Database Users

[Q] Stuck at HTC logo boot screen.

I know this has been asked but i couldnt find the answer. I have Cope's gingerbread CM7 i booted the first time and it worked fine then i rebooted again and it just didn't pass the green htc screen. i waited 15 mins. what should i do? Delete and reinstall? format sd card? help please and thank u

I've seen a couple of things cause this...
1) The SD card may need reformatting... Of course (should go without saying), backup whatever you have on it first.
2) Pull the battery and try booting again.
3) If you're using CWM be sure you're using the 150MB partition setup for MDJs CM7 ROM.

dajakil said:
I know this has been asked but i couldnt find the answer. I have Cope's gingerbread CM7 i booted the first time and it worked fine then i rebooted again and it just didn't pass the green htc screen. i waited 15 mins. what should i do? Delete and reinstall? format sd card? help please and thank u
Click to expand...
Click to collapse
You using simple DAF flasher or CWM?

What's CWM?? im just using an sd build HARET and CLRCAD. i think i have the updated radio also. all builds work fine and this worked first time, now it just started to do that

dajakil said:
What's CWM?? im just using an sd build HARET and CLRCAD. i think i have the updated radio also. all builds work fine and this worked first time, now it just started to do that
Click to expand...
Click to collapse
CWM = Clockwork Mod which is used for flashing and backing up NAND roms. N/A to you as you are using an sd build.
As was suggested above, your best bet is to format your sd card and start again. Ensure you have a .50 radio - 2.07.50 or above IIRC

dajakil said:
What's CWM?? im just using an sd build HARET and CLRCAD. i think i have the updated radio also. all builds work fine and this worked first time, now it just started to do that
Click to expand...
Click to collapse
Well, its a time for you to use NAND builds. No more HARET and CLRCAD with WM 6.5
Do you know how to do that?

rtimoff said:
Well, its a time for you to use NAND builds. No more HARET and CLRCAD with WM 6.5
Do you know how to do that?
Click to expand...
Click to collapse
yea i know but i want to be able to easily switch from android to WM quick. if im not on my laptop i won't be able to change it back if im on NAND. right? anyways ill format it and see what happens

dajakil said:
yea i know but i want to be able to easily switch from android to WM quick. if im not on my laptop i won't be able to change it back if im on NAND. right? anyways ill format it and see what happens
Click to expand...
Click to collapse
hi,i have the same problem with yours,my bool loader start at linux then suddenly stuck in htc logo.what do i need to do?tanks

donnarose said:
hi,i have the same problem with yours,my bool loader start at linux then suddenly stuck in htc logo.what do i need to do?tanks
Click to expand...
Click to collapse
Do you have the correct radio version? IIRC for sd Android builds you need 2.07.50.xx or higher .50 radio.

[Q] quite agrivated

broke my old hd2. insurance sent me a refurbished model. flashed hspl, then nrg sencity nov 24 to get back to my previous setup. running core_droid_evo_0.8. was impressed droid brought evrything back to the way i left it. but.... since then the phone constantly freezes. tried hard reset. 1 out of 10 times it will actually finish booting after pulling battery, then to just freez again. I didnt flash radio 2.12.50. it came with 2.15.50.14, and that sounded newer. didnt think that would make this happen tho. any clue?

i appreciate all the views this thread got but. Ive tried the famous search bar and it never works! always says try back in 30 minutes. I cant sit here staring and digging thru pages of threads to find answers. at least shoot me a link to an appropriate thread please

If its a refurb then I'd return it to stock and tell them they've sent you a faulty handset.
Are you talking about freezing in WM or when your using android??
You could try reflashing after doing a task 29. Might be worth trying a different energy rom just to see if the freezing issues are still there........
If its android freezing, did you restore old backups? try running it without any backups and see if it still freezes.

conantroutman said:
If its a refurb then I'd return it to stock and tell them they've sent you a faulty handset.
Are you talking about freezing in WM or when your using android??
You could try reflashing after doing a task 29. Might be worth trying a different energy rom just to see if the freezing issues are still there........
If its android freezing, did you restore old backups? try running it without any backups and see if it still freezes.
Click to expand...
Click to collapse
ya freezes everywhere between splash screen and droid. I cant tell what if anything is causing it to crash. Ive had new phone for 12 hours and have pulled battery at least 100 times.

Personally I'd try and get another replacement.
If you dont wanna go down that route then you should start over from scratch (task 29, stock WM), leaving some time between the different stages of setting up your device to try and see when the freezing starts to happen.

are you running android off the sdcard?

M..N said:
are you running android off the sdcard?
Click to expand...
Click to collapse
__yes______

conantroutman said:
Personally I'd try and get another replacement.
If you dont wanna go down that route then you should start over from scratch (task 29, stock WM), leaving some time between the different stages of setting up your device to try and see when the freezing starts to happen.
Click to expand...
Click to collapse
maybe its just my pc but the search tool here isnt working. which thread has walk through for returning to stock rom, rom selection and this task 29?

boltz said:
__yes______
Click to expand...
Click to collapse
Which rom? And it freezes when using android or booting winmo?
Sent from my HTC HD2 using XDA App

boltz said:
maybe its just my pc but the search tool here isnt working. which thread has walk through for returning to stock rom, rom selection and this task 29?
Click to expand...
Click to collapse
See here for returning to stock (Section 8)
Task 29 is here..
You can get the stock roms from the 6.5 ROM development section.
If you have a Tmous model then be sure to grab the right one.
Android SD card builds are sometimes a real pain in the ass for no obvious reason.
Just because one worked on your previous setup doesnt mean its guaranteed to run smoothly this time round. If you restored a backup with titanium or something similar then try running the build again from scratch without restoring and she how she handles...

i renamed and copied LEOIMG.nbh to sd card. powered on to bootloader and nothing... no instructions just color bands

boltz said:
i renamed and copied LEOIMG.nbh to sd card. powered on to bootloader and nothing... no instructions just color bands
Click to expand...
Click to collapse
if you're using a 16gb sd card this won't work, I'd flash thru RUU or use a smaller SD card.
Also on your Android ROM make sure you're not copying it via MAGLDR because it corrupts data transfer

M..N said:
Which rom? And it freezes when using android or booting winmo?
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
booting energy21916sencity nov 24. then core_droid_evo_v0.8_desire.
I dont think it has anything to do with the droid version. It mostly freezes on energy splash screen.

orangekid said:
if you're using a 16gb sd card this won't work, I'd flash thru RUU or use a smaller SD card.
Also on your Android ROM make sure you're not copying it via MAGLDR because it corrupts data transfer
Click to expand...
Click to collapse
yes 16gb card is that problem. so do I flash stock rom , radio, spl all separate?

If you flash a stock ROM from the sd card then it wil overwrite SPL/Radio/ROM all in one go.
Try using a 2gb card.
If you dont have one you can always flash via USB.

boltz said:
yes 16gb card is that problem. so do I flash stock rom , radio, spl all separate?
Click to expand...
Click to collapse
flash task29 via RUU, then flash custom ROM via RUU, then radio 2.15.50 via RUU, then load the Android ROM via USB mode in WinMo or card reader, then try things out.
edit: flashing task29 takes away the need to flash stock, flashing stock then custom is pointless and actually worse than going task29 to custom, HSPL3 is probably not the problem here.

this is so frustrating!!! I've done everything to a T to get this phone back to stock and still wont boot. now stuck on "stick together" splash

boltz said:
this is so frustrating!!! I've done everything to a T to get this phone back to stock and still wont boot. now stuck on "stick together" splash
Click to expand...
Click to collapse
lol,
make sure it's the right stock, don't brick your **** flashing the wrong stock.
put it in bootloader manually by turning off the phone, then hold vol-down when you turn it on, while in bootloader hook it up to USB to PC, then run the RUU and reflash.
Personally I strongly suggest going task29 then custom, unless you want to return it to the store, just go stock.

i did the task 29 then flashed stock tmo 3.14.531 and spl and the radio 2.15.50.14 that was on it yesterday when i got it. it loaded once to stock initial setup and homescreen then froze again. this has to be a hardware issue. fuk a refurb

at least on boot screen it appears stock. requesting new phone

[Q] problem flashing pyramid

Hi there i have a problem flashing Pyramid HTC WWE 1.35.401.1 i wiped everything i have magldr and clk i used clk to partition my 2gb sd ext 2 1024 i used recovery for 5/180/5 but i always get error about image file on sd card 0 and sometimes it freezes to please waiting processing system, what am i dooing wrong please help

If you really have magldr and clk that is the part you are doing wrong because they cannot be used both. You have to chose one of them. But i think you meant cwm instead of clk.
Is the image corrupted? You can try downloading and installing it again.
Sent from my HTC HD2

rauschkugl said:
If you really have magldr and clk that is the part you are doing wrong because they cannot be used both. You have to chose one of them. But i think you meant cwm instead of clk.
Is the image corrupted? You can try downloading and installing it again.
Sent from my HTC HD2
Click to expand...
Click to collapse
i have magldr 1.13 and its the 3rd time i try to flash and it freezes at processing system please waiting, i don't know where i'm going wrong

bondocel said:
i have magldr 1.13 and its the 3rd time i try to flash and it freezes at processing system please waiting, i don't know where i'm going wrong
Click to expand...
Click to collapse
You need wait about 20 minutes when you see processing system
Sent from my HTC HD2 using XDA App

langthang said:
You need wait about 20 minutes when you see processing system
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
OK it worked but now i'm stuck at htc quietly brilliant logo for about 15 mins what should i do?

Anyone pls help i know i'm doing something wrong but what ? I really want that rom

Is there a specific kernel or sofware i need to instal before flashing rom?

the kernel is included in the rom and you do not need anything else. if you flash the rom the way it's described in the thread everything should work.

I tryed installing other pyramid rom but the same frozen at logo screen, i waited for about an hour before i took out the battery ,when i bought the phone it had nexus one rom installed, it is thd only rom that works. Maybe i have wrong spl or radio ?

MccM HD V6 sense 2.0...wont boot up...

Hi guys...I have just installed MccM HD V6 sense 2.0 on my SD card...after selecting cllrad then haret I get a white screen with htc in green...nothing seems to be happening after that..I have formatted the sd card as well...i have the latest radio on as well...just recently uninstalled gingerbread......please help!!!

shaz999 said:
Hi guys...I have just installed MccM HD V6 sense 2.0 on my SD card...after selecting cllrad then haret I get a white screen with htc in green...nothing seems to be happening after that..I have formatted the sd card as well...i have the latest radio on as well...just recently uninstalled gingerbread......please help!!!
Click to expand...
Click to collapse
How long did you wait for? This ROM takes ages to boot (first time). You seem to be doing everything right. Just try waiting for a while, when I first booted this, I thought it wasn't booting but left it alone for a while and eventually it booted. Don't worry, the next few bootups are a lot faster.

thanks for you reply....i waited about ten mins....
I also tried to install american android last nite...it just showed a grey screen with 'powered by android'...kept the phone on all night!!!!...nothing happened
so i thought i would install a new rom...how long should i wait?.....
my radio is 2.15.50.14
i previously installed tytungs gingerbread rom and no problem installing it but i found it very unstable..
I aslo hold down the volume key and power on before installing for the first time..should i be doing this??

shaz999 said:
thanks for you reply....i waited about ten mins....
I also tried to install american android last nite...it just showed a grey screen with 'powered by android'...kept the phone on all night!!!!...nothing happened
so i thought i would install a new rom...how long should i wait?.....
my radio is 2.15.50.14
i previously installed tytungs gingerbread rom and no problem installing it but i found it very unstable..
I aslo hold down the volume key and power on before installing for the first time..should i be doing this??
Click to expand...
Click to collapse
That shouldn't matter.
OK if you're up to it you could try installing a new Winmo custom ROM (that helped me when I kept getting FC messages on a ROM). There are plenty of guides, just HSPL and flash ROM I think.

hmmm dnt feel to confident in doing that!!!....how long should i wait when i get the htc splashscreen?

shaz999 said:
hmmm dnt feel to confident in doing that!!!....how long should i wait when i get the htc splashscreen?
Click to expand...
Click to collapse
Ten minutes should be enough.
Don't worry about flashing ROMs, I'm only 14 and I could do it. As long as you follow the guides to the word you'll be fine

ok...i will give it one more try before i flash winmo and hspl...can i email u if i get stuck?...i have spl 3.03.000

shaz999 said:
ok...i will give it one more try before i flash winmo and hspl...can i email u if i get stuck?...i have spl 3.03.000
Click to expand...
Click to collapse
Yeah feel free to PM me.

Installing MDJs_CyanogenMod7_v2.6_NAND but need help! ease!

Hi, with no success installing Hyperdroid I decided to install this ROM:
MDJs_CyanogenMod7_v2.6_NAND_A2SD+CWM.zip
Installed:
Radio - 2.15.50.14
HARDSPL - 2.08
Magldr - v1.11
CWM Rec - v3.0.0.5
I took Hyperdroid off by doing a task 29 and re-installing everything again along with the new ROM (above).
On restarting the device, the blue Android comes up but the phone doesn't go any further. I've left it for up to half hour and still nothing. Tried resetting several times and still the same thing.
What am I doing wrong ??
Also, is there a way to easily remove a previous ROM without having to taks 29?
Thanks

I don't know about MDJ's ROM's , but they are pretty much old.
I assume your problems are being derived from not using the proper partition size.
Installing CWM is not enough, you need the proper partition as well.

As far as I know MDJ never made and CWM builds; I recommend going with Typhoon CM7 NAND... way better than MDJ - and there is no issues as with MDJ not willing to provide the source of his ROM (in other words - it may do whatever and however and be unsafe from the financial perspective - you never can find out).

Thanks guys, I'll try Typhoon CM7 NAND.
Is the HTC HD2 supported as I've been on the CyanogenMod weblog and it isn't listed?
If not which can I use.

gurdevb said:
Thanks guys, I'll try Typhoon CM7 NAND.
Is the HTC HD2 supported as I've been on the CyanogenMod weblog and it isn't listed?
If not which can I use.
Click to expand...
Click to collapse
...Is that a serious question?
Typhoon CM7 NAND is CM7 and think about your question... is the HD2 an Android device in the first place? No.

HA HA so it is!
How can I get past the bootup screen - it is frozen on the htc logo in green.
I've tried flashing it again and nothing.
What is the recommended partition for this as this is the only thing I can think that I'm doing wrong?

go here http://forum.xda-developers.com/showthread.php?t=898913 download the 150mb partition if you're going to be using typhoon cm7 ( which is a fast, stable rom) and flash rom as usual in recovery. If you experiment with a bunch of different roms i would suggest downloading the HD2 Toolkit

You can also try Dorimanx Rom, which is also based on CM7.

try new rom like hyperdroid or typhoon, they good