure your phone is off. connect your phone via usb and get into download mode(hold the volume keys+power when screen turns black let go of power button) now you should see a yellow triangle with android icon
3.to make sure your comp recognizes the phone.. pull out usb and put it back into the phone.
4. look at the first link i posted and flash the files accordingly and you should be good to go.

ok..i will try it. unfortunately i use my phone to tether so now im back on my blackberry which is SLOW.. odin is saying like 4hrs to download..loL!

I had the same issue. It sounds like you didn't install a BusyBox version that has extfs support built in. I could swear that the lag fix option I pulled down was supposed to have it, but it didn't. If you made a nandroid backup before you tried this, you should be able to get into recovery and restore. If not, you'll have to get to download mode and Odin flash back to stock.
If your phone is hardware locked, with the state your phone is in, you SHOULD be able to do an "adb reboot download" or "adb reboot recovery" to get into those modes.

[Q] Really Bricked Defy

Current Situation:
When I say bricked, I mean BRICKED in all caps. The phone is completely unresponsive. If I try to turn it on – no good. If I try to put it in bootloader mode – no response. If I hold the volume button down and depress the power – no menu displays. I get no ‘M’. I get nothing. Except…
If I fire up RSD Lite 4.9 and plug in the phone, it does recognize something. Under model it displays “S Flash OMAP3630”. If I load up an sbf file (I’ve been following Higgsy’s incomparable “How To” guide - http://forum.xda-developers.com/showthread.php?t=853674 and using the generic UK sbf file he recommends) and depress “Start” within RSD Lite, the phone will display “SW Update In progress…” in white blocky text. RSD Lite says it’s executing and, after several minutes will display a Status of “Finished” and a Result of “PASS”. On the phone, the screen goes dark but a white notification light displays. While the phone is still plugged in, I can depress the power button on and off and RSD Lite will recognize it’s there (if it’s on) or not recognize the phone is there (if the power is toggled off).
Note that the battery is fully charged.
I’ll give you a little background info:
Background:
I purchased Defy phones for my wife and me for Christmas. Her’s is working fine, is unrooted, and has only a few apps beyond stock (Angry Birds of course!). But of course I had to play with mine. All went well until I (stupidly) installed the latest T-Mobile update which removed my root access. This was not acceptable to me as I had overclocked my phone for performance purposes. I had a really hard time getting root access back until I at last found a version of SuperOneClick that did the trick.
By this time I had reset the phone back to factory settings. So I thought “Well, I might as well flash some cool ROM”, so I flashed a Gingerbread themed Froyo cooked up for the Defy. Unfortunately, it didn’t work (for whatever reason). I was stuck at the dreaded ‘M’.
Next I started following Higgsy’s guide (as mentioned above) but I guess I screwed something up because now the phone is totally unresponsive except as detailed above.
So where do I go from here? Some possibilities:
Flash T-Mobile 2.2 test sbf?
Link?
Flash Original SBF?
Link?
I’ve still got my wife’s phone which is working perfectly fine. Is there a way to copy files from her phone to my dead phone and get some life?
Do you guys have some other steps you’d recommend?
I’d really like to get my phone working again and would much appreciate the help. Many thanks in advance.
(Note that I’m a Noob so please don’t assume I know anything!)
(Yet another note: I'm in the USA.)

Which .sbf's and in which order did you install them?
The same happened to me after I'd flashed the 3.4.2 sbf, then tried to downgrade back to 2.34. it went blank and I had to reflash 3.4.2 again.
If you've flashed 2.51 or 3.42 then you can't downgrade from them. So the fix would be to flash the same rom again.

I have the same problem and this how i fix it
1.http://forum.xda-developers.com/showthread.php?t=892026&highlight=low+battery your phone will show in rsd lite
2.flash http://forum.xda-developers.com/showthread.php?t=933555 with him you get a error that can not be installed
3. disconnect phone from USB and remove the battery
4. Replace the battery in the phone and power up, and phone immediately go into the bootloader
5. Flash bootonly http://forum.xda-developers.com/showthread.php?t=899450
6. and finaly flash http://forum.xda-developers.com/showthread.php?t=922430
it works for me
sorry for bad english

Solved
I flashed http://forum.xda-developers.com/showthread.php?t=922430 per your suggestion and I'm now up and running. Thank you.

Motorola Defy bricked
hi
i have a question about my defy. The white led is still shining but there is no connection to the pc. I connected via USB-cable.
pls HELP!!!!!

I have a similar issue as the OP..
I originally rooted the phone using simpleoneclick... then I overclocked it using setvsel...
it was running fine for an hour or so, and then I ran quadrant (several times over the course of the hour) and the final time, it rebooted during the middle of a test, and then it would just keep looping the bootup moto logo and "android" screens.
at that point I could still enter the bootloader and recovery screens. I tried wiping data and resetting to factory defaults with no avail.
Finally I followed a thread on flashing a new rom to the phone with RDSLite and the uk rom. After getting it to finish flashing and it showing a 'Finished' and 'PASS' status as the OP mentioned, te phone now no longer responds. Power button does not trigger the screen to go on, regardless of if I try to press the volume buttons with it or not.
The only response I get from it is when it is connected to the computer, the white led turns on, and the computer (and rdslite) recognizes it. I can still flash it with rdslite and the screen turns on displaying the SW update In progress message...
but that's about all I can get it to do.
Any help and advice would be greatly appreciated
edit: I should also mention that after the uk 2.21 rom I've also tried the china 2.2.1 roms.... Should I also try flashing the 2.51 uk version as well?

Okay, I tried a few more roms and this one "JRDNEM_U3_3.4.2_117-00..." has everything back up and running...
however now i'm running into the issue of apps that i've 'downloaded' not actually installing...

bricked
same problem here. rsd can detect my phone but still failed flashing. i changed and renamed the /sbf but still doesnt work... please help

MB525 Defy Bricked
MB525 Defy bricked and rsd cannt detect my phone failed . ... please help
its dead. Actually i uninstalled busybox and in this process all the system files also deleted by busybox. now phone is not starting. if anyone can suggest. I was using MIUI rom. can any one make it alive again.
[email protected]
. ....please help

Same problem here, but my phone is only detected by a friend's laptop. I think I have to flash Defy+ rom

try to flash sbf use rsd

If your phone is detected by RSD Lite, then you have an easy fix in just flashing a new sbf. If it's not detected and you can't charge your battery, you're going to have to use the MacGyver method.

if sbf doesnt work u better send it to warranty

Well. On my computer the phone isn"t even recognized. Maybe because some RSD Lite files are missing and it need them to detect bricked defy (i did reinstalled RSD Lite)

If it's recognised on your friend's computer but not on yours then it means that you probably have the versions of the motorola drivers or rsd lite that have problems.

white led solution
hope for defy with only white led light turning on. This assumes that you have already have mototola drivers and RSD lite installed.
Background : I only had defy one day when I decided to flash it with miui. I bricked on the first time with bootloops. Did research and got drivers and rsd lite. managed to find three stock t mobile roms and flashed to stock Tom, then flashed miui, since then I've been switching between miui and cm7.
Problem : After a few months of use, I decided to flash stock rom to see how the battery life would be like. Bricked it the first time with bootloops. I thought I had flashed it with wrong rom because the first time I flashed back to original rom I did not delete the roms that I thought were the original roms. So after first failure I tried to flashed with the other roms I had. after the third rom it would not go into bootloader, only white led would turn on. Tried macguiver, did not work so save your usb cable, don't mess with it ain't gonna work.
Two part solution: I realized that when I plugged phone with usb I would hear the usb tone on win 7. When to device manager and saw the other device or something like that was appearing and disappearing when I would connect and disconnect phone. I clicked it and it said Motorola device or something like that, it was sensing my defy! defy drivers were wipe out due to bad flash. I had mototola drivers so I clicked on update and searched for mototola drivers on hard drive. I had rsd lite on and it recognized the defy after driver update, even though the bootloader screen was not on and just the white led was on.
decided to flash rom that have me bootloop and it flashed it but still gave me a bootloop., by the way, the update part of bootloader showed up after a while.
Second part of solution: googled problem and found out that the phone has a stock recovery. its the robot with the triangle exclamation mark. when you get to it you have to touch the extreme lower right hand corner of the screen to get to where you can wipe data and cache. when you start wiping data / cache you have to press on ok?? on lower left hand of the screen repeatedly until wipe is complete. then reboot and tada it boots up to stock tmo USA defy.
this is the stock rom I used : JORDN_U3_6.36.0
F Y I
if you ever try to flash a rom and it just bootloops, just go into stock recovery and wipe data and cache and you should be able to boot into android.

I'm Mc Gayvering my phone. Just tried a led directly connected to USB and fried it
This is my last hope

Is your phone worked?
I have the same problem. I try many ROM,But all of them dosn't work.
When I put in the battery,it shows Bootloader,When i flash a ROM use RSD，the phone always display SW Update In progress... Then the RSD's status is error verifying code group XX(XX=32/33/39/40 etc.) checksums.
What should I do?
THS.

Help :mad :
Hello, I'm having a problem with my Motorola Defy, he is not popping no FBS. he is not linking a black screen, but the white light is on, but when I try to install the SBF appears SW Uplidate im Progress .. can someone help me

wesleybinho said:
Hello, I'm having a problem with my Motorola Defy, he is not popping no FBS. he is not linking a black screen, but the white light is on, but when I try to install the SBF appears SW Uplidate im Progress .. can someone help me
Click to expand...
Click to collapse
dude this is all same **** u flashed wrong sbf.
flash the sbf service flash higher or same version which came by default wid ur phone.
flashes here http://and-developers.com/sbf:defy

[Q] First blue screen, now boot loop.

Hello XDA-devs forums,
I'm having an issue since yesterday.
I have rooted my Huawei Ideos X5, and it ran fine for a day or so.
However, when my battery ran out it shut down into a completely blue screen.
When I tried booting it again, this just showed me a blue screen as well.
Now, I fixed this issue by connecting the phone to my PC after booting it with the Vol+ and Vol- pressed.
(So you get the pink/purple screen)
However, when I opened the phone on my PC, all I saw was a "239 MB" "empty" space, and it should have ~2GB..
I placed a backup copy I saved of my "image" folder in that 239 MB storage, and it booted.
However, today I hooked it up to my PC again to see if it magically changed..
And I couldn't access the 239 MB space anymore.
When I tried fixing the issue with a reboot of the phone, that just caused it to get stuck in a booting loop.
So now I'm stuck with a phone that keeps trying to boot itself,
and I can't access it on my windows PC.
I can, however, access 4 different folders of the phone on my linux notebook.
Now, my question is: can someone with a good understanding of problems like these please help me out?
I'm getting kind of fed up with it, as I've only got the phone for 2 days now.
Thank you in advance, and thank you for taking the time to read this.

Have you tried removing the battery for 5 minutes and then putting it back in?
After this, what happens when you press VOL+ and Power?
How about if you press VOL+, VOL- and Power, without the USB cable?

Hello Katu, thank you for posting.
Regarding your questions:
Yes, I have tried to take out the battery for 5+ minutes- it didn't change anything to the situation unfortunately..
If I press VOL+ and Power at the same time, the device boots into recovery mode.
In this I have tried to format the device in order to reset it to factory defaults, but this did not help either.
When I press VOL+, VOL- and Power, the phone boots into the pink/purple screen.

Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]

I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.

PlanDreaM said:
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
Click to expand...
Click to collapse
Well, I used an original ROM:
U8800 V100R001C00B136(Overseas General version)
And that resulted in the boot.img being corrupted, so I can't even overwrite that anymore.
Also, this is what I see when I hit VOL+, VOL- and Power at the same time to boot into safe mode, and connect it to my PC.
img69 [dot] imageshack [dot] us/img69/244/10101191548pm.png
julle131 said:
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
Click to expand...
Click to collapse
I installed the official B136 rom, and after it rebooted, it would just hang on a black screen.
(it used to show the IDEOS or Android logo when it booted)

Hmm mine came with this Rom
U8800 V100R001C00B135SP01 ( general )
Looking at your name you're from the Netherlands ( so am I )
where did you get this 136 version from ?
I would try to put this one on it
You have to put the 'dload' folder into the root of your SD Card,
then boot into boot-loader, after that it'll automatically flash back to the stock Rom.
1 Format SD card
2 On the SD card, create "dload" folder
3 Put the unzipped Rom into "dload" folder
4 Then boot to bootloader (pink screen)

Yes, mine came with that version as well.
However, I couldn't find it anymore and thus downloaded the version I said earlier.
Also, I did everything as you described, except step 4.
You have to boot to recovery instead of bootloader. (VOL+ and Power)
Anyways, I managed to get ClockworkMod's recovery.img on my phone,
and from there on install a custom ROM on the phone, which magically got it working again - even though it didn't work earlier.
Thank you for reading my thread and taking the time to reply to it.
My issue has been resolved.

just for the record, flashing a stock rom is different from flashing a custom rom..
the 4 steps described by Gman2oo6 is the correct way to flash a stock rom (and it is written clearly in the document that is in the stock rom zip file)
[edit]
step (1) is not a necessary step though..

Yeah, I noticed that.
What I did was format my SDcard with FAT32,
and put a custom rom (update.zip) on the SDcard.
I then booted ClockworksMod Recovery and installed the custom rom from the SDcard.
When I tried installing the stock rom, I just followed the PDF file's instructions that came with the stock rom.

hey i udated to GB 2.3.4 (official)and i didnt like the it cuz the wifif ddnt work and the bluetooth also the DATA so itryed to downgrade to 2.2.2 original official and it did the 2/2 steps intalled and when it restarted it did not want to turn on all that happened was it vibrated and thats all so i left it on like that and when the battery died i plugged it in to the AC and the LED turned on red and the touch kkeys also but not the screen so i really NEED help!

Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started

i tryed it
nope nothin good happened all that happens is a blank screen with nothin on ,LED is off and the touch keys are off. it justz vibrates and when i put the battery it turn the LED on to red and the touch keys turn on but then like 5 min later the LED and keys turn off

astewart said:
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
Click to expand...
Click to collapse
ok heres what i did i wanted to upgrade my phone to the newest version GB 2.3.4.So what i did was download the update and i followed the installation steps i successfully updated to Gb 2.3.4. so like i was checking how it look and the new feature but when i wanted to go on the android market i went to setting and turn on the wifi and it said Error and then i tried the Bluetooth and it said Error also so then i put my SIMs card in and i was like imma use DATA then and when i restarted my phone it had service but no HSPA+ or Edge or GPRS so like i just hatted my phone from their so then i was trying to root it but iddnt know how to do that so like i read this website and i got the UPDATE.APP or 2.2.2 AT&T did the same steps of the installation of BG 2.3.4 and it went to the process and 1/2 stepp good it passed and then 2/2 also passed it installed it and when it said Successively Installed it said Restarting and the scrren turn of and it vibrated and thats all that happened and i left it like that for the whole days and nothing happened
Do u got any idea?
When i connect it to my laptop it says installing drivers .then its says sucesfully installed drivers ready to use. so then i got to Device Manger and i check what has been installed and their it said USB Human interface device and HID-compliant device WHAT DOES THAT MEAN??

Not sure about the HID (human interface device) probably just the way windows sees the device for interfacing with it. With regards to the not booting I have read a lot of people saying that you need to factory reset and clear cache after the upgrade/downgrade. With the phone off, turn it on by long pressing volume+ and power on button till you get the blue recovery screen and from there you can reset factory/ data and also clear the cache. from what I see this should clear up the problem and start up. Please read this thread, it may help you somehow..... http://forum.xda-developers.com/showthread.php?t=1420728
Hope this helps a little

U mean Boot recovery and imma try it and thanks ill check it out
Sent from my MB300 using XDA App

all that i know is that if u customized your partition, it'll bootloop,
so go back to stock-partition ^^

How do I do that got like the steps or video?
Sent from my MB300 using XDA App
when i downgraded to 2.2.2 i installed this V100R001C00B138SP04CUSTC185D002
http://forum.xda-developers.com/showthread.php?t=1251250 got it from that link

Looks like you are not having much luck. Did you try to factory reset?

astewart said:
Looks like you are not having much luck. Did you try to factory reset?
Click to expand...
Click to collapse
well how do i do that do i need to got to the purple/pink screen or bot recovery cuz i cannot access that my phone doesn't do anything pretty much

[Q] Bricked S4

I'm not sure what type of "bricked" this would be but, I tried to flash my Canadian Fido S4 I337m with a MF3 modem. I did this through Odin Mobile Pro. At first it was all good, it started to restart with a blue android figure. It started to take a really long time and nothing was happening so I decided to turn the phone off. Now the phone won't turn back on and it won't connect to the PC. I have my backup saved on my sd card but I can't get the phone to load at all.
It's currently stuck the battery charging power up screen. I can't post a picture since I haven't posted 10 times apparently... So it's the grey battery icon, the circle in the middle isn't moving whatsoever.
Did a battery pull, tried starting it in safe mode, and tried to restart it in the download mode. All of which have failed.
Any advice would be helpful.
Thanks
*Update*
The blue android figure is back. Does anyone have any information on how long this little android guy is supposed to be around for?

benjiyap said:
I'm not sure what type of "bricked" this would be but, I tried to flash my Canadian Fido S4 I337m with a MF3 modem. I did this through Odin Mobile Pro. At first it was all good, it started to restart with a blue android figure. It started to take a really long time and nothing was happening so I decided to turn the phone off. Now the phone won't turn back on and it won't connect to the PC. I have my backup saved on my sd card but I can't get the phone to load at all.
It's currently stuck the battery charging power up screen. I can't post a picture since I haven't posted 10 times apparently... So it's the grey battery icon, the circle in the middle isn't moving whatsoever.
Did a battery pull, tried starting it in safe mode, and tried to restart it in the download mode. All of which have failed.
Any advice would be helpful.
Thanks
*Update*
The blue android figure is back. Does anyone have any information on how long this little android guy is supposed to be around for?
Click to expand...
Click to collapse
Download Odin 3.07 for the PC.... you flashed the wrong mode... I believe you flashed a US modem not a Canadian on... suggest NC1 can be found in the forum...
With the phone unplugged, press volume down +home+power if you get a warning, release buttons and press voulme up to go to download mode...
Start Odin.... important... take off auto reboot....
there are instructions on how to properly flash the modem... likely in the same thread you found the file.....
Flash only the modem.bin file inside the folder... do not flash the nonhalos file....
Most instructions sau flash once... reboot to download mode.. flash again....
Basically let me know if you can get to download mode... I tried to google blue android on screen but didn't find anything yet... first I have heard of blue... I have seen green dead ones though....

Gage_Hero said:
Download Odin 3.07 for the PC.... you flashed the wrong mode... I believe you flashed a US modem not a Canadian on... suggest NC1 can be found in the forum...
With the phone unplugged, press volume down +home+power if you get a warning, release buttons and press voulme up to go to download mode...
Start Odin.... important... take off auto reboot....
there are instructions on how to properly flash the modem... likely in the same thread you found the file.....
Flash only the modem.bin file inside the folder... do not flash the nonhalos file....
Most instructions sau flash once... reboot to download mode.. flash again....
Basically let me know if you can get to download mode... I tried to google blue android on screen but didn't find anything yet... first I have heard of blue... I have seen green dead ones though....
Click to expand...
Click to collapse
No, I can't seem to get into download mode. It just keeps heading on to the the blue android. I purchased a dongle jig to get it to download mode on ebay hoping that would work.
Method 1 Odin Mobile
Extract TAR and place modem.bin on Internal or External SD Card
Open mobile Odin (free version works but pro is awesome)
Select modem 2 and find extracted bin file
Press flash firmware button
System will boot to download
Hold power button for 10 seconds if download mode in green comes up.( should be blue)
Odin will install modem files
Done
This is what I was following. It said if it comes up as a blue android it's good.

benjiyap said:
No, I can't seem to get into download mode. It just keeps heading on to the the blue android. I purchased a dongle jig to get it to download mode on ebay hoping that would work.
Method 1 Odin Mobile
Extract TAR and place modem.bin on Internal or External SD Card
Open mobile Odin (free version works but pro is awesome)
Select modem 2 and find extracted bin file
Press flash firmware button
System will boot to download
Hold power button for 10 seconds if download mode in green comes up.( should be blue)
Odin will install modem files
Done
This is what I was following. It said if it comes up as a blue android it's good.
Click to expand...
Click to collapse
If you put the modem file on an external sd card.... maybe you could pull the card, put it in a usb reader and put the proper modem.bin file on the card and put it back in the phone and power it up.... see what happens. I am guessing it couldn't finish the process because you have the wrong modem file...... Okay so now I realize you are stuck on the mobile odin logo... (blue guy) search google for how to get out of that or go to the mobile odin thread and ask chainfire... it is his app....

I've got the problem fixed. I re-flashed my whole firmware and managed to get the phone into download mode using a USB Jig. This is for reference if anyone encounters the same problem in the near future.
Thanks for the help and advice though.